Liczymy pasujące modele…
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
This is a custom-designed picture frame, available in several sizes and configurations. Each side piece prints individually and connector pieces hold it all together. There are several variations of the connectors depending on how tight…
Model consists of 4 bars (two sides, upper one and lower one) and four connection pieces. The longest one is the side bar and can only be printed diagonally on the bed. Lower bar has two integrated latches that hold the picture from the…
Für meinen Virtuellen Flipper (VPin) habe ich eine einfache und kompakte PC ATX Halterung gebraucht. Es sind vier Druckteile notwendig. Das linke und mittlere hat eine Aufnahme, um das Netzteil darunter festzuhalten. In dem Beispiel ist…
Very nice skull made out of a fine mesh. Can be printed in different scales and used as a coin holder or just an organzin help. Print instructions To achieve high detail, print with a 0.25 nozzle at 0.10 mmlayer height and lightly torch…
You can print and use this to replace existing adjustable bed frame support, which is usually made of weak and thin material. I recommend to glue a piece of rubber to the foot to avoid any noise. 0.3mm, rPETG, 5h.
Modular Picture Frame Kit Update 03/06/2026 The metric frame parts 120mm up to 180mm angles were wrong. They were 44.13 degrees and should obviously have been 45 degree cuts for the corners. Thanks to Frey4cre for pointing this out. These…
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
This has been remixed from https://www.thingiverse.com/thing:1615502 and turned into a picture frame. Parts Needed (4) M3*8 screws Print Settings Supports suggested for the opening of the photo. Layer height of 0.20 mm or smaller. 10%…
Easy to assemble stand for a 4”x6” photo frame. Having a few homemade ¾” hardwood photo frames for 4”x6” photos, it was only natural to come up with a sturdy stand for them. Hopefully these will work for you. The stand’s back is around 6”…
The idea behind this design was to create a photo frame that is as simple as possible while still being unique in its own way. Standard dimensions 9x13cm 10x15cm Updates 26.03.2022 - Added portrait version for the 10x15 Printing details…
I wanted a wall hanging frame for my selfprinted photos wich didn´t need much filament and looks fancy ;) The frame is scalable through the parameterized f3d file. Depending on your printers print quality, the inner frame sit´s tighter or…
Remix of my IKEA Halvklart lithophane picture frame New back design Added more stars New button What you need Printed parts (frame, cover, button) IKEA Halvklart USB LED spolight Don't forget to look at the remixes that use different…
Inspired by https://www.printables.com/model/196949-spider-man-web-only-lets-retract No support needed !
This is a hinge to attach an acrylic glass door to a wooden frame. The provided objects are for a 10mm wood panel with a 5mm acrylic glass sheet, inset by 5mm. The model contains a spacer to compensate for this 5mm inset. If you have…
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.
This is a beefed up Y-axis motor mount for the i3 MK3S with built-in end stop. The advantage of this design is that the linear bearings won't hit the backplate of the frame anymore to mark the back end of the Y axis. Instead, the belt…
NEW MODEL 03/25 with POWER BUTTON on the front ! Improved model with mechanical POWER BUTTON extension on the front. An again improved and redesigned body for better print quality. Fits on building plates of all PRUSA Mk3,MK4, CoreOne or…
Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of…
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
This case mount is a remix of the popular Rpi3b/b+ case by 0110-M-P. Other mounts I found used less ideal cases, and the mounting method wasn't the strongest. This version has all the great features of the original popular case, with an…
A mini brushless drone frame (90mm from motor to motor) that doesn't need any screws - everything is held together with zip ties. The frame is ready for standard 20x20mm flight stacks such as HGLRC Micro F4 V2 and similar. The frame comes…
This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…
Harley-Davidson Poker Chip connectable frame. Great for those collectors! chips are magnetic with thin metal in the middle There are pegs and holes on each side of the pieces to hold them together. These pieces connects together into a…
I broke the frame of my glasses a few months ago, and I've been wearing this 3D printed frame since then. I'm completely blind without glasses so being able to print my own frames make a big difference. Fusion 360 files included so you…
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
In the quest for the most rigid Ender 3 Pro in the land, I stumbled across this model: https://www.thingiverse.com/thing:3343666 from mlynch002 and made some changes. Changes: Repaired and remeshed model Resized Holes to M5 Added flat…
Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…
I personally printed this at .10mm layer height, but any layer height can be used as the details are not too intricate, and the lack of sloped edges means that you will not have to use any filler primer to smooth out the edges. This was…
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
Based on the design from @Kittelot and trimmed in order to fit on the Prusa Mini. I also removed the center of the backing in order to save on material since it was not required. It fits 4x6" photos nicely! Print Settings: Print with…
Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…
This helps stop other cats from stealing food. The size is for average, non-overweight cats. Although a small chonker would probably also fit!
