1717 modeli
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…
Wydruk około 6,61 €–8,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The video on YouTube says it all: https://youtu.be/uFuYvUkHlpI About the Cap expander (short video): https://www.instagram.com/p/CD083fJD9TJ/ Easy printable even on hobby 3D printer, simple to mount, universal for almost every bike basket…
Wydruk około 2,62 €–3,21 € nettoWstępna wycena jednego wariantu
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Chromecast remote control case / extender
Wydruk około 2,21 €–2,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
print 0.2 layer height of finer tightening the thread will hold the pencil in place assembly see image's, 2 or 3 parts depending on your preference. the end cap slides on the half length and chuck screws on to the threaded portion.
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
I couldn't find a crayon or pencil extender for my kids' crayon scraps. The commercial ones were either too expensive or too difficult for kids to handle. So I designed one myself. Advantages : Easy and fast crayon change. Optimized for…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
🔫 Introducing the Bump Stock Extension for Micro Roni Gen4 by Veracon Engineering! Enhance the stability and control of your Micro Roni Gen4 with our custom-designed Bump Stock Extension. Engineered for precision and compatibility, this…
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
You need one extra M3 Screw + Nut (15-20mm long), one on each side, to complete it. It only works with liftet rear end.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
The second iteration on an assembly made to be attached at the end of a long pole such that a can of fly or bug spray can be operated at range. *Tape pictured is no longer required in the V2 due to the new bolt clasp* Simply attach at the…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
German Die Citroën C4 Modelle ab 2020 enthalten eine Tablet-Halterung . Mit dieser Halterung können aber nur folgende Tablets genutzt werden: Amazon Fire 7"-Tablet, Vexia E1, Vexia E2 Plus, Danew 1013QC, Apple iPad 7th Mit dieser…
Wydruk około 1,70 €–2,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Elgato Light Air comes with desk stands and a knob to attach to it. When using a desk adapter, the light hits on the support and does not allow to tilt enough for proper lighting. This model allows to extend and then tilt the light…
Wydruk około 1,97 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A bit extender compatible with the iFixit Precision Bit Driver. The diameter of the extender shaft is smaller than the one on the driver, allowing for unscrewing of hard to reach screws. Shaft length is resizable in the Fusion source…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Extender for faucet in short spaces. Fit on ½" thread Must print separately and add a seal
Wydruk około 2,41 €–2,95 € nettoWstępna wycena jednego wariantu
This is a simple music stand extender to support single note sheet papers. It grabs on to the music stand using a tightening nut. Printing Tips Easy to print. All parts already oriented for printing without needing supports. I printed all…
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
These are just hole insets of the “whack a mole CATtoy” for preventing the moles from being stuck when they are being pushed too far in. The extenders have cutouts for allowing the arms to go all the way up. For this reason I recommend…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
3 variants available: [wPlate] => Get SSR90 size with rubber butt cover ( Cover from AirsoftPro ) [Nature] => Get SSR90 size without the additional cover, provide bigger space [eone_remix] => Same sizes as enone version, just rounded…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to fit safariland holsters and belt spades. There are three versions depending on your needs. V1 is just a straight piece that will fit on my Prusa Mini diagonally across the plate. V2 has two 25 degree angles and is more useful…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena jednego wariantu
This is a system for extending the height of a Premier One Poultry Fence. The fence pole extender is designed to clip tightly to the pole. Then insert a garden stake (I use 18" green metal-core garden stakes from Ace Hardware). Finally,…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Adils extender 80mm A leg extender created because I couldn't find a 80mm one that would print fast and as simple as possible. In the first photo is the orientation it has to be printed (it has an internal chamfer). I advise using PETG or…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The reach of iFixit bit driver was not sufficient for my use. I created this extender to enable myself to reach to screws. I printed this with the 3 perimeters and 30% cubic infill. I printed it standing with the bit end down. I printed…
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
Clothes hook has been lengthened, as this saves more space when the jacket shoulders are lower underneath each other. This suits my needs better. I hope others will too. Kleiderhaken wurde verlängert, da dadurch mehr Platz eingespart…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Got a new keyboard did not like the height of the legs so i quickly designed some new legs, double the height. i made custom support on the round thing that goes in the keyboard that need to be snipped off with flush cutters or a file.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Mounting hardware for range extender of DualShock 4 controller with universal DS4 zip-tie attachment. The long range capability can be done adding RC joystick module from https://github.com/ctu-vras/rcjoy . System is fully see-through and…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extend ceiling lights to improve looks and resolve hole imperfections. Designed for 4" lights but can be adapted to fit any size with ease. FreeCAD model attached.
