232 modeli
Art students use the 10 different size Micro pens to draw in black ink on white paper. When using all these different-size micro pens, I wasted too much time looking for the desired pen size on the end caps, which display the size. The…
Wydruk około 5,61 €–6,86 € nettoWstępna wycena jednego wariantu
This will hold a standard whiteboard eraser, cleaning fluid, and several markers. It fits either thin or normal thickness markers, and was designed specifically for either of these two starter sets:…
For the Bissell Pet Hair Eraser 2390 Cordless Hand Vacuum: https://www.bissell.com/pet-hair-eraser-lithium-ion-cordless-pet-hand-vacuum-2390.html Model inspired by Etsy listing:…
Simplified, "working", neuralizer from Men in Black. The idea is that you could replicate this project using anything from 1 hour (+ printing time of around 6 hours for a 2mm layer 0.4mm nozzle print) to a couple of days, depending on how…
Introducing the TPU Eraser, a residue remover crafted with unwavering precision to vanquish the elusive remnants left behind by the TPUs on the sacred grounds of the build plate. Anticipating meager results, I embarked upon this endeavor,…
The example is printed without supports (oriented on its side) using PETG with a 0.2mm layer height on an mk3s.
If you have a whiteboard these gadgets will be very useful. Holds 5 board markers and a board eraser. Can also be used separately. You can glue magnets at the back and install on a metal surface or use 3M double sided tape. Print…
A FUN ERASER HOLDER THAT ALLOWS YOU TO HAVE ALWAYS A SHARP ERASER!! Share your prints!! The shape of the holder allows to always have a sharp end of the eraser. Simple Assembly STEPS: I used this ERASER : https://amzn.to/3Xae5gQ (This is…
Uploaded files do not include the logo shown in the photos--feel free to add your own! Print with the back surface down and insert a pause to insert magnets. I used these magnets.
A simple holder designed to hold 14 Expo dry erase markers and one Expo dry eraser. I initially added 6 small holes in the back to hold six 8x3mm magnets, but I have also included a version with a flat back. I have also included a…
Printing Notes: I reduced the perimeters from 3 to 2 to make the text look better. Printed at 0.10mm height. Filament used: Overture Matte Pink PLA Post print additional work: I filled in the lettering with the some nail polish. Make sure…
Protects your eraser from getting all covered with gunk while it's in your pencil case. Swivel it closed when you need to put it away and swing it open when you need to erase. This version doesn't have any detents to lock in any of the…
I really liked @ dbfrompw_852503's version as it is perfect for the small kits you get with dry erase boards. But we have a small board so I wanted to mount my holder to the wall. I removed the magnet spots and added two tabs for using…
This thing is a wall mount for a Bissell Pet Stain Eraser (model 2054). Strangely, Bissell doesn't seem to have one available. Note: This version has small changes from the last one I printed. I added screwdriver access holes and fixed…
This Cherry MX-compatible 2U Backspace keycap is disappointed in your typing mistakes! It's supposed to look like an old school (pink rubber) eraser but it won't look like that right off the printer... To solve that problem you have to…
Simple toy version of 'Eraser Cat' from the game 'The Battle Cats'
Stores 5 fine Expo Markers, Eraser, and Spray. Can sit at a table or be wall mounted. Prints in about 3.5 hours.
