224 modeli
As I've collected more records I've struggled with them leaning against each other while they are stored in my Ikea Expedit. This is a simple divider which splits a cube into four even sections. It's easily attached to the underside of…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
I needed a book riser for my kallax which was not as tall. So I shortened it to about 9 cm. During that process I removed the grid and replaced it with crossing structural beams. Recommended print settings: .28mm layers and 10% infill
Wydruk około 7,74 €–9,46 € nettoWstępna wycena jednego wariantu
Accessories for the VW T3 camper model. (Universal trailer model for future projects) used screws: M3x20mm (12x) red M3x6mm (3x) blue Keep the orientation of the parts as original STL file. Printer setup: Nozzle diameter 0,4 10% infill…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a digital 3D printable model of Gustave’s gun from Clair Obscur: Expedition 33 . Designed for easy 3D printing in three main parts , it features a realistic texture that matches perfectly with the rest of our Expedition 33 cosplay…
Wydruk około 16,16 €–19,75 € nettoWstępna wycena jednego wariantu
Hello, I have for you a Military crate for RC car expedition 1:10, 1:12 I used PLA/PETG Basic as the material No need to use support If you are interested in my work, the links are here: https://www.instagram.com/ainon3dprint/…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena jednego wariantu
Hello, I have Traction pads for RC car Expedition 1:10, 1:12 RMT T98 Land Rover Defender. They are 220x30mm. I used PLA/PETG Basic as material You need to use supports If you are interested in my work, the links are here:…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
Insert mirrors into your kallax or expedit shelves using these brackets. 4 different spacings of the bracket are available. 0.1, 0.2, 0.3 and 0.4mm With perfect print tolerances and perfectly leveled shelve, you can use four of the 0.2mm…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
Base support for antenna mast to prevent slipping when guy wires are used. It also has a groove for guiding the antenna wire inside the mast. Filament used is PETG. Used 4 perimeters, 5 solid layers for top and bottom, 15% Gyroid infill.…
Wydruk około 3,94 €–4,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Alicia's mask (latest version is Rev4), I revised it a bit to bring the cheeks in and modified the lips a little. Since then, extra details have been added (Big thanks to Zlatri for sending me a nice reference shot of the masks side) . It…
Finally finished my insert for Lost Ruins of Arnak by CGE, plus BOTH expansions. It was a tight fit - might be too tight for some boxes, and there are a couple of bits I'd have liked to do better (the deck boxes were a real compromise in…
I wanted to add shelves to my Ikea Kallax, after a lot of looking I designed these. These are two types of pieces. Front/Center (FC) and Back. For each box/cube you need to print 8 FC and 4 Back pieces. Once you get an idea, you can…
This is an insert / organizer for Terraforming Mars: Ares Expedition, along with the Discovery, Foundations, and Crisis expansions, in the larger Kickstarter expansion box (note: this does not fit in the retail box). It has no lid lift,…
This is an insert for Terraforming Mars: Ares Expedition. I designed it to fit the Kickstarter version, with dual-layered player boards and the promo cards. I designed the main card tray with a ramp at one end so it will hold all the…
Made from PLA. Dimensions 79,6x47,4x30 Print instructions Category: R/C Vehicles Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Resolution: 0,2 Infill: 20 Filament: Prusament PLA Silver
Made from PLA. Dimensions 79,6x49,4x30.5
I like my records to have a clean look from the front across all of the bins. I also like to prevent my records from sliding out of the back. Over the years, I tried a bunch of different hacks to make this happen, but once I figured out…
The Ford Expedition has had issues with the cupholder breaking at the bottom and falling into the center console. This makes the cupholder unusable and even some of the fixes online are only temporary. This model firmly slides into that…
These are a few individual pieces for the box for Expeditions designed to improve the storage of some of the components and make setup faster. The coins and worker/map trays replace the original removable insert and add separate sections…
Hello, I have for you a Minimalist Beer Crate for RC car expedition 1:10, 1:12. The part is a crate for 20 and 12 beers, including beers. I used PLA/PETG Basic as the material No need to use supports If you are interested in my work, the…
Clea's Hair needs to be sculpted from air dry clay, foam clay, or thermoplastic beads. I do not have the artistic skills to do this in Fusion360. “Clea and Francois are best friends, she would never leave him.” - Esquie The better rock!
