12 376 modeli
Just took delivery of my new Steamdeck and decided to design a storage tray to easily store your USB-C charger and MicroSD cards in the cavity on the bottom of the official Steamdeck carrying case that comes with the Steamdeck. The design…
Made this stencil to create a checklist on a post-it (or sticky) note pad. The stencil surrounds the notepad to prevent it from sliding around, and can also be used as a base to go underneath for safe keeping.
Description While I was lucky and received my Steam Deck quite early, there was one major problem: I wanted to play the Deck in tabletop mode like a Nintendo Switch. Because of this I created a detachable stand that allows my friends and…
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
I liked the remix from ANBAL534 ( https://www.printables.com/model/207028-steam-deck-carrying-case-insert-for-eu-plugs-europ) but missed the option to use the case as a stand as well. Besides that I don't use full SD cards, I opted in…
I made a small stand for my Steam Deck, as the available ones are way too big for my taste (and printer).
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Update There is a bigger version of this box with adjusted tolerances now! (As many comments suggested) You will get the more spacious version if you print every stl with a "+". I'd recommend printing the + version if you intend to double…
After seeing Neebick's genius addition of a stand into JordanK's Steamdeck USB-C Charger Cradle, I went about reimplementing my slightly larger tweak to that version. Once again, it is about 3mm taller to make it easier to get all of the…
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 35mm x 27mm 6mm Keyring hole
I was quite surprised that I did not find any frontplate for the Elgato Stream Deck MK.2 so I had to try to make one on my own. Actually this is the first prototype (printed at 0.30 mm) and so it's far away from being perfect. But it fits…
2026 Update: It looks like since the original launch of the Steam Deck some chargers might come with different length of cable now. My original release charger has 1.5m of cable and it is already a tough fit even when rolled up tightly.…
The first Foldable kickstand for Steam Deck work in progress EDIT: Now with second version for steeper angle! (deutsche Beschreibung weiter unten) This is an easy-to-print foldable stand for the Steam Deck. The print is optimised for…
I designed a replacement peg for my BLACK and DECKER Workmate portable workbench. The original part works just fine, however, I needed a few more as several have gone missing over the years. I tried to remain true to the original design…
Kudos to Robert Schiele for the brilliant idea to design a lid for the Miele PowerDisk ! My first PETG prints in 100 and 100.5% scaling were unfortunately not a success. They were too tight and did not fit. Update 04/23/23: Then I scaled…
Unser Quark ist immer alt geworden, da es keinen richtigen Deckel gibt. Ich habe einen simplen slide-on Deckel entworfen. Sollte dieser nicht passen, schau mal hier vorbei (Neuere Version):…
Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…
I have constructed a box here that can be changed via parameter input. You can download the file and change it via Fusion 360 or similar via the parameters. Make your own boxes sizes as you need them as in the picture above. Ich habe hier…
This is one of my first tries at 3D models. The jewelry stand is somewhat minimalist and reminds me of a castle. This jewelry stand for necklaces was printed on the prusa mini which limited the dimensions to 178 mm in height and width.…
Hier eine Tischklammer bzw. Halter für Tischdecken, die hoffentlich länger halten als die gekauften, welche nach dem 2. Mal anbringen schon zerbrechen. Gedruckt mit PLA+; das ist einerseits relativ elastisch und andererseits ziemlich zäh.
I lost the litte handle cover, so i made my own. Should also fit on the TM6.
If you have a passion for collecting cards, you know what this box is good for. Space for about 900 cards, 150 per tray (70mm x 75mm) and a lot of tokens can also be stored.
This is a simple deck holder for your playing cards. There are several sizes included: Poker sized (63.5mm x 88.9mm / 2.5" x 3.5"), single deck Poker sized (63.5mm x 88.9mm / 2.5" x 3.5") double deck Bridge sized (57mm x 88.8mm / 2.25" x…
I maked a simple cake topper for german people. Ich habe ein einfach Kuchendeckel für Deutsch Leute gemacht. Material: PLA Enjoy.
