709 modeli
Simple Razor Stand for Gillette Fusion Razor. This is remix from Thingiverse model: https://www.thingiverse.com/thing:4654647 No support needed. Material recomended: PET-G ( PLA, ABS, ASA) Min. layer hight: 0,15
Wydruk około 2,64 €–3,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gillette Fusion Razor Travel Case with Blade Cartridge Storage This compact and practical case is designed to protect your Gillette Fusion razor during travel or everyday use. It closes securely to prevent accidental opening while…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
We have two versions for you here. One is the bracket without holes, here you simply use double-sided adhesive tape to attach the bracket to your cupboard. However, if you want to be on the safe side, you can download the file with drill…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
The Druidic Nwyfre Sigil of Hy Breasil.
Wydruk około 2,35 €–2,88 € nettoWstępna wycena jednego wariantu
This is a protection cover for Gilette Sensor Excel razor blades.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
So I created a remixed model inspired by the original to hold a Gillete Venus razor and hang it on my wire shampoo holder. I didn't want to tape it to the wall or drill a hole, so I designed it to hang on a wire shampoo holder, as in the…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
holds cables nearby. added material to the corners. gcode has supports baked in
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original vessel holders on Agilent 708-DS sometimes break. While it is possible to order original parts, it is costly and time-consuming to replace. Hence the printable Replacement of dissolution vessel holders on Agilent 708-DS…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Posíláš Balík s něčím křehkým a nemáš nálepku: POZOR KŘEHKÉ? Tak to se ti bude hodit moje jednoduchá šablona.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Protective Storage Case for Fragile LED Magnifying Glasses (Electronics Repair Goggles) These low‑cost LED magnifying glasses are handy for electronics repair, soldering, inspection, and detailed work—but the frame and head‑mount are…
Wydruk około 6,90 €–8,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
thanks to the creators of the toast and Eevee models I used to make this! :) also this model has not been test printed yet so print the toast first and do any scaling ajustments needed and if you need to PLEASE tell me what you needed to…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
A powerful tribute to one of the most iconic heroes of the night. This 3D printable bust captures the brooding intensity and timeless elegance of a legendary masked protector. Sculpted in a neoclassical marble style, this display piece is…
This is a digital 3D printable model of Bo-Katan's Mythosaur Sigil Emblem from the Mandalorian series. In season 3, Bo-Katan receives a new shoulder armor with the Mythosaur head sigil. The new shoulder armor STL is a part of the "armor"…
Modelo simple para colgar la maquinilla de afeitar en el baño, con adhesivo de doble cara. Aconsejo limpiar bien tanto la pieza como la superficie con alcohol isopropilico para que el adhesivo funcione y no tocar la pieza con las manos…
Ruby Roundhouse for the Prusaprinter competition. Some company for my Bravestone. I will definitely finish the split version, but due to the deadline I didn't make it, hopefully you will like it ;) JUMANJI !!!
Original: https://www.thingiverse.com/thing:3198581
I've been having fun using Shred-er mags with the Vigilante, but in my shop I'm frequently hunting insects larger than flies. A little more ‘oomph’ would be fun. Current versions: The V10 barrel and V8 cylinder are quite functional, well…
From the Smithsonian 3D Digitization library, I have converted the mesh to STL in Blender. Print with supports with the base of the claw near the build plate, point of the claw straight up. 1:1 Allosaurus fragilis Marsh, 1877: Claw…
Holder design for a Mach3 razor and the expansion tray of extra razors. I printed this from another site download but the site has since gone down so I can't link the credit for the design.
This is a wall mount Gillet razor holder. Hold steady and make no contact with razor head. Water drain easily. Can stick with 2 side 3m tape in shower or wall. Edit : add single (centered), double triple and quad holder. Print Settings…
Simple, snap on travel cover for a Gillette Fusion razor. Print instructions Category: Household Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Filament: Prusa PETG Notes: I'd recommend PETG, since the cover needs to…
Holder for Gilette Venus razor which does not need the razor head for holding. Low profile to allow any water to drain away.
