53 modeli
CZ verze 13 × 18 cm , verze 15 × 21 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 10 × 15 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…
Instead of using a 8mm rod & bearings in the X-ends, the X-ends have been changed to make use of a single LMUW10 (and thus 10mm rods). No loss of print volume, no custom firmware, it's all fully compatible parts. Oh. And it's usually…
CZ verze 10 × 15 cm , verze 15 × 21 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 13 × 18 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…
CZ verze 10 × 15 cm , verze 13 × 18 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 21 × 15 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…
I was always kind of upset with how heavy the stock MK3S+ and Bear toolheads were, so I decided to modify a friend's Orbiter mount to work with the amazing Annex Engineering Sherpa Mini extruder (link to github below). Prints have been…
Could not find a holder for my tool to keep my shop organized so decided to design one. t does not need any support
I had a friend that wanted a Bear version of this camera mount, so I got to work editing for the new geometry. This doesn't move the camera too much from it's original position, so it shouldn't throw anything off. This also fixes the…
Remix of two wonderful designs to allow for you to fully rigid mount a TriangleLab or Phaetus Dragon SF/HF and also use the Delta P V2-R2 fan duct on the BearEXXA. Any and all feedback is welcome! NOTE: You will need 4 M2.5x5 or 6mm SHCS…
Bear EXXA motor cover This is a motor cover for the X axis of the Bear EXXA upgrade. The 'PRUSA' logo can be highlighted by printing the insert part with a different color. !! PRINT IN PETG. The heat generated from the X axis motor will…
Disclaimer: it's a really minor modification, but this is untested . I haven't put this to use myself (I went straight to a 10mm Z-axis in my upgrade/mod-endeavors). Instead of using two LM8UU bearings in the X-ends, the X-ends have been…
Schneider Exxact Dimmer Knob
I was always kind of upset with how heavy the stock MK3S+ and Bear toolheads were, so I decided to modify a friend's Orbiter mount to work with the amazing Annex Engineering Sherpa Micro extruder (link to github/BOM below). The stock Bear…
I was not content with other extruder designs for Slice Engineering Mosquito hotend so I designed my own. Introducing the BearExxa Mosquito based off of the Bear Extruder created by Grégoire Saunier . Big thanks to both Grégoire Saunier…
This has been made for use with common 20T 5mm-bore idlers with the following dimensions: 5mm bore 18mm flange 9mm width (6mm belt) Changes made to the original the parts: Upsized the bore to 5.04mm, same as the E3D-idler design (from…
This remix of Gregsaun's BearExxa (Bear extruder and X axis) repositions the extruder to match the vertical position of the stock MK3S extruder. This allows for stock firmware to be used without flashing any calibration firmware. The…
I made this to mount a 5.5mm endoscope on to my extruder and make a nozzle cam controlled by Raspberry Pi and Octoprint. This rear mounted design is the easiest to install and has the best cable management. Basically it just adds another…
This is a remix of the Bear Exxa extruder cover that adds a small peg that prevents the Dragon hotend from turning. This is achieved by a the addition of a small peg that locks down into the structure of the dragon hotend and holds it…
Here are two parts that you can print, I only use the "front" part because the 3 button frame I use is attached to the switches. If you choose to only have the Aqara mini switch with Exxact 1 ram, also print out the "back" part which you…
- Added some space for cheap couplers (Motor Mounts) - Added some Bearing to Top mount - Reduced Guiding in Slot Added remixes guide for Rod from https://www.thingiverse.com/thing:3282965
Snaps into the empty frame of an Schneider exxact. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.2 mm Infill: any Category: Household Supplies
Oops Well, I was browsing the repo after I published this and saw there was already an official reverse bowden setup up there. https://github.com/gregsaun/bear_extruder_and_x_axis/tree/master/optional_parts/reverse_bowden I'm leaving mine…
Revo Six needs ptfe tube trimming. This tools is used to trip it. Print parameters are the ones used for original tool
Slide this cover over the Schneider Exxact housing (with the button removed). This enables easy access to toggling power if needed. Printed without supports.
Modified the Bear Upgrade 2.1 Extruder (BearExxa) Cover (fs-cover) to fit the original M5 fitting used by Prusa for the MMU2 cover. I bought the fittings here: http://lecktor.com/en/nuts/159-tappex-microbarb-m5-pack-of-10.html Print…
Lovec Divočiny je detailní fan‑art miniatura inspirovaná legendárním půl‑orkím bojovníkem a pánem bestií. Postava stojí v pevné, bojové póze, oděná v těžké zbroji a vybavená masivními zbraněmi. Drsný vzhled, výrazné textury a robustní…
Bottom needs 40% less filament.
