Wyniki wyszukiwania: esso

Sortowanie

6989 modeli

P
PrintablesD6ta

Nespresso capsules holder

Nespresso capsules holder

Wydruk około 4,59 €–5,61 € nettoWstępna wycena jednego wariantu

Pobrania
3506
Polubienia
512
Ocena
4,84
P
PrintablesMichal Blazek

Nespresso capsule holder

Small Nespresso capsule holder. Two variants - for 24 pcs (only Part 1) or for 48 pcs (Part 1 and 2). You can remove the cover and fill the capsules into the holder body. Print instructions Printed with Prusament PLA, without supports.

Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu

Pobrania
2989
Polubienia
399
Ocena
4,86
P
Printablesmedyk3D

Thimble - sewing accessory

To scale it in PrusaSlicer, add cylinder shape, make it the same size as your finger and scale the thimble until you're satisfied with the fit.

Wydruk około 0,58 €–0,70 € nettoWstępna wycena jednego wariantu

Pobrania
1294
Polubienia
194
Ocena
4,94
P
PrintablesPaul

Accessory Bins for AnkerMake M5C

Two color design The base has interlocking cut outs for the rings, which are supposed to be printed in another color. If you only have one color, or you just want to print it as one piece, please use the one color model. One color design…

Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu

Pobrania
1289
Polubienia
186
Ocena
4,75
P
PrintablesAlessio

Useful ACCESSORIES for Cooler Master QUBE 500

With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…

Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu

Pobrania
1005
Polubienia
183
Ocena
4
P
PrintablesFestool

Festool Mobile drilling attachment MB 40 - Accessories

Festool Mobile drilling attachment MB 40 - Accessories Do you already know our Mobile drilling attachment? The MB 40 mobile drilling attachment is your companion when precision is required. Print your own Festool Accessories for the MB 40…

Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu

Pobrania
978
Polubienia
109
Ocena
5
P
PrintablesAdam

Nespresso Pod Basket

This is a basket for the Nespresso pods. currently not printed the model but should be able to fit a good amount into it and you can scale down or up depending on your printer size. Size: 222x222x150

Wydruk około 21,17 €–25,87 € nettoWstępna wycena jednego wariantu

Pobrania
729
Polubienia
131
Ocena
4,83
P
PrintablesPeter Farell

Doll House 50 bar Espresso Maker

Doll House 50 bar Espresso Maker / Coffee Machine. 50 bar? why not. g-code not necessarily to scale. Please resize to your scale.

Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu

Pobrania
728
Polubienia
244
Ocena
2
P
PrintablesMichal Blazek

Nespresso Capsule Holder

Nespresso Capsule Holder - remodeled

Wydruk około 7,67 €–9,38 € nettoWstępna wycena jednego wariantu

Pobrania
726
Polubienia
167
Ocena
5
P
Printablesmchangcreative

Espresso portafilter paper filter cutter (multiple diameters)

Update 12/18/23: I have found that using a square of shelf gripper, liner, foam under the cutter prevents the base from rotating. See third photo. Press firmly on the spindle with one hand while rotating the blades with the other. Cut two…

Wydruk około 4,38 €–5,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
720
Polubienia
118
Ocena
5
P
PrintablesIshdo

Esspresso Portafilter Funnel (53mm, 57mm, 58mm)

Portafilter Funnel for espresso machines, comes in multiple sizes. Features: Tamp through Prevents waste (Spill over) Sits properly no magnets needed! Works well in combination with WDT tool Easy to clean Beautiful Print instructions…

Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu

Pobrania
704
Polubienia
45
Ocena
4,43
P
PrintablesEric BEAUGUITTE

Nespresso Vertuo Dispenser

I got a new Nespresso machine (Vertuo) for my birthday. I have decided to rint my own dispenser for the pods. I wanted something useful and easy to print. The model comes with 2 parts: Bottom and Cover. Those parts can be fit on a Prusa…

Wydruk około 4,54 €–5,55 € nettoWstępna wycena jednego wariantu

Pobrania
674
Polubienia
140
Ocena
5
P
Printablesjschneekloth

Nespresso Vertuo Pack Holder

Nespresso Vertuo pack holder. Prints in two sections which can be glued together and should hold an entire package of Nespresso Vertuo pods.

