Liczymy pasujące modele…
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress: https://s.click.aliexpress.com/e/_c37Z1MCx The housing is designed to take up the least amount of space. It is designed to work with…
An Encoder knob for the EC11 D shaft & Plum shaft. Has a slight radius on the top, and vertical knurling on the sides. Designed for 15mm D shaft and 15mm Plum shaft, however will work with 20mm shaft also. Height = 15.5mm Diameter =…
Simple housing case with Snap-fit for KY-040 or similar Rotary Encoder. It has a hole in a cover for easy mounting under a desk or anywhere else with a screw. Easy access to the 5-pin DuPont connector. KY-040 Rotary Encoder Module Spacing…
Edit 22/27/07: Added updated files. Remade the design to be a little nicer on several different layer heights. Also added a “snug” variation of both versions that has a 6.1mm hole vs the 6.2mm default hole. Simple knob for an EC11 style…
This is a smaller version of Dual Rotary Encoder from FlightSimMaker. EC11 15mm round shaft. Update 2021-12-11: Added CRS Knob Added new Knobs with more details (V2) Added new Case with mounts (V2) Print Settings Printer Brand: Prusa…
For a project of mine I designed couple of encoder knobs for EC11 rotary encoders , here are the specifications; For 20mm EC11 shaft lenght I made 13mm shaft slot Shaft/Post diameter is 3mm Knob diameter is 19mm Knob height is 20mm There…
Another simple patterned knob for EC11 knurled-style encoders. Little bit thick for direct fit onto some control panels, but with a bit of a spacer would be fine, or with z scaling down.
The ESP32-S3 is just hot glued to the tft for now. Printed in ABS. but can be printed in whatever you want. You can crazyglue the top button trim but I found that just the bolt from the encoder is enough to hold everything in place. If…
Initially I tried criss-crossing patterns but it doesn't grip well, so I made vertical ones. Heights n stuffs should be easily adjustable with CAD softwares.
Minimum height for a 15mm shaft EC11 encoder, small enough to fit in choc-spaced keybaords. Conceals layer lines with shape. No support necessary. Built in OnShape
just a Knob for Rotary Encoder EC11 with Flatted Shaft leave a like and make thank you :)
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This set is designed for breadboard-based prototyping with Arduino and ESP32…
Covers and knobs for EC11. Knobs are compatible with half shafts.
It pairs nicely with the breadboard mount https://www.printables.com/model/1574339-breadboard-mount-for-13-oled-display-with-ec11-enc
There is 2 design one for the CTS 288 encoder with a 0.250-inch shaft and one for PEC11H encoder with a 6mm shaft . I've created two models: A 2-part version for single-color printers , which includes the knob and a cap to be glued into…
Live your best dorito life, from the keyboard to the printer. Dshaft and knurled shaft versions, intentionally a smidge loose for easy fitment. Should print fine at most settings, only needs enough perimeters/infill to make the surfaces…
Looking for a quick and easy way to customize your EC11 Alps encoder knob? Check out these Encoder Knob Model designs, now available on Printables! These designs allow you to create your own unique encoder knob, whether you want to add a…
On split keyboards with MX key switches and rotary encoders, the knobs can often be lower than is comfortable. This print adds 13mm of height to the rotary encoder. (Only works with D-shaft encoder, not the star shaped shaft). The side…
This remix is smaller than the original in order to be placed easily in the hole. The insert's nut is also removed to be able to screw the rotary after mounting it. Category: DIY
A large 45 mm rotary encoder knob designed for EC11 encoders with a standard 6 mm D-shaped shaft. The press-fit socket was tested on a real EC11 encoder and provides a tight, play-free fit without screws or glue. The oversized diameter…
Modification of the Knobby enclosure to use the widely available EC11 rotary encoder with 20mm knurled shaft, e.g. https://www.tinytronics.nl/shop/en/switches/manual-switches/rotary-encoders/rotary-encoder-ec11-20mm. Only the body and the…
Case for 1.3 OLED with EC11 encoder
Gear cover for evolve with ABEC11 107mm wheels. No supports required when placing face down on print bed, screw hole is a thin bridge so you can punch a hole through it. Ribbed edge to allow standing upright and not slide when on carpet.
Wall mount to hang evolve with ABEC11 107mm wheels.
V2 of the evolve wall mount to hang evolve with ABEC11 107mm wheels.
Eovan Carbon Pro - gear guard extended for ABEC11 107mm wheels NOTE:: Use the slicer to flip/mirror for the other side.
Adds height to rotary encoder knobs on keyboards. Built specifically for these ‘acorn’ shaped guitar knobs . I included the Fusion 360 file if you'd like to adapt to other knobs. The print orientation isn't ideal for strength, so I'd…
If you ever installed knobs with a screw on a D-Shaft encoder, you probably noticed that as such, the knob is not exactly centred on your encoder. Here is the fix for that issue, with this model you never have an uncentered knob again. If…
Wall mount to hang evolve with ABEC11 107mm wheels.
Wall mount to hang evolve with ABEC11 107mm wheels.
I bought a USB volume control knob off AliExpress , and while it works very well, the casing was made from laser cut acrylic and not really what I want. I wanted to mount it in my car to use with an Android Auto head unit, so I also…
I designed this model for a macro pad project I worked on. It's designed for 6 mm D-shaft rotary encoders and has been tested with the Bourns PEC11R-4215F-S0024. It provides a nice friction fit while still being easy to remove.…
.............................
This is a simple cover for the EC11 rotary encoder commonly found on mechanical keyboards. This part specifically works well for builds where the encoder sits within the top plate, but it will probably work well without a top plate too. I…
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress: https://s.click.aliexpress.com/e/_c37Z1MCx The housing is designed to take up the least amount of space. It is designed to work with…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This set is designed for breadboard-based prototyping with Arduino and ESP32…
I bought a USB volume control knob off AliExpress , and while it works very well, the casing was made from laser cut acrylic and not really what I want. I wanted to mount it in my car to use with an Android Auto head unit, so I also…