Wydruk około 1,96 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by this version for the round baby mobile arm, I decided to make one that fit our square version. Designed in Onshape , feel free to remix. Printed in PLA with supports and low infill which works just fine!
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
I made the extender by sinking the original in to the build plate and then increasing it's size. Next, I took the original and used it as a negative volume to empty out the inside so it can just friction fit on top. I did find that it was…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A coworker's wife wanted to have a wash-basin in her new bathroom just a slightly higher…. The simplest solution turned out to lift the entire cabinet, by extending its legs. And since I've seen this exact type of furniture legs also used…
Wydruk około 12,30 €–15,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement for the Tzumi ionvac 3-in-1 design vacuum extender handle connector clip. When the clip is broken, the connection with extender handle could become loose. Print 0.4mm nozzle, 0.2mm layer height, 3 perimeters, 100%…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is for the Ender Extender 400 AC Powered 600 watt heat pad : I wanted to make sure the AC heat pad was centered as close to perfectly as possible. So I created this simple-to-print guide pin that fits over the build plate screws. Two…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
This is a TV mount for the OREI 4K HDMI over ethernet extender (model UHD-EXB400R-K). Print the model and use double sided tape to attach to your TV. Printed on a PRUSA Mk4S w/ MMU3 in Original Enclosure with Overture PLA. PLA, 0.35mm…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
I made this SpiceShelf Extender to get a bit more room in my spice rack. It holds two small cylindrical jars and fits neatly into my store-bought spice shelf. Dimension of a jar: round about 41mm diameter, 77mm height Motivation: Our…
Wydruk około 2,54 €–3,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
I designed this to fit onto the door of my wifes Cricut maker so the mat doesnt flex when moving in and out. This is designed for the 12x12" mat, but i also have a design for the 12x24" mat also. i printed mine with split colours so its…
all stock hardware. I used pps-cf filament but anything should work
Extension for the USB plug. Specifically designed to fit this 90° cable ( UP -USB 3.0 Male to Female variant, see the picture), but will probably work with other similar cables too ( like this one ). You don't need any additional…
This coffe bean reservoir extender allows you to tiple the amount of coffe beans stored direct in your machine to not run out of coffee beans so fast. It ist designes to fit the original lid and use the grinded openig as well. This…
It's an extender for coat hangers, to hang a coat hanger on a coat hanger to have a coat hanger chain gang of coat hangers. Print instructions Category: Household Supplies Summary It's an extender for coat hangers, to hang a coat hanger…
An extension arm to get a longer reach for the SG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the MG90 servo's
I needed the height of a piece of furniture to be raised so that the power point behind it was still accessible. I printed 4 of these and used them to gain lift of about 36mm. The dimensions of the print are 40mm x 40mm with a 4mm deep…
✏ Back to School with a smart and useful idea! How many times does a pencil become too short to hold comfortably, even though it still has plenty of lead left? With the Pencil Saver , a simple 3D print, you can give your short pencils a…
This print could be very useful for people with disabilities and could give normal people more accuracy on certain games and joysticks, this print could possibly be put on PlayStation, Xbox, Steelseries branded controllers as well as the…
Yet more DJI Mini/Mini 2 Landing Gear Extensions. These are light, about 5.5 g for all four. They add about an inch (25mm) to the height. I used PETg, but they should be fine with other materials. I used .20mm layers. Could have used .15,…
The Mask strap extender helps reduce the pain and pressure of wearing a mask for a long time. Fits every mask and head size. Challenge: Help others around you - print the mask strap extender (ear saver) for them. Especially doctors,…
Small 250g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 250g spools have a diameter that is too small and the rollers won't touch the rim.…
Use the text tool in Prusaslicer to customize your signs :)
This model was found on thingiverse: https://www.thingiverse.com/thing:5507861 by DIVMSTER who remixed it (added the magnet recesses) from the original: https://www.thingiverse.com/thing:3054777 by SkornoThePro I printed it for a family…
With this and a few keystone jacks you can embed a Linux SBC (rpi) in your project and never have to crack the box open to service it. Print panel side down, supports very required. A 0.3mm layer print comes out quite usable. The panel…
This model replaces the chrome cap of the BMW coupe E92 extender arm with a hook that grabs the seatbelt successfully much more often than the original design. Designed to be a near perfect fit with the OEM shape. I recommend printing in…
Źródło oznaczyło ten model jako treść 18+.
