943 modeli
A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
An accessory for the Lucky 13 Figure, I'd recommend print at 95% scale for easier holding. Add tape or glue to hold the two pieces together.
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 4,42 €–5,40 € nettoWstępna wycena jednego wariantu
This is an insert for the recessed area on the dash on a 2013 F250. It provides a flat surface to mount a stand for your phone. Corner stands are included, but are designed for my phone case. The corner mounts should be easy enough to…
Winner, 1952 Grand Prix of Switzerland, driven by Piero Taruffi Piero Taruffi, a native of Rome, studied industrial engineering and showed potential racing motorcycles, but wouldn't achieve success in competition until after World War II.…
Wydruk około 6,79 €–8,30 € nettoWstępna wycena jednego wariantu
Ford F250 double din 7" stereo bezel printed in PETG
Wydruk około 1,12 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ZX PicoIF2Lite Interface Case Designed for v1.0 PCB. Case just pushes together but for longer term use recommend a little bit of glue on each corners. The Pico is fully accessible so no need to open the case once all set-up. For details…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Ford Dashboard Storage & Samsung Z Fold 4 Phone Holder
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
This model is designed to mount to the handlebars of a Honda CRF250L dirt bike and hold a ryobi battery for charging your phone. The battery is https://www.ryobitools.com/products/details/33287213603 and should fit snugly into the spot.…
Wydruk około 2,54 €–3,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EDIT: I have added 2 more variants of the kit (looped and un-looped) with the main fuselage flipped round the right way. Should remedy any confusion, but keep in mind the very thin footprint at the rear! The F22 Raptor is a 5th generation…
I thought this weapon looked neat, so I decided to make it! I took the model from the game files and split and modified the model. The break-action and trigger were also modified to move. If you'd like to do the same to one of your…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the corsair is very realistic Print in place kit card , Assembly required
iPhone Stand Dock for Cupholder BMW F30 F31 F20 and many more I designed it to fit an Apple iPhone 8 in my BMW F31 cupholder. //UPDATE: Works great with the new iPhone 13, older Models as well. Hi there, I designed something special for…
I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…
Inspired by Daniel Norée's openrc F1 project I wanted to build a remote controlled Formula 1 car of my own design and fixing the ‘flaws’ of his car. I wanted my car to have a fully independent suspension utilising pushrods and not just…
Heavy model ripped from the TF2 game files.
For the massive weebs out there. This is a high quality, 1:1 accurate version of the Spy's Conniver's Kunai from Team fortress 2. Designed as a prop replica (not a weapon), that you can simply print and put together. full size : 34.6cm x…
This is my take on the mini sentry from TF2. While the model is mostly 3D printable, it has been designed with laser cut steel plates in the base for extra stability and strength. DXFs have been included. Bill of Materials Check out the…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Hardware requirement: #4 x 0.375in Thread-Forming Flat Head Screw, QTY 9 Two sections of 4mm elastic string Talon Magazine spring Secure the Magholder with one #4…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Check updates at the bottom The print files only contain my modified parts, so you'll need to print these plus parts that the original battle axe has, the original…
Material: PLA Layer hight: 0.12 mm Support: No Infill: 30%
Two jigs for processing business cards with the xTool F1 Ultra. One is a tight fit with dimensions of 86mm x 54mm for each card. The other is a loose fit with dimensions of 87mm x 55mm for each card. I generally use the loose fit, however…
The default model is 1mm thick and arround 20cm. It was abviously to large for my ender3 so i split it in the middle. You can scale the parts as you want but don't scale all the axis the same otherwise the tickness will change too. You…
F22 Raptor with a wingspan of 70cm There is also a single part print to scale to the size you want
3D print file for QUADMULA Djinn F25
Easy to assemble. -Two colors -organic support -0.15 layer height
only dupont connectors needed remove the plastic and bend the pins accordingly(2mm between pins at the end) the pins should stick out about 1~1.5mm out from the surface if you can't make this just buy this…
A simple drive bay for 4 Dell 3,5" LFF HotSwap HDD caddys. The SATA/SAS Connetion at the back is not mounted, the rear of the HDD is exposed to plug in manually. Fits a 120mm Fan on top for cooling Printing orientation: on its "back" with…
This is a complete of fixed fences for positioning items on the xTool F1 Ultra. This set consists of straight, right-angle and cross fences in all relevant sizes. These are held in place with standard m4 thumb screws.
Scout model ripped from the TF2 game files.
English version, German version below Description: Pictures are a wonderful way to fill empty walls. However, one can quickly get tired of looking at the same picture, not knowing exactly what to hang on the wall, or not wanting to invest…
Print with PLA, need a rubber band
Pistol model ripped from the tf2 game files.