Instruction: Find a 2-inch hex bit (preferably worn one), Print the 2 pieces (no support is needed for the hex hole in the knob) Super glue them together, Cut a full size Magic Eraser in half (58 x 58mm, or 2 3/8 x 2 3/8 inch). Both the…
A simple white-board pens, markers, eraser holder. It can hold up to four standard markers, one eraser. It snaps directly to the side of a whiteboard, and a smaller piece to reinforce it. You can apply soapy water to make it easier to…
STL Files for cosplay Eraser Head Goggles. Minimum Printer Volume Required: 150 mm x 150 mm x 150 mm Fusion 360 Link: https://a360.co/2sJKCQU Extra: 1 x 3/8 inch side buckle release. (Strapworks) 1 x 1 ft yellow flat nylon webbing 3/8…
I needed an eraser shield for a quick drafting project, but couldn't find one at home or nearby store, so I made one. I used pictures of most common eraser shield patterns online for reference. Default height is 0.4 mm, but You can resize…
This is a replacement cap for the Uni Kuru Toga eraser, in case someone misplaced it. The fit is quite precise, you will most likely need to tweak a few things, mostly X-Y Hole compensation. There are 3 variations : One with looser…
An adjustable holder for a Pentel eraser. Print with no supports in PLA or PETG. Assembly: Push the insert all the way to the bottom of the holder; make sure that it is flat along the bottom. Slide in your eraser. It should slot between…
Printed a few pencil holders and I wanted a tray for erasers and pencil sharpeners. It's made for three cats. Thinking about making a version for two…
This is a super retractable eraser holder with a cap. It is suitable for erasers up to 21 mm wide and 10 mm thick. However, you can adjust it using grips. Glue is required to stick the 2 parts of the box together. I hope you like this…
I designed this compact marker holder. The 2 rows are different heights so that you can grab markers easily. The organizer is also angled toward the user for easier reach. Fits standard expo markers loosely, and fits Pentel markers…
hello! this is a simple model of a simple cat, eraser cat, from the battle cats! print with supports enabled and have fun with your cat army!
This is a holder for the Magic Eraser (standard/smaller-size) with a single-axis swivel that can be attached to a standard broom handle or extendable handle for out-of-reach areas. It comes as 4 separate parts: Eraser holder Threaded…
The felt pad has dimentions of roughly 300x50 mm with two 15 mm holes at the ends. It is best to mark them using already printed pieces. The magets you'll need are 6 of 5x5x5 mm neodymium cubes (that is just what I had lying around). To…
Daughter got the Our Generation school and needed a dry erase eraser. I glued on gray felt using E6000. Wait at least 24 hours for glue to set. Use this glue and of course heat your PLA in a well ventilated area. Follow instructions for…
Simple but effective holder for dry erase markers, eraser, and spray cleaning bottle. I used adhesive velcro to stick it to my board. I used 10% infill, but it's a matter of preference. No supports, of course.
Bissell pet hair eraser charging station. Print instructions Category: Tool Holders & Boxes Summary Bissell pet hair eraser charging station. Print Settings Printer Brand: Prusa Printer: I3 MK3S </div> Rafts: No Supports: No </div>…
My solution to my own problem. Figured I would share it. I hated the tiny eraser that came with my beloved P209 pencils and I hated the metal cap that I would constantly have to remove and was always afraid of losing. It press fits into…
STL Files for cosplay Eraser Head Belt. Minimum Printer Volume Required: 150 mm x 150 mm x 150 mm Fusion 360 Link: https://a360.co/2t10jDo Extra: 1 x 2 inch side buckle release. (Strapworks) 1 x 2 ft black flat nylon webbing 2 Inch.…
This fits 12 Expo fine tip markers as well as the Expo eraser . Prints with no supports, I used 15% infill.
I received a request for two more cookie cutters from the anime "My Hero Academia", this time it is Present Mic and Eraserhead (Hizashi Yamada and Shota Aizawa). Based on some very nice fan art, here they are. As always, I am including a…
Print with PLA, PETG, or the filament/resin of your choice Infill can be from 20 to 100 % as the walls are thin Conviently snaps onto stand There are two versions: one for the thin part of music stand, another for the thick. Choose wisely!
A simple and clean holder for your dry erase board markers and holders that doesn't ruin the look of your modern glass dry erase board. 👌 The model should be printed upside-down with no supports. The cavities for the markers and the…
You can use 3M adhesive/velcro strips or something equivalent to adhere to white board.
Needed a simple holder for a whiteboard, so I designed this one
A bolt action pen with a Frixion eraser. Includes original pen cap. If you want you should be able to use a 3m screw instead of the printed bolt. Takes Pilot Frixion cartridges, although you can also use any G2 sized cartridge. Printing…
Magnetic Whiteboard Markers & Eraser Organizer for Expo or similar markers. On the back it has 6 recessions to put 15mm-diameter magnets. You can use superglue or hot glue to attach them.
I designed this whiteboard marker holder when I couldn't find one that served my purposes and that I liked while being easy to print with minimal waste. The holder is designed to hold 4 Expo style whiteboard markers (20mm diameter) and…
Inspired by aircraft models, making it easier to access pens, dry erase markers, and dry eraser when needed
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This pencil case was specifically designed for three of my…
Not the most material-efficient HSW marker holder, but it suited my needs for the amount of markers I had. Print upright, and use supports. This piece uses the hollow insert you can find in the original printable's files. Marker Holder…
Gridfinity 1x2 bin that holds up to four Pentel Hi-Polymer Erasers w/ sleeves. Print looks bad, was testing something, should not look like that for you.