Hello. I have recreated the sign for Luke's diner from the 2000 show Gilmore Girls. The files come with both sides of the sign that hangs outside the diner. Six 10x2mm magnets required for each sign (12 in total), pause mid way through to…
Simple travel blade cover for a Gillette Fusion 5 Proglide Razor, might fit some others The fit is quite firm as is, no other retention method needed as the head has rubberized sides No need for support material, print as is with the…
Recreate a piece of movie magic with this 3D printed Happy Gilmore 2 golf ball prop – featuring a hidden compartment just like in the film! Designed for display or cosplay, this novelty item adds a fun talking point to any collection. The…
I couldn't find a decent cover for a Gillette Mach 3 razor. All of them slid on and in a gym bag would slide right back off again. This one snaps on from both sides and stays on nicely without extra rubber bands/tape/or any other such…
Weather protection with a 3D-printed gill shield (Stevenson screen is a box) for RuuviTag temperature/humidity/pressure sensor. Basically a DIY bluetooth weather station. Keeps the water out yet enables the air and bluetooth to go…
Have you ever wanted to Have the Happy Gilmore Putter but don't want to pay thousands of dollars to get it used? Well do I have a solution for you, here is the real life Happy Gilmore Putter that is scaled up properly to the REAL SIZE and…
This is my “Digilogue Clock”. This uses a ring of 60 LEDs to be able to show the time, syncing with network time. As it uses the WLED firmware it is able to do all the lightshow's that WLED can do and also show the time! The clock can be…
Hey! I am an axolotl! The Mexica (meh-SHE-cah) people named me in Nahuatl, so you can properly say my name as ah-SHO-lotl; “ah” like “aha,” “sho” like “show” but without the “W”, and “lotl” is like “low” without the “W” and then a…
Magilla Gorilla, the star of "The Magilla Gorilla Show" by Hanna-Barbera that aired from 1963 to 1965. Magilla Gorilla is a fun-loving yet trouble-prone gorilla who spends his time languishing in the front display window of Melvin…
Holder design for a Gillette Fusion5 razor and the cartridge refill case
My black print in PLA is strong but was a bit rough testing it; perhaps with no raft this would be the go-to. Yellow images represent an ABS print that was brushed with acetone to smooth it out. Clear is PETG with lots of brim no raft.…
Esta increíble pieza sacada del universo de MY HERO ACADEMIA que viene con el personaje de izuku midoria en su forma de Deku Vigilante. FILAMENTO: PLA
A travel razor guard for the Gillette Venus Comfortglide cartridge razor.
This is a remix of GiovanniMarletta's model https://www.thingiverse.com/thing:2857949 What I done in this version: Longer and wider handle to fit better in the hand Shorter peg so that the blade can flex a little Improved lock mechanism…
"FRAGILE" Stencil for spraypainting or airbrushing boxes or crates. Notches on every side for alignment. also check out my “HANDLE WITH CARE” stencil If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly…
Printed with no top and bottom layers and 15% gyroid infill.
printed in PETG, 0.2mm, 15% infill, with support
I always really need my razor and it's very annoying to put it in the original box every time I have to go somewhere. The original box it's made out of cardboard and it's not strong at all, so I came up with this model for when you need…
Kids wanted Scopes for their Zulu X-Shot Vigilante shotguns, couldn't file any existing ones that would fit, I modified the Nerf scope by @CBuilds, new rail to suit the X-Shot, keeping it support free. Added Cross-Hair, because cross…
The MPO 1400 Purgill-class Star Cruiser is a Passenger Liner from the High Republic Era. This is a model at 1:2,000 scale. It is 150mm long, 50mm wide and 44mm tall. The antennae are printed separately. There is a small notch at the base…
Enjoy... Print Settings Rafts: No Supports: No Resolution: 200 Infill: 5 Notes: no support or raft needed Category: Household
This is a very simple and easy to print travel box Gillette Fusion5 razor. The outside dimensions are 147mm x 47mm. The gap between the top and bottom part is 0.05mm. It works well on my printer setup. If needed you can slightly scale the…
Quick print that solves the problem of razorblade and protectionpads wearing out prematurly. Snaps on to the shower pipe. Mount it high up to keep it out of the water.