GoPro arm extender - straight - 25mm, 50mm, 100mm
Remixed from bbeavis design (https://www.thingiverse.com/thing:3063090) I printed his but it was too thin, so I decided to beef it up and also change the design. It's also 2cm longer to be closer to your shoulder. I advise you to print…
This is my design of mounting feet and height extender for the Sculpfun S9. I'm not sure, but I think it should work with the S6 (Pro) as well. These are mounting feet including the possibility to increase the printer, depending on how…
An outlet box extender to use after renos... In 20mm and 10mm depth... Print Settings Printer: Ender 6 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: 3D Printing Canada Value PLA PLA white How I Designed This…
This is a design for a cupholder extender to fit large bottles that don't fit in the normal model y cup holders. This one is specifically designed to fit 2021 model Y cupholders, and a 36oz yeti bottle. I designed it to be printed on an…
All models were originally too high for my purpose so here we go: These attachments only raise the laser by 3mm as a first step, which still allows cutting paper or cardboard. Only when you attach the extensions does it get 30mm higher.…
This is a remix of my previous design for the Leatherman bit kit and ratchet driver pocket organizer found here . This new design is for the bit driver extender instead of the ratchet driver. It also now has positive retention for the bit…
Made this model from scrath with caliper measurements after I found a look alike model that didn't fit my snapback (the holes and pins were too small) PLA model with ironing to make the finish a little smoother. May require some cleanup…
1 gang electrical box extender 6mm (1/4") and 12mm for extending box when wall is covering has changed. I printed with PLA at .20mm layer height.
This is a no-glue no-supports removable joystick to hold between your index fingers and thumbs.
Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 500g spools have a diameter that is too small and the rollers won't touch…
The original design doesn't fit MiKA3D's 500g spools correctly, so I modified the tabs so they're easier placed on these spools.
If you need a few cm more to close the button
Info Both designed for 8mm arrows. I print arrowhead with 100% infill PLA and it works fine. For more durability, you can use etc. PETG, ABS. Recommended usage: Use the extender as close to the tip as possible for maximum efficiency…
Simple +2 grip extension that slips on with the stock magazine retention plate. Category: Hand Tools
How to use it - Important notice Press fit, just push the pencil making sure it makes contact with both set of prongs. It may scratch the paint on the pencil a bit. The extender needs at least about 1.5 cm of pencil for the plastic prongs…
A simple card to throw down and put your kickstand on when parking on soft ground. Much cheaper than an a fancy bolt on. If you lose or forget it, you can just print another one. This one has a Honda logo.