I printed the model in PETG with 20% grid infil
This re-adds the collet from the Dragon hot end back to the mounting hardware. This should help keep the PTFE tube nice and flush against the top the hot end and prevent it from pulling out when removing filament. The collet isn't too…
A wall mount for the Philips Hue Dimmer Switch (v2) to use with Schneider Electric “Exxact” light switches. This mount requieres no drilling, taping or any modification to the wall. I created this since I was not sure if I will like the…
Bear Extruder Motor and Idler part for Chinese TR8 Anti Backlash. Model is for MK3s 1st Version to test. Category: 3D Printer Parts
Snaps into the empty frame of an Schneider exxact. Category: Household Supplies
This is a riser frame for Schneider Electric Exxact 4-way socket-outlet. Part: WDE002488 Frame is 12mm thick, hole is 10mm. Print instructions I printed this in white PETG. Unfortunately the white shade was not correct.
This is model is from two different remixes from different versions of Bear X-Axis and Bear Exxa assemblies. I took parts of two remixes and combined them to make it work for the Bear Exxa 1.0.0. Works great! Feel free to remix this to…
For mounting IKEA TRÅDFRI On/Off button in Schneider Exxact frame on top of a existing lamp button. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.3 Infill: 25% Filament: Clas Ohlson PLA White…
This Extruder Cover uses the cavity at the base of the Revo 6 to prevent the hotend from spinning, and also prevents heat from the heater core from escaping into the cooling area. For bearexxa V1, and also a version for the delta p bear…
Pictures tell the story - use this to nicely integrate Philips Hue Dimmer Switch to an existing Schneider Exxact light switch without permanent modifications. Installation Remove the original Schneider Exxact components: Button, part that…
While using the original model for a few hours of printing, I noticed that the PTFE tube slowly moves upwards because of the retractions and inevitably gets caught by the extruder wheels. The tube is afterwards damaged in such a way that…
Pictures tell the story - use this to nicely integrate Philips Hue Smart button to an existing Schneider Exxact light switch without permanent modifications. Installation Remove the original button from the light switch by pulling. Use…
Update May 3, 2022: I recently tried printing an object that completely filled the print bed of my bear Prusa and discovered that this endo mount hits the power supply at the extreme X axis position. It's fine for prints that don't go…
You will need an additional 625RS or 625ZZ bearing. It is not possible at the moment to add mor things to the remix sources, so i have to link them here manually. This thing is a remix or inspired by the following things:…
an upload of my Thingiverse upload thing:5920110 this is a combination of Bear Titan Extruder MK2.5S by TimeWalker75a ( https://www.thingiverse.com/thing:4533682 ) and Full Bear MK3 X/Z Lineal Rails MGN12 by DanielSan_84 (…
This version of the X carriage changes belt alignment to make it compatible with BearEXXA. It allows to use the original MK3S toolhead on a printer with BearEXXA X axis mounts
Changed the filament sensor cover so that an LED behind it shows the status of the sensor. The side walls of the recess are slightly bent to avoid pushing through. There are two versions of the window insert available. The smaller one fit…
Didn't want to cut the rods I was using so edited the Bear exxa STL
Remix for new on-off or up-down tradfri switch
I wanted to be able to use my cheapo v6 hotend for one hand nozzle swap, but the screw heads were colliding and the PTFE was not secured. Currently testing, use at your own discretion I bear no responsibility! Credits to Greg Saunier for…
A mashup model to add a PC4-M10 ptfe to the bearexxa extruder
DK version ( lower module in picture with double frame) Remove original frame (2pcs) from the wall switch, click module (button) into the frame and press into place. Use a bit of tape to secure, but should not be needed. (i can barely get…
I guess this could work for other smart buttons etc. Print with supports on build plate.
Simple mod of BearExxa filament sensor cover to accept QSM-M5 fitting when printer is placed in an Original Prusa Enclosure.
If you do not want to use any adhesives, maybe beef up the “legs” or add screw holes. Fusion file is also uploaded
In case you misplace your Hexxas Y spacer part you can print your own! This is the 1cm spacer for the bigger option.
I made this keeper because I use Zigbee lights and want the wall switches to stay on. It clips onto Schneider Exxact frames to prevent accidental switching. The low profile leaves most of the rocker visible, and it’s easily removable when…
![X axis Motor Cover [Bear EXXA]](https://media.printables.com/media/prints/70246/images/765621_3c7cfd1c-9b3d-48b5-bf9e-9d76a0915528/x_end_motor_2021-jun-30_09-44-16am-000_customized.png)
