Wyniki wyszukiwania: dw

*~ Fully Printable ~* Butterfly Knife Balisong Design - CyberPunk Arasaka Remix Hardware Included In Print Files

Adjustable Stand for Smartphones, Ipads, and Tablets :: 100% Printable :: No Hardware

Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…

3dworkbech Revolver

Saddle Ruler Square with marking holes for woodworking inches

This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…

Cosplay Calipers (hardware remix)

Remixed version of Cosplay Calipers. What’s it for? When making cosplay/costume items, proper fitment is important! These calipers will help. They’re used to measure body parts, so you can accurately fine-tune wearable pieces you’re…

Cabinet Hardware Jig

This jig is strongly inspired by the jig of the well known blue colored jig brand. Although they have the same properties, they are not compatible. This jig has built-in measuring scales and a adjustable edge guide for easy positioning.…

Prusacaster - Correctly placed hardware

On the original Prusacaster, the hardware is placed 1.4mm too far to the left, but two more options exist for the Harley Benton hardware. mrstolarsky made a great new core with the screw holes for the alternative hardware, plus the…

Adjustment Jig for DeWalt DWE 7492 and DWE 7485 Table Saw

This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…

Hardworking dwarfs, gnomes for the garden

Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hardworking Dwarfs, gnomes for the garden. Very nice characters. It is suitable for coloring. My children absolutely love it :-). Important: If by chance the…

Dwayne "The Rock" John 117

Now we finally know what Master Chief looks like under that helmet. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.1mm Infill: 10% Filament: Polymaker PLA Matte Grey

rubber band gun (no additional hardware) pen spring preferred

Dwayne "the Vase" Johnson aka The Rock

No reason at all. None. I picked the egg because it had a nice chin & nostrils for vase mode.

SLED JIG FOR TABLE SAW FOR DEWALT DW745

SLED JIG FOR TABLE SAW FOR DEWALT DW745 Print instructions PET-G / ABS Infill 100%

uSDX Sandwich Housing (Lunchbox) by DL2MAN

This is the housing for DL2MAN uSDX Sandwich , so users that already have an existing Sandwich can print an easy housing. It requires to remove the electrolytic capacitor below OLED, replace it with a small tantalum capacitor and solder…

Dewalt DWE7492 Scale indicator clamp

This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…

Original Prusa XL Skeletton Dwarf Cover Back

Ich habe das Originale Dwarf Cover Back etwas abgeändert, sodass es etwas leichter ist, und die Wärme besser entweichen kann. Mir gefällt auch die Optik besser. Ich habe durch den leichten Gewichtsverlust keine negativen Veränderungen am…

Original Prusa XL Skeletton Dwarf Board Door

Ich habe das Originale Dwarf Board Door etwas abgeändert, sodass es etwas leichter ist, und die Wärme besser entweichen kann. Mir gefällt auch die Optik besser, sodass man hineinsehen kann. Ich habe durch den leichten Gewichtsverlust…

Dwight Schrute Buisness Card Holder : Improved.

Dwight Schrute Buisness Card Holder : Touch Up. But the bottom of the glasses still need to be thicker.

Akai Professional Fire Stand (a stand for the FL Studio hardware midi controller by Akai)

Akai Professional Fire Stand (a snap on stand for the FL Studio hardware controller by Akai). Connect one side of the stand (Front or rear) to the Fire and then lightly pull and snap the opposite side into place. Originally printed using…

Dwane “The Rinker” Johnson ready to print+gcode

the rock “thinker" w/ .gcode

Radwagon 4 caboose fishing rod holder

Dual fishing rod holder for a Radwagon 4 caboose. The caboose has 2 sets of 3 holes for the side rails. This rod holder is designed to fit on any of the holes on either side. If you use the side rails on the caboose you can attach them…

Dewalt DW745 Table Saw Overhead Dust Collection

Disassemble the blade guard and install this print using the stock hardware. I used a zip tie to secure it to the end where there is no hardware. Other solutions seemed like a lot of complexity where this “just works”. Fits 2.5" vacuum…

Dwarf waitress

My Model is about 75mm high, for tabletop size you have to resize on a slicer. I printet it on a Prusa Core one +

Dwarf, gnome, hobbit - magician, mage

Hello, I have for you a Dwarf, gnome, hobbit - magician, mage :-). All you have to do is color it and it can decorate a shelf, or play roles in your board game, or diorama. My children love it and I always color all the figures, according…

rude dwarf

Height 220mm

Dwarven Cook

I used basic PLA and a layer height of 0.05 to create this If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to enjoy. If you don't…

Dwayne "The Picture Holder" Johnson

Picture holder - The Rock. Fill: 15%.

