Wyniki wyszukiwania: filament

Sortowanie

21 210 modeli

P
PrintablesExtrutim

Filament Clip | Grandma's Favorite Filament Clip

A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…

Pobrania
156 666
Polubienia
33 561
Ocena
4,86
P
PrintablesJernejP.

Bed scraper - fast print 15min - minimal filament usage 3g

Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)

Pobrania
39 451
Polubienia
3967
Ocena
4,78
P
PrintablesSeemomster

Filament samples - 42 materials

A remix of the model Filament sample with box from Zahg . If you need the case for the samples, in the original model includes a great one. Direct downloadlinks for case : box_ top _ pla _v2.stl , box_ top _ petg _v2.stl , box_ top…

Pobrania
26 193
Polubienia
11 129
Ocena
4,96
P
PrintablesPomi

Filament Cutter 45°

Print No supports needed. Tested with PETG and PLA. Material One segment from snap-off blade 18 mm ( example 1, example 2) 2 pieces of screw M3 x 25 mm 2 pieces of ball pen spring (probably 20 mm length, 4 mm diameter, M3 screw must fit…

Pobrania
22 191
Polubienia
12 904
Ocena
4,87
P
PrintablesK2_Kevin

Filament Clip - K2 Clip

K2 Clip The K2 Clip is a unique design with multiple locking points. No matter what, there will be a locking point facing up. The clip can be left to "float" on your filament spool while printing. Extra secure storage using the locking…

Pobrania
18 231
Polubienia
3121
Ocena
4,82
P
PrintablesArea51

Filament Splicing Jig (Remix)

Always wanted a simple tool for joining filament pieces together - when the spool runs low or to join DIY multi color filaments ( Easy Multi Color Filament ). I remixed LoboCNC's fine Filament Splicing Jig : Added compliant hinge to make…

Pobrania
12 076
Polubienia
1867
Ocena
4,72
P
PrintablesART TOO

SPOOL GAUGE - FILAMENT TESTER - (Tested)

A volumetric calculation was used to determine the precise placement of the lines, as the spool diameter decreases more rapidly when it’s nearly empty than when it’s full. Three versions have been uploaded: Version Description Percentage…

Pobrania
8171
Polubienia
2370
Ocena
4,88
P
Printablesvivamus3d

Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)

The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…

Pobrania
6407
Polubienia
360
Ocena
4,89
P
Printablesishikawats

Filament Quick Clamp V2

This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…

Pobrania
4877
Polubienia
1928
Ocena
4,81
P
Printablesprntmkr

1€ Trolley Coins - Filament friendly

Intro Never worry about forgetting your coin again! This 3D-printable 1 € trolley coin lets you unlock supermarket shopping carts without needing real money. It’s designed to be easy to print and uses less filament than most other trolley…

Pobrania
4672
Polubienia
1040
Ocena
4,95
P
PrintablesDET-Man

PTFE Tube Cap with Filament Label

This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. When building my filament…

Pobrania
3997
Polubienia
134
Ocena
5
P
PrintablesTocache

Another roof filament spool holder

This is my own design for a filament spool holder to be put on a roof or wall. UPDATE 07-26-2019: Added version 2, beefier build UPDATE 04-15-2021: Added version 3, more beefier build and extended the base to reach the mount screws more…

Pobrania
3575
Polubienia
343
Ocena
4,82
P
PrintablesCodeName X

Shoe organizer_Less Filament. More Power. Fits All shoe Sizes.

<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…

Pobrania
3536
Polubienia
1114
Ocena
4,9
P
Printableskennyd1gital

Filament Spool Desiccant Canister

A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…

Pobrania
3294
Polubienia
432
Ocena
4,93
P
PrintablesMolodos

Filament Samples | Filament Color Swatches

Box for multiple Samples: Check out here Smart Version with NFC: Check out here This filament samples are designed to show many features as well as having a space for information about the filament Features Thin walls test (3, 2, 1.5,…

