Wyniki wyszukiwania: eth

Ethernet | RJ45 clip to secure/repair/fix broken tab

This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…

Ethernet Port Dust Cap/Cover - No Supports

Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems. Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has…

🗲 Full-Size Mjolnir 3-piece screw together (Thor's Hammer) 🗲

PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…

🗲 Thor's Hammer Mjolnir 2-piece screw together 60% scale 🗲

Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.

Ethernet RJ45 repair fix with NO SUPPORTS

Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…

Ethernet RJ45 Repair

This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports

Pi4B Flat Fan Case Noctua 40x10 5V/3.3V SnapTogether

Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…

Infinity Fidget Cube (Snap-Together, Rugged & Parameterized)

An infinity cube concept with a different approach to the way the connector joints work, using an easy-to-print snap together design. My goal was to design a version that wouldn't have the issue with the unsupported first layer of the…

Ethernet RJ45 repair with snap lock

An ethernet RJ45 repair clip with a working snap lock that locks the plug in the socket. Prints without supports added from the slicer thus it prints quicker and and uses less material. NOTE: Needs to be printed with 3 perimeters (3…

Snap-Together Folding Dodecahedron Frame

This model prints flat, then folds into a dodecahedron frame. The inner sides snap together (as shown in the video below) to hold the shape without any additional connectors. Print in PETG (as PLA is not sturdy enough) at 0.2 mm layer…

Nativity: Star of Bethlehem

Nativity: Star of Bethlehem

Starlink Ethernet Adapter Wall Mount

This wall mount is designed for the Starlink Ethernet Adapter. There is room for the cables to connect into both sides. Optimal design for 3D printing, made to be strong, durable, and reliable. The Starlink Ethernet Adapter fits tightly…

Snap-lock Pin for Gridfinity Screw Together Baseplate

Snap-lock pin for the screw together gridfinity baseplate by Kyle Warren. Itself Based on ZackFreedman design . Kyle himself describes his baseplate as “overkill”, and while I love the model, I don't quite need the rigidity of screws; I…

Raspberry Pi 5 Case - Modular Snap Together

Rasperry Pi 5 Case - Modular Snap Together This is a remix of the excellent "Modular Snap Together Raspberry Pi Case" by Sneaks , originally designed for the Raspberry Pi 3B+ and Raspberry Pi 4 . I've updated the design to make it fully…

Chainmail 3D Printed Fabric ( snap together too)

This is a Chainmail/3D printed fabric design that can be printed interlocking or snap together. saw some of the other designs that were really cool but I couldn't figure out how to going them so I leveraged another design I had to make a…

Smartphone and Tablet Stand with Charging Cable Support / Handyhalterung und Tablethalterung mit Ladekabelunterstützung

I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…

Halloween Vampire Teeth

Vampire Teeth – 3D-Printed Halloween Accessory Perfect for your vampire costume: these lightweight, reusable vampire teeth are 3D-printed and, with PLA Glow , deliver a spooky glow-in-the-dark effect. Easy to print, quick to assemble, and…

Enclosure for Waveshare ESP32-S3-ETH OV2640 CAM LAN RJ45 POE

This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…

Cable Organizer with Ethernet Cap

Wanted something like the original design but something to protect Ethernet endcaps. Also made the gap to hold the cable inside the clip better.

Two Piece Thread Together 100g Filament Spool

For over a year now, I've been signed up for Proto-Pasta's Endless Pastabilities which sends three 100g spools of Filaments every couple of months. I absolutely LOVE Proto-Pasta and look forward to getting these unique filament colors…

RJ45 ethernet boot/cap/cover/ works post crimping

Hello! Forgot to add the boot/cap/cover to your RJ-45 cable and you crimped it already? been there, done that. Hope this helps. This is a work in progress (W.I.P.) as it's not the easiest print using FDM printers, yet. Update 2022-09-07…

Snap-Together Folding Rhombic Dodecahedron

This model prints flat, then folds along the edges to form a rhombic dodecahedron. The inner sides snap together, as shown in the video below, to hold the shape without additional connectors. If you change filament mid-print, you will…

Ethernet RJ45 repair with snap lock for sideways print

An ethernet RJ45 repair clip with a snap lock that locks the plug in the socket. This model is optimized for sideways print so that the snap lock prints with the layer lines to increase the strength. Use: 3 perimeters (walls) supports To…

Ethernet Port Cover - Print Orientation & Hex Remix

Remixed the ethernet port cover to print in an orientation that makes it far less likely to break off within the port. This orientation also increases the part surface on the build plate - reducing the need for brims. Finally, I changed…