Settings: 0.10mm Fast Detail Ironing: On Infill: 30% Filament used: Prusa Galaxy Black PLA Generic white PLA Made using Autodesk Fusion 360
Ferrari Sf-26 F1, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Pyro model ripped from the TF2 game files.
Team Fortress 2, Engineer PDAs 1:1 accurate Designed as a prop replica that you can simply print and put together (glue required) Destruction: full size : 14.8cm x 9.8cm x 3.5cm The antenna extends and the button can be pushed via a…
a f22 model ideally printed vertically (nose up) floating about an 1/8 of a inch with organic supports everywhere
3D print file for QUADMULA Djinn F25 SP *The parts of Djinn F25 SP and Djinn F25 Split are completely incompatible. TPU BlackishGreen - Link
Soldier statue added to TF2 in rememberance of Rick May, engraved with the text that was originally only present in the normal map of the model. Should be printable, will test once my MK3S is assembled. Category: Sculptures
This is an expanded version of Jason D Modular Battery Holder. I've made several changes to clean up all the “remixes” out there, make the modules truly standardised and “OCD friendly”. I was basically annoyed how different remixes…
Description Immerse yourself in the world of aviation with our 3D-printed F-22 Raptor Kit Card. This unique and versatile product combines the excitement of building a model aircraft with the convenience of a greeting card, making it a…
Oh yeah, I over-engineered the hell out of this one! I went through more than 12 iterations and I think this is going to be my final version. The main challenge was designing outer walls that print without a million retractions so I…
Basic balisong from Team Fortress 2 for training or cosplay.
Engineer model ripped from the TF2 game files.
Maqueta del Ferrari F2012 que pilotó Fernando Alonso en el año 2012
A simple key tray for the BMW F20/21: finally the thing is well stored. Just put it in the cupholder - done. Consists of two parts that are glued with CA.
LEICA style lens hood for fujifilm XF23 f2
Soldier model ripped from the TF2 game files.
1/24 Scale 1996 Ford F250 for Axial Crawler Body
Medic model ripped from the tf2 game files.
This is currently my favorite weapon in Team Fortress 2, so I decided to make it! I took the model from the game files and split and modified the model. The slide and trigger were also modified to move. If you'd like to do the same to one…
Spy model ripped from the TF2 game files.
A case for openDTU Breakout Board (PCB) with a ESP32 (38 Pin) and a NRF24L01+PA+LNA radio module. The Gerber files for the openDTU Breakout Board you could find on my GitHub page . Print instructions Parts 1x openDTU Breakout Board 1x…
Heavy's Minigun model ripped from the tf2 game files.
I've built a case for my pcb that holds 1 esp32 and 2 nrf24l01+pa+lna I've attached photos so the exact placement of the esp32 and 2 nrf chips can be seen. The case also have 2 holes to store the antennas safely. The case have a small…
Flamethrower model ripped from the tf2 game files.
This is a replica of the goggles worn by the engineer from Team Fortress 2. They are not using the actual model files from the game, but instead I have recreated myself in CAD using image reference. However, I tried to optimize them for…
Jig for aligning four 4" slate coasters on the xTool F1 Ultra. This one has shallow cutouts due to the inconsistent sizing and edges of slate coasters. Makes lining up four of the for repeatable results much faster.
Team fortress 2 pyro head with 3 variations
I designed this to protect the NEF24 module that I bout for my flipper zero. It has easy access to the pins and fits the board perfectl.
for me it fits for all bars. so no need to print different ones, and that makes the asselmby much more easier ;-) it has also som gap in the construction that it fits thin isolator and also thicker ones .. see pics ^^
https://youtube.com/shorts/IHuoRIZewV0?feature=share Thank you to others for inspiration - I am certainly not the 1st to have this idea. Print flat on bed, feel free to use the blade to push in the pins (or, say, a screwdriver) I…
This is the lugermorph model ripped straight from the tf2 files, you may need to use mesh fixes to get it to print correctly. Edit: I fixed the models mesh and now it should print with no issues, I printed it at this size with a .6 nozzle…
This is the scattergun model straight from the game files, you will need to mess with mesh fixer settings in your slicer to get it to print cleanly. cura was able to print it without too many problems after some tweaking. Ive included the…
For all your wranglin' needs. No amputation required. This is slightly off model as the grip is simplified. I built this to control my mini sentry which you can see in action here Bill of materials
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Check updates at the bottom This blaster cuts the plunger volume by half so it only shoots bamboo darts at 100 FPS with a K25 spring... Update: 120 FPS with a K25…
I made this Toy because I heard Kids at the Park that they like Airplanes so I used my time to create a F22 Raptor Toy Plane for Kids to play around with at the Park or at Home.