After the Fracture split Lumière from the rest of the world, an enormous monolith with the glowing number "100" on it appeared on the northern end of the Continent. The year this event took place is retroactively known as "Monolith Year…
Here’s a little something for fellow Expedition 33 fans. A digital 3D-printable Glowing Monolith Book Nook . Think of it as a tiny slice of the expedition tucked quietly between your books, humming with that familiar yellow shimmer.…
This is a redesign of the tracker made by phototon on thingiverse. This one makes it easy to change colors so the symbols stand out, and unifies the design. Happy Gaming! __________________________________ Take a look at all my designs…
I wanted to install these glass shelves in my Ikea Expedit shelf, but did not want to drill holes in my shelf for the mounting hardware. https://www.ikea.com/us/en/p/kallax-glass-shelf-70423765/ Print Settings Printer Brand: Creality…
Hello, I have for you a Trailer, carriage for RC car expedition terrain jeep 1:10, 1:12. The trailer is made in scale 1:10 or 1:12, but you can use it for anything. It has 2 axles for better stability. The model needs to be disassembled…
Clair Obscure Expedition 33 Monolith Music Box Replica from the monolith set. Finally perfected the print profile for the .2 nozzle print. The other 3mfs worked but were more sensitive and prone to failure. Fall off the bone supports.…
Esquie bust to be printed in parts. This design includes the following STLs: -Body -Head -Left/Right ear -Base Printing parameters below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :)…
Canister holder with spacer for second canister For assembly you will need: Nut M6 4 pcs Washer Grover M6 4 pcs Screw M6x30 DIN 912 (ISO 4762) 2 pcs Screw M6x50 DIN 912 (ISO 4762) 2 pcs Nut M10 ISO 4032 4 pcs Washer Grover M10 2 pcs Screw…
Badge for arm of Clair Obscur : Expedition 33 Printed all black then painted gold, the holes are perfect for any kind of string. I scaled it up to 10cm vertical but you can adapt it to your arm and as you wish.
Smal canister, malí kanystr o obsahu 10L. Velikost 47x35x10mm. Oválné díry jsou uzpůsobeny na šroub M3. Jedná se o velikost 1/10 reálného “expedičního” kanystru.
Its the shelf for “Ikea Expedit / Kallax Shelf System” made by aliabuzoha https://www.printables.com/model/221483-ikea-expedit-kallax-shelf-system Its the shelf but 3d printed. its 4mm thick, might ad 8mm thick one soon
This is an extensive remix/modification of sl4ppy's Terraforming Mars playerboard overlay. Size has been increased by a few mm to fit the larger playerboards that are apparently shipping from Target now (Version I have). Also adjusted…
Reworking the model for greater detail and printing on a small printer
This extension tube goes under the front seat of an F-150, F-250, F-350, or Ford Expedition. This extends the vent further to the rear seat for better airflow.
A fabric paint stamp and crest badge for those looking to upgrade their cosplays! Sciel and Gustave have this printed on their jackets. Verso's is a physical badge and has space for a flat-back pin to be glued.
Model designed to fit securely into the front center console drink holders in a 2018 and newer Ford Expedition. It also works with newer F150 models, just not as perfectly. The model will accommodate most one-quart water bottles and…
This is my insert for the (German) collectors/retail edition (small box) of Terraforming Mars: Ares Expedition that can hold all three expansions (as well as the promo cards). The insert does not support sleeves but it can hold the 6…
as a request I modeled Monocos mask From Expedition 33 with the intent for using it as a wall decor but if needed it could be used for cosplay as well. as it stands the model is 775mm tall but the whole model can be scaled down to around…
Gustave figure from Clair Obscur: Expedition 33, with highly detailed mechanical arm, backpack, lumina converter, and distinctive insignias with a strong focus on accuracy. The model is split into multiple parts to ensure clean printing…
This inserts puts all the content from the base game as well as all the expansions and fits it well into the expansions box. I'm having all my cards inside Dragon Shield sleeves and all fits perfectly even with some spare space for future…
Hang Your Headphones to the side of IKEA Kallax shelf. No screws needed - slide on mounting! Useful hanger for cable beneath. Printing larger version is recommended for more universal use. Print instructions Support: NO, Infill: 30%
I didn't really need a coin tray in my car, so I designed this plate to attach a phone mount. I used this adhesive magnetic phone mount. AMAZON LINK The coin tray will easily pop out using pliers or plastic tool. I included a hole in the…
Update: Per a suggestion, I have recessed the numbers. I am constantly bumping my mech mat and moving the guile and power tokens, not knowing where to put them back. I made this, so that no mistakes can be made. It sits nicely next to…
A prop of Gustave's mechanical arm. It is assembled with superglue and has lines and grooves that facilitate easy painting, I consider myself a very bad prop painter, but with some clear coat, acrylic markers and some patina grease ( you…
This is a simple insert for The Lost Expedition that holds the GeekUp Bits from the Boardgamegeek store and multiple expansions. It features three trays. One holds the card decks unsleeved, including the base game, the Fountain of Youth…
1:10 scale expedition canister 21L rozměry 43,8*34,5*18,9mm. Díra na přidělání veskrz 3.2mm .
