100 modeli
Wanted some protection for my spare LP-E12 Battery (Canon EOS M50). Inspired by the case of @tomschoenlau I made a modification of his “Battery cover Canon LP-E17”. Tested with an original Canon LP-E12 and a hähnel HL-E12 (printed at…
Wydruk około 1,59 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Second set of Sonic figures based on Team Dark. Set includes... · Shadow (may make a second version with a less intrusive support pole) · Rouge · E123-Omega, Replacement Minigun, Base, and Outer Base (STILL PAINTING WILL UPDATE PICTURES…
This is my E12 series resistors storage box. 96 drawers. Box size: 195x130x60mm. Drawer (inside): 13x13x58mm.
This is an iphone12/iphone12 pro with Case mount for a Sprinter 2019+ (VS30). Inspired by another mount but redesigned from scratch to make it easier to print and remade for the iphone12/iphone12pro. Print instructions 15% infill, in PETG…
A simple case for LP-E12 batteries, used by the Canon EOS M50 for example. It can hold 4 batteries which should fit snugly. You can see a timelapse of my print here: https://youtu.be/Xd44k17qnrE
iPhone 12 and 12 pro case with a hexagonal tile pattern. This case protects the screen as well as the camera lenses
Warning: If you make this, you will be sticking diy electronics into expensive cameras. If you fry something, that's on you. Not a recommended project unless you are familiar with the components used. Make this at your own risk. Canon…
Primarily designed to be used with the AE1200/AE1300 platform of watches but could really be used with any ones that could fit these adapters. I've included files for compatibility with 1.8 and 2.0mm spring bars as I won't lie I don't…
I use magnet holder in my car, so I want to make the thickness thinner. And the hole for power cable connector and speakers are large, so it makes printing difficult. I changed the design a little bit. I use RepRapper flexible filament.…
DO A TEST PRINT BEFORE PRINTING A BUNCH This was made because some soffits have part of the rafters sticking out below them which makes it difficult to property align the lights. A solution is to buy long thin pieces of wood…
This is a remix of El_Terla's excellent work. It's just shorter so it won't hit the build plate when using a cheap MK8 hotend made for Ender 3. Fits right in and uses existing screws. All you need is the printed part. Print in PETG if…
I created a full E12 series of resistor labels for the 1x1x1 box and drawer with 3 comapartment. In future i will add more label for extending some values from E24 series and also add labels for small capacitors. I did a manual filament…
This is a e12 lamp socket that I created to use as the basis from some Christmas lighting projects. Feel free to modify and use for your next lighting project! I printed it using PLA+ and have yet to see any issues from heat, others…
8in moon lamp model https://www.thingiverse.com/thing:3532973 IKEA STRÅLA Cord set https://www.ikea.com/us/en/p/strala-cord-set-white-90371505/
This is a case for iPhone12mini. When printing, please print "iPhone12 mini_bumper" and "iPhone12 mini_back plate". Depending on the model you are using, some processing such as shaving with a file may be necessary. It can also be used…
I found some Holder, and used some Ideas but i want them Slimmer. So i tried a remix and then i made them new
These are replacement brackets for the 8mm linear rod used on the Y axis of the Anet E10, E12, and E16. They are open ended which allows you to use longer linear rods if needed. I have 500mm rods on mine and they sit flush on the front…
This model consists of remixes of several models. I made it according to anet e10 printer, but I think it will fit all printers with wheels in 20x20 profile. There are a few flaws in the model, but I made it work with a few interventions.…
I need socket nuts or retaining rings, whichever you would call them for some e12 candelabra sockets. Modeled these and they fit perfect. Made a bigger one if trying to install into a bigger hole or shade.
The E120 outdoor holiday lights come with only a small amount of clips. I'd gladly shill out another $15 for some more clips, but they currently aren't for sale. Instead, they expect your installation to be “permanent” with double sided…
This is a stub to cover empty slots of garden lights or Christmas lights that use E12 lightbulbs. It has a Phillips 3 head to screw it in place.
The battery holder can hold 4x Canon LP-E12 batteries (standing vertically) on a 1x2 Gridfinity plate. The charger's plate uses a 2x3 Gridfinity base.