Pobrania
3262
Polubienia
993
Ocena
5
P
PrintablesBeaver

(OBSOLETE) Reusable Filament Spool - Inland compatible

Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…

Pobrania
3158
Polubienia
199
Ocena
4,4
P

ROSA3D FILAMENTS MASTERSPOOL - REUSABLE REFILL DISCS COMPATIBLE WITH AMS

COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…

Pobrania
3120
Polubienia
182
Ocena
4,95
P
PrintablesAlex Ward

Prusa MK3S/MK3s+ Reverse Bowden filament Sensor Cover

Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…

Pobrania
3074
Polubienia
411
Ocena
4,96
P
PrintablesClement

Your Color Change Buddy - dual color print filament manager

EDIT : I've added a tighter version of the grip. I'd recommend to try first with the normal version first as it is working perfectly for me and most users, but if you find the grip is too loose you can try the tighter version :) Hi !…

Pobrania
2805
Polubienia
1185
Ocena
4,88
P
PrintablesFrasse16

Filament Spool holder

The PERFECT filament spool holder This spoolholder is very efficient and easy to use and print. One side uses only two different 3D-files printed twice, two 608 bearings and two M3 bolts and nuts. The spoolholder is very sturdy, it keeps…

Pobrania
2437
Polubienia
495
Ocena
4,92
P
Printables3D-Print Brehm

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Pobrania
2360
Polubienia
399
Ocena
4,33
P
PrintablesPeopleware

Präziser Filament Aufwickler (opt. Akkuschrauber und Motormodul) - Filament winder with opt. cordless screwdriver

Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…

Pobrania
2224
Polubienia
321
Ocena
4,8
P
Printablesakamaka

1.75mm Filament-Splicer-Guide Print-in-Place

Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…

Pobrania
2193
Polubienia
222
Ocena
4,27
P
PrintablesEric T

Inland Reusable Filament Spool v2

Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…

Pobrania
1984
Polubienia
153
Ocena
4,73
P
PrintablesHaprog

Filament dryer extension for SilverCrest dehydrator

This is an extension piece for SilverCrest food dehydrator (SDA 350 A2) bought from Lidl Finland in 2019. Apparently this also works with a similar looking 2020 dehydrator model from Aldi Süd (Germany) according to a comment . I made this…

Pobrania
1661
Polubienia
254
Ocena
5
P
PrintablesThomas Mergan

Ultimate Filament Sample (with storage box)

I made this filament tag which tells you a lot about your filament. Features: The idea for the thin walls test actually came from Mildly_Admirable and his Filament Swatch . There is a key ring hole included but it can also be glued to…

Pobrania
1647
Polubienia
486
Ocena
4,84
P
Printables3Demon

SpongeBob filament dust filter

Dust filters are especially useful if you have some dusty spools of filament that you want to print from or if you have pets at home. It protects your nozzle from clogging. This model prints without supports (even the nose was printed…

Pobrania
1586
Polubienia
392
Ocena
4,97
P
PrintablesGuillaume3D3

PET Bottles to PET Filament - Give Me Bottles ! / GMB Project

Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…

Pobrania
1448
Polubienia
1108
Ocena
5
P
PrintablesmisterT

MasterSpool - DAS FILAMENT Edition V3 - Optimized Print

Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…

Pobrania
1443
Polubienia
135
Ocena
4,88
P
PrintablesAUGU5TO

Calibration Cube - wall thickness - new filament - extrusion

Description This is a fast and easy to print model to calibrate your new filament. It can be used to find the right settings for the extrusion factor to get the right wall thickness. It is designed with a 0.86 mm wall thickness to meet…

Pobrania
1267
Polubienia
89
Ocena
4,95
P
Printablesalleycat

Bambu Lab X1 Filament Profile - extrudr greentec pro

To add the filament profile to Bambu Studio, follow these steps: 1. Download the .zip archive - the .gcode file is empty and can be ignored 2. Extract .json file from zip archive 3. Open Bambu Studio 4. Go to File →import→import…

Pobrania
1134
Polubienia
47
Ocena
4,67
P
Printablesplmetz

Elegoo Neptune Filament Clip - Color Change Buddy

Remix of the awesome color change buddy by Clement to fit the Elegoo Neptune 3/4/pro family of printers. There are files included that have so far been tested on the Neptune 3 pro, Neptune 4, & Neptune 4 pro. If you find it works on other…

