418 modeli
I looked around for a 40mm blastgate design to use in a dust extraction system. I found a couple but all of them were pretty big and stuck out from the pipe a fair distance, they also required alot of hardware to make them work. I made…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tile for 3D printed game, Hextraction. Remixed from Zach Freedman's model, which has the unintended consequence of the center star acting like a ramp instead of allowing the model to trap the balls. In my remix, I changed the star from an…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
This remix of Zack Freedman’s Hextraction Secret Tiles introduces an alternative lid design. Instead of a flat question mark, this design is inspired by the Question Blocks found in the popular Nintendo Super Mario games. Learn more about…
Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu
Remplacement du déflecteur de la scie à onglet Metabo KGS 216 M qui n'est plus disponible comme pièce de rechange (n° 41 Extraction channel selon liste de pièces Metabo pdf). Visitez également mes trois autres modèles de pièces de…
Wydruk około 1,63 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation See here for a full explanation of the MagDuct system. This accessory provides a way to connect an open-air fume extraction nozzle to a MagDuct compatible ducting setup. Solution This design achieves the following objectives:…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a duct that you can attach to a $20 bathroom exhaust fan. I got the ReVent 50 CFM Quick Install Professional Ceiling and Wall Mount Easy Roomside Bathroom/Bath Exhaust Fan. The inlet is for a 4 inch hose. It has a rib so you can…
Wydruk około 12,99 €–15,87 € nettoWstępna wycena jednego wariantu
Designed to seamlessly integrate into your workshop, the clamp has a 35mm hole on both ends to suit a standard shop vacuum hose end. If you choose not to use the clamp, then I have included an adaptor to convert from flexi hose directly…
************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…
Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…
Hello, This was definitely not my idea, but what was available didn't quite suite my needs so I completely redrew a set of my own with some upgrades and went a bit crazy haha! This design is based on 3x10mm round magnets (Amazon afilliate…
See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…
Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…
Build-able marble racing !!!!!! Saw an Upload from A.Fool for his own modded tile which led me to find this, Without A.Fools tile i wouldn't have seen this , for that reason i'm uploading it here for viability. All models here were…
Update 01Sep20 I have an alternative design of blast gate that may be better suited to extraction of larger chips and shavings. 63mm (2½") ball valve: print 137795 A 100mm (4") ball valve: print 137794 This is a 100mm (or 4 inch) version…
Designed to clip onto your existing disk guard. Stays in place with friction/clamping. Will fit most Milwaukee battery powered angle grinders (I use it on an M18 FSAG model). Keep in mind that even though my printed version has a strong…
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
20May20 Marius-Bloemhof requested the CAD files: ( https://cad.onshape.com/documents/5425e358a4e266ea950b034e/w/fb495421e309359b374e4475/e/07ed980bcf8592c544c8964f ) Update 24Aug20: I've posted a new design for a blast gate based on a…
sprite extraction crate
Description The microSD card of the Bambu Lab X1 is a bit too deep inside the touchscreen; this tool eases extraction and insertion of the microSD card. I don't want to risk damaging the device by messing around with a sharp object or a…
Simple tool to extract rivets from the Core One. Just slide over a rivet to extract it. Prints well at 0.15mm or 0.20mm with either a 0.4 or 0.6 nozzle. Tested with both PLA and PETG. Best way to print is flat, not standing up!
A simple tool to extract Prusa CORE One nylon rivets. These are reusable rivets that are made of two parts, the outer sleeve and the inner pin. This tool extracts the inner pin which makes it possible to remove the outer sleeve from the…
Update 30 Sep 25 Michael Bohrer ( MichaelBohre_2970532 ) commented that he had broken this design because parts of it were too thin. On investigation, I agree that the outer edge of the connecting tube is thinner than I intended. I've…
A print that improves heat management and ventilation on QIDI's Q1 Pro printer. An internal duct guides chamber exhaust out of the machine's back panel. Adding this duct has three benefits: * Your printer's power supply and main control…
Convenient for removing dust when cutting tiles directly. Suitable for 125mm diameter disc May not fit all angle grinder housings Printing with supports Layer - 0.2 4 walls Filling 25%
Supports!? We don't need no stinking supports!! This remix of Zack Freedman’s basic Hextraction tiles was done to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for…
This remix of Zack Freedman’s Hextraction Pachinko Tile was done to replace the filament pegs with M2 screws. The fillets around the ball channels were edited slightly for a smoother appearance & the built-in sacrificial support was…
Quick Connection for the 120mm Dust Extraction system on woodworking machine. I can make other couplings for this system down to 80mm if needed. You need 10x D6mm and 5mm long magnets for each part to keep the both couplings together.…
My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…
Dust extraction nozzle for a Makita 18v Jigsaw (DJV180). May fit other models as well. The outlet nozzle is identical to the outlet of Makita's little 18V trim router.