Banus Vavrus dwarf

Eng: A small, insecure dwarf inspired by the world of game developers and endless online debates. Banus Vavrus is a stout, bearded fellow radiating that unmistakable “developer” self-confidence. He’s part of a crew of satirical dwarves –…

Park Tool Deluxe Repair Stand Tool Tray for PRS-2 & PRS-3 (No hardware needed)

This print fits Park Tool PRS-2 & PRS-3 Repair Stands with a 44.25mm (as measured) column. With an interior print of 44.5mm the press fit design has enough friction to stay in place without hardware. It has space for the following items:…

Bigfoot Woodworking Clamp Pad

With all my better clamps busy in a complicated glue-up, I had to relegate to whatever I could find to clamp a few boards together for cross-cutting. Some old clamps I have do only have metallic jaws, which keep circular marks in the…

Logo SolidWorks Maker

Not much to say, just my profile logo made into a printable thing. No hay mucho que decir, simplemente el logo de mi perfil hecho en una pieza imprimible.

Park Tool Deluxe Repair Stand Tool Tray for PRS-2 & PRS-3 (No hardware needed) - Bike Gear Contest

This print fits Park Tool PRS-2 & PRS-3 Repair Stands with a 44.25mm (as measured) column. With an interior print of 44.5mm the press fit design has enough friction to stay in place without hardware. It has space for the following items:…

Dwarven Toastmaster

The Model is about 75mm high and in the print mirrored to the picture. For a minitur about +30mm it has to be scaled down

Planter (Redwood Tree House)

Planter design with 3 versions. 1. Stand alone planter with no drain holes. 2. Planter with drain veins in the bottom and custom fit to drain tray 3. Planter with automatic watering system. Poor water down the back hole which fills a…

Edward Scissorhands - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 154.79x193.49mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…

Wall Art Geometric | Handwritting Name Circle Frame

As Geometric Wall art, you can write your initials or the characters you want with this form of writing. If you like this style and design, I will add all the alphabet letters one by one. You can show that you like it by liking and saving…

Redwood - Photographers Stand/Insert

Simple stand/insert to store the photographers figurines in the box.

box for 3 sandwichcookies - box für 3 Doppelkekse

This container helps me to transport my 3 cookies. I often only put 2 inside and enough sugarcubes for the coffee at my work. It is designed for 3 cookies with 70mm diameter and 15mm hight each. I printed it with: 2 bottomlayer 3…

Birdhouse Gadget Cache – Hidden Nail Puzzle with Decoy Hardware

This tricky birdhouse gadget cache is designed for one of our personal geocache hides, but it can easily be adapted for your own creative setups. It combines a visual red herring with a clever magnetic/nail-based locking mechanism, ideal…

Deadwing - Porcupine Tree Album Art

Deadwing - 2005 My David, don't you worry. This cruel world is not for you. So rest your head upon me, I've the strength to carry you. I love Steven Wilson and Porcupine Tree's music, so I created a set of 3D printable abstractions to…

Dwarf hats from hobbit

Print either a solo hat or twelve hats for the twelve dwarves. Under the hats is the J.R.R. Tolkien symbol. In picture colors of hats are according to book. Dark blue=Fili, Navy blue=Ori, Light blue=Kili, White=Gloin, Dark green=Dwalin,…

Riving knife keeper for DeWalt DW746 Table Saw

This is simply a shim that is the same thickness as the DW746 table saw's riving knife. When you remove the riving knife and blade guard to cut a dado, put this in where the riving knife was. Then tighten the nuts again. This will keep…

Dwarf Tokens from Hobbit

Print either a single pair of tokens or twelve pairs of tokens for the twelve dwarves. The symbols on the tokes are the first letters of each dwarf name in the dwarven alphabet. In picture colors of tokens are according to book. Dark…

BirdWatchAI Outdoor bird feeder with camera and AI Species detection with community feed (No subscriptions) print and build it all yourself (or buy it) includes software. NO SUBSCRIPTIONS! Your data stored locally, not in cloud (unless you want it there).