Wydruk około 9,59 €–11,72 € nettoWstępna wycena jednego wariantu

Pobrania
645
Polubienia
67
Ocena
5
P
PrintablesAmpallang

Nespresso coffee capsule cup holder

Wanted a better spot to put our coffeecups. 6 holes for screws. Size: 230mm x 169mm holds 24 cups. Made my wife actually happy, it might be the reason she allowed me to buy the Prusa XL. Printed mine in PETG with brim.

Wydruk około 3,56 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
645
Polubienia
90
Ocena
5
P
PrintablesLooxoor

Nespresso capsule holder

A quite minimalistic holder for Nespresso capsules. Holds 5x4 capsules. Print instructions Prints without supports as is.

Wydruk około 15,04 €–18,39 € nettoWstępna wycena jednego wariantu

Pobrania
627
Polubienia
84
Ocena
4,67
P
PrintablesravingDIODE

Nespresso Capsule Holder / Stand (Square - 20 Capsules)

This is a square version of my Triangular Nespresso Capsule Holder ( https://www.prusaprinters.org/prints/20307 ). This capsule holders takes 20 Nespresso or Nespresso Compatible capsules. Print instructions This can be printed at any…

Wydruk około 6,69 €–8,18 € nettoWstępna wycena jednego wariantu

Pobrania
566
Polubienia
52
Ocena
0
P
PrintablesLXO

Espresso tampers and holder

The fourth thing in my Week of Things, some useful, some just for fun. Thought this would force me to post some of my projects. Most are semi useful/functional and some are purely inspirational. After getting a Gaggia Classic espresso…

Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu

Pobrania
479
Polubienia
68
Ocena
5
P
Printablessacrilegor

Tamper guide for Cafelat Robot espresso machine

This tamper guide makes your ground coffee flat, so earth can stay round! It is a really tight fit on the tamper, so no screws needed. Print it on PLA or PETG. No support needed! (The inside of the model ends in a cone, so you can print…

Wydruk około 3,11 €–3,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
473
Polubienia
32
Ocena
5
P
PrintablesHLFR ENGR

White Board Mount & Accessories

Mounts: These mounts were designed for Mead® White Board 85356 to allow the board to be quickly removed from the wall without tools (post installation). The mounts work by allowing the board to sit on the Bottom Mounts and swiveling the…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu

Pobrania
413
Polubienia
276
Ocena
5
P
PrintablesPhilip

Oversized Nespresso VertuoPlus Replacement Drip Tray

Two file build, with the grate simply sliding into the tray, no intense assembly required! Remember that coffee is hot, so please consider which filament you are using for the print. ASA/ABS or PETG should hold up better for this…

Wydruk około 6,87 €–8,39 € nettoWstępna wycena jednego wariantu

Pobrania
395
Polubienia
23
Ocena
5
P
PrintablesPrism08

Unimog RC accessories right side

31/12/24: Adding the exhaust pipe. This goes with my UNIMOG RC Chassis . For the exhaust you need to remove the battery shelf and then screw x2 from inside the chassis. The Ad-blue tank includes the bracket for the steps and has also 2…

Wydruk około 3,30 €–4,03 € nettoWstępna wycena jednego wariantu

Pobrania
377
Polubienia
47
Ocena
0
P
PrintablesPeter Velebír

NESSPRESSO Essenza Mini - new parts

replacement for the original four-piece set náhrada štvordielnej originálnej sady

Wydruk około 0,67 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
353
Polubienia
38
Ocena
0
P
PrintablesMacronot

Nespresso Capsule Holder

Holds 20 capsules. Brim required for stability Print instructions 15% fill Update: New version available here https://www.printables.com/model/129039-nespresso-capsule-holder-version-2