Simple yet very effective display stand for tech decks. Makes a great present. If you plan to hang it on the wall I recommend using 3m command strips. If you plan to stand it up I recommend adding a stop to the print script right before…
Eine einfache kleine Aufbewahrungsbox mit Deckel aus PLA. Ist fast ident wie meine Feuchttücher Box, nur der Deckel hat mehr Spiel und für das Gelenk habe ich 2x Schrauben M3x12 mit 4x Beilagscheiben und 2x Sicherungsmutter vorgesehen. A…
ENGLISH (deutsche Beschreibung weiter unten) A set consisting of three popular board games in a compact case: Chess Checkers Nine-mens morris The beautiful chess pieces were modeled by Jacob G:…
Needed a hard case for playing cards that would protect cards from damage better than the cardboard box that cards are stored in. Prints with NO SUPPORT and the lid easily snaps on the box in PLA. Let me know if you try other materials.…
Just a simple Steamdeck stand. Behind fits a Anker 8in1 hub . Printed with Ender5 plus und it works just fine. No Support . Gcode ist for Ender5 with PLA and 0.20
Update: I have added a new version that has thinner walls. I made the inner walls angled to run parallel with the exterior walls. They are 3mm thick and should be plenty strong for normal usage. The cord sits inside much better without a…
UPDATE: New Card Stack uploaded (Update Card Stack closed) . Now little bit higher and closed walls on both sides. Updated Card Stack printed without support and much faster Finally i build a Card Tray that fits my needs. It holds up to…
Maße Box: 50mm x 80mm x 31mm x 2mm (Länge x Breite x Höhe x Stärke) Deckel: 50mm x 80mm x 2mm x 1mm (Länge x Breite x Höhe x Stärke) Box + Deckel: 50mm x 80mm x 32mm (Länge x Breite x Höhe) Weitere Ausführung: Box + Deckel: 50mm x 50mm x…
A calibration block for 3D printers. This has gaps from 0.05 up to 0.5mm with labels on each one. Test it with whatever your preferred print settings are.
Remix of the Hazard Triangle Holder for BMW I3 Trunk. https://www.thingiverse.com/thing:4671592 Things Changed: Optimized Screw Holes for longer Threads to fasten it Added a Hinge and a flap to secure the Hazard Triangle in the Holder…
This is a simple holder for your Wera Tool-Check. There is a version for screwing to your wall and one each for IKEA Skadis and Wall Control pegboards available. Prints well in the orientation as it comes from the STL file using PLA with…
Howling wolf head lowpoly woggle - Pasa pañuelo de lobo aullando para scouts cubscouts o lobatos
Do you have a dead SSD and an unshatterable ego? Then look no further, print this, superglue the two sides together, and attach it to your bag, purse, keys or anything you desire! Originally created cause I thought M.2 SSDs kinda looked…
Since I needed a liftarm with holes instead of crosses and in regular as well as half thickness, I constructed a 3x5 and 3x5x0.5 liftarm similar to the Lego - parts 99773, 65193, 2905. Print the liftarms in STL orientation with support on…
This Magic the Gathering Case is made to store sleeved cards. It holds a 60+5 cards deck. Some different styles of the Topcases are provided to enable multicolor prints that doesn´t need the usage of a MMU. It still contains a blank Top…
Print settings: Everything is printable at 0,2mm layer height and 15% infill. Supports aren't needed. I recommend printing this model with multiple colors. You can use my TitanicWreckage_part2_multicolor file for that. Assembly: Glue the…
Mein Anhänger steht immer draußen und der Stecker setzt sich mit der Zeit mit Dreck zu. Damit der Stecker immer schön sauber bleibt, habe ich diese Schutzkappe konstruiert. Die Version wurde etwas angepasst, damit die Dichtung vom Stecker…
Woggle Guides and Scouts from Chile neckerfhief or scarf ring. WAGGGS
Motivation When bulding a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that allows…
deckbox with toploader This box have capacity for: - 100 Double sleeved cards. - 1 Toploader (3" x 4") Slot.
As my first foray into complex 3D design, I created a custom deck box to house my “Gyome, Master Chef” Commander Deck for Magic: The Gathering. Modeled in Fusion 360, based on the Garland M43FTR restaurant-grade range. Features: Main oven…
This is a monster attack deck holder for Gloomhaven and/or Frosthaven. Main features of the deck holder: The holders are stackable to take less space The fusion 360 model file is included, if you do a remix, please post your modified…
Ich habe die Ferdern für 55 und 72mm Objektivdeckel entworfen. der Remix von Martin stellt eine Version für 49mm Objektivdeckel bereit I designed the springs for 55 and 72mm lens caps. Martin's remix provides a version for 49mm lens caps.
