314 modeli
Wanted to create a way to make wheel sets for HO railway cars. Two parts wheels and axle, easiest to print separately. I recommend doing 4 axles at the same time, works best with my Prusa. To get them glued in all the right angles, print…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Recommended Print Settings Print Layers: 0.15mm Infill: 15% Color Bottom Layer (mm) Top Layer (mm) Red 14.25 15.05 White 13.25 14.25 Blue 12.20 13.25 Gold 11.50 12.20 Light Blue 9.50 11.50 Grey 7.50 9.50 White 0.00 7.50
Wydruk około 9,60 €–11,73 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Model Info Foldable Phone, Kindle, or Tablet Stand - easily printed in place. Including a folding mechanism with auto stop, see the pictures!…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
Additional M2x6mm screws are needed. Simply unscrew all four existing screws and place the adaptor on top of the plastic cover. M2 screws should just fit in without any problems. Do not use extensive force! Afterwards, any SteelSeries…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Kegelsenker Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Kegelsenker 1: 12.4mm Kegelsenker 2: 16.5mm Wenn der große Kegelsenker kippelt kann unter dem Schaft eine Stütze eingeklebt werden. Filament: Verbatim grau PLA
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
This is a holder for Steelseries headphones Chatmix dial. The mounting point will print solid and will need to be drilled out by the printer to fit the appropriate mounting hardware you'll be using. Can be mounted to any solid surface,…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Tablet holder, perfect for typical tablets like Apple Ipad 11". Fixed on a normal tripod thread. Print Settings · model in photos printed with MK4 | Extrudr XPETG | 0.4 mm nozzle.
Wydruk około 4,27 €–5,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this for my dad who repairs clocks and watches for a hobby. It fits his eyeloops rather nicely though one of them was a bit large. Ive included a calibration ring to see if it fits your eleyloops. The gcode is for PETG on a…
Wydruk około 4,46 €–5,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A quick and simple plaque for the football fan in your house. This was printed in PETG but works as well with PLA. The Gcode has a 'pause for colour change" set where it needs to be for the change of word colour. The STL are for you to do…
Wydruk około 2,36 €–2,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My new model for Halloween 2020 Count Dracula - Leslie Nielsen Happy Halloween I added a second version for larger printing Print instructions I recommend supports under the ears, nose and front teeth
My Steelseries Apex keyboard recently lost one of its rear feet during a move, and Steelseries support doesn't sell or provide replacements. This is a model for a replacement foot that roughly matches the stock foot – it's not an exact…
The 3D-printed dragon clip (alligator clips) is a useful tool for securing small components. It includes a head, rod, and base, with an optional cylinder for added grip. The head holds small items securely. The assembly is simple, and it…
This is a full set of poker chips designed for the game Ready Set Bet by AEG. This is designed to work with my insert for the game . There are printable poker chips for player tokens and money chips all the same size as a standard poker…
A cheap and easy fix for cracked and broken Arctis headphones, You will need, Retaining Clip plyers or E clip plyers Loctite Super glue MUST BE THIS TYPE! A soldering iron A screwdriver A 11mm or 7/16" drill bit OR Dremel and patience……
This is little Chelsea fc display you can put under your TV while supporting Blues. :
The model without magnet insert can be resized as you like. For the model with inserts use 6x3 magnets.
Lego train wheelset slide top. Not 100% accurate but it fits. My kid snapped the original rotational axis after crashing the train. So this is my attempt to fix it. In my case parts joined on top do spin but don't spin freely. It comes…
Amazing detail in this model by Chelsea Creates Things. Supposedly can print with no supports… I didn't have luck and so this was my first print with the new organic supports.. pretty cool…
This is a parametric solder spool that I originally remodeled for the Pinecil case created by Termiman (which is a remix of a remix of a remix from what I understand). By adjusting parameters within the included Fusion 360 file it can…
if its doesn't fit try making it smaller. :)
I need to travel with my headset sometimes and decided to create a case for it! Can hold both the headset and the DAC along with any cables you may need as well. DAC fits in the middle of the headset band (see image) inside the case. Fits…
Very fun model of Orko from Masters of the Universe. Printed with the base, but didn't need it. Also printed with full organic supports. Came out quite nice. Now to paint…. Much thanks and all credit to ChelseaCreatesThings on Thangs.
