Liczymy pasujące modele…
Das Modell ermöglicht es, das Filament in das Gehäuse des „ PrintClosure Project ” zu bringen. Der Deckel meines Gehäuses ist 3 mm dick (ich habe Acrylglas verwendet) und es ist eine Bohrung mit einem Durchmesser von 14 mm erforderlich.…
Filament feedthrough for dry boxes Easy to print in PLA. If the tolerance of the nut is to tight, then scale the nut model slightly up. If the filament hole is to tight, then use a 2mm drill too enlargen it. Feedthrough nut has a Ø14mm…
I made this remix for usb plug hole in the mini enclosure to use it with the usb mount by https://www.printables.com/model/1003952-external-usb-socket-for-mini-enclosure. Printed in Prusament PETG ultramarine blue.
With the help of this adapter, you can attach a PTFE tube at the top of the tapered opening. The filament will then exit through the enclosure. Suitable for a 20mm thick plate.
Intro This is a 2 piece dry box feedthrough with threaded connection to 4mm push-to-connect fittings. There is a recessed area to add a piece of foam to scrub any debris from your filament before it reaches the extruder. Files are…
Ich möchte den serienmäßigen Filamentrollenhalter nicht verwenden, da ich auch meine Filament DryBox, die auf dem Boden steht, mit dem SV08 verwenden möchte. Daher habe ich eine Sensorhalterung und eine PTFE-Durchführung mit einem…
Perfect upgrade if you want to have two 1kg or 2kg Spools used on your Prusa Enclosure. Includes a feedthrough which allows routing of the filament through the topplate of the enclosure. More details on popular demand, contact me. 3MF and…
A top filament feedthrough for the original Prusa enclosure using an PC4-M10 pneufit and 4mm PTFE- tube.
PTFE Tube Feedthrough for 3D Printer Enclosures Function: This 3D-printed component serves as a feedthrough for two 4mm PTFE tubes through the enclosure wall of a 3D printer. It facilitates the external supply of filament from a dryer…
English Version I designed a feedthrough for the Kobra 3 when printing in an enclosure. The cable from the ACE Pro can also be fed through the feedthrough. For this purpose, there's a block in the middle that's split, into which you can…
To guide the filament from the dry box into the self-built enclosure (IKEA Platsa) of my Prusa Mini, I developed this wall feed-through. It can be inserted into a drill hole from both sides and screwed together. Two PTFE couplings with an…
For my printer I needed a PTFE connector that is able to go through my cabinet. This adapter just needs a 10mm hole drilled in your cabinet and can handle a board thickness of 17-22mm. (Fits for a standard IKEA cabinet). To assemble the…
This is a simple cord feedthrough for the fan that's in my drybox. It's been sized for my cord to get a tight friction fit, but you can modify as you need. Printer Settings Material Type: PLA - Not limited to Layer Height: 0.2 mm…
Feedthrough connector for WAGO 221-411 connectors. Perfect for going entering enclosures or going through walls with cord with up to 3 wires. There are three options of entering the connector from the “outter side” Corrugated tube…
I wanted to be able to switch a magnetic light fixture inside my Prusa Original Enclosure without opening the enclosure. I also did not want to punch more holes in the acrylic and noticed my handles don't do much for me when not being…
Designed this for drybox use. it is a feedthrough that allows a 45 degree outlet. Threads for the "10mm" PC4-10M are NOT 10mm standard. (in fact they are BSPT 1/8in, tapered). the threads in this design are 10mm, .91 pitch non-tapered - a…
I needed to side-load my Ikea Lack enclosure, which I made higher for my MMU using an 44x66mm piece of wood. Wanted a PTFE tube connector M10PC4 on 2 sides, and no issues with loading; so the rod/axis sticks out a bit to guide the…
Das Modell ermöglicht es, das Filament in das Gehäuse des „ PrintClosure Project ” zu bringen. Der Deckel meines Gehäuses ist 3 mm dick (ich habe Acrylglas verwendet) und es ist eine Bohrung mit einem Durchmesser von 14 mm erforderlich.…
Filament feedthrough for dry boxes Easy to print in PLA. If the tolerance of the nut is to tight, then scale the nut model slightly up. If the filament hole is to tight, then use a 2mm drill too enlargen it. Feedthrough nut has a Ø14mm…
Back in 2018 this was my very first design online. It's the first someone else downloaded, printed and posted a make of. It really felt good and it still does :) https://www.thingiverse.com/thing:3055819 BOM to print: 1x…
I needed an insulated feed through for an antenna lightning arrestor I'm building for shortwave radio. The STLs as presented are specific to my application, but I am including the FreeCAD file as well, in case you need to modify this to…
I didn't have a wallmount but had a lot of alupex couplers laying around. As I needed a wallmount to feed the waterline through the wall I created my own mount. Clamp 2 parts together over the coupler with an M6x60 bolt and nut.
