82 modeli
This is my adjustable focusing stick that I use with my fiber laser. The 3mf files include three parts: 10cm wide top end of stick 15cm long bottom end of stick (short version) 20cm long bottom end of stick (long version) The short…
My laser cutter is up on risers for rotary engraving so I didn't feel like laser cutting the ruler, here's a 3D printable version of it.
Introduction: Photographic bellows is a very efficient tool that allows to achieve high magnification ratios with pretty much every lens. Below you can see a gif composed of three images taken using Cosina COSINON AUTO MC f/2.8 135 which…
This is a simple plate that is 3.8mm thick with a little handle on one side. To use it, lower the acrylic guard down onto this plate and tighten the screws. Then the laser will be in focus for the material you are using. I'm not sure if…
Small October 2022 Status Update (original models generated July 2021): I've made a couple of these and they've held up well - after over a year of light daily usage, they still work! This is M42-4-E-Var, a focusing M42-screwmount to Sony…
This is a Focusing handle for Zeiss 80mm V system lens. I used a 4-40 x ¾ socket cap screw along with a standard 4-40 brass hex nut.
This is a focal stick for a 300mm f/theta lens. It has adjustability between 453-473mm, with the nominal focus range of a 300mm lens to be ~460mm. It is more rigid and requires only one M3 screw and nut to solidly lock in place (or you…
DEPRECATED! User @morpion on discord came up with a simpler and more practical idea which is currently published on github here: https://github.com/XVIIarcano/Galileo-Microscope/tree/main/Mods%2FOptical%2FAccessorized%20focus%20knob If…
for use with M65 17-31mm focusing tube, see https://www.printables.com/model/1400453-linhof-617s-iii-lens-super-angulon-72mm-xl as an example I generate common schneider lenses, since their EFL are easy to find. I also provide a hpf…
Recent updates 2026-02-23 : Fixed mistakes in the model. Uploaded new versions of both front and rear parts. 2025-02-12: Added flat sections on the curved front face of the " FSX Focusing Screen Rear " for a purpose of attaching decals…
A Bahtinov Mask for helping with focusing a Hadley telescope. === Update 2023/03/03 === Added a thin edges version that reduces overall thickness to 1.5mm and has angled edges to each slit, in the hopes of making a sharper diffraction…
Important updates 2026-02-27 : Got a new set of helicoid adapters and found that they have around 313 degrees of rotation compared to 167 degrees on my previous ones. So I added"extension" and "max rotation" as adjustable parameters to be…
I never had a lens with a focusing tab and I wanted to give it a try. and inspired by Leica lenses I created a focusing tab for my Helios 44-2. I have to say it was a great improvement to the manual focus experience. It offers additional…
This is a modified version of the standard 19.5 mm ground glass spacer that comes with the Lomograflok Instax Wide Film Back. This should allow you to achieve sharp focus at wide apertures with a Speed Graphic that has a Fresnel focusing…
The frame is printed in PLA with 0.15 resolution (sunlu matte black) while the lock is printed in PETG, because of small walls and mechanical needs. With my printer the frame is a snug fit for the focusing screen, The walls are tapered…
This is an extension focusing knob for laser diodes that are mounted on many small laser cutters/engravers. It makes it easier to precisely focus the laser and protects your fingers from the high-power beam emitted. You can either 3D…
Please have a look at the Vimeo video here . The Escura Hasselback focusing screen spacer & viewfinder holder has a lower height and a tighter fit compared to version 1 . Version 2 is a bit more delicate and should be handled with care.…
Based on original one, for anyone who lost this.
For the Escura Hasselback owner that has a e.g. Hasselblad 500 where you can't use the focusing screen spacer. Glue all the three parts together using Loctite Super Glue Precision. Do you like it? Please consider to buy me a cup cup of…
This is an adapter designed to mount lenses from cheap broken Point & Shoot cameras on rangefinder cameras that use the M39/LTM mount like old Leicas. The design is printed in multiple parts which are correctly oriented for ease of use.…
use standalone focuing screen (max size 58x58mm). Recommand using CFML hasselblad focuing screen
Since the series 1 included a practical holder for the focusing aid and the new series does not - here is an easy to print part which can be attached to the profile with 2 M3 x 8mm screws and 2 M3 T-slot nuts. Simply print upright then no…
Notes: Printing the gears with 0.3mm line width for 0.4mm nozzle. (I have tried the 0.2mm nozzle wiht 0.1mm line width and found no difference.) You should prepare one M4X6 flat head screw for the holder and one M3X6 screw for the little…
This three-part assembly enables smooth, incremental adjustments for optimal focal distance and razor-sharp engraving results. Quick to install and designed specifically for models without front-plate holes, it integrates seamlessly with…
Nachbau der originalen quadratischen Nikon Schachteln für die Einstellscheiben der Nikon F und Nikon F2. Eigentlich brauchte ich nur den Deckel weil einer fehlte, die Modellierung des Unterteils ging dann auch noch mit. Zur Verfügung…
Dieses Modell wird als Ersatzteil genutzt um folgende Flux Laser zu fokusieren: Beamo Beambox Beambox Pro --- This model is used as a spare part to focus the following Flux lasers: Beamo Beambox Beambox Pro
This is a ring to mount a Copal 0 (or similarly sized lens/shutter combo) to one of the M65x1 focusing helicoids. Did not think 3d printing such fine metric thread would work, but it does. Printed with 0.2mm layers, and a 0.6mm nozzle…
Layer: 0,2mm; infill: 50% Parts used: 2 x mini N20 motor + some wires 2 x 688ZZ bearing 2 x 6mm rod (i've used aluminium rod about 25cm) 1 x 5mm threaded rod (about 3cm longer than 6mm rods) 2 x M5 bolts (min 35mm/max 50mm) 5 x M3 nuts (2…
This tool is designed to allow you to easily focus the lens on the camera without having to remove it from the camera mount. It also does not obscure your FPV view while it is attached, so you can pop it on and use one of the arms to…
There are a variety of old ultrafast lenses cheaply available. These lenses, usually marked between f/0.75 and f/1.6, typically have no aperture iris, no focus mechanism, and a giant external screw thread intended for mounting. They…
First, I recommend you to view the video by Yodayoungling (John-Michael Mendizza). The video explains the Hasselback Instax back made by Escura and the challenges you may have with it, but also what can be done about it: The three files…
Print face down, no adjustments to model should be necessary unless your printer requires them.
