137 modeli
Today an acquaintance of mine sent me the following image: I just had to make a sign of this. So here it is! New version: fixed typo.
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
this was quest for my friend, to replace lost cap to his outdoor waist water bottle, there was not any brand, hope someone find it usefull, it had unusual (to me) pipe thread, almost one inch diameter, “O” ring fits to the bottom of the…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pro snazsi otvirani a zavirani dveri od Ikea Lack stolku.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
>> Winners << Win Original Prusa i3 MK3S+ and a hundred of other prizes! To participate in this competition, you need to fulfil two steps: Use the provided image of Captain Bad Advice to create a collage of him getting involved in amusing…
A remix combining the good flying properties (my experience) of the Flying propeller toy by Harald Andersson and the coupling mechanism (square 5) of Strong Flying Propeller by Meister Edel I made this remix after testing for use with my…
commercial use This model is not released for commercial use. If you want to sell products related to this model, commercial licenses are available via direct message. description a printed case with a integrated belt clip for a motorola…
Parental Advisory Explicit Content logo in 3D. 5mm high.
Anatomicky přesný model ledviny s močovodem vhodný i pro výuku ve škole
I ran the print at 0.4mm nozzle and at .18 layer height. I did the print on my Ender 3 so I had to pause the print at the right layer height to change the filament. But print it to your liking and your preferred settings!
The Sandvich from TF2 arrives! This model stays mostly true to the original sandvich outside of some moving around of pieces so they don't clip into eachother, thickening walls, and flattening the bread a bit so it can sit flat on…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I had the original handle break so I modified it to be stronger. I also made it so a bigger spring fits in it.
A 608 bearing is needed for this spinner. Check out my other fallout themed spinner. https://www.thingiverse.com/thing:2346966 Print Settings Printer: CTC Rafts: No Supports: No Resolution: 0.3mm Infill: 15% Category: Toy & Game Accessories
English: Camera holder for baby monitor Philips Avent SCD923/26 for IKEA SUNDVIK cot. Easy to print! Print on the side, no support needed. Please don't forget to share a picture of your print. Czech (čeština): Držák kamery chůvičky…
This was a commercial project I worked on for a company but it is finished and now I have the right for distributing my work. If you want to buy this kit professionally printed, you can send me a message and we can arrange it. There is an…
Ive designed a little stand for the charger of the Motorola Advisor TPG2200 with space for an Shelly 1 smart switch. You can configure the shelly as an sensor so you can switch on smart devices when the integratet relais. You need the…
Dust cover for male DVI connectors usually found on graphics card and adapters. The print will fit tightly and will benefit from being printed in a soft ish filament. (Not TPE not PLA) Print Settings Printer Brand: RepRap Printer: Ormerod…
Nice bookmark, start with white and insert a pause after 1,80mm, then switch to black The yellow in the photo has been done with Ams system
A remix of a Motorola Advisor TPG2200 Homestation designed to house a D1 Mini microcontroller for esphome compatibility for homeassistant . This allows you to craft all sorts of smart home automations via homeassistant when you get an…
We were tired of always searching for pacifier in the dark so I made a bin for pacifier (or whatever you want to put in) which clip on the side of the Sundvik crib. The bin is in two part to allow for no support but a small assembly. I…
I made it for my friend, now i will try to print it. It's for 10 x 15 cm big hole. Edit: Click paws are now lower for weaker walls. Instructions Now is possible to change wall thickness on third line of "doors-margin.scad" file SCAD code.…
Your adVintage Fedora deserves a worthy stage! This is the answer: I am proud to present the latest addition to my Printables collection of 3D models – the adVintage Modular Hat Stand . It all begins with the ring . Designed in close…
This is book holder design to clip on the side of the IKEA Sundvik crib. I made two version. A plain one (easier to print) and a honeycomb version. The honeycomb is 25% lighter than the plain version, it's easier to see the book in the…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
Designed to be printed by color swap! The pictured print was done with NO MMU . Just color swaps :) photo & print courtesy of MakerPotato