After upgrading to the new Prusa enclosure I had an issue of trying to figure out the best way to load filament to the MMU2. In the end I decided on this design. I reworked the rear top plug at the back of the enclosure to have 5 holes,…
This is a collar to fit every standard 68mm diameter hole that is commonly used in the EU for installing sockets and light switches etc. If you need to feed a cable into such a hole e.g. speaker cable, HDMI, ETH to some other HiFi…
Cable grommet which screws into each other from two sides. Two models; one for ~4-6mm thick wood, one for ~10-14mm thick Used this on my camper. Might need to scale inside/outside part by 1% bigger/ smaller in X,Y to create extra…
Wire / cable / tube feedthrough - screwable 65mm hole size; used this to route wired and water tube to bottom of van. 65mm drill hole size. Everything except the feedthrough plate was printed in PA-CF. Feedthrough plate in TPU 98A M65x4…
This is a cable gland for garage ventilation holes. The insert is designed for 90mm holes and cable glands with M40x1,5mm. --- Das ist eine kabeldurchführung für Garagen Lüftungslöcher. Der Einsatz ist für 90mm Löcher und…
I wanted a filament feedthrough for the Snapmaker J1 that could be screwed into place. The design is divided into an inner and an outer part. The files are available in a left and right version. However, you can also load one version and…
This is a simple filament feed-through for the Snapmaker J1, if you want to put the spools inside the printer. There are version which go straigt up and versions that are tilted 20 degree to the left and right. You don't need any tools or…
Remix for connectors with M6 thread. Two versions, tight fit and one with looser thread tolerance.
Another top plug edge remix, this one for single or double PC4-M6. No support material required. Remixed in OpenSCAD.
I found that the nylon tubes would sometimes slip down when using the original tube feedthroughs when loading filament. I designed these adaptors to be used with push on BIQU PC4-M10 connectors. They hold the filament in place well and…
Changed Double M6 to double M5 Thread
I needed to modify my dryer box. The standard filament outlet was for me not optimal. I needed an extra outlet in a different position for the feedthrough. I created a standard feedthrough that can be fitted in a 6mm hole. I printed it in…
Hello everyone, I would like to make my filament feedthrough for my DryBox available to you. Have fun with it what you need Ptfe tube ______________________________________________________________________________________________ Hallo…
UP adapter for standard cable feedthrough for 5x4mm cables
Overview This model is a cable feed-through for the Bambu Lab AMS, designed to keep the back of your cabinet neat and organized. It allows for easy routing of PTFE pipes and data cables, eliminating the need for an unsightly hole.…
I had uploaded a feedthrough for the MMU previously, which consisted of two parts. https://www.printables.com/model/538335-mmu2-tube-feeder-for-the-prusa-enclosure-with-hone Since I was upgrading to the MMU3 I decided to take another look…
This was the original description ronsprenkels had for his model: My take on a angled filament feedthrough for my filament drybox. I printed a few others that are available here, none were completely to my liking. So I took the…