Replacement Plastic-Clip for IKEA SKOTTORP (19/33 cm) lampshade for E12/E14/E17 Lamp-Socket Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 100% Category: Replacement Parts
Bmw E30\E21\E12 - interior dome light switch knob replacement. OEM-numbers: 63 31 1 363 234, 63 31 1 367 353 Reproduced with the dimensions of original part. You can find the best way to place this model on the printing table at the…
made this to convert a portable tire inflator to take a 12v battery instead of a cigarette lighter. can be modified to adapt anything to use a skil battery uses 6.3mm crimp spade connectors
I tried to copy the original (the white one in the picture). Printed in PLA but I guess some flex material might be better... Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2mm Filament: RedLine…
I wanted to make some of the lithophane lamps here: https://www.printables.com/model/225160-lithophane-lamp using the lamp holders I purchase from here: https://www.amazon.com/dp/B07Z2PNNTG but they only come with half the number of nuts…
A battery cover for the Canon Battery LP-E12 Print instructions Category: Camera
Made this as a reference when modeling my case. Figured other people could use it for theirs! Dimensions are based off of the dimensions on the product page, via the product images. I would say this cooler is within ±1mm so its not the…
Corolla E12 (or might fit some other Toyotas) clip, which in my case replaced coin holder which was useless for me. Category: Automotive
The Rocket Strap! (SE125v1) All mechanical parts print in place No support required Robust Design: The design orientation in the horizontal position makes for much stronger cylinder-shaped mechanical parts. Prints in as little as six…
Cover for the Canon LP-E12 Battery, optionally with numbers to keep track of batteries. You can use the fusion file if you need more than numbers 1 to 3. (EOS 100D, EOS M, EOS M10,EOS M50,EOS M100,EOS M200, etc) I designed this without…
This is only the modified part - see the original model for the rest with instructions. I really liked this model but wanted to use a corded lamp, so I modified the lamp mount to take an E12 push in socket with switched cord -…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
12mm Y Rod holders for Anet A8 Plus, E10, E12, E16. Created these after the stock flimsy 8mm rods got grooved out. So I decided to replace them with 12mm rods. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
На работе возникла идея смоделировать некоторое крепление для Микротика в служебную машину. Главное - оно не должно дребезжать и не должно бесить водителя =) За 16 часов получилось что-то построить, и около 10 часов заняла вся печать.…
Cover for Amazon item: US E12 bulb holder https://www.amazon.com/Ceramic-Standard-Medimun-Holders-Halogen/dp/B0894CFDRJ/ I have made this for ‘Cool Mouse’: https://www.printables.com/model/548252-cool-mouse-lamps Max 40W bulbs. Print in…
Battery holder for the Canon LP-E12 Battery for the Gridfinity system. Holds 5 Batteries Uses 2x1 Gridfinity Squares
Cover for LP-E12 Battery
I couldn't find any satisfying E12 light bulb socket so I decided to make this adapter for an easy to find (at least around here) candelabra socket. It has a 28mm base and comes with a matching nut. To assemble, remove the metal part from…
I printed them at 100% infill with PLA so they are sturdier, people can experiment for themselves. Distance from END Stop is the same as on original.
It is made for bearings outer diameter 15 mm, inner diameter 8 mm. Because they are printed in PLA i printed them at 100
Print three, install in bumper recesses. Should raise the bumper somewhat, for it not to get stuck under stuff. 3mf and STL are the same model, pick your poison. Cutouts are to impede possible IR sensors as little as possible. Should…
On UK Corolla's we had a blanking plate where a clock is normally placed in other markets. The clock is normally integrated into the audio head unit, however when you remove that and fit your own aftermarket head unit, you lose the clock.…
Mount for DLE 111cc or 120cc engine ignition module. Printed in PLA with or without supports.
A replacement sunvisor clip for BMW 520 E12 for when the original (eventually) breaks. The pictures are a bit dark, but it fits. Use PETG/ASA/ABS or similar. PLA will deform during the summer.