Dungeon Masters Screen and Dice Tower. Print instructions OpenSCAD (source) and STL files are available. The entire system as shown used just under a 1Kg roll of grey PLA, plus some black. The tower can be printed with or without the…
This design is based on Jimbo70's Mach3 Razor Travel Case with a few improvements. Changes include: - tighter tolerances (original was 1mm) → snap mechanism works better now - redesigned text (file without text available too) - rounded…
I was designed an Holder for my Gilette razor. There is a Holder for the Gilette Fusion available in Thingiverse, but not for the Power The Link to Thingiverse
Sleek Razor Holder Elegantly holds your favorite razor in a variety of settings Features Stand your razor to free up space in your medicine cabinet, sink, or shower. Wide 25mm (.98") opening accommodates most size handles. Gillette,…
Crosman Vigilante Pellet Clip This clip works the same as the OEM pellet clip and the bug-a-salt clip. Print Settings Printer: Bambu Labs X1C Rafts: No Supports: No Resolution: 0.2 Infill: 35 Filament: Overture PETG Black Notes: Printed…
imprimelo con soporte i con una imprsora que tega un poco de calidad porque tiene bastantes detalles por cierto es en un solo color
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu White…
Gillette Mach 3 handle. Remixed the original to cut down on print time / material. Original File by KikiTay on Thingiverse No supports needed. Layer Height : 0.2mm Material : ANY
Wandhalterung für Gillette Fusion 5 Rasierer
This is a (travel) case designed for the Gillette Mach3 razor. It has included vents allowing the razor to dry. I printed it in matte black PETG to withstand higher temperatures and to provide some impact resistance through flexibility.…
No support needed.
This remix supports Gillette Mach3 razors
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Glue the bar to the glider.Follow the tutorial and then ur done.Its pretty easy. The smaller bar is if the launcher is too small for the bigger bar to fit in. Just put it in the middle of the launcher.
I find the original transparent cover particularly useful when traveling. I needed an extra one, so I took some measurements from the original little cover and I made a similar one. I have used this piece for more than a year and it's…
After traveling with my razor loose in my backpack I decided it was time to create a safety guard ;) Printed in pet-g for longevity. No supports or skirt needed Snug friction fit so it stays attached.
Recorded in full timelapse at https://vimeo.com/514169876 Su is known by many as the one for negotiating peace with Orc Chief Nakhbruh for all inhabitants of the plains and the mighty forests that surround. A quiet and unassuming soul,…
Just a simple Cookie Cutter of the character Gilfi from The Secret World of Santa Claus / Weihnachtsmann und Co KG. If you want to support me creating new models, please consider buying me a coffee .
I found this razor stand for Gillette Mach3 on Thingiverse, but did not find any on Printables. This upload should make it easier for others to find a suitable stand. I am not the original author. Please see the Thingiverse link for more…
Lily Fighter Gil Ready for 3d Printing.
Stick to the shower wall with some double-sided tape.
This standalone Bluegill figure features accurate fish anatomy with smooth flowing fins and scaled body textures. Designed without a base, it makes a charming addition to desktop displays, shelf decor, or freshwater hobby collections.…
"We must walk the way together" - The Armorer Happy May the Fourth! This keychain print was a part of my metalized filament testing. I printed all of these keychains with Protopasta's metal-filled filament. I followed the tutorial on…
This is a highly detailed 3D model of Izuku Midoriya (Deku) in his Vigilante (Dark Deku) form from My Hero Academia . The figure captures the intense and ragged look of the character during the Tartarus Escapees Arc, featuring his…
Print with small nozzle to retain as much detail as possible. Category: 2D Art
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a stand for the King C. Gillette safety razor to stand up and ready to use.
This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!