to avoid a cable break at the plug of the power supply. Print instructions Category: Computer Summary to avoid a cable break at the plug of the power supply. Print Settings Printer: Anet A6 Bowden Rafts: No Supports: No Resolution: 0.2…
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ Sunlu Grey Transmission Distance: 2 PLA Default White Transmission Distance: 5 Swap…
Quick model release; Buffalo Steak Sandvich! Though it's not really a sandvich is it? Anyways wanted to get atleast one prop for every single class slot out before i decide to make everything else TF2 has to offer! Next upload (right…
You can display graphics and images to an external monitor with the Feather RP2040 DVI. This Feather RP2040 has all the goodies you know and love plus digital video output that will work with any HDMI monitor or display. It features the…
I was going to just clean up the couple of small issues I had with the original but Tinkercad refused to import the original or the PBI port door it was remixed from. I took the simple approach and just drew it again. I've done this in a…
I had difficulty finding any models for the REDARC RedVision LCD display so I made this model. This has a hole in the back if you want to screw fix it to a wall or something OR ive allowed for magnet slots in it two slots in the top…
When to turn on the washing machine and the dryer? I built an electronic advisor with #esphome , connected to #homeassistant , which tells my wife and me in a traffic light style when it is the optimal time to turn on the #washingmachine…
Door lock for IKEA Stuva box & Sindvik door. It's for the enclosure for my Prusa i3 MK2. Should print easily with no supports. You need 1-2 screws. [Update] Added another version where you can more easily control and adjust the lock…
I overtightened the original one and it broke. This is for a Sundvik baby bed but fits others that use the sam part as well
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. My other Gridfinity Designs: 1/8" Endmill Holder:…
I like self watering flower pots, but fully 3D printing them as watertight can be a challenge. I had this IKEA decorative flower pot, and figured I'd try creating an insert that turns it into a self watering pot. Seems to work nicely, and…
Took the heavily ported quadvictus RIPPCAR out of the other design and made it standalone. Print nose down.
IKEA Sundvik Crib - Height Increaser I needed to raise the bed by 60 mm and therefore made this one. It becomes a total of 100 mm where 40 mm is a tight fit around the leg. Print instructions Category: Household Print Settings Printer…
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. My other Gridfinity Designs: 1/8" Endmill Holder:…
Design for Ikea Sundvik bed. Slides onto the side rail to hold a water cup/bottle and extra small items. Requires supports.
Hello everyone, I have vectorised a illustration of the s75 air defence system and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the settings in the…
A Case for the LS-7 Touch Display distributed by Pollin- Elektronik here in germany. There are plenty "same-model" offers on aliexpress. The four little placeholders are optional. Just do me a favour... don't look to close and wonder…
Verzia úchytok a dorazu na stolík Ikea Lack pre kruhové magnety priemeru 10 mm a hrúbky 2 mm.
This adapter (holder) allows mounting the YI Home camera on the IKEA Sundvik bed. You just put the camera inside it and can easily mount it on the bedside allowing you to watch your newborn child all the time. Parts needed: M3 nut and M3…
Profile map of the Leadville 100 MTB course (Pre 2023 route). Fun way to commemorate the race. Easy to add your own text with date and finish time. Added a filament change in the attached gcode.
Simple tiktok gravity knife, requering two M3x20 screws and two M3 nuts. Sharing as an .step file for everyone to modify the tolerances if needed, my printer can be a little rough when it comes to printing files with dimensional…
It is easy print with no support material. Holes for M6 screws are without thread but the screw will cut its own thread (no need to tap the hole). To assemble you will need: -4x M6x12mm IMBUS screw -1x 60x60 casters with or without a break
This model will raise the SUNDVIK table by 6 cm. It is based on the model that will raise the crib by 6 cm, just other measurements to fit the legs of the table.
Use this to attach a roll of Ikea Måla paper to the 76x50 Sundvik desk. You will also need 4 x 3.5x16 countersun head screws and a length of 14mm dowel. I printed the brackets out of PETG with 40% cubic infill. The part of the brackets…
Created a replica of the Ikea Gradvis pot for printing in different colours and sizes, to complement different decorative themes.