This remix of Zack Freedman’s Hextraction Trap Tiles was done to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for supports. Learn more about the free 3D-printed board…
This remix of Zack Freedman’s Fancy Hextraction Game Board was done primarily to eliminate the need for glue or supports. All parts are now held together by screws, heat-set inserts, & small bolts. Part design & orientation has been…
A dust extraction nozle designed to mount to my improved 3018 spindle holder found here: https://www.printables.com/model/523635-3018-cnc-z-and-x-axis-upgrade Could also be easily mounted to the standard 3018 spindle holder Nozzle sits…
An osVAC-compatible dust extractor which can be installed on a 20mm multifunction table (e.g. Festool or Wolfcraft MFT). I adopted the original design by ggragg to add an osVAC adapter. The 20mm mounts for the table are the orignal ones.…
Update 24Aug20: I've posted a new design for a blast gate based on a ball valve: Print 137795 After having unclogged the groove, in the commercially available blast gates in my workshop dust and chip extraction network, for the umpteenth…
Clip on dust extraction for the Makita 3709 edge router/trimmer base to use with a 35 mm shop vac. Due to I was not able to find a design with either the right diameter for my 35 mm shop vac or the possibility to see what the router bit…
This remix of Zack Freedman’s Hextraction Clone Tile & Card was done primarily to remove the built-in sacrificial support as most printers should be able to bridge this distance without the need for supports. See the changelog below for…
A game tile for Zack Freedman's Hextraction “a purely physics-based newton's cradle-like contraption! if there is a ball trapped in one side, a ball from the other will knock it free! (most of the time. fun variation!) if a ball is…
I needed a valve that would let me connect my dust extraction system to the table saw and jointer. This valve connects to DN 110 drainage pipes commonly found in Europe. There's a rich ecosystem of ball valves on Printables. While this…
This remix of Zack Freedman’s Cartoon Bomb Tile & Card was made for both functional & aesthetic reasons. The primary changes were to remove the built-in sacrificial supports as most printers should be able to bridge this distance without…
She Who Must Be Obeyed did not appreciate the odor, even though there was acceptable ventilation. In order to maintain household happiness, I endeavored to find a fume extraction system. In my searching, I only found solutions that…
This remix of Zack Freedman’s Gear Tile & Card was made primarily for aesthetic reasons. The major changes were to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for…
! v1. of the ball-catcher combo is ONLY compatible with the fancy board variant of Hextraction which uses gutters. A future version for the basic board may/may not be made ! Print Settings: No supports should be required Both have been…
This is a tile for the game Hextraction. Tidal Wave: Pick a direction from where this tile is placed. All tiles in that direction are pushed one space away. If a tile falls off, it is destroyed. I printed using overture matt white PLA and…
This remix of Zack Freedman’s Hextraction Flip-Flop Tile was done to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for supports. The cross-bridging of the floating hole…
Needed the ability to connect my small 6 gal Shop Vac to my Craftsman Orbital Sander. Since the big box store was closed I drew this up and put it on the printer. By morning I was back to sanding with alot less dust. Printed on: Elegoo…
I always disliked the default secret tiles layout. It was easy to place in “invalid” orientations, cause jams to mechanisms, and unintentionally block paths. These tiles ALL: are playable in any orientation have 6 entrances/exits aren't…
I adapted the model from PeterH1500 (many thanks!) to the gray KG pipes which have a diameter of 50mm. I made the following changes: - Inlet diameter changed to 50mm - Changed the diameter of the outlet so that a 50 mm pipe can be…
Can be easily scaled for other evolution saws Concentrates suction and improves dust collection
I wanted a way to connect a dust extractor to my Workbee CNC, band saw, and potentially a third tool (e.g. sander) without having to manually plug the dust extractor hose between tools. So I designed this three-way manifold with butterfly…
This remix of Zack Freedman’s Hextraction Backrooms Tiles & Cards was done primarily to correct/update the rules text on the Backrooms Entrance Card & to remove the built-in sacrificial supports on both tiles as most printers should be…
Print base and top separately and glue together; if anyone wants the colored 3mf version, comment and let me know.