I thought an eraser could work well as a rubber tip but it didn't turn out as well as I'd hoped. This uses an eraser from a Ticonderoga NO.2 Pencil. Cut it from the base with a razor and slot it into the performance tip. make sure you…
Needed one a little smaller than TJBLACKFORD's Dry Erase Marker & Eraser Holder ( https://www.thingiverse.com/thing:3097782 ). Also added magnet holes (…
Quick and easy Gridfinity Holder for 2 Erasers and a Pencil Sharpener :)
Just a simple pencil case I made once my old one broke down
Mr Clean Magic Eraser Holder for Sawzall I created this model because I needed a way to hold a Mr. Clean Magic Eraser with a Sawzall so I could use it to scrub the siding on my house. This design modifies an off the shelf tool you can buy…
A simple caddy that holds 4 Expo sized dry erase whiteboard markers, a white board cleaner spray bottle, and a felt marker. I simply attached the caddy to the wall with dual-lock. The markers fit loosely upright or upside down.
Simple holder for a dry eraser and 3 pens. Option for magnetic mounting (push in qty.4 of 8x3mm magnets in the back) or screw mounting. Also see: https://www.printables.com/model/1161292-whiteboard-magnetic-card-holder
replacement eraser cap I made for the Uniball Kuru Toga Elite mechanical pencil because I lost the original one
Easy print. Can be used with most large erasers, although I designed it to fit the white Pentel hi-polymer eraser specifically.
Flip the model upside down and insert
Staedtler Mars Plastic drafting erasers are great, but they pick up a lot of dirt. Here's a very simple spiral-mode case that fits your eraser snugly. The cap can be posted on the end and it'll (mostly) stay put. Print Settings Printer…
A simple magnetic holder for an Expo dry-erase eraser, perfect for sticking to a fridge or whiteboard. Requires two neodymium disc magnets, either 6x3mm or 8x3mm. This design uses embedded magnets. To set this up, in your slicer, insert a…
I needed a place to store some rubbers erasers, so I designed one. Hopefully this is helpful to someone out there! No special print instructions.
Eraser tool pro kit! Display side by side your favorite tipp ex and rubber. A bit loose for the tipp ex due to the akward design but very functionnal!
Remixed from https://www.printables.com/model/597774-pica-dry-color-caps This adds a slot to add in a Pica Fine Dry eraser or any eraser with diameter 5.5mm
Dry Eraser (Expo) holder which slides onto 19mm whiteboard. Tall back save the wall!
Once you use up the eraser you can take some snips and resize the case.
Basic marker holder and sponge eraser holder. Holds three Expo markers and one sponge style eraser. Easy to mount to a whiteboard or wall with double sided tape or similar. The slots have a dust hole in the bottom to hopefully keep them a…
pencils max size: 8 mm pencil eraser size: 19mm x 14mm pencil sharpener magnet size: 6 mm (printed with supports)
A fun little addition to your back to school stationery, An armour for the true hero, “the eraser of your mistakes."
Remix of K73TXT's cap. I love the pencil but the tiny eraser always had me reaching for other writing utensils. With this adapter, you can use the erasers with cheap BIC-type pencils to expand your eraser capacity. The original eraser can…
An easy way to attach an eraser to your dry erase markers while maintaining the ability to place the cap on the end of the marker while using. Fit is snug, but not too tight on my prusa XL when printed at .15mm LH. I used PLA, and it…
This is a hook meant to slip over the top of a hanging white board to hold the eraser.
I recently purchased a dry erase board, but I was very surprised to see most models out there hold the markers wrong. They need to be placed flat or tip down to prevent drying out. This design really doesn't have an good mounting…
hexagonal shaped whiteboard maker and eraser holder for up 10 marker. version for either: tape magnetic (10x50 mm) 3 mm tick
This is a remix of Luma's Wall Control System to hold nine slim line expo type markers, an eraser and cleaning fluid.