Pobrania
1121
Polubienia
212
Ocena
4,77
P
Printablesmp42

Drybox filament guide using PTFE tube

Just print with normal settings (0.20), PLA or PETG would be fine. The only other material needed is a piece of standard PTFE tube. Added sliced files for PLA and PETG

Pobrania
1071
Polubienia
175
Ocena
4,96
P
Printables_Alexis_

Triangle Filament Clip

Triangle Filament Clip (Based from K2 Clip) The clip can be left to "float" on your filament spool while printing. Three identical anchor points to facilitate the installation of the clip. The solid form is easier to print if you have…

Pobrania
1005
Polubienia
130
Ocena
4,96
P
PrintablesSkalouEe

Filament guide for Ender 3 v2 (Hexagonal pattern)

A simple filament guide that I created for an ender3v2. It slide in the top V-rail

Pobrania
954
Polubienia
89
Ocena
4,95
P
PrintablesNils Kal

Prusa i3 LED Lightbar with Filament Guide MK2 / MK3 / MK3S - Single Piece

Here is my design of a Lightbar for the Prusa MK2* & MK3(s). Features: LED's directly powered by the printer Wiring running inside the mount Integrated filament guides for both spool sides On/Off switch Directly wired to the Einsy board…

Pobrania
943
Polubienia
226
Ocena
4,75
P
Printables3DPrintscher

SUNLU Refill Spool (V2) Adapter for Recyclingfabrik Refill Filament

Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…

Pobrania
917
Polubienia
152
Ocena
5
P
PrintablesDombi3D

MMU2S filament buffer upgrade for Samla 22l Drybox.

With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…

Pobrania
896
Polubienia
351
Ocena
0
P
PrintablesOestle

IKEA 365+ 10.6l Filament Storage & Dry Box

Modular filament storage & dry box using the IKEA 10.6l containers that can fit 2 spools of 1kg filament. All the parts for one box fit on the buildplate of the MK4 and can be printed at once. Currently for storage only, but that's all i…

Pobrania
895
Polubienia
201
Ocena
4,89
P
PrintablesDarkmoon

Sunlu S2 Filament Dryer PTFE Tube

Sunlu S2 Filamenttrockner PTFE-Schlauch PTFE Tube für Filament, was sich in alle Richtungen bewegen kann, kann erstellt. der Adapter nimmt einen PTFE Schlauch 4x2 mm auf. Dieser wird ca. 5cm ins innere geschoben und ca. 10 cm bleiben…

Pobrania
873
Polubienia
138
Ocena
4,96
P
PrintablesGoddchen

3D Printing Filament Scrap Container / Bin

I wanted something to collect all my supports and other filament scraps. It has a small opening slot at the top that makes it easy to just drop the scraps in there but keeps the unfolding filament from splashing back out 👌 Print…

Pobrania
871
Polubienia
81
Ocena
4,9
P
PrintablesLSChyi

eSun eBox filament dryer guide tube

This is an improved guide tube for the eSun eBox filament dryer. The original one is made with rubber and can not hold the guide TPFE tube firmly. I break one, thus I create a enhanced version of it.

Pobrania
849
Polubienia
97
Ocena
5
P
PrintablesK-Med

Parabolic Filament Spool Roller

A parabolic filament spool holder/roller. Just set it and forget it. The parabolic design of the roller keeps the filament reel centered. Requires 4 skateboard bearings (i.e., 608zz Double Shielded, 8x22x7), and snaps together. I grew…

Pobrania
847
Polubienia
116
Ocena
4,94
P
PrintablesMichal Fanta

Filament buffer for Original Prusa i3 Multi Material upgrade

This filament buffer is placed between filament spool holders and Multi Material Upgrade for Original P313 MK3/S. Prevents tangling of returning filaments during color changes in multicolor prints. It can be placed on a table or mounted…

Pobrania
813
Polubienia
137
Ocena
4
P
PrintablesEric T

Inland Reusable Filament Spool

Please see my updated model @ https://www.printables.com/model/162440-inland-reusable-filament-spool-v2 Created this to minimize filament and shorten print time. Can be used on rack or roller style spool holders. There are 2 versions of…

Pobrania
794
Polubienia
55
Ocena
4,83
P
Printablesfly

Spool Box - "Das Filament" spool

Spool Box - "Das Filament" spool - Use M2x6 Screws with holes direct beside the outer ring.