The Blues! Convex version, letters are raised and top layer. There is a concave version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I…
Note: I have added the Flashforge parts. https://www.printables.com/model/1220294-flashforge-adventurer-5m-ad5m-retrofit-minimal-enc
This is a small tray that gets screwed into the underside of a table or a shelf, next to the edge, for conveniently mounting the SteelSeries GameDAC. All ports remain accessible. Designed for screw mounting, but Command/Power strips might…
Enables you to mount your Steelseries Arctis Nova Pro DAC to your Aluminium profile simrig. The mount also has a place to store your spare battery.
This design does not actually use a 3D model, but uses the base features available in PrusaSlicer. It's a Shape-Box scaled to 150x200x40mm, and then a modifier box that is larger, but shifted up so it doesn't cover the bottom 1.5mm of the…
Intro: This is a travel case I have designed for traveling. It's fits the Nova 7, and I assume the 7X and 7P. There's a smaller compartment to fit the wireless receiver and a small charging cable. Print settings: I printed this all in PLA…
I printed these with PLA+ with a 4mm nozzle and 0.2mm layer height. I used the default Cura profile for PLA. I advise using raft for adhesion as it will help with the support material removal. You'll also need magnets from amazon, I used…
Einfach zu bedienen ----- Einfach eine Reihe von Löchern bohren, in die Mitte des Stifts schieben und das Gelenk zusammendrücken. Der Punkt in der Mitte des Stifts markiert genau die Position des Lochs auf dem anderen Element. Breite…
A lightweight shell for Steelseries sensei 310. After buying a new mouse, my old one was left collecting dust. Heavily inspired by Optimun Tech's Zeromouse ( https://www.youtube.com/@optimumtech/ , https://zeromouse.co/ ), I modelled this…
It is recommended to print on a high-resolution 3D printer and not FDM since the distance is very small
This is a remix from https://www.thingiverse.com/thing:398515 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Devil Design PLA Green
dovetail carriers are glued to any object that needs to be often relabeled
The stand is a single piece printed on the back vertical face with no supports required. It is my own design using FreeCAD 0.19 specifically to fit over the Siberia 840 OLED Transmitter unit. The transmitter case seems to be the same size…
German: Ich habe ein Laufgitter für Babys und kleine Puppen konstruiert. Die beiden Füße müssen mit Kleber befestigt werden. Englisch: I designed a playpen for babies and small dolls. The two feet must be attached with glue.
This is a remix for fitting my base I printed the Original part in DevilDesign Black PLA, and I wasn't able to fit the deck in the support without snapping in 2, so i made this remix to fix the problem Steelseries Artics Pro Deck
Hello! I designed in Fusion 360 to help get my DAC mounted underneath my desk.
My Steelseries Aerox 3 WL has been sliding around on the original stand so I created a bit less universal mouse pillar. I started from the ground-up again based on the measurings of the original STL.
Holder for Arctis Nova Pro Wireless and the Base Station Category: 3D Printing
I recreated the headphone cup caps (they may be called “Speaker Plates” for my SteelSeries Arctis Pro Wireless. It maybe be possible to FDM print these with a 0.4 mm nozzle, but I have not attempted it yet. I just wanted to try and…
Printed 0.15mm Filament: 3DJAKE magicPLA
Whenever I travel, my growing collection of cables and adapters seems to spread itself out all over the place. This little box helps me keep things where they belong until I need them. Cable, adapters, batteries…or whatever else you fit…
Mouse Holder(Case) - Steelseries - Rival 3 Very simple with Steelseries logo for desk. Internal Dimension: 67.5 x 42 x 63h mm Also check the radius of the curvature if it is suitable for your mouse, the model it can be rescaled. Add Model…
Info: These holders contain of left, middle (optional) and right part . The system is adjusted for my solution, where I needed to hang it over my other construction (see photo) Middle part is universal (but i did not used it) Dimensions:…
Updated 11/14/24 Should load into slicer as intended to print, minimal or no supports. Thanks for the help with development and testing to user @Arson_2595054
This model is compatible with the lego system.