**THIS IS A REPLICA, PROP ONLY** Size: - 197.10mm (X) (Default Size) - 214.68mm (Y) (Default Size) - 29.85mm (Z) (Default Size) – Change To The Size You Need (RECOMMENDED) – Split/Cut If You Need To Go Bigger Supports: Yes (See What Works…
This is a display stand for the F22 Remix model found here . The display stand base can be printed at 1:1 scale, The stand tower needs supports so that the lip around foot is supported during printing. The F22 model needs to be printed as…
Front lens cover for Hasselblad Carl Zeiss Planar T* f2.8/80mm FE. I've included the following versions With logo: Can be printed with 0.40 mm nozzel otherwise the logo wont be printed correctly. A layer height of 0.15mm or lower is…
I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…
Use some white filament and flatten it for the led diffuser. Note the case has tight tolerance so if the module does not fit it is due to the prototype board not being aligned or slightly bigger. To fix this just sand the sides until they…
This is the F22 raptor a stealth fighter of the 5th generation of jets when printing use supports for better quality and it can hold its self up all by its self as well
Needs scaling for most people, worked nicely for me though. Category: Keychains
I havent printed this myself yet but I have fully sliced it and it seems like itll work fine, you should be able to scale it to any size, and make sure to use supports. Category: Video Games
A simple plate model designed to hold six aluminum business cards for engraving. The cards are intentionally offset from the plate’s horizontal center, allowing the use of autofocus during engraving. Initially, I encountered issues with…
It has so little parts it is easy to put together, if you are confused contact me. Scale the model as big as you can in your slicer for best results.
BMW Phone Stand for the cup holder. I added the pit for the key or something diffrent behind the phone. Simple to print, I uses ASA so it doesn't bend when the car is parking in the sun. Recommend somthing similar like ASA, ABS or PETG.…
please follow us on instagram if you like this work: https://www.instagram.com/3dprintkings I recommend to do a color change by script and use a prime pillar
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4s.…
This is an easy to print cover for busbars to avoid shorts. It covers all metallic surfaces. clicks onto the busbar It has a slot for voltage taps (L and R version have slightly different location) Has space for 2 mm insulation between…
tf2 pyro mask and filter gonna need support work with ender 3
ctf_2fort comes to your desk in this small printable model form! The model comes with its .stl file, .3mf project file and a pre-prepared lower print time low quality .gcode file for a 16cm long print for the Prusa i3-mk3s+. If not using…
I designed this as a Christmas card to send out to friends and family last Christmas, we ofcourse need to come up with something new this year so here internet, it is yours! The intention is for you to add some writing (your name, etc.)…
I added the "F22" to the left wing of the original model
USB-powered sentry with space for a 28byj-stepper, 30mm-ish speaker, and electronics. the lid of the magazine can be removed. the stepper needs to have the screw hole tabs trimmed down to fit. demonstration:…
Trichter zum befüllen von Scheibenwischwasser für z.b. BMW F20 Der Trichter wurde so geändert, das man einen O-Ring einsetzen kann um einen stabilen sitz zu bekommen und gleichzeitig eine abdichtung zu erzeugen.
Rocket Launcher model ripped from the tf2 game files.
Simply camera holder. This one is for HBVCAM-F20216HD, but you can mount it to anything with 2 holes 10mm apart. BOM 2 M3 hammerhead nuts + 2 M3 8mm BHCS for fastening 2 M3 10mm BHCS + 2 M3 nuts for joint 2 M3 6mm BHCS + 2 M3 nuts for…
Hello, Printables community! This is my first upload here, and I want to share something that I think is quite cool! I have always been a fan of classic games, and one game that shaped my childhood is Team Fortress 2 (Tf2). I created a…
Scattergun model ripped from the tf2 game files.
Square style lens hood and cap for the Fujifilm 35mm F2 WR lens. Example was printed on a Bambu Lab A1 using eSUN Upgraded Matte PLA Filament with a 0.4mm nozzle and a layer height of 0.2mm. The model can be printed without the use of…
Xtool F2 Ultra 90 degree Ventilation adapter, used on the back side fan outlet
The handle in the image is a purchased model from Lock Blaster Mod Kit by PerformanceMods . I think it goes really well with it so please check them out. Tools: 1. Saw or Dremel 2. Pliers 3. Clipper 4. Glue Hardware: 1. Round Steel Metal…
Sniper model ripped from the TF2 game files.
Mein Dosenhalter (0,33l) für BMW F-Modelle. Ich nutze den Cupholder in meinem F87 M2, die Energydrink Dosen wackeln nicht mehr hin und her :) Druckt am besten in PETG aufgrund der Hitze die im Sommer im Auto entstehen kann. 0,25l-Variante…
![Big Kill [TF2/Sam and Max Spy Gun]](https://media.printables.com/media/prints/87263/images/923107_5ea6a6b9-a89f-4818-bc94-8a3c3f6ed86a/ce3_bigkillmeshfix_preview.png)