See www.BirdWatchAI.com for all of the details on how to setup the software. Free download. You can print/build it all yourself, or purchase a setup kit. See the live community feed of feeders currently running the BirdwatchAI software at…

Objects and structural and woodworking connections for teaching the subject Professional drawing - Objekty a konstrukční a dřevařské spoje pro výuku předmětu Odborné kreslení

Students will prepare joints for the purpose of teaching students in the subject of Technical Drawing. Studenti připraví spoje pro výuku žáků při přeměřování a rozkreslovní objektů Odborné kreslení.

DWARF TRPASLÍK

DWARF TRPASLÍK

Bird Feeder for TapoC113 camera. Go to www.BirdwatchAI.com for all details on AI species detection DIY.

See www.BirdWatchAI.com for all of the details on how to setup the software. Free download. You can print/build it all yourself, or purchase a setup kit. See the live community feed of feeders currently running the BirdwatchAI software at…

The Rock - Dwayne the Rocktopus

This is a reconstruction/remix from the original one that you can find on thingiverse here . Please, for any issues contact me or leave a comment, I will replay as soon as possible!

3DWORKBENCH 9mm Simple Concept Pistol

Hedwig

Hedwig. She would look great in a Christmas Tree. Updated with flat bottom (12/3/2023) thanks Challapenjo - removed old files. Origional Low Poly: "Low Poly Snowy Owl Figurine 3D Scanned" (https://skfb.ly/IFuQ) by iontrades is licensed…

Dwarf Paladin 28mm (supportless, FDM friendly)

A dwarf tank/paladin The detail featured on the shield is inspired by an architectural detail of an Art Nouveau villa in Lodz, Poland. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a…

Dwayne "The Duck" Johnson

Size: 10cm x 10cm x 7,7cm To legally sell PRINTED models, you may obtain my permission through this link: https://www.patreon.com/SpikeMix3D

Solid Woodworking Marking Gauge

This is a woodworking marking gauge, the only thing you will need to add is a 40mm socket head bolt and an hex nut. For the long body I suggest to use Brim to ensure the adherence to the printer bed. The tool in the image is printed with…

Snowy Owl (Hedwig) with flat bottom

Remix of the snowy owl Hedwig by Peter Farell with a flat bottom (for an easier print)

The Rocktopus (Dwayne "The Rock" Johnson)

The Rocktopus is one of the funniest 3d models I've ever printed. NO SUPPORTS NEEDED Might want to use a brim or raft for better bed adhesion. I just used slower first layer speeds and it printed fine. This is an original design by the…

Gridfinity Hardware Storage System - BETA

TLDR: Here are some drawers for the 5x4 Gridfinity Storage Box by Pred, and a custom box remix that compliments them. UPDATE: The Official Release of V1 of the Gridfinity Hardware Storage System is soon! I have been making a lot of…

Dwarf DnD

This is one of the characters from my DnD game. Hope you like it!

Tetrahedron To Help Surface Treatment | Painters Triangle | Woodworking / Paint Cones

A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…

Parametric woodworking marking-gauge /w fast-lock

This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…

4.7L Mini ITX case, easily printable (2 major pieces), sandwich layout, no extra thread inserts, standoffs or feet required

This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…

Lego Dwayne

This is a lego model of Dwayne Johnson, I have not yet had the chance to print it as my printer may not be able to print the detail in proper minifig scale (the model should be to scale at 100%) so pls comment if it works!

3Dwork SLA/Resin Calibration Test

More detailed information and guide → English Spanish At 3Dwork we have set up an all-in-one test with what, from our point of view, we believe are the most complete tests to adjust our resin printer: Among the tests included: (1) Steps,…

Dune Flexi Sandworm. Print in Place. Support Free.