This is a print-in-place design for the Kuru Toga pencil. I loved the pencil, but the stock eraser sucked. This is a drop-in replacement that is compatible with the Papermate jumbo eraser or a standard pencil eraser and has a similar…
Just a simple storage solution for the crayola Take Notes! These have a funny lid but wanted them cap down .
Whiteboard Eraser & Pen Container
Simple command-strippable holder that fits an expo dry eraser and 5 thing expo markers. Print with whatever infill you'd like, sideways orientation.
Update 2-24-18 I haven't had much time to work on this mag, but I did find out that trying to make .43 caliber (first-strike-like) rounds is going to be a pain with a standard .4mm nozzel. So instead, I think I'm going to try to make a…
The model now fits a 45 mm wide felt pad and the square holes for the magnets have been filled and substituted by two holes for cylindrical magnets (8 mm diameter, 3 mm height).
Slide a standard Mars Staedtler block eraser in the clip and the inside nubs will grip the eraser and prevent it from falling out. The long clip slides into the spirals of a standard spiral-notebook to keep your eraser at-hand wherever…
This is a pencil holder that also has five holders for the pink erasers on the outside. There are holes around the edge where you can place sharpened pencils pointing down and they will not break or get dull. students can quickly identify…
I include 3 models here. Goal is clean, minimal and won't trap dust. I first tried the larger model I provide here with strong magnets on the back to stick to my (metal backed) whiteboard, but the magnets would not hold. The metal is just…
A versatile all-in-one marker and eraser holder for dry erase (e.g. whiteboards.) Initial release: Havent printed to verify dimensions. Consider this an alpha. 1.0 Release : No changes - Print came out and worked well. Upload photo.…
You need 6 Neodym Magnets 5x5x20 mm.
Need a place to store your Dry Erase Board Cleaner and the Eraser - better yet, need a place to store those items utilizing the Gridfinity system? Well now you have it! This utilizes a 3 x 2 Grid for the Gridfinity Base System. Coming…
I made this to use the refill of my broken pencil They can be bought all over the internet under the name BM2: https://www.amazon.com/s?k=bm2+eraser+refill It works by rotating the cap which moves the eraser in and out. I included the…
Quick and simple eraser and spray mounts for easy access near your dry erase board.
I use this to organize our markers for our whiteboard calendar. I designed this in Onshape. All of the models I done in Onshape have had issues scaling when sliced. If needed, just scale the model 2540% to switch from mm to inches. For…
I made this model because i used up the eraser and wanted something to cover up the hole with. I needed something so the graphite rods don't slide in and out of the holder.
An organizer for 3 whiteboard markers, an eraser, and cleaning spray
A box to store your kneaded eraser to keep it from collecting dust and particles. No supports required. Designed for .2mm layer height. Print in default orientation.
With the environmental issues we are facing today, I felt guilty everytime I reach out for some paper to rough out a design sketch or to perform some calculations. As a result, I have now taken up mini whiteboards as my scratchpad. The…
Fits 20pcs of ~10mm diameter chalk and up to 100mmX140mm eraser. The eraser tray and chalk holes are roughly 15mm deep. Including the screw flanges, the holder is 245mm x 110mm x 20mm.
Printed in only 40 minutes but not print in place. Take apart your old erasers Glue two bottom parts together twice Place the erasers in their reserved slots Glue the rest together
A simple, no support and customizable whiteboard eraser Supports text I made one with a green felt on the bottom maching the green pen Changes Fixed text vertical position Category: Hand Tools
Clip with eraser holder for 7mm thick pencil, e.g. from IKEA. Can also be used as a cap / lead protector. Printed from PETG standing upwards (see 3mf project file). There might be a slight variation in the thickness of IKEA pencils, if…
Designed in Shapr3D - I needed an Expo marker holder that could also hold the spray bottle. Here are the magnets that I used for the back. Just a little hot glue will hold them in place. :…
this is a small quick pencil holder that takes up little desk space.
Holds a microfiber cloth to make a chalkboard eraser. Could be used for any other cloth you like. Large size; base is 100mm x 200mm and handle width is 86mm. Grooves along the side make it easier to hold, and it could be scaled down for…
This Gridfinity block is designed to hold two containers of pencil lead as well as eight replacement erasers for the ends of mechanical pencils. The diameter for the pencil erasers which fit in the holes is approximately 4.5mm.