Pobrania
776
Polubienia
196
Ocena
5
P
PrintablesvmLOGIC

Filament samples (f3d file)

I love Seemonster's filament pattern. They are reduced to the essentials and are not at the same time printer tests, which some others make of it. Thanks for that! :-) But I wanted to design the printed texts myself. No stickers, no…

Pobrania
735
Polubienia
121
Ocena
4,96
P
PrintablesAndreas Otto

Ender-3 V3 SE Ball Joint Filament Guide Shorter 1-piece print

Printed in PLA Plus, .2mm layer height and organic supports

Pobrania
686
Polubienia
59
Ocena
5
P
PrintablesKameo

Prusa MK3S Reverse Bowden and filament cleaner

Simplistic reverse Bowden with an integrated cleaner (sponge) space on top of the extruder. Print instructions Category: 3D Printer Parts Print Settings Printer: Prusa MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15%…

Pobrania
663
Polubienia
70
Ocena
4
P
PrintablesSaphir

Filament Clip | Saphir's Favorite Filament Clip

Can we make the best just a little better? Yes - we make it a bit simpler, easier to use and add some grip! My favorite filament clip until today was the “Grandma's favorite filament clip” by Extrutim . There was a thing I did not like:…

Pobrania
649
Polubienia
118
Ocena
5
P
Printablesclovisd

Filament Sample Box w/ Infill, Fill Patterns, and Finish Types [REMIX]

This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…

Pobrania
623
Polubienia
150
Ocena
5
P
PrintablesA2S_dESIGN

3DBenchy filament clip

A clip to hold the filament on your spools and prevent it from getting tangled. When we put this clip from the famous 3DBenchy on the spools we can appreciate the color and finish of the filament after printing.

Pobrania
612
Polubienia
329
Ocena
2,83
P
Printablesmcfada

PTFE Feedthrough with Debris Filter for Airtight 3D Printer Filament Dry Box

Intro This is a 2 piece dry box feedthrough with threaded connection to 4mm push-to-connect fittings. There is a recessed area to add a piece of foam to scrub any debris from your filament before it reaches the extruder. Files are…

Pobrania
589
Polubienia
121
Ocena
5
P
Printables3D KIMBA

Spool Wind Spinner: Another Way to Recycle a Filament Spool

Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…

Pobrania
589
Polubienia
294
Ocena
5
P
Printableszuberio

Print-In-Place Filament Filter

A print-in-place filament filter that hinges open/closed and has a slide locking mechanism. No supports 0.2mm layer height 0.4mm nozzle 15% infill PLA Designed for two 7mm thick foam pads that are cut to 15mm wide by 25mm long.

Pobrania
587
Polubienia
93
Ocena
4,78
P
Printableskentnek

Humidity Sensor Holder for Sunlu S1 Filament Dryer

I like the idea of varstef75's sensor holder, however the curved hanger is unnecessary thick and the sensor frame is a bit too small. So, I redesigned it from scratch, using half of this holder instead, which should fit the sensor easier…

Pobrania
585
Polubienia
119
Ocena
4,93
P
Printables3Dubbz

Miami Dolphins Logo with Filament Change

Miami Dolphins logo (200x150mm) that is designed for 2 filament changes allowing for all three main colors. This model was designed for 0.20mm layers with M600 layer changes (in the STL file) at layers 10 & 18.

Pobrania
550
Polubienia
41
Ocena
5
P
PrintablesElektroarzt

Vacuum helper disc for filament dry bags

Simple but effective disc for usage with filament dry bags. I always had difficulties in using the pump right in the first attempt. Just put one disc with the filament in the bag and exhaust the dry bag manually or with a battery pump…

Pobrania
546
Polubienia
82
Ocena
4,85
P
PrintablesArea51

Prusa MK Filament Guide Dust Clearner for ClipOn base

This is a simple filament dust collector/cleaner for the Prusa i3 MK Filament Guide ClipOn base. Fits all Prusa i3 MK frames. Uses an ordinary household sponge - cut it to a small cube, as shown on the photos. Easy to replace when needed.…