This is a Bahtinov Focusing Mask for a Stellarvue F50 Guide Scope. This greatly aids manual focusing by using three angled diffraction spikes to accurately focus.
Magnetic Extendable Focus Knob Replacement My primary motivation for this model was to print my own knob with slightly less-aggressive knurling, as I found that my thumb and forefinger were basically shredded after any small amount of…
Need Brace x3 Side x2 Focuser x1 Prints under 10 minutes. Easy to press fit together. Fits in original package. Works very well. I am using it for the iMicro Q2. Category: Engineering
This is a Bahtinov Focusing Mask for a QHYCCD miniGuideScope. This greatly aids manual focusing by using three angled diffraction spikes to accurately focus.
Stift zur Entriegelung von Sucher und Mattscheibe an der Nikon F und der Nikon F2. Druck aufrecht stehend, mit Brim damit der Stift nicht umfällt und eventuell organischen Stützmaterial für die Öse. …………………………….. Pin for unlocking the…
This is a Bahtinov Focusing Mask for a Stellarvue SVX070T-LE Telescope. This greatly aids manual focusing by using three angled diffraction spikes to accurately focus.
I got this lens for a good price but the focus tab was missing so I design this replacement. There are two variants to chose. *Added this panorama mask for 35mm film Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No…
This thingy lets you focus Disco camera lens by screwing it in and out like on a normal camera. Works if your Disco lens has threads on it. That seems to be common but who knows. Refer to Youtube for instructions on how to remove the…
FR Déflecteur pour ventilateur de 120 mm pour concentrer le flux Respectez le modèle en fonction du sens de rotation, voir image. EN 120 mm fan shroud for focusing airflow Make sure to select the correct model based on the direction of…
额外需要M3x12平头自攻丝x2 M4x27沉头螺丝x2
For use with Butler Creek Size 07 "Flip-Open Scope Cover - Objective Lens" (Model 30070) Helps align a 1/4 drill bit to properly center the bit. I have only printed once and the hole is just slightly too small for my bit and required…
BOM Printable Parts x 1 set of 3 M6x100 socket cap screw x1 M2x8 self taping scew x4 M6 Locknut x2 M6 Flat Knurled Thumb Nuts x1 M6x3(thickness)x11(Height) Squace nut x1 m5x16 countersunk hex socket screw x1 20M5 ROLL IN T-NUT W/SPRING…
Schachtel mit Deckel für die Einstellscheiben der Nikon F und Nikon F2. Es empfiehlt sich, die Einstellscheiben mit einem kleinen Plastiksackerl oder einem Papierstück einzulegen, damit die matte Seite der Einstellscheibe nicht am…
This is a model I designed for a friend who was using a FLIR Vue Pro IR infrared camera to film hummingbirds for biological research projects. The camera itself is more designed with airborne applications in mind, so the camera is pre-set…
For all the owner of this module, the shim has a 45mm length, which is the focal lenght of this model. Then you have 3 heights 4mm, 5mm, and 7mm to adjust the laser height when you want to cut deeper things.
