9803 modeli
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this T switch Track stands on your own table in AR, at…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…
Wydruk około 4,43 €–5,41 € nettoWstępna wycena jednego wariantu
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.
Wydruk około 3,60 €–4,39 € nettoWstępna wycena jednego wariantu
There are already a number of hand-powered helicopters entered in the Make It Fly contest (like this , and this , and this , and this and this ), so why add another? Well, I was intrigued by these new toroidal rotors (all the cool kids…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
This is a model of a detailed chess King. I have also models for the other Chess Pieces and Pawns
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a model of a detailed chess Queen. I have also models for the other Chess Pieces and Pawns
Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small tractor with freely rotating wheels printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly calibrated (to prevent…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
This is a model of a detailed chess Rook. I have also models for the other Chess Pieces and Pawns
Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
One Piece is my favorite anime, so I made this 2D plate of Luffy that I'll be using to make a collage of my favorite characters as a wall piece! Be sure to include a color switch for the effect below, or download the .gcode file as that…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
Idea I needed a new lens cap for my lens and tried to challenge myself to desing a one piece one that has built in springs. This is the result of that. Printing The print is fairly self explanatory, just print it with the logo side down…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a model of a detailed chess Knight. I have also models for the other Chess Pieces and Pawns
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
This is a model of a detailed chess Bishop. I have also models for the other Chess Pieces and Pawns
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[ENG] Tatra 813 is a Czechoslovak special heavy off-road truck, produced between 1967 and 1982. The basic representative of this type series was primarily the military version 8×8 KOLOS, which was capable of pulling trailers up to a total…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
xenomorphic Chess Piece Set. Added STL and OBJ versions on 12/1/2024
Wydruk około 18,53 €–22,64 € nettoWstępna wycena jednego wariantu
Floor has a slight crown to prevent pooling of liquid. Prints without supports. Hexagons are the bestigons. Update: It's been raining for a hour and the inside is BONE DRY.
Wydruk około 8,81 €–10,77 € nettoWstępna wycena jednego wariantu
I designed this nozzle for the vacuum cleaner to be able to reach the really tightest areas of my car. Internal diameter: 34.8mm Available in three lengths
Wydruk około 2,23 €–2,73 € nettoWstępna wycena jednego wariantu
🔥 Inspired by ATLA, a wearable prop that is easy to print! 🎎🏮 I am a fan of Avatar: The Last Airbender, and many years ago I published the simple crown from the animated series. Since the recent Netflix live action show, I decided to…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
I made this 3D logo from a picture using 3D Builder
Wydruk około 3,35 €–4,09 € nettoWstępna wycena jednego wariantu
Heads-up, people are going to want to touch it and ask questions. 200mm x 200mm with 16 zones. 3mf file included so you can rearrange/tune your infills!
Wydruk około 7,23 €–8,83 € nettoWstępna wycena jednego wariantu
18V Makita Battery Adapter: See my design here https://www.printables.com/model/436132/ 18V Bosch Professional Battery Adapter: See my design here https://www.printables.com/model/427974/ 1x Power Switch: Switch size 21 x 15mm Front…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
Wydruk około 1,93 €–2,35 € nettoWstępna wycena jednego wariantu
Angles for OSB or MDF panels with a thickness of 18 mm. Color the corners of your furniture.
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
I needed a 45°/135° angled IKEA Vidga corner piece but IKEA only sells 90°. So I created an OpenSCAD model where you can set any angle you want. Adjust angle and radius in OpenSCAD file Printable with minimal supports. Use brim
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I built a bunch of modular audio gear boxes for rackmount equipment. I designed these feet and "feet receivers" to be installed on the boxes so they would stack securely. You'll find the files for the feet, receivers for the top of your…
Wydruk około 13,59 €–16,60 € nettoWstępna wycena jednego wariantu
I took a manga panel I found of Sanji and made it into a 2D art piece. Use the attached gcode file for easy printing with a color switch. Feel free to scale the print larger, but you'll lose details if it goes any smaller. Please post…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
This is the jollyroger from Burger King X One Piece collaboration. NO MMU NEEDED I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,36 €–0,45 € nettoWstępna wycena jednego wariantu
Yet another incredible SCI FY terrain piece! A basic energy unit supplying power for untold generations within the bowels of the megalopolis city-states. All while creating a toxic choking atmosphere of the incredible dirty industries…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt. Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is my first time playing around with 3D printing. Did I go a little overboard? Yes. But consider that before I had a project to go overboard on, my 3D printer (which was gifted to me) spent at least a year sitting in its box,…
Wydruk około 4,87 €–5,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
OnePiece themed key holder
Wydruk około 5,98 €–7,31 € nettoWstępna wycena jednego wariantu
If you enjoy this project please ‘like’ it here on Printables. It really helps me out. Thank you. I'll show you step by step how to create these amazing stained glass like marvels with the help of your 3D Printer and some free design…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
In my two new floor level showers no strainers were installed in the drain gutters, so long hairs etc. periodically clogging the drain. The cleaning of the drain ist really no fun... The official strainer (google "Tece Haarsieb Drainline…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Angles for OSB or MDF panels with a thickness of 18 mm. Fit 3 sides. Color the corners of your furniture.