Pobrania
532
Polubienia
67
Ocena
4,78
P
PrintablesMaker Lab

Filament Spool Rack

🇬🇧 This is a very simple filament spool rack. You only need two wooden rod (⌀ 18mm diameter) between the printable ends. Also, you can print the included small horizontal supports to avoid rods bending with tender wood. I printed them in…

Pobrania
530
Polubienia
99
Ocena
5
P
PrintablesMarcinPaska

Filament Holder Compatible with Skandis Boards

This is the first prototype of a 3D-printed filament holder designed for mounting on Skandis perforated boards. The model consists of interlocking parts, including a main bracket, a spool mount, and a locking clip. The design allows for…

Pobrania
506
Polubienia
262
Ocena
3,5
P
PrintablesNiels

Filament guide for Prusa i3 MK3S+ and Polymaker Polybox drybox Edition 2

Bought the Polymaker Polybox drybox Edition 2 to keep my filament dry. The box comes with some plastic tubing with a 6mm outer diameter to guide the filament to your printer but no way to mount it your printer. Searched a bit for already…

Pobrania
434
Polubienia
62
Ocena
4,46
P
PrintablesAryser

Anti Tangling Filament Clip ary-v2

Filament clip to fix the filament on spooles not in us. Prevents from tangling. it is fixing the filament with a five fold gripping mechanism You need 1 clip for each role not in use! For rolle wall thickness 2mm 3mm (Prusament PLA) 4mm…

Pobrania
430
Polubienia
83
Ocena
4,87
P
PrintablesTwirlygrlandMom

Flip Flop Sandal Summer Earring Set - Gcode included for easy filament change two-tone design, dangle earrings for summer

Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…

Pobrania
386
Polubienia
90
Ocena
5
P
PrintablesArea51

Filament Spool Holder, Prusa Mini Upgrade

With my Prusa Mini followed a simple filament spool holder that needed adjustment when using a spool with different width. My solution is a new simple and compact small spool holder, easy to bring with you and not needing adjustments for…

Pobrania
382
Polubienia
80
Ocena
4,93
P
PrintablesStefano Vartolo

Sunlu Filament Dryer humidity sensor holder

I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…

Pobrania
375
Polubienia
78
Ocena
4,63
P
PrintablesLeokaldzik

Filament connector, Filament splicing | enlarge your big black filament roll

Do you have a problem with loose filament ends? Change it now!!!! This tool will help you connect the fibers. Just insert two tips, heat with a soldering iron or lighter and connect. (Can be cleaned with a knife)

Pobrania
369
Polubienia
45
Ocena
5
P
Printablespfelecan

Tray System for drying Silica Gel in a Creality Space Pi Filament Dryer or a Creality Filament Dry Box 2.0

The generic purpose of this tray system is to regenerate silica gel with indicator, after losing its absorption capacity, in a Creality Space Pi Filament Dryer or in a Creality Filament Dry Box 2.0 (this was suggested and modified by…

Pobrania
354
Polubienia
77
Ocena
4,67
P
PrintablesFengshie

Kingroon kp3s filament spool holder

holder 1 and holder 2 is table, that used rails of stock kit for thin spool and it is foundation of holder 3 for holding spool anything width. mod2 folder include parts for narrower spool filaments.

Pobrania
349
Polubienia
42
Ocena
5
P
Printablesmchangcreative

Remix of EIBOS Series X: Easdry Upgrades (for filament spools <80mm wide)

This is an 80mm sizing and remix of joaolsneto 's EIBOS Series X: Easdry - Upgrades - Fusion 360 Parametric model . The original modeling of the EIBOS dryer and design of the extension components is a near work of art, but it requires a…

Pobrania
342
Polubienia
98
Ocena
4,71
P
PrintablesMakkuro

Prusament filament swatches / samples

These are my Customizable Filament swatches , customized and ready-to-use as STL for all filaments available from Prusament (all colors, all materials). Use them to know the colors you have on spool at the moment! This way you don't have…

Pobrania
335
Polubienia
64
Ocena
4,89
P
PrintablesPHILTUTTLE

MMU3 Filament Feed Tool

I designed a tool to help feed filament through the MMU3. I was getting annoyed with having to loosen the screws to rotate the Idler Body to aid in pushing the filament into the Front PTFE Tubes. Super quick print, I went with 0.2 layers,…

Pobrania
331
Polubienia
110
Ocena
5
P
Printableslord_edel

Filament efficient pen tray (19g)

No supports needed. When printing on the Prusa Mini, rotate the model 45°.