Printable Mobius Strip - Clicks together

Inspired by Teaching Tech's bendable prints, I created this mobius strip. The dimensions are not from his design, so it's actually completely made by me. There is a clip at each end, so after printing you can bend and click the strip…

teethBrushed - toothBrush holder

teethBrushed The clean, edged curves give your bathroom a new and fresh expression. Perfect for the entire family. Daily teeth cleaning can be complete with our integrated floss stick section. Sometimes the smallest changes can make a big…

Dethleffs Haken

Ich habe diesen Haken als erstes Projekt in Fusion erstellt und mir das Original von Dethleffs zum Vorbild genommen. Er ist keine 1:1-Kopie aber dicht dran und doch so weit weg, dass ich das Copyright von Dethleffs nicht verletzt habe.…

Two Sided Crypto Keychain s BTC ETH BNB XRP DOGE LTC

Two Sided Crypto Keychains BTC - Bitcoin ETH - Ethereum BNB - Binance XRP - Ripple DOGE - Doge Coin LTC - Litecoin + some Bonus Glass Stands ;) How to use Layer Change to make colored Keychains / Prints in PrusaSlicer How to ADD any Text…

Promethean Air Cleaner for FDM and MSLA (resin)

Highlights: MERV 13 filter maintains a good airflow rate while capturing the majority of particulates. HEPA 13 is available for extraction applications. Reusable cartridge uses low-dust coconut-shell activated carbon. Can be used as a…

Ethernet cable wall guide

Remix of https://www.printables.com/model/321603-ethernet-cable-wall-mount

Flower pot / planter or bowl for something

Simple but nice flower planter or bowl. For flower planter use min 3 layers (best is 100% infill). I printed i vase mode too, and it is OK like bowl. I used Prusament Galaxy Black PETG for vase mode and rainbow STX PLA for normal mode.

Rock-Hewn Churches Lalibela Ethiopia

In a mountainous region in the heart of Ethiopia, some 645 km from Addis Ababa, eleven medieval monolithic churches were carved out of rock. Their building is attributed to King Lalibela who set out to construct in the 12th century a ‘New…

The Shaka sign a 1000 pieces puzzle of "friendship, understanding, compassion", and solidarity among the various ethnic cultures" (Shaka sign)

Residents of Hawaii use the Shaka to convey the "Aloha Spirit", a concept of friendship, understanding, compassion, and solidarity among the various ethnic cultures that reside in Hawaii, lacking a direct semantic to literal translation.…

MMU2s Idler 20 teeth Pulley Fit GT2-6mm

HI! print this idler / selector with different material, but it's a waste every time; so i came with this simple design combine the 20t 6mm gt pulley with the tensioner to make it more solid, hope it can make the process less complicated…

Ethernet Cable Comb (Cat5e)

After lots of versions, I think I have made a nice cable dresser. Designed for Cat 5, may need to be slightly scaled up for Cat 6 and beyond. Directions (if you really need them) Print two at a high infill for strength. Put them together…

Ethernet Cable Lock for PCs

This lock allows one to lock ethernet cables into recessed ethernet sockets, typically found on PC's, as well as routers and switches etc. that normally have sockets flush with their outer casing. For printing, infil can be 30%, no…

Dethleffs Trend 7057 Motorhome Waste Water Key

Waste Water Key for Dethleffs Motorhome Grey Waste, we have glued and put a screw in the tighten it (also put some duck tape on to make sure its tight) at moment its working very well

Hackers Lisbeth Salander and Elliot Alderson

Hackers Lisbeth Salander and Elliot Alderson

Thor's Hammer Mjolnir Apple watch desk charger 2pc screw together

The same excellent two-part screw-together Mjolnir model made by Triple G based on the original work of 80sNerdBomb , this version uses PrusaSlicer to slice the hammer head to sit flat on a desk, and to also take an Apple Watch charging…

Ethernet Cable Light Cover

I sleep in complete darkness and usually tape all things that light up in my room. The Ethernet cable port is harder cover up so made a cover for the lights instead. Photo of Device has duck tape residue.

Air Valve Wrench 6 Teeth

Wrench (key) for air valve on paddle board or other inflatable things.