It's printed upright with a brim for adhesion. Printing it flat also works fine but imo it looks nicer printed standing up. 3M VHB tape is probably an overkill but it works fine for mounting it to the tiles. The filament is PolyTerra…
This is a model for a portal axle style 3D printed gearbox for DIGILENT motors (https://export.farnell.com/digilent/290-006/dc-motor-12v-789rpm-1-19-gearbox/dp/2528804?st=robot ). It's a 3 reduction ratio and fits inside a bigger size RC…
I modeled the equipment to use with a whiteboard when building courses. Scaled roughly for 4ft=1inch scale so they fit on a 18x24in whiteboard representing a 90ftx120ft ring. highly recommended to print equipment on its side rather than…
Family House Sigils From Game Of Thrones Coasters Please See All My Other Coaster Designs Including The Game Of Thrones Quote Set. Some Will Require ‘Print Thin Walls’ On Due To Intricate Details. Please Share Yours Makes And Remixes…
Simple stand for holding a Mach3 razor. Will probably fit other disposable razors. Print it laying on it's back and you won't need supports.
Fast and easy print No support or brim Protects the blade from being damaged in your toiletry bag Protects your fingers from being hurt when you pick your shaver out of your toiletry bag The Blade can dry inside the case If you use…
Gilgamesh Gilgamesh: The Man and the Myth King of Uruk: Gilgamesh was a historical king of Uruk (in modern-day Iraq) in the Early Dynastic II period (c. 2800-2500 BC). He is the central figure in the Epic of Gilgamesh, considered one of…
- easy print / einfacher Druck / jednoduchý tisk - no supports / keine Stützen / bez podpěr Just stick with double-sided tape / Einfach mit doppelseitigem Klebeband festkleben / stačí přilepit oboustrannou páskou
Tensioners for Ender 3 Pro – Precision Made Simple Introducing the GIL tensioner, designed specifically for the Ender 3 Pro with 2020 X rail and 4040 Y rail. Precision is at the heart of this design, with tolerances dialed in to a tight…
These 3 sets of base plates will convert your vintage Fat Handle Gillette Tech safety razor into a Semi-Adjustable razor. The plate sets come in either an open comb, safety bar, or a combination of the two. Each set includes 3 base plates…
no supports needed To fit the cables in, push back the wrap as long as the connector-cover. Start on the “plug end” by sorting the wires side by side und push them into the gab carefully. The wrap of the cable can be pushed into the…
Gilded Age Knob Pull. This would be great printed in Bronze-filled Metal Composite HTPLA. (PROTO PASTA)
This is a faithful reproduction of the Circuit Gilles-Villeneuve. Its dimensions are 20cm long, 6cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it…
scatolina al cui interno si trova lo spazio dove inserire il pod. La scatolina si richiude con un coperchio attraverso una filettatura.
HOn30 Gilpin ore cars, 2 flavors. The trucks have a flat side to the bolster, that goes towards the coupler. Couplers are MTL 1015. I use Eastern Seaboard Models 36" N scale metal wheels in the trucks, but any MTL length axle will work.
Just some funny shoes for dogs inspired by the famous Adilette from Adidas.
Just another travel case for Mach 3 razor. I was not satisfied with existing ones, so here it is. Top and bottom parts stick together. Depending on your printer you might want to tweak tolerance a little (i.e. using horizontal expansion…
Cut 8 pcs 12" long for feet Cut 2 pcs 36" long for posts. Cut 56" pieces for the jump bar. I used hot glue during assembly as well.
Hello everyone it's been a hot minute, but I come with a gift! Vergilius' Sword! Technically this is a spoiler for Canto 6 and Leviathan (RIP) but only if you know already. As of right now, I have a rather large queue of items I want to…
I lost mine and decided to recreate it, I got to the v3 version and it's practically ready even if I'm using glue to glue it properly, the interlocking system is not reproduced very faithfully because I don't have the original piece in my…
Overview The Analog Discovery 2 from Digilent is a handy tool for simple electronic experimentation offering a full digital + analog lab in your pocket. Digilent offers a BNC Adapter Board for use with more traditional test probes but is…
I included the .scad-file so you can modify or add upgrades yourself if you like. It is drawn from scratch, but inspired by some other designs from the web. Use some M3 screws with about 6 to 12mm length to secure the whole assembly.…