This cutlery tray now uses the whole height of the drawer and has more individual separation for small stuff you usually need in a kitchen. The larger models have “wings” to prevent warping. Just cut them off after printing. No support…
A remix of the low-poly fox ring with smaller ears. Modified to have a larger head and a slide ring more appropriate for the Ferocious Foxes Scout Patrol. (Original Source Here: https://www.thingiverse.com/thing:3059008 ) Print…
The bottle cap fits on ‘Kavodrink Tritan’ bottles. There are two versions: one without knurling and one with knurling. If you want to be extra safe that your print is food-safe: How to make food-grade 3D printed models - Prusa Printers
In the Barbie movie, Ken's Mojo Dojo Casa House appearance sports a horse emblazoned necklace with a horseshoe border. This model is an attempt to replicate the necklace. This model isn't 1:1 from the movie, but makes a pretty good prop!
Wargame Walls Wrecked Barrels Section 18 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
A simple heating pipe cover printed in PETG. Supports needed only for the bolts connecting the two parts (see included picture of print) Printed on Prusa Mini+ with standard profile 0.15mm. CAD file .f3d for Fusion360 included, parametric…
(English see below) Diesen einfache Eckverbinder kann man in Fusion 360 so anpassen, dass er zu unterschiedlichen Kabelkanälen passt. Dazu gibt man in Fusion 360 (Datei „ Kabelkanaleckparametrisch v2.f3d “) unter dem Menüpunkt "ändern"…
Ein einfacher Kartendeckhalter inkl. vertikalem Ablagestapel für klassische Sammelkartenspiele (wie bspw. Magic The Gathering, Pokémon oder Lorcana) im Quer- oder Längsformat. Der Halter ist für Kartendecks mit 60-70 Karten (Stapelhöhe…
General I really like the look of the official Steam dock so I tried to get it as close as possible to the original one. The dock used in this build is the 8 port uniAccessories dock. I like this one because it looks very clean, is small,…
This is a replacement for the cards tray that comes with the full version of the excellent board game The Witcher: Old World from Go On Board games. This game, when you buy it with all of its expansions, has A LOT of cards. The storage…
Welcome to the Nintendo Switch Holder for Rivian 2.0! This refresh is specifically designed to make printing easier while also making it look more aesthetically pleasing. Smoothing the edges, and widening the sides for a flat bottom. The…
Simple, beautiful butterfly pendant for which you don't need any supports. Printed in just 13 minutes! Use the color change for an optimal result.
A friend wanted to create this hilarious deckbox , but he couldn't find a food can with the required dimensions. So 3D printing saved the day! This deckbox is specifically designed to the dimensions of the label from the reddit post. It…
This Keychain is 45mm in Diameter and a 4mm Base with 0.7mm letters going in (4 layers). the hole is 6 mm. 100%infill for the best strength.
This model uses a torsion spring to pull the head and neck back into the body. It is extremely satisfying to play with, and the model (at 100% scale) works great! I haven't had time to play around with the scaling, but I wouldn't go too…
Systemprofil-Eckverbinder für Aluminuim-Systemprofile der Abmessung 20mm x 20mm. in das Loch in der Mitte des Alu-Profils (4,3mm) muss ein M5 Gewinde geschnitten werden. Die drei Alu-Profile werden mit M5x16 Senkkopfschrauben an dem…
corner and edge protector for float glass 6mm; can be used e.g. to securely store the float glass tabletop of the garden set during winter;
Check out this Scout woggle featuring Gray Brother, the wolf from the Jungle and Mowgli's best friend. Enjoy this cute wolf puppy caracter! It's the perfect choice for awarding to a Cub Scout named after a character from Rudyard Kipling's…
Power outlet cover to safe your kids from touching into the power outlet, easy to print, easy to place them into the power socket and also easily removable with a simple plug
EU Steckdosen cover/ EU plug cover by qubee baby protect
Adam Ijaz hates you. Dbrand made an adapter for the Steam Deck Dock but didn't make it for the--let's face it--far more common JSAUX dock most of us purchased before the official adapter came out. Thankfully, one of Dbrand's minions took…
This 50x50 filler cover fits on the Balconera Series (50 or 80). You get two files: the one with the hole and one without any hole. Please note: despite all Lechuza filler covers look the same on the Lechuza site, they have different…
These are the models for my Autohotkey Streamdeck with Unified Communicator Keycaps. It houses a raspberry pi pico, RGB Leds and 4 Cherry MX switches. See https://buildcomics.com/3d-printing/a-microsoft-teams-adventure/ for the…
This is a boardgame optimised for a prusa mini Print settings: Board: Standard settings 2 filament changes PLA Stones: Standard settings Grid of 3x3 stones PLA Happy playing! :)
Typ 2 Stecker Abdeckung Type2 charging cable cover
Adjusted the deck box and deck box lid to accommodate for double sleeves.