Wydruk około 4,19 €–5,12 € nettoWstępna wycena jednego wariantu

Pobrania
343
Polubienia
33
Ocena
4,33
P
PrintablesBilld

Dyson V6 Vacuum to V8 Accessory Adapter

An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…

Wydruk około 4,40 €–5,37 € nettoWstępna wycena jednego wariantu

Pobrania
337
Polubienia
27
Ocena
5
P
PrintablesCatja

Webbing/Strap Clip Accessory for Thermacell MR300/450

While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…

Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
309
Polubienia
62
Ocena
5
P
PrintablesAdam Brown

Nespresso refillable pod tools

Hopper and tamper for use with Nespresso refillable coffee pods Printed in PLA, 0.2mm

Wydruk około 3,57 €–4,36 € nettoWstępna wycena jednego wariantu

Pobrania
299
Polubienia
62
Ocena
5
P
PrintablesLy

Cat & Accessories - No Supports

Cute cat along with accessories for the dollhouse. No supports.

Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
297
Polubienia
107
Ocena
5
P
PrintablesJoFaTech

Nespresso capsules holder - Prusa MINI

Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…

Wydruk około 3,58 €–4,37 € nettoWstępna wycena jednego wariantu

Pobrania
248
Polubienia
22
Ocena
5
P
Printableszazaw1zard

VW Golf 3 cupholder/ashtrayholder for dashboard acessory slots

This is a remix of my original acessory-clip for the slots under the ac controlpanel in a VW Golf 3 I recommend printing it in PETG with tree supports. If possible use 100% infill to make sure the retaining clip has the best chance of…

Wydruk około 2,67 €–3,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
212
Polubienia
26
Ocena
0
P
PrintablesCelta

Nespresso Capsule Recycler

Recycle your Nespresso capsules Changes I've used the cutter and cleaner from Steve_AU and the container idea for M600 , however, I redesigned the container/lid to be more practical. Note: the lid has a 0.3mm gap in order to have enough…

Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu

Pobrania
207
Polubienia
43
Ocena
5
P
PrintablesCorey Ward

Tineco A10/A11 Hero Latch Replacement (Accessory attachment)

This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…

Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
163
Polubienia
9
Ocena
5
P
Printablesmarkus_m83

Einkaufswagenchip ; Shopping Cart Chip ; Key Accessoir with Initials

Hey there, Here I have some removable shopping cart chips. Just insert them proberly and remove 'em after your cart is freed from the chain. The initials on the blue one are customizable (Fusion 360), therefore donwload the .f3d document.…

Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu

Pobrania
153
Polubienia
4
Ocena
0
P
PrintablesBrian

Nespresso Vertuo Capsule Holder with 3 drawers

One piece version of the excellent Nespresso Vertuo Capsule Pod Dispenser by sdgsean. Modeled to support 3 slide out drawers of the original design (included here but is the same as the original model). Printed front facing side down with…

Wydruk około 39,36 €–48,11 € nettoWstępna wycena jednego wariantu

Pobrania
152
Polubienia
13
Ocena
0
P
PrintablesEmkatech (Mike)

Chainmail Cup Coaster – Stylish 3D Printed Table Accessory

Add a touch of medieval flair to your table with this chainmail-inspired cup coaster! The flexible interlocking design protects your surfaces from hot mugs and glasses while looking absolutely unique. Perfect for fantasy fans or anyone…

Wydruk około 4,07 €–4,98 € nettoWstępna wycena jednego wariantu

Pobrania
149
Polubienia
27
Ocena
4
P
Printablesd3thmch1ne

Turbo compressor

turbo charger, the fan aka turbine is in a .obj file and the housing is in a .gcode file

Wydruk około 9,35 €–11,43 € nettoWstępna wycena jednego wariantu

Pobrania
149
Polubienia
9
Ocena
0
P
PrintablesRobertusMaximus

Freight Ten Sides "Accessories" - Model Science Fiction

Freight Ten Sides "Accessories." This set of sides for all the Freight Ten models. Keep your stuff from falling out. BullNose Freight Ten: https://www.prusaprinters.org/prints/143750-freight-ten-bullnose-model-science-fiction Single Cab…

Wydruk około 8,43 €–10,30 € nettoWstępna wycena jednego wariantu

Pobrania
137
Polubienia
35
Ocena
0
P
Printablesinfn8

Nespresso Vertuo Capsule Dispenser - Dual large

Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.