I'll need a funnel for a ‘poor mans’ dust extraction system. Width of the funnel is 160x150mm with an adapter for 36mm exhaust hose (e.g. Festo rubber adapter). This is used with a micro lathe for sanding cork floats. The funnel is an…
A set of 6 strange tiles for the hit new game Hextraction! They may not seem compatible, but some tiles (like the pachinko) are cross compatible. The “Base Tile” is generally used to keep the ball from leaving the board between Vertex…
A simple box, I designed for 10mm balls. I found out, that it is very satisfying, when the balls fall into their cutouts. Suitable for Hextraction. Features Space for 19 10mm balls (yes, it hurts because it's not a round number) The cover…
This remix of Zack Freedman’s Void Tile & Card was made primarily for aesthetic reasons. The major changes were to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for…
Introducing the "Respawn Tile" by NuIIPointer: A Revolutionary 3D-Printable Hextraction Tile for the Advanced Hextraction Grid, Designed to Recover Lost Balls. In the world of competitive gaming, where every move counts, NuIIPointer, a…
Introducing the Dicey Destroyer Tile! When the trigger gets activated, roll a six-sided die and destroy the tile adjacent to the number that was rolled. If the space that was next to the number is empty, destroy the dicey destroyer tile…
Ich habe hier einen Rohrlüfter kreiert für einen Schlauch mit 60mm Innendurchmesser und einen 120mm Lüfter. Mit Dichtung aus TPU A95 und Wandhalterung. Den Trichter habe ich mit 4 Wandlinien gedruckt, Stützmaterial ist nur unter den Ecken…
K tile for hextraction board game
A simple tool to replace the short lived card board based spent pad extraction tool.
Tile for hextraction gamę board
This is a remix of the teleport tile for Hextraction. The built-in supports are removed, as these should be bridgeable by most printers. Below is the original description by Zack Freedman: Beam your balls with this gravity-defying combo…
tile for hextraction board game
Adapter for popular airbrush booths that use 120mm fan mounting pattern. This adapter replaces the hose connector on the back, and angles it upward, where it can be connected to a magnetic hose connector by furfoxsake. I use this setup to…
Well, any tile within reason, at least. The bread and butter of buttered bread of this design is actually this Tinkercad link . Even though the native 3D viewer detests me (and the model itself is atrocious), this is a hole punch to…
I really liked the sprinkler head extraction tools published by Hanselcj, however, none of them fit my Rain Bird sprinklers. The pattern for the Hunter PGP sprinklers is very close, but the size is wrong. I quickly messed with the…
A bit early for Valentines, but here are some heart-themed tiles, for lovers of the game Hextraction by ZackFreedman Why not print the little 💕 around the top in a different colour? heart tile aka full of heart: a possible trap, usually a…
Zack Freedman's Hextraction game https://www.playhextraction.com/ encourages people to print their own game and even design their own tiles. Quite a few tiles can be used in ways that would cut-off a path for the ball; this tile allows…
PARKSIDE Router POF 1200 D3 Replacement for the original dust extraction adapter. Printing information The STL file ist correctly aligned. Layer height: 0.20 Perimeter: 3 Infill: 25% Support: none Brim: recommended I am looking forward to…
These two prints make up the 5-15 board from the native Hextraction source file, but break it into 2 components which are more manageable for printers with <300mm bed sizes. -final assembly will likely require glue to complete.
This coupler attaches to the back of the chamber exhaust fan of a Voron 2.4 (or any printer that has a similar 60mm exhaust fan setup). It replaces the stock 60mm fan guard. Use longer bolts that feed through the adapter, through the fan,…
This is a themed version of hextraction . Zack Freedman created a fun and interesting game, but visually it didn't resonate with us. So, we picked a new theme, modelled a new endzone, painted stls in the slicer and printed it. The chosen…
For some reason, the hole depths of the original mystery tiles were different, so the lid wouldn't fit, leaving a 1.5mm gap. I took the liberty of extending the holes for the broken models, but I left the lil DC tile unchanged, since the…
Inspired by the toddler wish to have tile with a snail I have created the Helix Tile. The sweeping was a nightmare but finally it worked and looks pretty awesome. Play Hint: you need one tile straight before the Helix Tile otherwise it…
Gauss Cannon tile for the game Hextraction by Zach Freedman. To use the tile, prime it by inserting two balls on one side of the magnet in the direction you want to launch. This tile only works once so after it is used you can use it as a…
This tile is designed for the boardgame by Zack Freedman: Hextraction. The moment I saw the 3 way traptile, I was thinking of the radiation sign, and my tile was born. It is called: Reactor meltdown. It is a tile to give the game a bit of…
This custom-designed tool slide integrates a Dewalt Trim Router Plunge Base with a Festool track, allowing for precise and adjustable cuts along the track’s length. This design is perfect for cutting custom-width grooves by adjusting the…
Base and hose adapter are printed in PLA or PETG Hose Unit is printed from TPU 95 The base and hose adapter are glued together. The section of the hose adapter that inserts into the base is 31.75mm (1.25") in ID and 38.1mm in OD if you…
Adapter for the Hammer saw dust extraction. From the factory, the suction hose is attached to the waste chute with a hose clamp bent into a square shape, which does not work well. Larger pieces of waste also punch holes in the thin hose.…
What originally was designed to be take on a classic pee-wee golf hole ended up looking like some funky emergency raft. PETG printed just fine with minimal organic supports.