Jesus Christ of Nazareth

Hello, I have Jesus Christ of Nazareth for you. It is a really poignant masterpiece. Exactly according to the Bible ! :-) It is suitable for display in a prayer room. The printing is not demanding! Good luck with the printing! I used PLA…

Teppichhalter für Golf 4 etc/ Carpetholder for Golf 4 etc

I designed the carpet-holders for many cars of the Volkswagen Audi AG. The original parts are made out of PA6 Nylon. the prototypes in the pictures (see 1&2) are made out of PLA because i just wanted to see how they would fit. I will make…

Clip en couleur pour câble Ethernet

Filament : PLA Nozzle : 0.25mm Layer: 0.15mm Dimension : D8 x d6 x H8 Clip en couleur pour, par exemple, localiser les ports d'un switch connectés sur le même VLan Color clip to, for example, locate the ports of a switch connected to the…

Ethernet Cable Spool 300+ ft Capacity

Great way to easily store your long ethernet cables! *Spool pictured is holding 115 feet of CAT6 ethernet cable. Hardware needed 8x M4x8-10 8x M4 Heatset Insert 4-5mm in length Printing PET-G .2 mm default settings Infill: 15-20 gyroid…

Etherpull

This tiny shield fits over the end of an ethernet cable to transform it temporarily into a thing that can be easily pulled through any obstacle course of cables and equipment. It prevents the small latch from catching on anything, so it…

Kleine Kabelrolle für W - LAN - Ethernet - Kabel, zum aufrollen

Netzwerkkabel lassen sich Platzsparend aufwickeln und aufbewahren. Verlegte Kabel sind oft zu lang und sind schwer irgendwo zu “verstecken”. Mit dieser Kabelrolle lässt sich die überschüssige Kabellänge bequem auf wickeln, mit den…

Stand For Nostromo Flamethrower

Designed this to fit the Nostromo incinerator unit made by HotPretzel : https://www.printables.com/model/30140-nostromo-incinerator-unit-from-alien-1979 The arms should be able to pressure fit into the base, no glue required

Screw-together container for small items

Print with default settings layerheight 0.2 15% infill Inner height of the container is 25 mm and the diameter is 80 mm For a single/top container you should print a lid For the following container(s) you should print a connector All…

Large Light Up Monster Eyes and Teeth

I designed some LED lit eyeballs and teeth to decorate my car trunk for Halloween. I thought folks may want to use them for other projects. I printed the eyeball in white, the pupil in black, and the iris in clear PLA. To make them light…

Philips Sonicare Teethbrush Stand

EN : With reference to my remix of the great model by Wollel I had the idea of reworking this remix for some time, as the plate could benefit from some additional stability in the long term. The competition brought this idea back to my…

Paranthropus Aethiopicus

Paranthropus aethiopicus is an extinct species of robust australopithecine from the Late Pliocene to Early Pleistocene of East Africa about 2.7–2.3 million years ago. However, it is much debated whether or not Paranthropus is an invalid…

Werwölfe vom Düsterwald Sethalter Kartenhalter / Werewolves

Hier das Model zur praktischen Lagerung der einzelnen Karten. Die Karten findet ihr unter Wewölfe vom Düsterwald hier bei Printables. Gedruckt mit Prusa PETG in der Druckeinstellung schnell, alles Standardeinstellungen

Philips Sonicare Teethbrush Stand for 2 Brushheads V1+V2

EN : A request in the comments section prompted me to revisit this idea with two brush attachments. So I modifyed my former model ( see ). Thanks to the user for the reminder. Material : PLA Layers : 0.2 mm Supports : none See also model…

IKEA Method Zangen Halter

Auf der Grundlage ( Grundplatte ) von @Muurph_109447 und seinem IKEA Method Holepattern Organizer 70x45x35 brauchte ich noch einen Halter für meine Zangen.

Magnetholder for Norjews Baby Safety Magnetic Cupboard Lock

A simple magnetholder for opening secured doors and drawers. Just add a tool change / pause at 11mm (or use the provided gcode) to add the magnet. I bought this Magnetic Cupboard Lock (de: Magnetisches Schrankschloss) on Amazon and used…

Headphones/Headsetholder for Ikea Kallax

Universal Headphone Holder for IKEA Kallax This universal headphone holder is designed for easy mounting on an IKEA Kallax shelf—no screws or tools required! All parts are 3D printed and can be assembled using just a 2 Euro coin. The…

Snap together print in place chain mail

Improved version of my earlier design to make in thinner and easier to print.