Wydruk około 6,77 €–8,27 € nettoWstępna wycena jednego wariantu

Pobrania
136
Polubienia
49
Ocena
0
P
PrintablesMarc Brodeur

Nespresso

Cette boite est assemblé avec de la colle CYANOACRYLATE D'ÉTHYLE qui colle superbement bien, utiliser un cure-dent pour les petits supports et attention à vos doigts.

Wydruk około 6,89 €–8,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
134
Polubienia
30
Ocena
5
P
Printableskury

ABAC Air compressor motor fan

Spare part motor fan for air compressor ABAC Air Master Kit CE. Shaft diameter 14 mm. I printed on PRUSA XL with original ENCLOSURE: Filament: AURAPOL ASA 3D Filament Graphite Black 0,4 mm nozzle 0,20 mm layer 5 perimeters 15% infill…

Wydruk około 4,80 €–5,86 € nettoWstępna wycena jednego wariantu

Pobrania
125
Polubienia
12
Ocena
0
P
Printableskjrps

Accessory cover for waste bin "Prusa Bin MK4" (Ergänzung für diese Abfallbox)

It fits on this bin: https://www.printables.com/de/model/526044-prusa-mk4-bin

Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
119
Polubienia
20
Ocena
5
P
PrintablesMichaelKroes

Nespresso Krups Essenza Mini Intense Clip

Replacement clip for the water reservoir of the Nespresso Krups Essenza Mini Intense machine. UPDATE 2022-08-09 Added a version to be printed in ABS, this needed slight tweak to the model. So if your fit is to loose, you can use the…

Wydruk około 0,15 €–0,19 € nettoWstępna wycena jednego wariantu

Pobrania
104
Polubienia
18
Ocena
0
P
PrintablesScijoe

Box for Bosch Zamo 3rd Gen with accessories

This is a box for the Bosch Zamo 3rd Gen laser measure and its 3 accessories (tape, wheel and line adapter). The lid snaps on firmly and the parts are easy to take out. After i printed my box i added a little cutout to the pocket of the…

Wydruk około 11,12 €–13,58 € nettoWstępna wycena jednego wariantu

Pobrania
101
Polubienia
6
Ocena
5
P
Printablestimn

Xplora X6Play charger and accessory mounts

There was no suitable horizontal surface available close enough for the kid and in range of a socket. But a cupboard would allow easy mounting on the side. The charger mount may also be useful to avoid it from sliding around or falling…

Wydruk około 1,32 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
99
Polubienia
5
Ocena
0
P
PrintablesBurnsie

Leatherman Pouch Accessories

The side sections of a Leatherman are useful to hold additional tools such as saw blades, a pen or the bit extender but I always found they would fall out. So, I designed this simple holder with just enough clearance for the blades and…

Wydruk około 0,80 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
96
Polubienia
28
Ocena
5
P
PrintablesHeleplanchiste

Coffee Funnel to refill nespresso capsule

Coffee funnel for refillable Nespresso capsule. Help to not put coffee all around the kitchen in the morning! Very helpfull for me early in the morning when I'm not totally awake. If you print it, and it works for you, please rate it,…

Wydruk około 0,31 €–0,37 € nettoWstępna wycena jednego wariantu

Pobrania
95
Polubienia
12
Ocena
5
P
PrintablesFokieH

Shark Flexstyle Wallmount Accessory Carrier

Ein Halter um das Zubehör des Shark Flexstyle Föns griffbereit aufzubewahren. Den Halter haben wir mit doppelseitigem Klebeband an der Wand befestigt. Gedruckt in PETG im Modus 0,2mm Structural mit minimalem Einsatz von Stützmaterial für…

Wydruk około 5,11 €–6,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
81
Polubienia
12
Ocena
0
P
PrintablesCoolBlackCat

Lidl/Parkside Pegboard Accessory - Screwdrivers 0-5

I created a whole set of holders for my tools on a Lidl/Parkside pegboard. Check for the other holders on my page. Fusion 360 files attached for personal adjustments.

Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
76
Polubienia
6
Ocena
0
P
PrintablesDr.Enchanted

Lowrider 4 V4 Core Accessory V Slot

Provides a place to add attachments to the Core of the Lowrider V4. Like a drag chain or vacuum tube mount.

Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
70
Polubienia
7
Ocena
0
P
Printablesjohs32

Compressor oil cap M16*2 threading

My compressor broke its oil-cap. The cap was just a threaded piece, with a hollow cylinder above, and a small hole all the way through the top to allow pass of air, as replicated here. I'd recommend printing standing upright, with threads…

Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu

Pobrania
70
Polubienia
7
Ocena
0
P
PrintablesBroertour

Dyson accessory holder one hole version

Dyson accessory holder for wall mounting. Compatible with Dyson V7-V11. V15 (verified by me) reversible, works with front release mechanism or facing the wall. works with simple and motorized accessories Do not over-tighten the mounting…

Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
70
Polubienia
2
Ocena
0
P
PrintablesFiddly Bits

Improved accessory tray for Orion EQ-1 Equatorial Telescope Mount

I recently got an Orion telescope with their EQ-1 equatorial mount that's used with various models. The included tray was ok, but there's no organization for your accessories and they end up jumbled. This improved accessory tray has…

Wydruk około 8,52 €–10,42 € nettoWstępna wycena jednego wariantu

Pobrania
68
Polubienia
5
Ocena
0

Coffee Tamping station for 58mm Portafilter, puc and accessories

I purchased a new puc and coffee distributor for my Oster expressor machine. I needed something to hold the portafilter steady without making a mess and also to store it all afterards. This simple print will work for most portafilters…

Wydruk około 7,20 €–8,80 € nettoWstępna wycena jednego wariantu

Pobrania
59
Polubienia
1
Ocena
0
P
PrintablesHepcziiik

Y-fork - Loom Bands accessories

Fork for stringing rubber bands Loom Bands

Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
57
Polubienia
2
Ocena
0
P
PrintablesDr. Terra

Darts Accessoire Box

I have orderd on amazon a set of Darts for my electronic dart board: https://www.amazon.de/-/en/dp/B08FDXSFC8?psc=1&ref=ppx_yo2ov_dt_b_product_details As the tips and additional parts didn't come in a handy storage box, I designed this…

Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
54
Polubienia
12
Ocena
0
P
Printablespjvenda

Custom Nespresso Capsule Dispenser MOD - wider/slanted top entry section

After using this (excellent!!) Nespresso capsule dispenser for months and loving it, I found myself wishing a slightly different “entry point” for the sleeves at the top of the dispenser.: When opening the sleeves, there's usually 2 small…

Wydruk około 3,89 €–4,76 € nettoWstępna wycena jednego wariantu

Pobrania
54
Polubienia
6
Ocena
5
P
PrintablesGwen28

Dessous de verre

Dessous de verre design engrenages

Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu

Pobrania
47
Polubienia
3
Ocena
0
P

Accessories - Box(es), extensions and more for electronics CG Scale / Zubehör - Gehäuse, Verlängerung und mehr für Schwerpunktwaage

Accessory parts for noticeably big, variable CG Scale. All the way from a F3x glider to anything like a 25kg warbird or jet! Additions and some remixes of the original CG scale parts from here ……

Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu

Pobrania
46
Polubienia
12
Ocena
0
P
PrintablesMarin

Singer Style Accessory Box

Update: added Singer Badge, as optional object to print. This one is replacement for Singer letters. The badge is easier to glue onto the Box lid. I have quite a lot of Singer accessories for all my sewing machines. This is a replacement…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu

Pobrania
45
Polubienia
10
Ocena
0
P
Printablesfluetke

Gridfinity cradle for Xiaomi Air-Compressor

This is a gridfinity-compatible cradle for the Xiaomi Aircompressor (only version 1 unfortunately), so you can store your compressor along with all your other gridfinitized bike tools. Dimensions: 5x2x2

Wydruk około 4,74 €–5,80 € nettoWstępna wycena jednego wariantu

Pobrania
44
Polubienia
11
Ocena
5
P
Printablesargoroots

Label printer accessory box

Box to store label printer (Brother P-Touch) cartridges and power brick.

