Liczymy pasujące modele…
🔫 Introducing the Bump Stock Extension for Micro Roni Gen4 by Veracon Engineering! Enhance the stability and control of your Micro Roni Gen4 with our custom-designed Bump Stock Extension. Engineered for precision and compatibility, this…
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
The cup holder position on this car didn't allow me to use the standard cup holder extension with my favorite water bottle so I made this. It's not perfect but it's more than good enough for me and holds my water bottle. Might tweak it…
Here is a model for a tool to loose or tighten the nut on an Bosch E-Bike Gen4 chainring. I printed mine in PETG, this is quite sufficient. Due to the fine thread, too high torques should not be used here anyway. Use with an ½ inch…
Due to my wide head the headband cushions clipped out of place. This thing is designed with Freecad 19 and works for my 4. gen Astro a50 Headphones. Issues: After 4 Months of usage the plastic wobbled around so much that it left scratches…
It has a thin “lip” so it can engage fully with the Sram boost chainrings as they have an offset. I can be used with a 3/8" driver. Printed in PETG it is strong enough for the required torque. Print settings Material: PETG Resolution:…
Proved FX Impact Extended GEN4 magazine for 30 x 5.5mm (.22) pellets. You will need to build a suitable spring or adapt one by modifying its connection to the case and crown. A spring of 19 mm x 0,02" is recommended. This model, unlike…
I needed a stand to put my daughters Echo Gen 4 on her Skadis board. I've found a great model for a french cleat here: https://www.printables.com/de/model/495363-amazon-echo-4-french-cleat-hanging-system I have printed the model in PETG…
Magazine Base Plate for UMAREX Glock 17 Gen4 – a precisely designed replacement part for Umarex Glock 17 Gen4 replicas. It ensures durability and secure fit. Perfect for airsoft enthusiasts and replica owners seeking reliable spare parts.…
This is a filler plate for Glock Gen4. Fits my G19, but should fit other Gen4 Glocks as well. I printed this upside down with black PETG. No supports needed. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Simple wall mount for the Micro Roni Gen4 I used 4.5 x 40 mm screws to fix it on the wall. Print instructions 4 walls, no supports, 10% infill.
This model is designed to hold one shelly of generation 4 (may be some of gen3 are fitting, too). The shelly is held in place and can never fall of. Just put it in and slide it to the front (down on my photo). After installing all cables…
This bit holder allows you to attach 3-4 hex bits to your M18 Fuel impact driver. This model will work on both regular (2953-20) and surge (2761-20) version of Gen4 Fuel impact drivers. Includes versions for 3 and 4 slots as well as left…
When I bought my Gen4 Turbo Levo I couldn't find any wall mounts for the charger to keep it off the floor so here you go. The arms can hold both charger cables if needed. Screws: I used SnapSkru SPM Mini #6 I think, but any smallish screw…
This is a replacement part for the Astro A50 Gen4 (A00085) for the right side mount that connects the headband to the headphone slider arm. This model is slightly different from the original mount. It is slightly thicker at the bottom…
If you find my designs useful, please consider sending a tip I recently mounted my GeForce RTX 3080 vertically in my Corsair iCUE 4000X case using the Linkup PCI-E 4.0 Riser Support cable but I was concerned about how much the Riser's PCB…
Mounts are positioned for printing, no supports needed. Examples in pictures are printed using PLA Plus at .28mm layer height and 15% infill. I used 3 mounts total to hold the keyboard. They are designed to fit into the open space on the…
Shelly Gen4 holder for distribution box - can be opened and reused at any time
Trash bag holder for Gen 4 Dodge Ram cubby in the dash. One model if you remove the original insert on the cubby. The other works with the insert in place.
This is a holder for the new AirPods fourth generation. Print it with at least 10% infill and dynamic tree supports. I also recommend a brim for better bed adhesion. Enjoy :)
This little contraption uses 2 zipties to lock itself to the chainring arms and prevent the lockring from loosening. It was designed to fit Sram X-sync2 boost chainrings. I've had this installed for over 100km and seems fine so far. Print…
Ubrgrade for butt stock. The stock can bend so I have made some filing that make it more rigide. They were litle bit bigger so I sended it little bit (around 10 minutes). Than the stock wasn't great. So I have impruved it and make it…
I made those models to help stabilize the GPU and give a solid base for the PCI-E raiser to stand on. It also looks better than the brass standoffs and use m3x6 screws. PCIE-Standoff: Fit flush under the raiser bracket.…
This mount can be screwed or glued to horizontal surfaces. The Shelly Power Strip 4 Gen4 can then be placed in the mount to prevent it from moving around or falling down.