Pobrania
331
Polubienia
62
Ocena
5
P
PrintablesAtelier CK

Pixel 9a phone case for PLA/rigid filament

Minimal, snap-on case for Pixel 9a designed for rigid PLA. Combines a 25% gyroid infill with 4 perimeters for flexibility and strength. Snaps on easily, stays on well, removes and reattaches without damage to phone or case. Prints in 1…

Pobrania
323
Polubienia
19
Ocena
4,2
P
Printablespaul020559

Filament Clip (Universal, Remixed) for Thicker Walled Spools

Same as original remix but for spools with thicker walls (thanks to WhatWouldAnEngineerDo for pointing out that cardboard spools are a bit thicker). The first remix is at:…

Pobrania
321
Polubienia
56
Ocena
5
P
PrintablesPrintmajstr

Dart Vader OILpaint "Filament Painting"

🖼 Dart Vader Oilpaint Art by AI .. "Filament Painting" 👀Preview: 🔧 Printing Settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 🎨 Materials: PLA JakobFIlament Black Transmission Distance: 0.3 PLA…

Pobrania
320
Polubienia
159
Ocena
5
P
PrintablesBTuck

Filament spool desiccant cylinder

I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I…

Pobrania
313
Polubienia
44
Ocena
5
P
PrintablesGhosty1967

Filamentspule (refill)

Filamentspule aus zwei Passteilen für die Aufnahme von z.B. eSun Refill-Filamentspulen. Benötigt werden außerdem: 2 x Innensechskantschraube M5 x 60 2 x Mutter M5 Den Druck habe ich mit den Voreinstellungen 0,2 (SPEED) des Prusaslicers…

Pobrania
306
Polubienia
7
Ocena
5
P
Printablesvolly

Rubber Band Filament Cutter 45°

I love the Filament Cutter 45 from Pomi, but as i try to print it, i found that the needed materials are not as common available as i thought. So i decided to give it a “facelift” with a even easier accessible material: rubber band. Print…

Pobrania
278
Polubienia
63
Ocena
5
P
Printablesalexan_e

Grandma's Favorite Filament Clip - closed version remix

I love the closed version but it wasn't working very well for me mainly because the curve of the filament was causing a jam and the clip wasn't moving freely. I have removed a part of the closed section and this allows the filament to…

Pobrania
268
Polubienia
35
Ocena
4,85
P
Printablesishikawats

Grippy Filament Clip Clamp

This is a variation on previous model Filament Quick Clamp : https://www.printables.com/model/506814-filament-quick-clamp A rubber band powered filament clamp-on to prevent the spool from unraveling This new model is different in the…

Pobrania
268
Polubienia
53
Ocena
5
P
Printableskez

Rear Filament sensor for Prusa XL

I had limited side room but sufficient vertical room for my 5 head Prusa XL, so I wanted to mount the spools above the printer, however the placement of the side filament sensors made this an awkward arrangement. I made the bracket that…

Pobrania
266
Polubienia
98
Ocena
5
P
PrintablesAA

Filament PTFE Holder/Guide M10x1 (2 Versions) MMU2S suitable

Filament Halter für PTFE Schlauch mit M10x1 Gewinde (MMU2S geeignet) Version 1: nur Halter Version 2: mit Filament-Reiniger Halterung Filament PTFE Holder with M10x1 thread (MMU2S suitable) Version 1: only holder Version 2: with Filament…

Pobrania
265
Polubienia
22
Ocena
5
P

Soporte de Filamento Kingroon KP3S PRO

Soporte de Filamento para la impresora Kingroon KP3S PRO, se invirtio el modelo original de https://cults3d.com/es/usuarios/Arts3Dlab para que la bobina quede a la izquierda, no requiere soporte para su impresión, el modelo fue impreso en…