This is the low poly design of the modular lantern LR2268. It builds the project’s base and contains the frame, lid, pole and foundation. Use these with one of the side panel prints to create a small candlelight or a complete lamp with a…
Check out the attached instructions.
This upwards facing picture hook is made for canvas printed posters on wooden frames. They have a closed wooden frame all around and getting them on the wall with a zero gap is difficult with normal picture hooks. That is why I designed…
🔒 Notice of Use This design is for personal, non-commercial use . Commercial use is not permitted, either digitally or physically . 📩 If you would like to obtain a commercial license , please contact me directly or sign up here:…
A Mickey Mouse shaped picture frame. The "portal" diameter is 90mm (about 3.5in) and nicely hold a picture with a diameter of 101.6mm (exactly 4in). I cut my images from a 4x5 printed photo to size using the included "disk.stl" file as a…
It's just a bit of fun. I have designed and printed a pair of glasses frames to suit my glass's lens shape in clear PETG Prusament. I have attached the part models of the frames and arms in a STEP format if anyone would like to customise…
Honeycomb shelf and moss frame
My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…
Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…
Instructions For assembly you first need to print all three parts and proceed with the following steps: Grab the rotary part, an soldering iron and your two M4 threaded inserts. Install both inserts at both sides as seen in this video.…
I shoot a lot of Instax, especially now that I adapted a LomoGraflok back to my Graflex SLR, and I like to scan the film for sharing or before giving away the unique physical copies after shooting portraits. I designed this frame to save…
An open 3d printed frame for Mini ATX (and a bit larger) motherboards. It is sitting on top of the PSU and has 30mm standoff brass spacers to allow for ventilation of the PSU as well as space to hide the cables. It features support for up…
I wanted to have a picture of my family on my desk at work, so I created this simple Instax photo frame. Prints at 0.2mm, no supports, Prusament Galaxy Black PLA. UPDATE: [03.03.2024] V2 Design available with bigger clearance and extended…
A good-looking modular frame. All parts are printable on a 180x180mm bed. If you print just the corner pieces and four joint pegs, you'll get a nice frame for a 4" square picture. To increase the length of any side, add side extensions of…
I needed a bracket to hold some of my pool stuff to the frame and this is what I came up with. I also have the holder for the valves for the pump and such too. It needs to be printed in PETG, ABS, or ASA (for UV protection) I tested PLA…
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…
This print can be used to display award medals on a wall. It consists of two modular parts, a frame and a plate. There are two versions of each. The frame has both a simple version and a version with mounting slots to simplify attaching…
Remix of the very cool model "Wireframe Easter Egg" from Anders644PI (thingverse.com). I cutted it and made a edge to hold an egg. Feel free to decorate the egg and give away to friends as a easter gift. Print Settings Printer Brand:…
I've modified the frame, struts, and axle to simplify part count, printability, and assembly. Main axle and cross struts now all use the same piece, which clips into the frame. M3 bolts are no longer needed for assembly Axle clip is…
English: Picture frame hanger for wooden frames without any hook. Designed to hold picture as close to wall as possible. Use small nails to fasten it to wooden frame. There is a mark in the middle of the hanger. Česky: Držák dřevěného…
I modeld this for my son to play with and as an experiment to check if a glasses frame can be printed. Adjust the scaling get the dimensions right Printing: 0.2 or less layer hight I used black PLA+ No supports needed! Materials: A wooden…
Frame your memories with love using our unique accessory, a heart shaped instant camera frame. Let each photo tell a tale of affection as it rests within the gentle curve of our Heartfelt Memories frame, adding a touch of romance to every…
Very stable spool holder on top of the frame of a MK3. It is a remix of the "Chat Bubble" design by saabotage900. It provides almost vibration free delivery of the filament to the extruder due to the perfect concentricity of the spools on…
Hook for hanging picture frame on wall. Designed to be glued to top back side of frame.