Clip-on dust extraction for Festool MFT/3 Multifunction Table with holes for 4x workbench dogs pin storage. It simply slides in the table rail and holds the special air suction from the dust extraction nozzle where you need it allowing…
Tired of your balls rolling everywhere? Here you go! Designed to keep your 3 tiles together, while keeping your balls in place. All that's needed is a Hextraction Set and 10mm balls (which I'd assume you already have), around 25g of…
I just need a 50/100mm version of this wonderful valve to connect a hose to the hand saw to the dust collector.
The hextraction board legs are currently (beta) in 2 parts, without any way to connect them together. This will probably change in the (non beta) release. Since I cannot wait to test silly things, I merged the top and bottom parts of the…
These pliers can aid in removing a spent cartridge from a .22LR breach loading gun. -Print the two copies flat side down. Use PLA or PLA+ -Assemble using 14-15mm length M3 bolt, 2 washers, 1 nut, thread locker.
I created these for 2.5" hoses, and use them for fume extraction for FDM and resin printers. In my case, they attach to an inexpensive inline fan to vent any fumes outside. Hose I use: https://www.amazon.com/dp/B07BFSB2BW Clamps:…
A dust extraction nozzle for Makita multitool (DTM50Z). Has the same size outlet pipe as their 18V router, or the other dust extraction nozzle I've made. Best to print in something like Nylon/CF I think. Messy design I'm afraid, but I…
Additional clamp to connect the original model ( https://www.printables.com/model/820914-flexible-hose-for-dust-extraction ) to a Wabeco drill stand with 35mm diameter and outbound connection to Bosch C35 dust extraction system.
Model includes test fit piece for M3 nut and 3x8 magnet, you don't have to print it . Print setting: 3 perimeters at least 15% infill I'd recommend "pull from behind" method for installing Nyloc Nuts. Magnet extraction hole is made for…
Key Replacament for Controll Buton Smoke Extraction Vents Model RT 45-LT D+H Mechatronic AG Better and stronger than geniune _ Use some supports to keep print stable white printing Category: Replacement Parts
I love the original idea, and the main design of the lamp, but I improved the look. For the best look two filament changes are recommended. (The photos show the tile printed scaled down to 80%, since my whole Hextraction set is 80% scaled…
Printed in PETG, PLA may also be possible. 0.2mm layer No supports needed. Remove the tongue and put it back with the short end to open the valve.
I was having trouble cleanly printing the original secret lid for the Hextraction board game, so I took the liberty of indenting the question mark to allow me to print it with no supports at all, Be sure to rotate the model so that the…
Quick refrence to instructions for Zach's ( https://thangs.com/designer/ZackFreedman ) game called Hextraction.
A 90 degree connector for an extraction fan to allow me to better vent out nasty resin, airbrush, or solder fumes. you might need to use an elastic band to “seal” the elbow onto the extraction fan. See gcode for an example of the…
This is a tile for the game Hextraction. The grass is always greener on the other side: Trigger: Take ball out of this tile and place it in any adjacent tile. Printing Instructions I printed using overture Bambulab Green PLA. It prints in…
Who said it had to be a game? i thought it would be funny if i actually made tiles for the “gridfinity 2.0” april fools announcement from zack freedman. it was not funny. im still posting it.
A tile for hextraction game where all paths lead to the same place
53mm wide organizer for Hextraction tiles. 5 standard tiles will fit per column. Printed with 1 wall (0.4mm wide) and 2 bottom layers to save your filament.