0.15 to 0.2 mm Layer 5 to 15 % Infill Support Free For extralarge version glue the parts is recommended Optional Teeth 0.1 layer Under 55 mm/s

Gridfinity - Solidworks Template

Thanks to Zack Freedman for the awesome Gridfinity concept. I remade it in SolidWorks for easy configuring. Just use the equations to change the x and y size, and the depth to move the main extrusion down. then add your features for…

Rugged Box, Parametric/Customizable, No Hardware

Rugged customizable box with free moving hinges and a firm latch. Scales well. No hardware required, just use filament through the hinges and latch. I put a small drop of CA glue on the ends of the hinge and latch filaments to prevent any…

The rock - Dwayne the Rocklobster

This is a reconstruction/remix from the original one that you can find on thingiverse here .

Parametric Gridfinity Solidworks

This Is a port of the Gridfinity box to Solidworks and it is smart and fully equation driven file. Credit for the original design goes to Zack Freedman. All I did was port it to Solidworks. Link to original files…

DeWalt DWE7485 Table Saw Zero Clearance Insert

I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…

Spherical Parallel Manipulator (No hardware required)

Credit where credit is due. I made this model based on a short video from MakeBreakRepair 's youtube channel about it. *NOT MY VIDEO* Thought it was a cool neat weekend project. Managed to get it no hardware required by using print in…

Mail owl with space for a letter (with and without log) Harry Potter Hedwig style

The best way to print the owl is the log in wood filament and the owl in white. In this way, you get Hedwig the owl from HP You will find the owl in 2 versions. The owl directly on the log The owl and the log separately, in that way you…

ScrewU-nit Hardware Organizer

NEW SIZES AVAILABLE HERE: https://www.printables.com/model/778060-screwu-nit-hardware-organizer This is a reimagined remix (HUGE UPGRADE) of the great Modbot Voron Hardware Organizer. (More Drawers can be found on Thangs) PRINT SETTINGS:…

Dwayne the OctoOctoRocktopus

This OctoOctoRocktopus has 57 heads or should I say Pentacontaheptagon . This is a masterpiece. DOWNLOAD NOW! Print large since heads become very small.

Dwarf Christmas tree ornament

A classic, stylized appearance, featuring a tall, ribbed winter hat with a small pom-pom on top with a snowflake in its hands. Simple, elegant, modern.

Dwayne "The Rock" Johnson Head

This is the head of a man who goes by many names, and with this model you can create a Dwayne Johnson of your own and add to his list of nicknames This model isn't a great print by itself to be honest, but it is very easily modifiable

STL Hardware Parts - Nuts, Bolts & Washers

A small selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. M10 Washer M10 Round Head Cap Bolt - Thread Pitch 1.5mm M10…

Dr. Smolder Bravestone - Dwayne Johnson

Statue of Dr. Smolder Bravestone / Dwayne (The Rock) Johnson from Jumanji: Welcome to the Jungle. I tried to capture every detail and that's why it's probably my shortest project in one piece. Specially designed for the Prusaprinters…

Dwarf Miniature

A dwarf miniature for your boardgame. Print instructions Not easy super easy to print.

More figures for Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu, Cyndaquil, Totodile, Bulbasaur, Squirtle, Charmander, Moai, Football Player

If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…

3DWORKBENCH Arca Ignis Assualt Rifle

FlashForge Adventurer 5M Drag Chain Kit (No Hardware Needed)

Hello, This is my first ever post and also creation I made for the FlashForge Adventurer 5M/Pro (AD5M) series printer. This kit allows the AD5M to have a drag chain that is not only minimal, but also keeps the new filament sensor in the…

3DWORKBENCH Rail Blaster

Thank you for checking out my page! If you’d like to support my work, consider subscribing . As a member, you'll gain access to **all my designs** along with **commercial rights** to sell physical prints of them for as long as your…

FlashForge AD5M Build Plate Handle (NO HARDWARE)

Easy build plate handle for aftermarket AD5M plates. I recommend printing in PETG or better. Presses together with pliers. Glue is optional. It is a snug fit. UPDATE 1/18/25 Slimmed down the profile some for v2.