This is a lighted lithograph frame that looks like an old style TV from the 1960s and 1970s, even the early 1980s. Since this looks like an old tube TV it makes a great gift for someone that remembers watching TV on one of these. It…
Build your own heartshaped pictureframe. This cool Kit prints in an hour and can be assembled without glue. Just snap the parts together following this quick guide: For easier orientation of the foot, the is a little extra-heart that must…
I wanted a way to display my 13*9cm photographs that works well, looks cool and obstructs little of the image, so i made this. Edit: As suggested in a comment, i added a version with open sides so you can slide in bigger pictures. It…
This is the frame surround for the star wars wall panels seen at Galaxies Edge. I've included G-code for a low profile version designed to sit flush on the wall and one with space to fit electronics behind. For the internal panel designs…
Print model with PLA, PETG, ABS using 0.2 layer height, 15% infill. I use 0.6mm nozzle but 0.4 will also work. Prints without support. You will need 2 small magnets per frame: 5 mm in diameter and 2 mm thickness. You can get them cheap…
LED Rahmen für Prusa MK3S ohne Werkzeug im Aluprofil einclippen. Ohne Werkzeug montierbar. Print instructions Der Rahmen ist zu groß für das Druckbett. Daher ist der Druck auf Unterteil und Oberteil geteilt (4 Teile). Für den passgenauen…
Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…
Very simple and minimalistic photo frame. For both portrait and landscape use. Update: I have printed couple of pieces with Prusament PLA without any issues. Then I tried PLA from other supplier. Print failed as model fall of the print…
I had some real estate left on the Skadis pegboard and 3 spare wireframe skulls by philnelson https://www.thingiverse.com/thing:1388237 Of course i'm going to the mount skulls onto a pegboard! The adaptor is designed to fit the skull…
See: https://github.com/prusa3d/Original-Prusa-i3/pull/172
This is a remix clamp-style mount designed to attach to the Prusa MK3s bear upgrade or any 2040 extrusion frame. It tightens with a screw and can be positioned anywhere. It provides two mounting holes on the top, two on the bottom, and…
Single hook fits aluminum frames with a 40 x 40 mm, 10 mm T-slot. The test lead folder is placed in the slot and then rotated to hold. It can be made without support if it is printed horizontally.
This organizer frame is designed to secure the Flipper zero wifi module inside a Peli 1010 case. The Flipper zero wifi board should also have a case like these ones to work with this model.…
It's a frame to hold an engraving tool to cut round glass objects. This is the first prototype. I only updated the back-end plate (file "Bottle_cutter_slider_02" and see photos), now it is more rigid but its purpose is not to prevent the…
A simple surface mount ATX PSU support frame. Works well with an EVGA 1000W PSU. Printed in PLA, more infill is better! 6x bolts (I think I used M6) required + ATX PSU mounting screws. Absolutely no warranty implied or given if you use…
To fix the frame with the 2.5" drive, use the original screws that are used to fix the 3.5" drive to the cabinet. K upevnění rámečku s 2,5" diskem použijte originální šrouby které se používají k upevnění 3,5" disku do skříně.