MADVILLAINY - Madvillain Album Cover Art (2 colors) Please DM me for hfp files for hueforge Project: MADVILLAINY.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 210x210mm in size You may…
This is a remix of TG Tom's great E1 Mount with a modified width of 27mm to accomodate an IKEA Sundvik baby bed plus felt glider insert. Use M3 screws and nuts to mount the official mount that comes with these cameras. Thanks to TG Tom!
Advice Plate with Neodyms to mount on a Gasbottle Hinweisschilder mit Neodym Magneten zur Anbringung an Gasflaschen
I wanted a holder for our changing table to hold / store dry wipes and diaper bag rolls, but could not find any, so i designed this. This will fit a whole pack of dry wipes wich are commonly available in grocery stores in norway (10x10cm,…
A easy to print bottle holder for MAM bottles. Can be mounted on a IKEA Sundvik bed.
Divertido calendario de Adviento donde papa noel baja la chimenea hasta el día 24 que llega a casa. Una manera informal y decorativa de enseñarles a los pequeños de casa y no tan pequeños cuantos días tardará papa noel en llegar. Archivo…
---CZE--- Ahoj všichni Pokud máš rád rc autíčka tak jsi tady správně navrhl jsem tento otočný samojistící držák na jakýkoliv rc podvozek. na složení budeš potřebovat 4 kusy m3 x 30mm šrouby 4 kusy m3 matic a 1 kus m6 x 60mm. šroub m6 x…
This custom-designed bracket mounts directly to the upper trim panel above the rear window, providing a clean and secure mounting solution for most traffic advisor light bars. It offers a low-profile, factory-style appearance while…
IKEA SINDVIK door handle. 80mm in length but easily edited to whatever length you need.
100x160mm sign, reading "Take my advice: I'm not using it" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you…
English: My wife wanted to hang bag on IKEA SUNDVIK cot. So I made one massive for her. Print on the side, no support needed. Please don't forget to share a picture of your print. Czech (čeština): Žena chtěla na postýlku IKEA SUNDVIK…
I created this model because while the KVM was on the desk: The weight of the DVI cables made it pop up in the front. The cables from behind the desk were unsightly. The holes on the side allow for mounting using the built in rack mounts…
This is a replacement door for the back panel for the Atari 5200 for those looking to install Sophia 2 which has a DVI-I port! It takes some effort to take the old one out, and then pop this one in (takes a bit of effort). I printed with…
There is just something about items being printed at unusual scales that amuses me. I love miniatures from PrettySmallThings just as much as I love blown up versions of tiny things (like this Lego Christmas Wreath by slimchaps ). Combine…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 0 PLA Sunlu Gray Transmission Distance: 2.2 PLA American Filament Classic White Transmission Distance:…
Sonic's advice about not feeling down about valentine's day Backlit with a simple waterproof led strip
diseñe este embudo para llenar mis botellas de agua mucho mas facil, comparto el molelo por si a alguien le sirve imrpeso en pla con 20% de relleno y sin soportes
Paleta a bedna, která se na ní vejde. Na popud mého syna který chtěl k VZV z TEDi další palety a bedny, že si vytvoří sklad. Regály příště...
If you want to achieve a 5% inclination of your IKEA SUNDVIK cot for your baby, you can use this leg extension. Model contains also 2 holes for wood screws.
The Fish model I created for the WoWs contest. On all the videos Cpt. Bad Advice appears with The Fish - so I needed her because they look much better together :) Printing without supports is possible. Fish tank is made of rubber ball.…
"the enderchicken" once asked: "what about a bcar with bearings arrange like a rippcar" And so here it is. Quadvictus was used as the base because I never got good results from the trivictus variant, and you get a choice of triple o ring…
GPU - DVI Holder designed for 9600 XT GPU but can be used as a replacement for any GPU with DVI port.
