Liczymy pasujące modele…
3D Silueta Toyota GR86 – Moderní automobilové umění na zeď Vyjádřete svou vášeň pro čistou radost z jízdy! Tento precizně navržený 3D model zachycuje nezaměnitelnou, agresivní a zároveň elegantní boční siluetu vozu Toyota GR86 – jednoho z…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
You need some M6x16 or M6x20 Socket head cap screws. The screws of the Trunk lock wont fit. Update 17.05.2025: Version 3 with stronger screw points.
The rear wing model features a sleek and aggressive design that complements the sporty lines of the Toyota GR86 and Subaru BRZ. It follows the shape of the car's body, providing a seamless integration with the overall design. The wing is…
I wanted a handle to grab for trunk lid closure that I could grab from any side and angle, so here's my solution. I printed with 45% infill on FFF (on a TAZ 6) and will do a 100% infill SLA print later (Formlabs Form 3). Weak point is the…
I have designed this 20mm pedal spacer and new pedal stop to simplify heel and toe with a Toyota GT86 / GR86 / BRZ. Just contact me for further details or if you need a print. You need M6x30 bolts / nuts.
I found this great design by acfs for an organizer tray in front of the 86/brz shifter. I just tweaked it a bit to get it to fit in my car. It's slightly loose for me, so I'm probably going to secure it with double sided tape or…
quadlock compatible mount.
I was missing a place to put my phone without it sliding around in the armrest while using CarPlay. It also makes space for some sweets and a coffe mug. :-) Should fit all sizes of phones - tried with smaller iPhone 13 mini and bigger…
This worked fine with the “slim mount” 6.5" polk db651s I used to replace the stock door speakers. That and a metra harness they work great. 6.5" speakers are all different and they will just do whatever mounting size they choose, print…
nut is optional … not needed dont use supports for smaller holes for cable ties
Intake snorkel for 2022 Subaru BRZ. May need sanding to fit snuggly. Heating and massaging the stock airbox is another option to make it fit(this is what I did). I recommend PETG for its higher HDT so it doesn't flex during hot days. I…
One piece reinforced rear speaker mount for the brz and gr86 chassis, should also work with frs and gt86. This was used with some skar audio rpx525s without issue. Mirror print for the other side! I recommend using some foam tape at the…
This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…
Why? KW and RCE coilovers composite lower spring perch and use a steel set screw to keep them in place. The problem is it's easy to strip the threads in the perch since the composite material is much softer than the steel set screw. Some…
This is version one of an air intake inlet tube for a 2022+ Subaru BRZ or Toyota GR86. This replaces the stock, stiff rubber unit. This new piece used a drawn out curve to try and improve airflow. Unfortunately, after CFD analysis of both…
Can be used in either cup holders. Only requirement is the use of an original iPhone lighting cable as the fitment tolerance are low in order to create a snug fit and not allow cable to become loose. To setup; Route the cable, lighting…
print in ABS or ASA, PLA will not work as it will melt in the heat 2 wall loops, 15% infill 3 bottom layers .24mm layer height
Hi there! Own a GR86 or Subaru BRZ and have come to the realization, like so many of us, that there's next to nowhere to throw your trusty Baofeng or TIDRadio walkie-talkie on your car club events? Heading to Tail of the Dragon with a…
Toyota GR86 Hakone Edition as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
By using translucent material for the windscreen and rear window, the headrests, instrument bezel and centre rear-view mirror can be seen transparently, and when illuminated from behind, the profile of the rear window can also be seen
Recommend printing with ABS/ASA/PC or other high temp filaments. Please do not use PLA. Use support for the bolt hole. I printed with ASA and used PETG for support. Works with first and second gen GR86/86/BRZ/FRZ.
Detailed Description If you own a Toyota GR86 or Subaru BRZ , you may have heard a loud crack or pop from the window when opening or closing the door — right when the glass automatically drops slightly. This tiny washer provides just…
I liked the design and incorporation of the dash curves from the original. Unfortunately, y TPU print would bounce and shake too much while driving. I tried @oddballghost print and had trouble threading into the TPU without it coming…
GR86/GT86/BRZ spare tire lock for trunk. Use a 25mm+ M8 bolt, with some glue. Print with 4 walls, 40%+ infill, no support needed. Use PETG/TPU or stronger filament.
This is a plug for the differential of a FRS/BRZ/86/GR86. This is used to plug the hole the axle goes into if you are removing or installing a differential. I used this to test different differentials and remove/install them without…
This mount will allow you to add the Diode Dynamics SSC2 2.0 to your front grill. I printed mine in CF PETG and have had no issues so far. While printing make sure to follow the orientation provided in the .3mf for proper rigidity on the…
Badge Holder for Toyota GR 86 Enthusiasts - 3D Printed For Toyota GR 86 enthusiasts, this badge holder is the perfect companion. 3D printed with a design that celebrates the passion for high performance and elegance, it is the ideal…
If you have a GR86/BRZ 2nd Generation (2023+) w/ manual transmission, have a look underneath the dash at the OEM clutch stopper. Is it ripped to shreds? Because mine was. Turns out, the USDM guys get a crappy 1.5mm thick soft rubber pad…
Since for whatever reason the sun visors on this car can "fail" prematurely so I made a window blind holder where I don't need to use the sun visors to keep the window blind up. If you have the OEM window blind and the Homelink mirror…
Tissue box holder for 2022+ GR86 and BRZ. Mounts behind the center console using ¾" wide adhesive Velcro. Fits tissue boxes of up to 9" by 4.5" (standard size in North America). Also features hooks on the inside of the box so that you can…
It's silly that so many of the models for these are paywalled. You shouldn't need to pay for a tube with a nut inside. I used a cheap $3 open end acorn lug from lordco. I think it is a 21mm but if you put the acorn side in first it should…
This tray replaces the original metal tray in the DCM and has a mount for the GJP/Hachi Electronics DCM Delete Module. You can remove the original circuit board from the DCM tray and replace it with this.
+ Updated + This second version is longer and wider as the original is not long enough (long story short) Will update later with pictures of it installed on the mirror. Since for whatever reason the sun visors on this car can "fail"…
The best way to print the design is upside down with a little support. The shipping box is optional for durability during transport via mail or freight. Originally I was contacted by a Car Club to print 20 of these and then I sent them…
Bracket for tweeters or speakers on dash
This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…
GR86/GT86/BRZ spare tire lock for trunk. Use a 25mm+ M8 bolt, with some glue. Print with 4 walls, 40%+ infill, no support needed. Use PETG/TPU or stronger filament.
This worked fine with the “slim mount” 6.5" polk db651s I used to replace the stock door speakers. That and a metra harness they work great. 6.5" speakers are all different and they will just do whatever mounting size they choose, print…
One piece reinforced rear speaker mount for the brz and gr86 chassis, should also work with frs and gt86. This was used with some skar audio rpx525s without issue. Mirror print for the other side! I recommend using some foam tape at the…
It's silly that so many of the models for these are paywalled. You shouldn't need to pay for a tube with a nut inside. I used a cheap $3 open end acorn lug from lordco. I think it is a 21mm but if you put the acorn side in first it should…
![BRZ / GR86 Hard Mount [v2] for Walkie-Talkies + AiM Solo2 / Solo2DL](https://media.printables.com/media/prints/c8eeba07-088d-4e70-8150-e9e7335dc6c0/images/11530211_9a23e077-4c1e-4c3b-a6b8-c64bb38785d1_4cb1003a-677e-43e2-99ae-e2d33ca0f54a/pxl_20251227_173657688mp.jpg)