===Update=== Stand added ===Update=== Instax Mini Magnetic Fridge Frames, with an overall thickness of only 3mm. I recomend the textured sheet for a shiny surface finish. The frames can be equipped with magnets (6mm x 3mm x 1.5mm) to…
hey this is for the competition thing but also it's my first design! If you want, I can adjust the camera proportions to work for different photo sizes. It currently only supports 58mm x 58mm but that's just because I shrunk the design to…
This drone really prints and really flys with real store-bought parts!!! Needs: 4x 615 motors. 2x counter-clockwise and 2x clockwise. 1x AIO 1s Flight Controller. (I would like to put a BetaFPV F4 in this drone but I only have a BeeCore…
This 3D-printed IDC box header frame is designed to convert a regular 2-row pin header into an IDC box header. This is a useful solution for those who need to replace an IDC box header but cannot find one in stock, or for those who want…
Its just drone frame with legs. I printed this on 30 x 30 cm table soo it can't fit your table. Make sure that fit.
Simple little holder for instant pictures
This is a clip to hold the filament on the frame of the printer for quickly swap filament color. It needs to be printed on the side with support.
Reinforced inner case for the GoPro carry case there is room made for: — GoPro — 2 Batteries — USB-C Cable — Max lens mod — Floaty mount — Magnetic clip — Screws&mounts
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display SGC graded TCG spots cards wall holder and display frame.
Unfortunately, I don't have enough pictures to fill the box. Please let me know in the comments how many it can fit. You can print it in default settings. In my g-code, I changed bottom fill pattern and angle. It is now Monolitic Lines…
Bill of materials: PETG filament 12 M3x16 (or M3x14) screws mosquito net TPU filament (optional) superglue 2 magnets : 6x3mm Assembly instructions print the parts: assembly the rectangle frame using 4 bars and 4 corners, that snap…
impreso con boquilla 0.8 y capa de 0.40mm
A fun and flirty frame to hold photos and celebrate love. The gcode we included uses supports and brim. Our recommendation is organic supports. Print at .2 layer height, recommended 15-20% infill. Wait until fully cooled to remove from…
UPDATE: 8. August 2026 made Automatic Cassettes available for the buffer UPDATE: 26. November 2024 Adapted the top-buffer-mount for R4 Cassettes (from bluex ) wich has 0.8mm more lenght space and guides to hold it better in place. Now it…
Wanted to hand a 10x12 inch frame picture on my Skadis peg board. So I made this hanger that uses a M3x12 Button head screw for the support peg. Using the M3 screw allows to adjust the length the screw protrudes depending on the hanger…
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…
Webcam Step: Elevate Your View Modern technology has gifted us with sleek, thin-framed monitors. While these technological marvels enhance our workspaces, they also present a new set of first-world problems: webcams dangling into the…
Automatic Z calibration on Voron 0.2! This is a mount for a nozzle wiper and touch microswitch that attaches to the Kirigami bed frame on Voron 0.2 printers. It allows to use the Klipper Z calibration plugin with 0.2 printers. The nozzle…
Calibration Frame to check the internal and external dimensions.
Included are STEP file for your CAD tool, or directly the Fusion files. If you like the model as it is, the STL model files and the Slicer files. As a hint i uploaded also the print code made for a MK4. The board frame is hold by magnets…
Create your own Meme with these picture frames! The text is held in place and you can switch out the picture underneath. Use any old / new printed photo you still have, or print a photo using your Canon Selphy photo printer. Also included…
This is a mount for a camera using a standard mounting screw (1/4-20) that attaches to the top corner of the front 2040 extrusion of the Bear frame. It's designed to put the camera either on the front-left or front-right corner at a…
I made this 4x5 picture frame to display my images. It uses 2mm thick and 5mm diameter magnets. I also created a version which I can use for my large format photography. When the picture is still wet the frame holds it to prevent warping…
After I have downloaded and printed the nice cable cover from John @John_Smith (Thanks a lot). I saw the terrible cable salad behind the display. Immediately I made a Cover for this. Printed with PLA galaxy black, I love it.