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Left and Right end parts to add that extra flare to the rear spoiler, remember all files are separate downloads. Thickness is 1/8" or 3.175mm More Models are coming, already have at least four more models just revising hole sizes as I…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Does your child's ride need an upgrade? Do they drive their favorite power wheels all around the neighborhood, but don't have room for all their tag-along toys? Look no further than this awesome tow hitch receiver system (and adapter…
Wydruk około 11,26 €–13,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DJI RC-N1 mount adapter with QuadLock receiver. Use four M4x5 screws and M4x3 nuts to mount the two together. Print with PET-G, 0.2mm layer, 0.4mm nozzle, 50% infill. Use supports for the QuadLock receiver part - print it flat on the bed.…
Wydruk około 3,74 €–4,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print from PETG, ABS or other heat resistant material. For this piece use clear see through filament because of the LED. Original switch part number: 61318365300.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Details removed
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
Jedná se o zremixovanou trysku z modelu Pool Waterfall, kdy jsem složil trysku do jednoho kusu, bez mezimatice. Není potřeba těsnění mezi trysku a trubku. Tisknout lze z jednoho kusu, ale použil jsem límec (brim)
Wydruk około 5,86 €–7,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print instructions: PLA with 0.6mm (or 0.4mm) nozzle at 0.2mm layer height 2 perimeters Body and head: No supports for the snake body (make sure the flat side is on the print bed) Support for the end-links are already included in the…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Just another remix, as one piece and with color change for the bust. Gcode is printed with 15% infill (support cubic), with support and with color change for the bust. #standwithukraine
Wydruk około 8,44 €–10,32 € nettoWstępna wycena jednego wariantu
I love the original “ All in base game box ”, but either the box and faction sizes changed or it's a different version for the international market because unfortunately, a few of designs including the faction boxes didn't work. These…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This is small pieces that enables to stack carton boxes stable. Like Prusament, some carton boxes are nicely designed and I thought too good to just throw it into recycling container. I made 2 versions (High and Low). High version makes…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
The little piece that make move the Rear Shelf of a Mitsubishi Colt car. Not as good as the original one but do the job. Printed without supports but with a brim.
Wydruk około 0,54 €–0,65 € nettoWstępna wycena jednego wariantu
This is one single piece. once printed, just remove the supportmaterial and with a little force open it the first time. From there on the durable spring mechanism will keep your glasses save. open the case with a push on the front. once…
Wydruk około 8,81 €–10,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1.- Introduction: In the 80s I was exposed to this puzzle formed out of wood, that with the years it got broken. (wood that got deteriorated and a friend that tried to solve it broke two of the pieces of it) Today you can find this wooden…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
A tool rack to hold the Wiha 26491 5-Piece Ball Metric End Hex Driver Set. Meant to be affixed to the front of a 19mm or 3/4" shelf with 2 drywall screws. Print instructions .2mm layer height, 20% infill, PETG or whatever should be fine.…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Would be a great addition to your desk! Enjoy!
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Fits the Spektrum AR631 Receiver, and possibly others. The mount should be printed small-side down, so that the lip that keeps the narrow side of the RX (the side with the antenna) from sliding through faces the bed. Supports are not…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the track interface piece that goes with the Brio Lift and Load Warehouse. We lost this piece and the tower doesn't work without it, so I bought another whole set to model the piece. Brio does not offer a replacement part service.…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why use two when one will do? King your Checkers pieces on your own. A print-in-place design, no supports required. 32mm diameter x 8 mm height (1-¼" x ⅓"). Uses approximately 5g of filament per piece. I printed with a brim, because the…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
This is an adapter, to use a pole with cone threaded connector (as e.g. the Vileda ones) with the M24 connection mops, commonly used in Greece. It is a combination of the “ Vileda Mop rod, Coned Thread Connector” designed by Skaran (…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Некоторые детали следует довести до необходимой точности напильником. Некоторые детали необходимо довести до точности с помощью файла.