After using this for sometime, I have added a hole to the side and screwed it place with a wood screw . Updated Increase the walls of the shaft to increase strength. Redone the tapering to print better Settings Supports under the crossed…
Description: (Introduction - The Problem) Is the gear shifter in your Ford F-150, Expedition, or Lincoln Navigator feeling loose, sloppy, or missing that satisfying "click" when you move it between gears (Park, Reverse, Drive, etc.)? Did…
These are some things that I designed for the boardgame Expeditions. They are meant to support setup, playing and storing the game. Here's what you need to print: 5x Tiles - These are hex tiles to fill the empty spaces between the game…
Ford Expedition Max, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
Made a figure from the best game of 2025, I just had red feathers lying around from amazon for the hair but im sure you could use a bunch of different things. The base was made smaller and body was thickened out a bit compared to the…
A hinged door for Ikeas Expedit. Needs M3 screws min 50mm as pin.
Medium canister, střední kanystr o obsahu 20L. Velikost 87x33x8mm. Oválné díry jsou uzpůsobeny na šroub M3. Jedná se o velikost 1/10 reálného “expedičního” kanystru.
Hello. For quite some time I liked the cab frame of TRX4 Sport. When I got my K10 I played with idea to recreate something like that. And this is the first outcome. It got mounting positions for stock Trx Defender fueltanks + holders for…
This is an insert for Terraforming Mars: Ares Expedition. It can hold a base game and two expansions (Discovery, Foundations) and 2 packs of promo cards. This insert will not fit Crisis Expansion. I don't have it yet and I think the box…
I recently played Clair Obscur: Expedition 33 and loved it. Decided to make Gustave's Lumina Converter as a lamp that uses PN532 to sense Nevrons with RFID tags to toggle different lighting effects. So it's just like in the game - the…
thing mount a Skadis board next to my Ikea 4x4 Expedit shelf without drilling a hole into it
My 2014 F-150's shifter started to deteriorate, which led me to look for a new shifter since you can't buy the belt cover by itself. I naively bought a shifter from a 2015-2017 Lincoln Navigator (Ford FL7Z-7D443-AA Bezel) assuming it…
Allows the use of Kallax glass shelves without needing to drill or screw into the shelf. It's also useful for sliding the glass in and out to remove things from the back. I remixed this to fit taller 40k models such as Knights and Flyers…
I sliced this in Prusaslicer and added a few modifiers that you might find useful. The main one is that I printed the base with external perimeters first. That's everything below the layer that the tentacles start on. I credit this for…
I have not printed it yet. Category: Toy & Game Accessories
Ford Expedition Phone Stand A little stand that holds your phone on the wireless charger in the front compartment for a Ford Expedition 2019. The wireless charger is at an angle causing the phone to slide off the charger. This is a ledge…
The model by KJames was a good baseline but it didn't fit snuggly on my vehicle allowing a lot of front to back wobble. With the leverage of a big bottle in it, that becomes a problem. It also didn't fit my Thermalflask bottles with the…
had a problem with dust on my expedition shelf, and didn't like to screw or glue hinges and magnets inside. So I design this stand+holder for a 3mm Plexiglas to be used as door. I've used Plexiglas with dimensions of 33x33cm with a…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Chainsaw 1:10 and 1:12 for the RC car Expedition. The chainsaw is completely authentic and must not be missing in the equipment of any RC jeep Expedition. It…
My attempt to create a WWI British Expeditionary Commander. You may need to resize the model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it…
Needed something to store two vehicules in one Kallax/Expedit shelve. Hardware required : 12x12x1 (mm) metal tubing cut to fit (235mm was ok for the XV01 and V100 but a bit narrow for the BBX and Scorpion) 4 m3 screw Print one master…
🔒 Personal Use Only This model is free for personal use only and may not be sold, shared, or remixed in any form. 🛒 Want to sell physical prints of this model? Join the Commercial License Tier on Patreon.com/Foorbits to get legal rights…
This is already mirrored. Print it, glue on the stamp handle, and stamp using gold fabric paint onto a black rectangle (5cmx8cm).
Smaller version to fit into the box horizontally and to use lesser material.