Body: PLA, PETG Legs: TPU
Replacement muzzle for GLOCK 17 .6MM Cal. Some places around me need this to be required to play in games. Modeled For The Umarex Glock 17 GEN4 GBB .6MM Cal. PLEASE DO ANY TOLERANCE TEST BEFORE COMMENTS! I CAN MAKE CHANGES IF REQUIRED.…
Simple angled wall-mount for the presence sensor
Update 2020/05/05 There was a small bug on the original Gen4 ABL mount, that the gantry won't hit the X limits switch. A revised version is updated to fix this issue: Gen4_Stock_ABL_mount_for_dual_5015_Duct_M12_fixed.STL If you have…
Designed specifically to adapt the cup holder of a 2012 CRV to fit large diameter Yeti cups and smaller energy drinks. Has a separate bottom piece designed to be printed in TPU and then glued to the body of the cup holder.
Case for Shelly smart switch allowing mounting to a wall using (M4) screws that are 6 cm apart. Intended for the Shelly side with LED and button facing away from the wall; screw terminals facing wall. Wires ares supposed to hang down.…
Links to Hero Me Gen4 by mediaman https://www.thingiverse.com/thing:3433619 https://www.thingiverse.com/thing:3182917 This is an update version of my previews LED bar mount for Hero Me gen3 ( https://www.thingiverse.com/thing:4254593 ),…
Amazon Echo Gen4 Wall Sconce Style Shelf I wanted to put my Echo on shelf so I drew this up in Onshape and printed it on my Qidi Xplus 3.
Minimalist vertical stands for Thinkpad P53 and X13gen4 - stable and usefull when you want to used 2nd display. I recommned to print it from PET-G. Even though the stand was designed very precisely, I recommend sticking soft adhesive tape…
I made a simple Wall Mount for a Lenovo L13 Gen 4. It should works with other laptops that are not thicker then ~22mm. It is my first Project so it may have some design issues that could be fixed. I printed it on my Elegoo Neptune 3 with…
Boîtier professionnel pour Shelly EM Gen4 – Version Pro
The ThinkCentre Neo 50q Gen4 does not fit in a good way on my desk. I made this stand to put it vertical. All the ports and vent holes are accessible. It is a snug fit and 'clips' to the side of the case. It can be used on both sides,…
TPU protective case for the NITECORE NB10000 Gen4: two versions, one with a MagSafe ring and one without. Printed using Siraya Tech FLEX TPU Air at 70A setting. 2 walls, 15% infill. Prints upright with no supports needed for both…
Alexa Echo Gen4 Stands i made V1 V2 V3 with PLA Filament 1KG https://sunlu.co.uk/products/3kg-pla-plus-matte-pla-filament-bundle-buying-1kg-roll?_pos=2&_sid=6a6a8bda9&_ss=r&variant=50149803819327
The model have 2 shells, so the slicer generates 2 separate parts. I have fixed the model so the slicer doesn't create 2 separate objects. probe offset: X-61 Y-18 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
Replacement strain relief for the Shelly Power Strip 4 Gen4 in case you want to replace the stock cable of the power strip with a longer cable. Print with white TPU.
Soporte impreso en 3D de la familia STANDARD. La descarga incluye la base y la pinza en STL. La variante ocupa 54 mm (3 módulos DIN de 18 mm). Medidas compatibles del dispositivo Compatibilidad física confirmada por el autor: Shelly Plus…
Simple Wallmount for Bosch e-bike Chargers Generation 4 (Performance Line CX).