pencil extender for slightly use Derwent and Faber castell pencils. extenders are 100m long with slot 40mm deep good for the last ⅓ of your pencils. didn't have any heavily used Derwent pencils guess I like Faber castell. step file…
To impress the American consumer, makers of toilet paper have been putting more and thicker paper onto the rolls. Many people can only buy toilet rolls that are so large that they will not fit in the dispenser found in their homes. This…
Sun Visor Extender Tame the sunrise and sunset sun rays that escape your normal sun visor. Features Easy to use and adjust Goes together in seconds. Fits most visors Can be easily switched to the visor of the passenger side. Or print 2!…
Extender tube to add 5" of height to your Aerogarden Harvest. The wire going to the LED lamp has enough slack in it to accept this, but it's tight so you may want to extend the wire as well. I've included the Fusion360 file so you can…
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
Printed upright with no supports. Large sticks can be removed using an m3 screw down the centre, to push the original stick out. Or use the steak knife method by gently cutting a split and they remove nice and easy. I cleaned the inside…
printed using 0.4mm nozel with layer hight of 0.12mm
I wanted my IKEA ALEX drawers to open a bit wider. Disassembled the sliders, brainstormed for a while and made this mod. This replaces the original ball bearing holder to make more room for sliding. It opens around 1.5 Gridfinity units…
If my stuff makes you happy, consider donating $1! Hope you all can make a buck on it yourselves. This is a replacement light switch plate cover that allows you to flip a switch further from the side. Good behind shelves and other hard to…
An extension arm to get a longer reach for the MG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the SG90 servo's
Extend the box of your Wowstick electric screwdriver to fit the 3 tips tubes and the Wowstick itself. Need 8pce 5x1.5mm magnets https://www.aliexpress.com/item/1005002669769662.html Update: New version for 5x2mm magnets added. Need: Super…
Snap on extensions for using larger wheels.
The model can be printed without supports. Maybe just rotate and print. I printed it with 0.2 mm layer height The extensions are stackable PLA or PETG
Prints and works well in PLA. Print the slider (modify to length). Print 2 retainers. Install as shown. Video of switch in action. https://photos.app.goo.gl/P8CW2npe4peHb55Y7
I made this remix after printing the mini-talon extender FetteWorst made and realizing it needed some tweaking to work with the Venom Pro mag. The spring in the Venom Pro mag is too short to support the 5 extra dart capacity. It is…
I tried some filament holder extenders for A1 but I didn't really like any of them, so I designed my own. Lenght: 72mm - like stock 82mm 85mm
I 3D modeled the legs that came on my Two Trees TTS-55 Pro and added a 3/8-16 thread to the bottom to add extension risers of various lengths. The extensions are 10mm, 20mm, and 40mm columns with the same 3/8-16 thread. I also made a…
Remixed geometry from ttoadd's spool extender, credits to them: https://www.printables.com/model/338553-bambu-x1x1c-spool-extender Extends the spool holder out to allow for the AMS to stay plugged in while you use it. Can be used in…
The umbilical always rubbed on my tophat. When I Upgraded to 0.2, Pandora and AfterSherpa, this rubbing caused the sensorless homing to fail. Extrusions are pretty hard to get, where I live. These extenders raise the tophat by 30mm, so…
Parametric table mount This is a remix of 1llia's great Table mount extender model. The original model is a really great idea, but unfortunatelly it did not fit exactly to my needs, so I re-designed it from scratch. You can download and…
For all the indoor gardeners! I was tired of my very small window sills that were not wide enough to hold plants for good sunlight. I didn't want to permanently add a larger window sill with glue or screws, so I designed a clamp that…
UPDATE: added 12mm version. 2 gang outlet extender 6mm ~(1/4") for extending outlet box when adding tile backsplash or other wall resurfacing. I printed with PLA at .25mm layer height on Prusa Mini.
Use this to extend Geared BO motor, that comes in cuboid package, the shaft will fit tight, also the tyre can fit tyre on the other side
These slide over the factory rear vents to extend them past and over the floormats to increase cooling to the back seat. I suggest printing them in PETG or ABS so withstand the heat from a car. I will be adding models with more options at…
My cat loves to drink water from the bathroom water tap, but as he grew up, I decided to help him drink in a more comfortable position... But, didn’t find any solution that fits... #FTIJPI !!! Another good idea is to use it to help kids…
Holy Honeycomb! Your wall is organised to the max but you have one more item to add, but alas no usable hex spaces left or space enough to extend the honeycomb with another wall. This is where the Single Hex Extender might be useful to…
Logitech Paddle Shifter Adjustable Extenders These clip-on paddle shifter extenders offset the stock paddle shifter to better fit aftermarket wheel adaptations. These are designed to fit perfectly with my other hot swap wheel connector…
My late Mom's old Panasonic table radio needed its volume control (with integrated power switch) replaced. The replacement parts would apparently be considered vintage now, but Philmore sells an appropriate value pot with an integrated…