Printer: MK4s Layer Height: 0.25mm Nozzle: 0.4mm Materials used: PETG / PLA Supports needed: No Infill: 15% Print times: Total: 5h29m / 55m white / 4h34m black Need help? Find me on Discord: https://discord.gg/NndzwJvN
Steelseries headbands are notoriously bad. Comfy, but wear out easy. This clip for the Arctis Nova Pro is made to hold the headband securely in place. Printable in PLA.
Simple holder for SteelSeries Arctis 1 Wireless headphones, would work with other headphones of the same brand with same cable extender for dongle. Jednoduchý držák pro sluchátka SteelSeries Arctis 1 Wireless, bude fungovat i pro jiná…
I designed this speaker mount for my SimLab P1-X Pro using the SteelSeries Arena 7. Should work with Arena 3, 7 & 9. Should also work with extrusion profiles for various sim racing frames. Mounts using single M6 socket head bolt. SimLab…
I was asked to print something as a temporary fix for our measuring cups as the original keeper ring broke. Nothing is more permanent than a temporary fix. Over a year later and still going strong in PLA. PETG would likely be even better.…
Design does not have screw holes. I glued it to wall and it holds up nicely. It is a bit long to wall to prevent headphone rubbing against wall. Design has step file so you can modify it your needs. No supports needed
Here is a parametric picture frame I designed (Fusion 360 hobbyist lics) for HueForge models. I have posted just the Fusion 360 file for now, but will post meshes for common HueForge sizes soon. Included pics of a couple examples to show…
◾ Size: 20cm / 7.9 inches in width, 20cm / 7.9 inches in height, and 0.3cm / 0.1inch in thickness. If you want to increase the size of the model, you can take it apart and print it separately. ◾ If you want to paint your model with a…
Hi there, i designed an adapter for all Arctis ear pads for the new SteelSeries Arctis Nova Pro Wireless headset. assembly Instructions: You need to remove the ear pads (there is a video on youtube on how to remove it) check if the…
The Blues! Concave version, letters are sunken. There is a convex version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at…
These simple DeWalt contractor batteries are actually 5S2P of Panasonic/Sanyo NCR20700A cells , with each cell rated at 30A continuous discharge . Use them to make your 10s electric skateboard FLY with 60 amps for a fraction of the cost…
Steelseries Arctis Pro Cyberpunk plate Just need magnets once printed You can use multiple colors using mmu/coolor change as height are different for each colors. Though I would recommend resing printing and painting
There are many other models like it but I wanted to create my own. This model allows you to discreetly attach an AirTag to anywhere you can find a suitable M5 sized hole. Required Hardware 3 M2x6 (ish) self tapping screws 1 M5 hex nut 1…
This holder will let you place once for all the transmitter under your desk. It have not being designed to be removal. It's ugly but work's well. You can place it with 3M tape under a glass table or any desk. The battery tray is still…
Entdecken Sie dieses exklusives Weihnachtsbaumkugelset mit fünf einzigartigen Kugeln im harmonischen Design – perfekt für eine festliche Atmosphäre. Jede Kugel ist nicht nur kunstvoll gestaltet, sondern auch mit einem intelligenten…
Print instructions Print in PLA The multi-color effect can be easily achieved even on single-color printers. Just print the logo first, change the filament, and print the cover “on top” of the logo. To avoid collisions, the logo and cover…
Presenting a take on Tom Nardi's (HSW) creation, catered specifically for those seeking a Steelseries Logo Version. Behold!, three distinct Width versions, measuring 35 mm, 45 mm, and 55 mm, each offering both extruding and intruding…
Battery case for your SteelSeries Arctis Nova Pro headset. I only used prusament PLA for this, 15% infill, brim, no supports. Pretty much default settings. Most filament materials should work.