Wydruk około 3,26 €–3,98 € nettoWstępna wycena jednego wariantu
A holder in the same fashion as the 4 piece, but for a full seven! Holds: 10", 6", 3", 1.5", universal, 3/8" to ½", 3/8" to ¼"
Wydruk około 6,20 €–7,58 € nettoWstępna wycena jednego wariantu
Tiskací písmena české abecedy s diakritiými znaménky, která jsou pevně spojená s písmeny. Tisk je dvoubarevný. Do výšky 1,4 mm tisknuto průhledným filamentem (nebo bílou barvou), dále barevně tak, aby v konečném vzhledu vyniklo celé…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Hex terrainpiece 33mm (side to side) and 20mm high. Takes 6 magnets sized 10mmx1mm for magnetic connections. Place magnets with North in the same direction (making 3 sides north and three sides south) or alternate north and south on all…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
The same velux piece but with a hole so you don't have to drill it yourself.
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
Modified to work with the picture hanging Velcro Command strips. *Warning don't use with non-Velcro strips
Wydruk około 0,63 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Abecedu jsem doplnila o psací písmena s diakritikou. Háčky, čárky a tečky jsou k písmenu připojeny tenkým proužkem. Tiskla jsem dvoubarevně - spodní vrstva z průhledného plastu (lze použít i bílou nebo jinou méně výraznou barvu), dále…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu
Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
These two flower pots were made for each other. You can print the pots themselves, or you can print the molds. If you print the molds, use a flexible material or a material you can make pliable enough to pull out the casted pot. I casted…
Wydruk około 11,99 €–14,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modelo creado para una empresa de fotografía como detalle al entregar las sesiones navideñas junto con una placa con logo, Perfecto para decorar el árbol de navidad. Impreso en MK4S con MMU3 utilizando una boquilla 0,4 ( con 0,25 queda…
Wydruk około 4,60 €–5,62 € nettoWstępna wycena jednego wariantu
Hockey Trainer Bridge One Piece to print on larger print bed One piece remix of Steven Quinn's Hockey Trainer Bridge
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified eye piece for ByteSlinger's Portal Turret Pumpkin.
Wydruk około 1,95 €–2,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tool holder for Wera Kraftform Kompakt VDE 817 with 14 bits (05003474001 / 05006607001) This seems to be the product on Wera website (mine was from amazon [05003474001] without the nice colors 😥)…
Wydruk około 4,54 €–5,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I kept damaging my Ethernet cable by bumping it with a nearby storage basket, so I wanted to find a wall plate that would recess the jack out of the way. None of the ones I found nearby fit Decora style wall plates, so I designed my own.…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
Destička pro zápis morseovy abecedy. Board for writing Morse alphabet.
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
Self-Storing Martian Chess Set. This is my version of a Martian Chess board. It all fits on a MINI+ 180mm build plate with a 0.4mm nozzle. The set is self-storing, with enough pieces for a four-player game fitting inside the box, magnets…
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
The dark armies gathered near the battlefield. Banners raised, horns blasting they clashed with the mighty white troops. The battle raged for hours and many heroes fell. One of the dark bishops never returned.
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement part (P50 SPREADER CLAW (P750)) for a Cartoni Smart Lock mid-level tripod spreader (S731/SL). Intended for when one of the “claw” bits on the original breaks, and you only need the main part replaced. ADDITIONAL PARTS NEEDED :…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Catan pieces holder for use by each player in the game. Holds the 24 piece set used in the basic 3-6 player settler version of the game. Sized to be smaller than a Catan resource card, so that you can store them inside the…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I saw a puzzle like this a very long time ago, and have recreated it here (but with a unique look). Easy to print! The pieces are very loose within the frame. you need to position the piece's so that they interlock, and the puzzle can be…
Wydruk około 1,30 €–1,58 € nettoWstępna wycena jednego wariantu
Chopstick Buddies are attachments to a plain chopstick. They are designed for beginners, and for a sizable population who cannot hold unaided the thumb pose required by the traditional, standard chopstick grip. See Chopstick Buddies on…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
February is a trick-taking game designed by Chris Wray . February is a unique trick-taking game where new rules are published every year during the month of February. The game and rules for February can be found here . This is a 3d print…
Wydruk około 2,35 €–2,88 € nettoWstępna wycena jednego wariantu
All my designs are going to try to take advantage of and recycle the Prusament filament spool holders. This time it is a dining table centerpiece, with the colors and shapes of Prusa, hexagons and circles. The Center is 4 basic pieces:…
Wydruk około 4,83 €–5,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
One Piece Themed key chain with hearts pirate logo and log pose on each side respectively.