Remix - made it a bit smaller and shortened the jaws - it now clamps onto a 2040 aluminium extrusion (perfect for the top of my Tevo Tarantula) I printed this at 25% infill, you can increase/decrease this to make it more/less flexible.…
The foot is made for rising the IKEA Nordviken dining table by 30 mm. Before attaching the foots to the table legs, the original gliders must be removed from the legs and plugged into the foots on the bottom side. Afterwards the foots can…
Mounting bracket for a StarTech 2 Port DVI KVM (D86A2-2-PORT-8K-KVM) switch. Printed in Prusament PETG Galax Black
100% výplň. Po vytlačení našrubovať na šrubu z opačnej strany dvierok. Moje modely sú aj na Marcel Lysák's Profile | Creality Cloud
In this new pot I was inspired by a style already seen but with a different shape suitable for potted plants Very easy to print with this vase Filament : I wanted to try a luminescent filament to be able to see it even in the evening
Reolink Baby Camera Crib Mount for IKEA Sundvik Safely monitor your little one with this custom-designed mount for your Reolink baby camera and IKEA Sundvik crib! Attach your Reolink baby monitor to the side of an IKEA Sundvik crib.…
IKEA makes a folding bed, Sandvika. It has four cross-braces for the center legs, made out of cheap aluminum with stamped rib - these have a tendency to bend and break, and you can't buy a replacement. It is likely trivial to make a metal…
A simple edit of a few pieces to allow for ruthrex M3 brass inserts to be used instead of nuts.
This is a small bracket to mount the rather chunky CAC-1010-A Active DisplayPort to Dual link DVI-D adapter from Club3d. I used it to mount the adapter to the back of my desk to alleviate strain on the cables and make things a bit tidier.…
I never got a chance to take photos of the actual sign, because I gave it to my friend at school. You can use it to put it on your door when you are trying to sleep or put it on someone's door to troll them (jk). In the slicer, you need…
Hello, Today I have a Winter Bear in a hat for you. Very nice figure. It is suitable for children and for diorama. It can be colored easily. My children love to color figures :-) Happy printing! I used PLA/PETG as the material. You need…
Headphone bracket for twistedvision81
Small hook for Ikea SUNDVIK desk , I prefer a backpack hanging rather than lying on the floor :) Printed in PLA
A mount that allows you to hide the adapter inside the case, and also brings out the sound output on a chinch connector.
100x160mm sign, reading "Parental Advisory: Explicit Content" as the record warning label Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which…
Ultra-Slim LED Batten Mount — V-TAC / Ledvion / Hoftronic compatible Replacement mount for ultra-slim LED batten fixtures with semi-round diffuser. The included OEM clips are flimsy and tend to slip — this print holds the batten tight and…
This model is a replica of the original IKEA designed by Inma Bermudez, I did it in fusion360 after accurate reverse engineering of the design. The few differences (in the inside, so invisible) are for the printability of the model. The…
I wanted to do some custome changing table for our newborn. Because we dont have very much space in our flat i decided to do it difrently. I drawed a hinges and bearing surfaces and printed it (the files are here). The rest is on you. You…
The stand is designed to raise small nursery pots with the plant above the rim of the Ikea GRADVIS vase. Personal experience: I'm using the stand for my small hanging plant at its tremendously boosted its growth since I fill the bottom of…
Diese Trenner werden mit einem zwischen Brett in der Schublade verschraubt.
Preface (scroll to the bottom for issues and TL;DR) Grab yourself a cup of coffee or tea because there will be a lot of reading going on. This is an article, not a description lol. This is just a heads-up before we start. If you simply…
Secure & Practical IKEA Light Holder for SUNDVIK Crib Enhance your nursery with this sturdy clip-on light holder designed specifically for the IKEA SUNDVIK crib . It allows you to attach the IKEA EBBARED light without the need for screws…
Original plugs get weak as the self tapping screws cut into the thin wall. This model has the wall thickened and thread partially pre-modelled. The thread is just lightly undersized for snug fit.
This is my first designed case for the Alphahound AB+G radiation detector. The model comes with optional front, back and USB covers. My Alphahound is one of my EDC. While the body of the Alphahound is robust, I carry it in my pocket and…
Ce fichier est destiner à protéger les Lecteurs de Carte RFID Parfois les société installe un lecteur RFID d'intérieur en extérieur et étant donner qu'il sont sensible au intempérie / Pluie / Vents / Autre Il s'intègre parfaitement…