Coupling for Method hand soap dispenser

It always bothered me that I couldn't get the last bit of soap out of Method hand soap dispensers apart from rinsing out the bottle and washing it all down the drain - this seemed wasteful and unnecessary. Using this coupling, I can now…

Strikethrough MMU3 Label-Plate Modded for MMU printing

I really like this design since I've had all three mmu units. another reason was I wanted an orange label plate since I chose to print my mmu3 in orange like the first one I got years ago. the first one i printed was text up and i feel…

The Shaka sign a 1000 pieces puzzle of "friendship, understanding, compassion", and solidarity among the various ethnic cultures" v2

Residents of Hawaii use the Shaka to convey the "Aloha Spirit", a concept of friendship, understanding, compassion, and solidarity among the various ethnic cultures that reside in Hawaii, lacking a direct semantic to literal translation.…

SD Accessible Bottom for Modular Snap Together Case for Raspberry Pi 2B/3B/3B+

Alternate side mount bottom for Sneaks' modular raspi case. Provides easier access to SD card. Now fits RasPi 2B/3B/3B+

Wall mount for SMAYS Micro USB to ethernet Adapter - OTG hub Adaptor

Wall mount for the very popular SMAYS Micro USB to ethernet Adapter - OTG hub Adaptor https://www.amazon.com/dp/B08D6H7Y85 (not an affiliate link) Can be mounted directly to the wall or optionally with the use of the companion pedestal.…

Case for esp32-eth01 with custom pcb

Case for esp32-eth01 with custom pcb link for custum pcb for esp32-eth01 https://www.huizebruin.nl/product/esp32-eth01-ethernet-pcb-scr-con-01/

Magnet Holder for Airbrush / Magnethalter zum Airbrushen

I bought some small magnets (ø 10 mm, 2 mm height) to secure my airbrush stencils but found that these are so small that my fat fingers can't lift them up with ease. So I made these holders for them and now they are very usable. The…

Liebesherz oder einfach nur so für seinen Schatz. Heart of love just for your sweetheart.

Als Valentinsherz, Liebesherz oder einfach nur so für seinen Schatz.Ich habe es mit PLA und einer Geschwindigkeit von 50 % gedruckt um die Schrift einigermassen Vernünftig aussehen zu lassen.Farbwechsel ab Schrift Anfang ist bereits in…

Halloween Hedge Face - Eyes and bloody Teeth

For our little fir tree we needed a halloween custome! ;-) I used the multicolor functionality of my Prusa XL printer.

Low-Poly Snap-Together Ball

Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. Assembly:

Gear to be used on electric train, optimized for MK4S, sharp teeth, strong

I tried to use https://www.printables.com/model/537121-replacement-gear-for-playtive-electric-trains but this did not work for my application, printing also did not print teeth sharp enough on my MK4S with ASA. So this is new wheel made…

Ethernet Bracket

A simple mount for ethernet adapter. Sized it for UGREEN ethernet extender coupler from amazon. Tips appreciated: https://ko-fi.com/yuggniiks

Fensterdurchführung Ethernet Ersatzgehäuse

Mir hat die Farbe nicht gefallen, deshalb habe ich ein eigenes Gehäuse designt. Einfach das alte Gehäuse abklipsen, neues dranstecken und zusammenkleben. Hier habe ich die Fensterdurchführung bezogen:…

Easy Flamethrower

Easy flamethrower for lighter and a antiperspirant You can use rubber bands to keep the lighter awake Be carefull, its still just plastic material!! Its really dangerous to play with fire, do it only under the supervision of a…

4Runner Small Switch on center - Ethernet RJ45 cable Adapter

I remixed this to fit a GMRS extension RJ45 (CAT5) cable that's routed from the arm rest through the panel...I resized this to fit the smaller port in the bottom, and added two cutouts: pass through for CAT5 Cable for install larger hole…

Dračí zuby / Dragon Teeth Washer - insert

Insert pro stolní hru Dračí zuby. Rozměry: 252 x 252 x 37 mm Tisknul jsem na MK3S+, tryska 0.4 mm, vrstva 0.20 Quality, PLA.…

La Liberty Statue by Magda Nemeth

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Gridfinity Screw Together baseplate

this system is fully compatible with standard grifinity models. Based on ZackFreedman design it screws together using 4-40 socket head cap screws and heat set inserts, with an optional 1/8 dowel pin in the center if you want to be truly…

Reindeer Christmas Card Snap-Together Reindeer

This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…

Snap-Together Marble Maze

A fun little marble maze. No supports required, and assembly is 100% snap-together using ball and socket joints. No hardware or glue required. Requires one marble (not included). Parts base.stl - 1 maze.stl - 1 axle-cam.stl - 2…

Ethereal Kiss Statuette

Overview An ethereal and light statue that shows love in artish style. I found that picture on internet as a tattoo on somebody arm and I had to bring it to the world of 3d printing. I recreated and changed it a bit so that it could be…

Join PTFE Tubes Together Magnetically!