This is a tray for the worker meeples in the board game Expeditions. It fits on top of the tiles, and makes more room for the coins in the existing tray
This is a top and bottom plate for a DX Command Expedition Mast. They are intended to make field deployment of an antenna using this mast a bit easier. This should be printed in ASA or at the very least ABS. Carbon fiber PET or PC should…
A simple bumper for keeping your records even in a Kallax/Expedit shelf without them falling out the back. Everything is mechanically the same as the original. Print one of each model to make a whole bumper. Join the two halves with short…
Print face down. Add color changes at your preference. Avoid supports on the logo face if possible
A small box with sliding lid, sized to fit in the Expeditions box above the clear plastic lid. The boxes will just about hold everything each player needs - mech base ring, Power and Guile tokens, the stars and the action cube. For the…
Ford Expedition Overhead Console Hinge This is a replacement hinge for the sunglasses holder or conversation mirror in the overhead console of a 2007–2014 Ford Expedition . Print Settings: Supports: Tree Infill: Any (100% preferred)…
Recessed player board overlay to keep your resource cubes in place! Updated 6/25/2021 to have rails along the 2 sides and top and friction fits my player boards perfectly. (the .svg is just an spline export from 3D, so I make no promises…
My contribution for an Insert/Organizer for Expedition to Newdale. As for other inserts I create I aim for the following (in priority order): * Enhance setup and tear-down part * No need for covers of boxes but designed for horizontal and…
Ramp for project cards for Terraforming mars Ares expedition. You can store this ramp in box and will fit all cards from base game and future expansions. Pictures are from 1.0 version.
Works on the Babytrend Expedition Wagon. Made it to hold a bike on the front if a kid gets tired of riding it. Print with supports for the arches. Infill: 25%+ Layer Height: Works fine with 0.3mm
The planet fits tight in the stand upcale it 2-3% to make it more looes.
Model of an IKEA Expedit by jclevet.net . Originally uploaded to Blend Swap .
A table ready board game insert to allow for fast and easy setup of the game. Compatible with the base game and the folowing expansions: Discovery Foundations Crisis Expansion Player’s have pots for their individual components required to…
# Expedition Box – Robuste Transport- & Aufbewahrungsbox im Industrial-Style Bereit für das nächste Abenteuer? 🧭 Ob für die Werkstatt, den Modellbau, Outdoor-Ausrüstung oder einfach als stylische Aufbewahrung – meine selbst konstruierte…
Elevate your Expedition board game experience with this custom 3D printed map tile holders. I'm not sure about you but I get annoyed whenever I flip the tiles during Expedition play. It was inevitable on the table top, and I need to…
This is a removable insert for the front dual cup holder in a 2010 Ford Expedition. My rubber one went missing, so I designed a replacement. Printed with the top plate against the bed, no supports are needed as bridging is suffice. For a…
I print these with PLA. Just unscrew your Kallax and put back the screw with the foot. You can also add a washer.
I really like the corrupted mech idea here: https://www.thingiverse.com/thing:6655016 But I found myself often getting so into the game, that I would forget to move the corrupted mech before my turn. So I created this piece to use in…
You can pick up or place the entire stack of coins at once . The default version includes a handle , which makes it much easier to move the holder around. However, it slightly impairs access to coins, so if you prefer having more space in…
Achtung!! Noch in der Entwicklungsphase. Um die Spulen etwas effizienter aufzubewahren, als sie in den Samla-Boxen von Ikea zu lagern, möchte ich so viele Spulen wie möglich in ein Fach vom Ikea-Kallax-Regal lagern. Bei richtiger…
For reasons known to absolutely no one, Ford removed the hot air exhaust ducting from the air conditioned seats in the 2015-2017 Ford Expedition. The air conditioned seats in the Expedition uses a thermoelectric device (TED) to actively…
Inspired by Macronot's design. I remixed it to fit my needs. Created with TinkerCAD. If I would do it again I would make it 0.1mm or 0.2mm tighter.
Motivation I wanted a nice way to display phase cards in Ares Expedition, so put together a design to show them in a prominent way. The cards are also easy to flip over on the holder, as they protrude slightly over the top to make them…
Print Settings PETG 3 wall loops Gyroid infill pattern Tree support
The watch strap for my Timex fell apart and i needed a new watch strap. I found richmitch watch strap and liked the design. Sadly, it didn't fit my Timex so i decided to make it fit. I had to redesign both ends and i kept the pattern…
Print 100% infill with brim. 2x M2x10 2x M2 nut I recommend lightly gluing the screws so that they don't loosen during the ride and to prevent them from getting lost. Doporučuji šroubky lehce přilepit, aby se během jízdy nemohly uvolnit a…
This is an insert designed to fit the "big box" Kickstarter version of Ares Expedition plus all three expansions (Crisis, Discovery, and Foundations) from Fryx Games. It supports the custom TMAE card sleeves offered during the Kickstarter…
Remix of the spool wall storage of Overture for mounting on an Ikea Kallax / Expedit shelf
Adapter to mount Skadis pegboards to Expedit in horizontal and vertical orientations. 2x M4 nuts required. Just print the files in the orientation, add a pause command at ~14.4mm, insert the nuts into the part and resume the print. (N.B.:…
This corner bumper attaches to any Ikea Kallax or Expedit corner. Requires very minimal support to print. There are two versions included. A regular and a thicker one for your choosing. Thicker one should work fine for most cases. Best…