Came out of trying to print phone cases out of Taulman PCTPE, but they would always have issues with bridging, and splaying, so printing in two parts allows it be more form fitting and less bridges. Also, it prints really cool without top…
When I was changing board on my Anet E16 I have decided to replace LCD screen to.with Bigtreetech mini 12864. Well it is not a direct fit so adapter was needed. So I draw something. Used screws were 5x M3x6, 2x M3x12. Longer bolts are for…
I like Yosuke's Black PSU replacement brace for Prusa i3 mk3s , but i wanted to use it with lower Squash ball feet by MKoe12 (these are amazing, mountable without frame disassembly and the printer sits as low as on the original gray…
This is a modified CoreXY setup I have been working on, I have to do the corner bearing holder and the motor mount yet, this is for a printer I am creating, it uses LME12UU bearings and 12mm shafts, I went bigger as this is also used in a…
I needed better board for my modified Anet E16 and my choice was BTT SKR 1.4. I haven found existing solutions for this board so I have designed mine. I was able to mount SKR board in a place where USB port is accessible. It is bit deeper…
My girlfriend broke a cap, which was holding seat lifting lever in place. To this day I wonder how she managed to do that. When I finally got my 3D printer, I decided to make this part, to stop losing this lever every time I used it.…
I rearranged a lightbulb connection I had from an old lamp and created a stand which has a hole for the exit cable and a set of 3 slots for 10x3mm magnets. In the slicing process, insert a pause on the layer before the cover of the…
Yo la imprimo en PETG. LME12UU diametro externo de este rodamiento es 22 mm, hay que tener en cuenta que le LM12UU, tiene un diametro externo de 21mm
Update 3/11/19 4:56pm EST The correct STL files re-uploaded Original https://www.thingiverse.com/thing:1688024 The Base was inspired by a cast iron black pipe flange The Insert allows the installation of a US E12 Socket. I printed the…
True to the name, Rapidevolution, here is v2, right on the heels of the original. The Re120 v2 improves on the previous version with a more aerodynamic beam design for the arms that is also noticibly stiffer, resulting in reduced frame…
The Re-120 is a printable, 3", 1S Toothpick frame, focused on lightweight performance, and "take what you can get" durability. With a clean build, it should fly nicely on Betaflight defaults. Fine tune for increased performance. These…
Had some boxes from KeyUnity lying around, so I designed an insert to store three LP-E12 batteries and SD cards for my camera in it
EDIT: Version 3.1 has replaced the original. This is a better design with 2 points for the zip ties which stop it from wiggling. This is an add-on for the Anet E12 to support the heat bed cable. It removes the stress of the cable moving…
Remix from the CNCKitchen Anet E10 beltholder for the Tehnologika.net E12 hotbed carriage. Lowered the height since the tehnologika.net part is one piece. The tehnologika part in question:…
One of the corners broke, and this simple model does the job pretty well. I've printed it with 50% Infill with Prusa PETG (Orange). I wouldn't put too much pressure on it, but for regular fridge use, I think it's fine. You can use the…
Everybody knows the iPhones cameras break easily. Even the sturdy additional camera protection will break. This got too expensive so I created this small, easy and fast printed protection (for the protection). It's supposed to fit under…
A simple holder for a Fenix E12 V2.0 to illuminate camera shots during printing. if you want to attach like me 2 lamps right and left you can simply mirror the holder in cura. a second holder for 90 degrees which is then attached in the…
Description A model to replace the outer casing of the Panasonic RP-HJE125E earphones to allow for sleeping on the side with them on. It's not perfect and therefore not final. I'd like to eventually make it smaller still. This mod, of…
After years of wearing a Casio watch I've developed an allergy to the stainless steel caseback (Nickel) so I made this cover. The frame fits on over the stock caseback and holds a piece of adhesive vinyl (car wrap) to cover the back of…
This custom-designed wall mount/holder is made for the Canon LC-E12E battery charger. It helps you keep your workspace tidy by securely attaching the charger to any wall or vertical surface, saving valuable desk or floor space. The model…
I recently bought a ugee UE12 drawing tablet. The pen is a bit thin and inconvenient. So I added a pen cover and pen holder to her
It holds the pen in both the vertical and horizontal positions with 20 nibs and the extractor. I also cut out a space for the 10x1mm magnet, but it works fine without it. For stability, the bottom part is better printed with 100% infill.
this is the latest IPhone cover i have designed , the special thing about it is the satisfying buttons to click and the kick stand attached to the camera lens cover. you need to cut any filament and insert it in the kickstand holes and…
First Ksuszka did a great job with his Bosch 12V flashlight. (Thank you) I needed an adapter to use the Bosch GBA battery with my ts100 soldering iron I changed the flashlight to use only the part I needed. I only needed the piece with…
just print it in PLA, PETG or ASA, it is a easy printable model without special. Have fun! You can use 2 screws M3 HEX to fix the plug inside. The Heads of the screw are unvisible.