This is a sliding clutch that retains manual focus on your 6SE telescope when using a automatic focus motor. Slide the large outer ring off one side of the splines to disengage the motor and manual focus your telescope. This is for a…
simple laser cut jig to allow quick and precise adjustment of laser cutter bed height for focusing use the spreadsheet to adjust parameters main parameters are focusing distance (bottom of cone to top of laser honeycomb bed) and acrylic…
Simple tool to quickly refocus your laser cutter if it lacks other means of automatically setting its Z height. No need to put anything under lens, so no risk of ramming! Just add an M3 bolt (at least M3x6) and two M3 nuts and set desired…
This is another filament swatch focusing solely on transparency. It starts at 0.2 mm and grows by 0.05 mm in a total of 9 steps up to a thickness of 0.6 mm. If you find yourself trying to design the diffuser for a lamp this swatch will…
This is a focusing tab for the manual focus camera lens TTartisan 23mm f/1.4 The ring fits snugly over the focusing barrel and aligns with the grooves for a secure fit. It has a little lip so that it fits into place and doesn't move too…
Print in TPU and slide over the focusing rubber ring. It should be a tight fit. I measured the external diameter of the lens' focusing ring at 64mm. This might fit other lenses with similar dimensions.
BOM 8015 24V fan 4 x M3 heatset inserts (5mm OD) 4 x M3x20 mm screws (such as ISO 7380) Optional: 4 x Rubber Screw Damping Nail 1 x 90x90 mm nylon computer case fan dust filter Printing For focused duct use a heat-resistant material. ASA…
Needs a pair of M3 screws, roughly 10-12 mm but anything close to this length will probably work. I only know that it fits F4 focusing screens, others might fit but no idea. Tighten the screws until you reach a point where you are happy…
Focusing Tab for the Voighländer Color Scopar 2.8 35mm The ring locks into the jimping of the lens
As I was looking for a ground glass focusing loupe for large format photography, I came across the PEAK loupe 1975, which is very well-designed and reasonably priced. But the loupe was missing an option to attach a strap in order to wear…
This focusing jig is designed to give granular control over the height from the work piece. It can also be used as a thickness gauge for the material to be cut. You will need: 1x Base 18x Shim 1x Covershim 1x plastic threading or Wood…
This is an adapter designed to replace the focusing helicoid block on Mir-1 (Мир-1) and Mir-1V (Мир-1В) lenses with a variable-distance focusing macro extension ring. Once, I tried to unscrew a seized adapter from my favorite white Mir-1…
Super basic laser focusing screen to set your laser proper distance for optimal operation. I bought my laser used and it
Adventurer3のワークサイズ150mmに合わせたピント合わせと画角調整用の高さスケールです。 10mm間隔で穴が開いていて、50mm間隔で大きな穴が開いています。 タイムラプスの撮影にご利用ください。 A height scale for focusing and adjusting the angle of view according to the work size of 150 mm of Adventurer3. There are holes at…
Sliding cover for a 50mm ring / 25mm arbor microscope focusing rack when used in reverse operation . Intended to reduce dust accumulation and direct contact with the rack's grease. Comprised of two parts: a snap-on mount (attaching to the…
This knob will fit onto the focusing lens for any generic manual focus webcam type out there, because the stock ‘elegant’ plastic won't help a lot, I designed this so the knob will grip firmly to the lens barrel. This should also fit onto…
This adapter enables focusing for lenses that lack a built-in focusing ring and have a flange focal distance of 28.8 mm, such as: Industar-50U 3.5/50 Industar-96U 3.5/50 Vega-11U 2.8/50 For lenses with a 50mm focal length, the minimum…
I needed this jig to help focus the Ember calibration camera at a 30-millimeter distance. I printed a head test on a piece of paper, I then used a glue stick to adhere to the jig for a focusing pattern. This little jig worked perfectly.
Make a statement at your next convention with this Bahtinov Focusing Mask, 8 Inch Telescope, Astrophotography Focus Aid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Replacement focusing rings for Samyang lens - 85mm and 16mm. Mine went off the lens because of temperature - so I modelled new ones and printed with chinese TPU. Works great!
Focus Stick M3 Heatset Version
Recent updates 2026-02-23 : Fixed mistakes in the model. Uploaded new versions of both front and rear parts. 2025-02-12: Added flat sections on the curved front face of the " FSX Focusing Screen Rear " for a purpose of attaching decals…
Mamiya Universal Focusing Screen to babygraflok Conversion
Super basic laser focusing screen to set your laser proper distance for optimal operation. I bought my laser used and it
Important updates 2026-02-27 : Got a new set of helicoid adapters and found that they have around 313 degrees of rotation compared to 167 degrees on my previous ones. So I added"extension" and "max rotation" as adjustable parameters to be…
Make a statement at your next convention with this Bahtinov Focusing Mask, 8 Inch Telescope, Astrophotography Focus Aid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
6x2 bin for Infinity X1 5000L Dual Power Focusing Flashlight
Printed in PLA, sanded lens barrel and glued on with two-part epoxy.
Printed in PLA, sanded lens barrel and glued on with two-part epoxy.
Printed with PETG. Code for controlling the stepper with either a Pi5 or ESP32: https://github.com/chvvkumar/allsky-asi676-focuser
Mamiya Universal Focusing Screen to babygraflok Conversion
Focusing ring to place around the lens focusing ring, I suggest securing it in place with a rubber band or with a little screw.
Please print it in PETG or ABS. Use VHB tape to attach the leveler to your Intrepid camera, and press the attached parts for over 72 hours. You can also modify the design and use screws to install the parts to your camera. BOM: Screw:…