Inspiration from this .
Update: Added a MEDIUM size which should sit tighter than the large but not give you a headache. After using my Arctis Nova 5 for barely over a year the outer frame snapped when I was taking it off normally. Quite disappointing. Since the…
Pretty basic light box of the Chelsea football club logo. Its designed to hang on the wall. I utilize the remote controlled battery powered LED light strips for on and off with ease and no cords. Total face height is 1.2mm, with varying…
A small mounting bracket for the Steelseries Apex Pro keyboard to hold a USB Type-C female breakout board, allowing for the replacement of the USB Type-A pass-through port to be used as either a pass-through USB Type-C or to create a…
This is a tiny small print for key lock replacement Print into Super Quality mode Remove all previous lock support from key and glue with CA in place. Be carefull on centering key and switch.
Chisel guards for the following chisel widths: 1" .75" .5" .25" 1/8"
This is my first design. I wanted to learn Fusion360 and design a case that matches with my LED plate because for some reason it didn't match with existing makes. The front plate has a thin layer to let the light pass in front of each…
Bought a steelseries arctis pro wireless headsett wich comes with a bluetooth hub that needed some upgrades. Print x1 Hub Print x2 Feet Glue the feets on the bottom of the hub. Feets are taken from kafka who made a remix from Subsite
I added to Roysy's https://www.thingiverse.com/thing:3552925 tool wall woodworking plane holders. My remix is for the Lie Nielsen No. 4 Smoothing Plane. These part should be printed in the orientation shown in the picture with the base…
Remix of this silencer but including slots to hook a badge holder so that your silencer doesn't take off on you.
Wedge I made to stop sash windows from rattling. Print flat to get a grippy texture on top.
This is a clip to retain a smartphone to a game controller for playing games. Because the XBox and Playstation game controllers are more popular, the SteelSeries Stratus XL seems to be overlooked. So, I made this smartphone mount for my…
https://www.buymeacoffee.com/maxt ---------------------- 4 versions in one package: Heart with no holes at all Heart including a hole to hang it, or scale it down and use as a pendant Heart including a place for the arrow Bonus: first 2…
This device is intended to insure that your ground coffee powder is set uniformly before you tamper it. Inspired from earl258's "Coffee Distributor tools for espresso" , I've redesigned it so that you can choose the different parameters…
black until 3.8mm finish with gold
This is a mouse holder designed in SteelSeries style but can be used for non-SteelSeries mice with an additional option without the logo.
Having Aspirin close by could save a life if anyone is having a heart attack, Aspirin (chewable) can stop a heart attack and/or reduce the damage it has caused. I created this to hand out to my friends and family. I went and purchased a…
SteelSeries Arctis Nova Pro Wireless DAC Stand| Sat on table too low for me, so with zero experience i made that abomination. Tips are welcome
Bracket and horns for the Steelseries Siberia v2 headphones Remixed From: Little Horns by Scottland Print instructions I printed the bracket on edge with supports, but didn't require any for the horns.
Diese kleine Hülse (Maße: 14mm Durchmesser, 6,5mm Innenloch, 11mm hoch) kann in einen Keramik-WC-Sitz eingesetzt werden, um die Schraube der Klobrille zu zentrieren. Bei mir war die Öffnung in der Keramik 15mm groß - die Metallschraube…
I was looking for a rack or a hanger to store my bike wheels but could not find anything so I made this up. It will hold a set of wheels on the wall out of the way. Included is a tool to help position the mounting screws.
This mount was designed to attach the Hue Play lights to on my TV, but it can be attached to a wall or whatever you want. The Part named “hue mount” can be screwed into either the middle hole or the top/bottom hole of the light. You can…
Chelsea FC shield with flexi legs. Find others shields in my collection https://www.printables.com/@PipodV3D_2293483/collections/1979805
This is just a holder for my Lie-Nielsen No. 60-1/2 Adjustable Mouth Block Plane.