Wydruk około 5,94 €–7,26 € nettoWstępna wycena jednego wariantu

Pobrania
43
Polubienia
10
Ocena
5
P
PrintablesRudi

Bunchems Smile Mouth – Snap-Fit 3D Printable Accessory

This is a 3D-printable smile mouth , designed specifically to fit Bunchems (the small spiky balls that stick together). The mouth features a simple snap-fit design that presses gently into Bunchems without glue , making it reusable and…

Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu

Pobrania
42
Polubienia
2
Ocena
0
P
PrintablesMene

1Zpresso Q2 coffee grinder bean hopper lid

This is a replacement for the semi-clear plastic lid that is attached to the q2 handle. I measured the old part, created the model in OpenSCAD and printed it. It fits perfectly. While this is a very easy design, I am it sharing in case…

Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
36
Polubienia
1
Ocena
0
P
Printablesetarina

Nespresso Original Water Reservoir Cover

My first project! I received a hand-me-down Nespresso Original machine that was missing the water reservoir cover, so I decided to make a replacement. I've tweaked it so that it fits snugly, but still has air channels to keep the machine…

Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu

Pobrania
35
Polubienia
3
Ocena
0
P
PrintablesJOATZ

2x8 Gridfinity Pinecil and Solidering Accessories Holder

Gridfinity setup 2x8. Holds a Pinecil, 6 tips, and soldiering accessories from this kit specifically: https://www.amazon.com/dp/B0BJ9FDS5F?psc=1&ref=ppx_yo2ov_dt_b_product_details

Wydruk około 8,50 €–10,39 € nettoWstępna wycena jednego wariantu

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesAdam

Tinkertoy Sphere Game (Montessori-style)

This is a new way to play with a Tinkertoy Construction Set . It's a half-dome full of slots to accommodate the wooden rods. If you don't have any Tinkertoy rods, you can get a full set of replacement models here:…

Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu

Pobrania
34
Polubienia
17
Ocena
0
P
PrintablesLustyNarwhal

Prusa XL Tool and Accessory Trays

This is a two-piece tray system for the Prusa XL, designed to work with the OEM enclosure. I printed it in PLA with 15% infill. I understand the tools people use may vary person-to-person, but hopefully it works for someone.

Wydruk około 8,69 €–10,63 € nettoWstępna wycena jednego wariantu

Pobrania
33
Polubienia
14
Ocena
0
P
PrintablesRyan Millar

Resistance Band Accessory Hangers

Awesome looking hangers for your Resistance Band Accessories! Each hanger design comes in pieces for super easy (zero supports) printing. Design include hangers for handles, ankle straps and bicep ropes. The hangers in the photos were…

Wydruk około 4,71 €–5,75 € nettoWstępna wycena jednego wariantu

Pobrania
31
Polubienia
14
Ocena
0
P
Printablesargoroots

Box for Soldering Iron TS80P and accessories

Glue required. Also some magnets to better hold cover, but not 100% needed.

Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu

Pobrania
30
Polubienia
9
Ocena
0
P
PrintablesMaxasRena

Inlets for Bosch Professional Accessories box

I used the Bosch Professional Accessories 2608522363 box for around 8€. https://www.amazon.de/gp/product/B01N23C3ON/ I got a few of those boxes to organise the stuff for my mobile tools. I will add more trays as I design and test them.…

Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
30
Polubienia
7
Ocena
0
P
PrintablesLuis

Espresso portafilter paper filter holder

This holder for portafilter filters holds filters up to a diameter of 52 mm, such as those used in DeLonghi machines. The holder can be printed from PLA without supports. *** german version *** Dieser Halter für Siebträger Filter fasst…

Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
3
Ocena
0
P
Printablesro3dguyz

Espresso Cup hanger for 4 cups.

Model to hang 4 espresso cups. Has 3 counter sunk holes for screws.

Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesRyanR

Espresso funnel and dosing cup

I don't have an espresso maker, but my brother asked me to make this, and apparently it works great for him. Funnel modeled after this product . Also made a little weighing cup with a tapered lip that perfectly fits this funnel.

Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
3
Ocena
0
P
Printablestsbrownie

Panasonic Lumix GX-8 Camera Battery Door Accessory Cover (Ver 2.0)

This is a replacement cover for the Panasonic Lumix GX-8 battery door accessory opening. It is placed INSIDE the door. It's not water proof, but it will help seal out dust. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…

Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesJacques Lopez

Levoit LVAC-200 Accessories Wall Mount

This is a wall-mounted holder for the two original accessories that come with the Levoit LVAC-200 cordless vacuum cleaner . The mount keeps both accessories neatly organized and easily accessible, instead of lying around or taking space…

Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesKevin Müller

Dyson accessories adapter

Dyson accessories adapter for vacuum cleaners on Severin vacuum cleaners

Wydruk około 3,08 €–3,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesRudi

Bunchems Pig Nose – Snap-Fit 3D Printable Accessory

This is a 3D-printable pig nose , designed specifically to fit Bunchems (the small spiky balls that stick together). The nose features a simple snap-fit design that presses gently into Bunchems without glue , making it reusable and easy…

Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
2
Ocena
5
P
Printablesfluetke

Wall Mount for VanMoof S2 E-Bike Charger with Xiaomi Aircompressor Holder

This model is a practical remix of a wall mount designed for the VanMoof S2 E-Bike charger. The wall mount has been extended with an additional holder for the Xiaomi Aircompressor, ensuring that you always have the essential tools for…

Wydruk około 9,51 €–11,63 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
4
Ocena
0
P
PrintablesFran Lapenna

Box for handgun cleaning accessories and others!

Box for handgun cleaning accessories and others!

Wydruk około 13,31 €–16,27 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesSJM

Shoei vertical Mount for GoPro Adapter Helmet Gen 3 (Neotec 3, GT-Air 3, J-Cruise 3) for right side Helmet Accessories Connector (2 of 3)

Shoei Gen3 GoPro vertical Clip-Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3…

Wydruk około 1,32 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesHamar József

standing Nespresso caffee capsule holder 2 line

standing Nespresso caffee capsule holder 2 line with cut out for easier use.

Wydruk około 8,70 €–10,63 € nettoWstępna wycena jednego wariantu

Pobrania
17
Polubienia
4
Ocena
0
P
Printablesenfance

Minion Style CMF Phone 2 Pro Cover with Stand and compatible with MagSafe accessories

Stuart from Minions is joining the Nothing family! Inspired by Stuart in black suit . Note: This model was printed with 0.6 nozzle, which is the only one I have, but it should also work with 0.4 nozzle. I had access to grey PETG, yellow…

Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesLibary

Blåhaj - Acccessory Pack

Simple to print cute Blåhaj accessories for different occasions and functions! Be it accessories for your outfit or to use in your home. All of these can be printed with no supports and with varying layer heights. Only thing needed are a…

Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
3
Ocena
0
P
PrintablesEdison82

IKEA PAX Mouse Holder – Stylish and Practical Accessory Storage

IKEA PAX Mouse Holder – Stylish and Practical Accessory Storage Keep your workspace clean and organized with this custom-designed mouse holder, perfectly compatible with the IKEA PAX wardrobe system! This holder allows you to neatly hang…

Wydruk około 2,92 €–3,57 € nettoWstępna wycena jednego wariantu

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesRudi

Bunchems Narrow Eyes – Snap-Fit 3D Printable Accessory

These are 3D-printable narrow eyes , designed specifically to fit Bunchems (the small spiky balls that stick together). The eyes have a simple, round and narrow design , intended as a clean and minimal alternative to larger eye models.…

Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesChristophe D FR

accessoire vélo rockrider ST 100 support sur cadre

accessoire de vélo pour rockrider ST 100 : support pinçant le cadre pour accrocher un talkie-walkie, la pièce est au dimension du cadre avec très peu de jeu, on peut ajouter un peu de scotch plastifié à l'intérieur pour éviter qu'il…

Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesMitsuMira

Espresso Cup Shaping Set (Cylinder Mold + Base and Strip Cutters)

A three-part set for hand-building small espresso cups from rolled clay. How it works: Roll a sheet of clay to approximately 7 mm thickness. Use the strip cutter to cut the rectangular strip that forms the side of the cup. Use the base…

Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesMaxmilián Koch

Double Adhesive Hook for Refrigerator, Cabinet & Kitchen Accessories

Simple adhesive-mounted double hook designed for the top edge of a refrigerator, cabinet, shelf, or radiator. Ideal for hanging kitchen towels, oven mitts, dishcloths, and other lightweight accessories. The hook is attached using…

Wydruk około 3,21 €–3,93 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
4
Ocena
0
P
PrintablesRudi

Bunchems Horns – Snap-Fit 3D Printable Accessory

These are 3D-printable horns , designed specifically to fit Bunchems (the small spiky balls that stick together). The horns feature a simple snap-fit design that presses gently into Bunchems without glue , making them reusable and easy to…

Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesHamar József

Wydruk około 18,48 €–22,58 € nettoWstępna wycena jednego wariantu

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesC3DPR

40x40 Fan filter accessory with cable outlet

Print settings: ------------- Temperature:200.C Bed Temperature:50.C Print Speed:125mm/S Support:ON Infill:80% Infill Pattern:Cube

Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesMa77hew

PJ2+ accessories

the cover for the power knob is modeled as separate bodies so it can be used on an mmu. the gcode for it uses .2mm layers, and all petg settings which will also print ninjaflex which is the what i used on the bottom of the cap to lightly…

Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
8
Polubienia
0
Ocena
0
P
Printablesshaakunthala

Lightweight bike acessory handlebar mount ⌀ 22 mm PETG

I bought a stylus to enter directions on my phone while biking with gloves on. This is mostly useful in the winter. I didn’t like the original double-sided tape mount, so I designed a simple 3D-printed handlebar mount instead. It snaps…

Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesRudi

Compressor foot for Cotech 40-8310

Replacement foot for small compressor. Cotech 40-8310, but will probably also fit other similar compressors. Printed with PETG 0.20mm Brim

Wydruk około 0,36 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesKarolis

SYNCROS accessories mounting bracket for PRO saddles

Bracket to use Syncros accessories with PRO saddles. Every Syncros accessory mounts perfectly and holds strong. Originally it was designed for PRO Stealth saddle, but should fit every other PRO saddle. Printing settings: Filament: PETG,…

Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
6
Polubienia
2
Ocena
0

dessous de vase

dessous de vase de 170mm de diamètre avec un rebord de 7mm

Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesKhrys3D

Vape hang/multi Support Vaporesso ( resizable for most pods) NO supports

I have designed this Vape Bed support with USB hole for my wife. It is compatible with Vaporesso Xross2 but i think can be optimized for most POD VAPES, because the base is detachable and dimensions are pretty editable for your needs…

Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesBuild Forge

Diglett (quest) 3d printing accessories holder

Diglett from pokemon quest I spray painted the nose and base and printed the singlet and the white and black parts each color separate in file other then those spray painted.

Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesMarcus_3D

Processor model (TQFP52-1010-0.65)

This is a printable model od processor in TQFP52 case Printing times with structure - 79g : 3h26m = MK4 4h44m = MINI/+ 6h41m = MK3S/+ Printing times without structure 67g : 2h37m = MK4 2h59m = MINI/+ 4h53m = MK3S/+ Version 1: Processor…

Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu

Polubienia
2
Ocena
0
P
Printablessoozafone

Dummy 13 - accessories starter pack

This is a small accessory pack for Dummy 13 ( Version 1.0 / Beta ) These accessories were designed alongside Dummy 13 by the original creator. Consider this a nice starter set before jumping into the hundreds of community remixes! This…

Pobrania
40 862
Polubienia
4986
Ocena
4,95
P
Printablesredfoxdude

Umikot (58mm Version) - Planetary Gear Spirograph Espresso WDT Tool

WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…

Pobrania
25 049
Polubienia
4179
Ocena
4,95