⚡ 3D Printable USB Charger Casing for Nissan Note E12 This snap-on casing is designed to hold a dual USB charger (2× USB-A or USB-A + USB-C) for the Nissan Note E12. You’ll need: 🔌 A dual USB charger module ( Aliexpress ) 🔩 10mm/12mm M3…
This is a BMW 5 Series (E12) scale car model stl and 3d printable 3d model for display and diorama use. Great for automotive collectors, model builders, and tabletop scene setups, it lets you add a classic european sedan look to your…
Stand for 128x64 Powertip PE12864-004 displays I salvaged from old Hypercom Optimum T2100 POS Terminals and adapter to mount NodeMCU on backside on display. Code-Example: https://github.com/morlac/ProgrammingExcusesDisplay Print Settings…
We have a couple of ceiling fans with candelabra (E12) sockets, and I've had difficulty finding LEDs in that size that put out enough light, so I made this adapter so that I could fit two bulbs in the same space. In addition to the…
A robust, 2-piece clamp-on clip designed to replace broken parcel shelf string hooks in Toyota Corolla E12 hatchback (and compatible models). It spreads the load over a wide area and locks without threads using a tapered pin. Assembly: 1.…
v3 Category: DIY
I redesigned Snafky's cover a bit which seemed too tight and split the side to make it flex on a bit. That's all. UPDATE: Added another version (w/logo) that better fits the Canon branded batteries as the first one better fits the…
I redesigned Snafky's cover a bit which seemed too tight and split the side to make it flex on a bit. That's all. UPDATE: Added another version (w/logo) that better fits the Canon branded batteries as the first one better fits the…
The Re-120 Lite is a printable, 3", 1S Toothpick frame, focused on lightweight performance, and "take what you can get" durability. With a clean build, it should fly nicely on Betaflight defaults. Fine tune for increased performance.…
Podložka, váleček, rozpěrka, kroužek, těsnění... pod velký chladič FERA HE1224. Tisknuto z PETG, ale lepší je zvolit nějakou středně tvrdou gumu.
I have a bunch of edison style E12 base bulbs that I need to store. E14 bases are too large, so I rescaled the model and reworked from an individual base. These bulb holders provide secure enough grip that you can hang the whole group…
I needed a cover for my M50 batteries to ensure that the poles weren't exposed when in my camera bags. The covers I found were too loose, so I designed my own in OpenSCAD.
I have an iPhone 12 for work and liked the case. So I built a dock that fits the case perfectly. Tested with the original iPhone cable (Lightning to USB-A (not USB-C!)). The photos show the Lightning to USB-C adapter, which doesn't work…
I bought a USB volume control knob off AliExpress , and while it works very well, the casing was made from laser cut acrylic and not really what I want. I wanted to mount it in my car to use with an Android Auto head unit, so I also…
Canon LP-E12 Battery Holder for IKEA Skadis. !Print with the name upside down! 26.05.26 Update: New design, less material, shorter print time.
This is a simple mount to attach your Casio AE1200 watch to a motorcycle or bicycle handlebar. All you need is a pair of zip ties. The model consists of two parts, but a single-piece version is also available—everything was designed for…
Bring the iconic strategy and tension of Survivor to your tabletop with this 3D-printed double-sided dolphin puzzle. Inspired the puzzle in season 46, episode 12, this design features a vibrant dolphin leaping out of swirling ocean waves.…
This light guide is designed to fit the Acteon Newtron LED Scaler Handpiece and is a replacement for the original (part E12903). The first picture shows the scaler with the replacement part inserted, and the second shows an original to…
3d print ready, no support needed. I divided the big part into two parts so that it could be printed on my Ender 3
I couldn't find this anywhere, so I made one with the help of Perplexing lab's Gridfinity model generator. Bulbs screw into the base so there is nothing to rattle and no need for a 'bulb separator'. I couldn't believe that this hasn't…
This layout was designed to hold 1 of the B11 style candelabra bulbs in each gridfinity square. The spacing is very similar to the small boxes that I receive when purchasing the bulbs. Now you can screw each new bulb into its own socket…
LP-E12 ROUND CONTAINER
Adapter for E12 Fuse box to fit late E24/E28 Relays. Not sure if there are some other versions, but this fits the Motronic 1.3 Relays and 1979 E24 Fuse Box.
Yo la imprimo en PETG. LME12UU diametro externo de este rodamiento es 22 mm, hay que tener en cuenta que le LM12UU, tiene un diametro externo de 21mm
I bought a USB volume control knob off AliExpress , and while it works very well, the casing was made from laser cut acrylic and not really what I want. I wanted to mount it in my car to use with an Android Auto head unit, so I also…
На работе возникла идея смоделировать некоторое крепление для Микротика в служебную машину. Главное - оно не должно дребезжать и не должно бесить водителя =) За 16 часов получилось что-то построить, и около 10 часов заняла вся печать.…
Had some boxes from KeyUnity lying around, so I designed an insert to store three LP-E12 batteries and SD cards for my camera in it