Pobrania
260
Polubienia
18
Ocena
0
P
PrintablesBdaboy

Prusa Mini Filament Sensor Arm for BondTech extruder

Allow Top loading of filament when using the BondTech Extruder. To make this work you will need a M3 x 50mm screw and hex nut. That was the hardest part as finding anything that long took some time. This is the arm only so you will need…

Pobrania
257
Polubienia
59
Ocena
5
P
Printablesalleycat

Bambu Lab X1 Filament Profile - extrudr biofusion

To add the filament profile to Bambu Studio, follow these steps: 1. Download the .zip archive - the .gcode file is empty and can be ignored 2. Extract .json file from zip archive 3. Open Bambu Studio 4. Go to File →import→import…

Pobrania
244
Polubienia
20
Ocena
0
P
PrintablesBTuck

Filament spool desiccant cylinder V3

I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop at for each one.…

Pobrania
243
Polubienia
24
Ocena
4,86
P
PrintablesMLS

Small Spool Adapter for Sunlu S1 Filadryer / Adapter für kleine 250g Spulen im Sunlu S1 Filament-Trockner

Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…

Pobrania
235
Polubienia
45
Ocena
5
P
Printablesbuchnema

Filament Pass Thru / Through for Original Prusa Enclosure

There are a lot of filament pass through solutions here on Printables, but I didn't like how they stick out of the enclosure, so I designed these two fairly flush versions. One is for the mid cover part and the other for the edge of the…

Pobrania
234
Polubienia
59
Ocena
4,71
P
PrintablesSimple3D

SUNLU Filament Dryer Humidity Sensor Holder

I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…

Pobrania
230
Polubienia
54
Ocena
5
P
PrintablesMatthias

Filament Clip Klammer Clamp

Drucktipp: mit 100% Infill drucken PLA funktioniert sehr gut für dickeres Filament kann die Klammer größer skaliert werden

Pobrania
230
Polubienia
17
Ocena
5
P
PrintablesBlissa Studios

Recreator Mk5 powered Filament spool switcher & Winder

update : I have included a pdf in the files to show assembly with renders to help make building this a bit more smooth. Some parts may have changed since I started putting this together. All uploaded parts are the most recent. Recreator…

Pobrania
224
Polubienia
42
Ocena
0
P
PrintablesÖmer Efe TARIM

A extra filament holder for ender 3 s1 /ender3 s1 pro

noozle temperature(first layer) :220 noozle temperature: 205 bed temperature: 60 supports : none rafts : none

Pobrania
223
Polubienia
20
Ocena
4,5
P
Printablesmkosiedowski

Bolt for the filament cutter 45° (instead of M3x25 screw)

This saves you a trip to a hardware store and few cents on the M3x25 screw ;) I really liked the design of the filament cutter, but it required two M3x25 screws which I did not have. These screws were also unavailable in the nearest…

Pobrania
220
Polubienia
27
Ocena
5
P
PrintablesCross4577

Geeetech filament spool adapter

I have 2 geeetech 3D printers and ordered a few rolls of filament from them. After getting them and putting on the printer I soon realized that the outside of the roll would rub on the extruders and cause it to jump at times because the…

Pobrania
212
Polubienia
8
Ocena
0

Ukraine Seal Ornament - 2 color w/filament change

Included the solid and 2-color version with 1 filament change built-in. Print your favorite.

Pobrania
207
Polubienia
84
Ocena
4,75
P
PrintablesAllMight

MTG storage Insert for a Prusament Filament Box

Good day fellow printers! I created this insert that will fit inside of an empty Prusament filament box. I always found myself having a ton of these boxes and one day I put some of my MTG cards inside of one and found out they can fit two…

Pobrania
206
Polubienia
61
Ocena
4,33
P
Printablespressi

Prusa MINI / MINI+ Integrated Filament Sensor

Model update: 30.1.2025 Description update: 10.11.2025 Assembly Notes — Steps That Differ from the Original Procedure Cut the PTFE tube to 27 mm , keeping the original chamfered outer edge . On the freshly cut side, create a small inner…

Pobrania
205
Polubienia
132
Ocena
5