Blanking Plug For Bosch motor gen4 gen5 Smart System Print in TPU
Remix of Thorvalls Dimm.2 fan mount for the never Dimm.2 H5 Gen4 with the standoffs allready on the board. Adds also space for surface mount components that they dont touch the print. Print with petg the ssd:s and the surfacemount parts…
Caja STANDARD de superficie para alojar los modelos Shelly indicados en la sección de compatibilidad. La base se fija a la pared con dos tornillos. Incluye una tapa para montaje vertical y otra para montaje horizontal; se deslizan sobre…
Screws are M3.
Expositor de sobremesa compatible con Shelly 1 Mini Gen4, con alojamiento para dos casquillos GU10 y tapa inferior para cubrir el compartimento del cableado. Variantes Sin pulsador (REV015): base y tapa inferior. Con pulsador (REV019):…
I made those models to help stabilize the GPU and give a solid base for the PCI-E raiser to stand on. It also looks better than the brass standoffs and use m3x6 screws. PCIE-Standoff: Fit flush under the raiser bracket.…
xTool Ultra F1 Gen4 AR-15 Laser Engraving Jig – 2-Piece Set Upgrade your engraving setup with the next generation of our best-selling AR-15 laser engraving jig. This 2-piece set includes everything you need for precise, repeatable…
Upgrade your AR-15 engraving workflow with the SongDawgDesigns AR-15 Laser Engraving Jig — Gen4 2-Piece Set. Built for repeatable, shop-quality results, this precision jig set holds your receiver steady so you can engrave both sides…
Proved FX Impact Extended GEN4 magazine for 30 x 5.5mm (.22) pellets. You will need to build a suitable spring or adapt one by modifying its connection to the case and crown. A spring of 19 mm x 0,02" is recommended. This model, unlike…
This model is designed to hold one shelly of generation 4 (may be some of gen3 are fitting, too). The shelly is held in place and can never fall of. Just put it in and slide it to the front (down on my photo). After installing all cables…
The ThinkCentre Neo 50q Gen4 does not fit in a good way on my desk. I made this stand to put it vertical. All the ports and vent holes are accessible. It is a snug fit and 'clips' to the side of the case. It can be used on both sides,…
Remix of Thorvalls Dimm.2 fan mount for the never Dimm.2 H5 Gen4 with the standoffs allready on the board. Adds also space for surface mount components that they dont touch the print. Print with petg the ssd:s and the surfacemount parts…
This mount can be screwed or glued to horizontal surfaces. The Shelly Power Strip 4 Gen4 can then be placed in the mount to prevent it from moving around or falling down.
Replacement strain relief for the Shelly Power Strip 4 Gen4 in case you want to replace the stock cable of the power strip with a longer cable. Print with white TPU.
Shelly Plus, Gen3 and Gen4 compatible DIN rail mount. Easy to Print – Prints cleanly without supports Effortless Installation – Snaps onto the DIN rail smoothly. Quick to Remove – Comes off just as easily when needed. Compatible with…
xTool Ultra F1 Gen4 AR-15 Laser Engraving Jig – 2-Piece Set Upgrade your engraving setup with the next generation of our best-selling AR-15 laser engraving jig. This 2-piece set includes everything you need for precise, repeatable…
Upgrade your AR-15 engraving workflow with the SongDawgDesigns AR-15 Laser Engraving Jig — Gen4 2-Piece Set. Built for repeatable, shop-quality results, this precision jig set holds your receiver steady so you can engrave both sides…
Single 52mm gauge pod for the factory defrost vent on the Gen4 Subaru Legacy BL/BP (2003-2009). RHD and LHD versions included. Key Features: - Press-fits into the factory defrost vent - no cutting or glue required - Stealth wire routing:…
Double 52mm gauge pod for the factory defrost vent on the Gen4 Subaru Legacy BL/BP (2003-2009). RHD and LHD versions included. Key Features: - Mounts two 52mm gauges in the factory defrost vent location - Press-fits in with no cutting or…
Triple 52mm gauge pod for the factory defrost vent on the Gen4 Subaru Legacy BL/BP (2003-2009). RHD and LHD versions included. Key Features: - Mounts three 52mm gauges in the factory defrost vent location - Press-fits in with no cutting…
Enclosure for an in-line application of a full-size Shelly device, such as the 1PM as seen in this example, or the Shelly 1 with 37 x 42 x 16mm HWD dimensions. There are also spaces to fit 2 Wago 221 units inside. For the 1PM, you…