English: A flower bottle cap to protect your lemonade, beer or any other drink against curious insects. It is especially useful in the summer against insects crawling into the bottle. The cap effectively protects you from bee or wasp…
Cat lowpoly woggle - Pasa pañuelo de gato para scouts cubscouts o lobatos
Scout neckerchief slide for Troop 300. Designed for multi-material printing. Print instructions Designed with a flat front to the tube and 5mm pegs this design should hold up well to more fidgety scouts!
Checklist Stencil Circle & Square
These models are a remix of some of my models, somewhat smaller and elliptical in shape, which can be used as a keychain or necklace. They can be printed in a single color, with good results. If you print it in two colors and use a…
No supports needed. Default settings.
I did PLA decals for the Double-decks London bus made by Winslow instead of using paper decals.
This is a heart for those who love Dance and want to show it off by having it hang on a necklace, backpack or dance bag. Options are endless!!! Red made on my Bambu X1C and the green on my Mini Prusa
After I have downloaded and printed the nice cable cover from John @John_Smith (Thanks a lot). I saw the terrible cable salad behind the display. Immediately I made a Cover for this. Printed with PLA galaxy black, I love it.
Box Note 77mm Circle & Square post it note sticky notes cube 76x76mm
Bestie heart can be used for necklace/backpack/keychain. Fun little gift to make for your kids class. Enjoy!
Bohrlochabdeckug 11x14x4mm
Just print the case and the caps for the unused ports. This prevents that the ports get dusty. Prints without support.
Ich bin von dem Modell „N-Day Dovetail Pill Organizer with Print-in-Place Snap Lid” von Jerrod H. begeistert. Ihm gebührt aller Dank. Da ich eine Tablettenbox mit vier Fächern benötige, aus der sich die Tabletten sehr einfach entnehmen…
Install with an M3 or M4 countersunk screw. I printed it as follows: PETG .1 mm layers .4 mm nozzle no supports 5 perimeters Would love to see your makes! :)
A storage for the Harder and Steenbeck Ultra airbrush. You need 8x 6 x 2 mm magnets This is part of my magnetically stacking “Airbrush Storage” system. Check out more parts for this system and my other airbrush models here on printables .…
Just a woggle I made for myself and my scout friends. I advise to use supports for the ring.
I love my Mechanism mounts and accessories for my Steam Deck. Although, I found it annoying that I had to take my kickstand off to attach anything else. I remixed these models to allow me to attach two mechanism mounts/accessories at once…
Ich habe hier einen einfachen Rauchmelder Konstruier der mit kleinen 3x2,7mm Magneten (rund) an der Decke schnell und einfach angebracht werden kann, um die Öse für die z.B. Liebesschaukel zu verstecken. zum anpassen an andere hacken oder…
After printing, bend the inner part out slightly so that it can snap into place later. Printing in PETG 15% Infill 0.20mm Quality
This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…
Replacement handle for router base from Porter Cable, Black and Decker, and DeWALT. Replaces part 908572 Print in the original orientation. No supports are needed. PETG or other high temp filament recommended with at least 3 perimeters…
The 'pointy' hook fits the handle perfectly, the flat one is for the front handle. Printing the hooks is very easy, no supports required.
Hello, this is a nice helpful Stand that was remixed from titusou, I added some more room to fit also the Steamdeck I am happy if it is useful to you, Cheers ;)
This kickstand card holder combo for the Steam Deck allows you to have a low-profile storage for 4 micro-SD cards and enables the Steam Deck to stay standing up on its own using a print in place kickstand. This kickstand card holder is…
Designed to work with Nestea's Steam deck stand . I wanted to create a mount to firmly connect my steam deck to a small PCB keyboard for desktop use (and to have a good charging location). Add rubber feet on the PCB to avoid sliding. I'm…