Wydruk około 4,00 €–4,89 € nettoWstępna wycena jednego wariantu
This print will hold the three eyepieces that come with the OneSky telescope. Try printing it in glow-in-the-dark! The holes in the hinges have been sized to fit a short piece of filament, so are no additional parts needed to complete the…
Wydruk około 12,51 €–15,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tool holder for Wera Kraftform Kompakt 62 with 33 pieces. https://products.wera.de/en/kraftform_kompakt_kraftform_kompakt_without_ratchet_functionality_kraftform_kompakt_60_62_kk_62.html.html (No. 05059297001) This version is for…
Wydruk około 4,64 €–5,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Meet "Bit-Buster Mario," the ultimate retro-futuristic hacker from the neon-drenched streets of Neo-Mushroom City! He's a digital daredevil with a heart of gold (and a serious mustache). Appearance: Helmet: A gleaming red and metallic…
Wydruk około 4,92 €–6,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
parts for the mmu enclousure printed in one piece gcode with input shaper and prusament petg
Wydruk około 7,10 €–8,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gymtastic Tray to store all heads for fast access. The piece that should be in the box from beginning! No support needed. I printed it with 0.6 nozzle because of the speed. Also can hold the cable.
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
The part replaced clamps down on the tower shaft of the monitor, the threads printed in their usual orientation would break from the force, so instead they're printed separately in a stronger orientation then slide into the base. Printed…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original end pieces of my stainless steel newspaper tube were lost, so I designed a colorful replacement version... Printed with Material: Prusament Mango Yellow PETG Nozzle: 0.4 mm Layer height: 0.2mm Bed: Satin Powder-Coated Sheet…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This part usually comes with the purchased product. But it wears out over time. So I remade this piece based on my need. I wanted to share it because I thought it would be useful to you.I Also share the photo of the original piece.. Stay…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
The FAO Schwartz Laser Tag electronic game includes a “vest” containing the receiver which signals a hit from the opponent's laser gun. The vest includes straps which connect the receiver via 4 brackets. The brackets often fail as the…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
I created this numbering caps that clip on to langos acryllic markers. There's a total of 1000 caps. I Printed them using the following setup to print multicolor prints on my core one without an MMU or AMS system. Prints in PLA without…
Wydruk około 5,12 €–6,26 € nettoWstępna wycena jednego wariantu
Intermediate piece for karcher WD 4 Premium and Bosch PMF 180 E. It wil mayby also work with a different vacuum cleaner or multi tool. The smooth one is les stong than the one with edges.
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
I printed the Small Parts Cabinet and top tray, and wanted to place my movement holder securely on top.
Wydruk około 2,43 €–2,98 € nettoWstępna wycena jednego wariantu
Some jolly rogers from the one piece show
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This is a replacement part for the attachment of the stainless steel wisk head for the Arendo Milk Frother 'Mini Milk Star'. The original attachment is of weak design and after 1-2 years of every-day use, it breaks. I replaced it already…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
The ZUMO robot comes from POLOLU. https://www.pololu.com/category/129/zumo-robots-and-accessories This is the Arduino UNO version. In order to control it by RC, I made this stand fixed with nylon standofs on the UNO. The RC receiver is…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
With PrusaSlicer slice the model with a layer height of 0.2mm. Add a pause command at layer 63 (12.6mm layer height). Don't be confused: The pause command takes effect at the beginning of the layer, the slicer shows previews of the…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 58.38x169mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.08mm and the Actual…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Drilled a hole in the ceiling to mount a GU10 recessed light only to figure out there is no power? Meet myself.... Facing the same issue? Print this cover plate that fits nicely in any GU10 mount to make it look less jank. Printed with…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Had some old coax receptacles in out house, all with different size holes in the wall behind them. I wanted to cover them up, and plug the whole to lower air leakage. Made an adjustable Fusion 360 model because I had a few different size…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 97.97x174mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
The Compliant Mechanisms Research Lab has worked with Mark Rober and his team to create the world's smallest functional Nerf blaster. Watch his video here ! EDIT 10/16/2023: The ¼-scale files have been updated to a version that latches…
Elephant is 14 cm long, 10 cm high, and 6 cm wide. Designed to Print with PLA Z=0,2 Suggest to set Bottom layers to 10 Some of them need a brim. See the picture. (I placed them on the left side.) It should look like: Set selective brim…
![Self-Kingable Checkers Piece [print-in-place]](https://media.printables.com/media/prints/181448/images/1695486_086359e8-77c4-4ebd-9886-148aa438699c/checkers0.jpg)