This coupler allows you to join two ends of PTFE tubing together with magnets! This will be useful if you want to have an airtight connection between two PTFE tubes but still want to be able to pull/push the filament inside sometimes. I'm…

Top tether hook

Add a practical hanging point to the back of the seat and make better use of the luggage compartment. This 3D-printable fold-out hook provides a convenient place to hang lightweight everyday items such as shopping bags, small accessories…

Big Ben (Elizabeth Tower) - London , UK

🇬🇧 Welcome to London! This model was created by Dany Sánchez . The most famous landmark of London and the United Kingdom: the Big Ben . The tower is officially known as Elizabeth Tower, although the nickname Big Ben, which is the main…

Yeethammer

Update 2025-02-17 Added Breech - Lifter Nut v2.stl , Breech - Lifter Bolt v2.stl , and Breech - Lifter Pin [x2].stl These replace the old Breech lifter parts, should fix issues with the nubs shearing. Insert the pins into the lifter parts…

Ethernet (RJ45) Cover/Plug/Cap

Ethernet (RJ45) Port Dust Cover cap with grip for easy removal. Just added: New slimmer/narrow model for switches with closely spaced ports. Check out all other port covers: USB-A port cover -…

Dragon Teeth Dice Set

For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ This is a full dice set for your tabletop games and roleplaying! All of the dice and the jawbone are printed flat…

planetary gear fidget thing with three-teeth-planets

Who hasn't seen a print-in-place herringbone planetary gear… probably a version from Emmett . However I recently developed a different method for those gears which allows planet gears with only 3 teeth (actually also with 2 teeth, but…

Screw Together Egg with Money Holder (Similar to the "Impossible" models)

Here is a fun Easter related model. The two pieces screw together to form an egg. There are two versions of the inner piece, one with a hole in the center to hide money and one without. The mode is similar to the popular “impossible”…

Doctor Pen Holder / Desk Organizer - Lab Coat & Stethoscope - Easy Print Gift

Looking for the perfect gift for a doctor, nurse, or medical student? This pen holder, shaped like a doctor's bust complete with a lab coat and stethoscope, is the ideal desk accessory to add a touch of professionalism and charm to any…

RJ45 Ethernet Cable Clip Repair

These are replacement clips to fix broken ethernet cable clips. The clips attach to the Ethernet cable and replace the broken clip so that the cable stays locked into an Ethernet port. EDIT - For some reason Simplify3d doesn't like this…

Autodarts Dart Camera Setup V3 / USER MANUAL / Darts (joint plug-in method)

My Website This is my custom-designed Dart camera setup with an integrated light ring. I printed the whole setup on a Bambu Lab A1. The problem with other setups is that I hit the camera on top when trying to throw a double 20. User…

RJ45 Ethernet Cable Connector Repair

This design is a unique combination of the short designs, where the latch is fixed at the connector and the longer designs, where the clip is mounted to the cable behind the collet. The design considers the exact dimensions of the collet…

Dental Model - upper and lower teeth set

remodeled teeth inspired by medical scans and moldings made my dentists - Upper and lower part fit into each other like real teeth but each can stand on their own. Size should be accurate to that of an adult. If u import the file into…

X-303 Prometheus

This is my model of the Prometheus from the Stargate SG1. Once again the model is done completely by me, it is a kit where you should not need any glue (except for repair maybe). The assembly is much simpler then the 304, but still, I…

Mini teeth box

Mini box for the first fallen teeth Other similar models are in the Dental collection : https://www.printables.com/cs/social/218199-thorin-oakenshield/collections/128338

Big Ben (Elizabeth Tower) Multi-part Lamp

🇬🇧 Welcome to London! 👑🟣 On the Occasion of HM Queen Elizabeth II's Platinum Jubilee , we remixed our own Big Ben model to be printable at larger scales, in full color even without MMU, and with the possibility to add lights or a real…

SRAM CHAIN GAP ADJUSTMENT TOOL 52 TEETH 12 SPEED

I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.

The Teeth of Terra by Cornivius - Multipart Chainsword Prop REMIX

Here it is! The remixed Teeth of Terra by Cornivius. I've done my best to make this into a multipart kit that's easy to print and assemble. Glue is optional for everything but the pipe, all other parts go together with Openlock clips -…

Death Star Screw Together

I like to print things that don't need glued together, so I remixed the original model to be screwed together instead.

Parametric Cable Label / Tag holder for Ethernet, network, USB, PC, power line cables, etc.

This is my attempt for a universal cable labeling system. The label holder consists of a main part and a snapable cover. Labels can be stuck to the main part's flat surface or inserted into the cover if they are not sticky. Thus, using…