Butterfly Knife / Balisong Toy (No Hardware Needed) remixed training blade

Balisong butterfly knife toy. If you beginner in flipping knives i recommend printing mine remixed version beacuse its more durable. Oryginal version is of course prettier but standing prints are less durable. Print settings: Layer height…

Hedwig - Harry Potter Owl Planter Vase

Hedwig - Harry Potter Owl Planter Vase

Dwayne the Croc Johnson

print and then screw into base leaving a gap between the head of screw and Dwaynos head, make sure the screw head is just slightly larger than the hole in the crocs, push the screw through the hole and TADA Dwayne the Croc Johnson

STL Hardware Parts - Gears

A selection of gears from the STL Hardware Parts library. print at 0.12mm and add brim and/or supports as required. Bevel Gear Internal Gear Gear Rack Ratcheting Gear Ratcheting Pawl Round Bore Worm Worm Gear 90° Crossed Gear Ring Gear…

RAK Meshtastic Starter Kit - No Additional Hardware Case

No supports needed. I recommend 0.15 layer hight and 3 shells. Fusion 360 file included! Check out a video about this case by Matt Reviews It . Order a printed case from AltaVox and support Meshtastic through Open Collective

World of Warcraft Dwarf with complete Armor and Weapon

World of Warcraft Dwarf with Armor and weapon. Customer ordered this from us and backed out. I thought it looked great.

Drunk Dwarf

A dwarf after a tough weekend ;) Length: ca. 14cm (Scan with Einstar)

Dwayne "The Rug" Johnson AKA The Rock Articulated Slug

Credit to original creator: https://www.thingiverse.com/thing:5148846 Printed at scale 150%, and added custom support for the chin.

Edward Scissor Hands... Hands.

Uploaded authorized by the original modeler Indigenous Effects . Check him out. There are two options of covers: 1: Option cover etc… It is compatible with the swing set but are “plain”. (Yes the parts list photo is a little it chopped…

Print in Place Rugged Box (no hardware needed!)

Make sure when you slice it that you can see the hinges separated and not printed together. In OrcaSlicer you might have to right click and separate into parts with the STL. You might want an outer brim and support for the latches, but…

The Fast and the Furious Sandwich Shop (For Hot Wheels & 1/64 Scale Cars)

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base is also available from $5! Contact me to discuss what you want! If you like…

Garden Gnome, Dwarf

Hello, Welcome to my profile, full of models and miniatures :-) I have a Garden Gnome for you for a diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-). Important: If the figure…

Windy City Woodwinds Series 56 Saxophone Mouthpieces

When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 56”. I have…

Angle / Corner Clamp woodworking

Hardware: 4 x M10 nuts (self locking) 1 x M10 Washer 1 x threaded rod M10 - 200mm lenght Threadlocker Settings: 0.20mm Standard +custom settings: Wall loops: min. 5 Outer wall: 25 mm/s Infill 30 % supports are not necessary ABS / PETG…

WindWarden Upgrade Elegoo Neptune 3 Pro Plus Max Stock Hotend 5015 Fan Duct Adapter Beta V0.4

For Volcano hotend use https://www.printables.com/model/641666-volcano-windwarden-upgrade-elegoo-neptune-3-pro-pl Innovative Efficiency and Style - WindWarden 5015 Fan Adapter Model for the Neptune 3 Pro Plus Max Stock Hotend 3D Printers.…

Dwarf Helmet

Summary https://grabcad.com/library/erebor-dwarf-helmet-1 Originally inspired by the helmets worn by the dwarven warriors of Erebor, I liked the shape of this so I tried my best to make it printable (with permission from the original…

Parametric Simple Custom Box Maker, FreeCAD Generator, No Hardware Required!

You've got a thing. Now you need a box for it. But designing boxes is so tedious. You have to get the hinges right. And the latch has to be right. And it all has to fit together, and be proportionate, and that just sounds so much like…

Squidward house for aquarium/fish tank

I divided this model into different parts to minimize supports. I've added a small tolerance in the holes and tabs that connect each part, but you may need to adjust the horizontal expansion in your printer settings or glue the pieces…