840 modeli
I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…
Simple tensioner for a tent guyline or paracord. I have tested the uploaded 3MF/STL files with 550 paracord (~4 mm diameter) as well as narrow tent guyline (~2 mm diameter) and it holds well. Should you need a different size, the source…
Youtooz released a model of the Purple Guy Sprite from FNAF a while ago, and I kinda wanted to try to recreate it. So I recreated it, and it looks pretty good. The eyes are off, but I think its ok. Please don't sell this, as it basically…
This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…
Now you can have your trendy game character as cute night lamps. Fall Guys and Among Us You will need some ultra-bright leds and a clock battery, this project needs some basic soldering skills and bend some pins and wire, nothing…
Anime Cosplay Derringer for Kaguya-sama Love is War. Artistic interpretation for ease of 3d printing. No secondary finishing required. Feels good in hand :) Yes, I know it doesn't have any sights--but, come on, a derringer is a…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
A coin with a Guy Fawkes mask engraved in it. Uses art from PublicDomainVectors.org .
A very quick print to make a Shy Guy key chain or zipper tag. Attached Gcode is what I used to create the example print.
A cleat I made to wrap the lines for my tarp, to make it fast to deploy and pack. It doubles as a tension device. To use it to tension the rope just pull the line through the big hole and around the ear, like pictured. Use the same method…
2-inch tall figurine of a little character I made. G-code comes with removable supports while it's printing. Comes with 2 G-codes: one with a beret, one without. Takes about 1 hour and 45 minutes to print. Made with Rhinoceros 5.…
Hello, Today I have 3 boys for you. They are suitable for coloring and the next game. Easy printing. My kids love coloring these characters :-). I used PLA/PETG as the material. No need to use supports!!! If you are interested in my work,…
SUNGUY USB Cable Mount https://www.amazon.de/dp/B09LYRRQ91?ref=ppx_pop_mob_ap_share Updated V2 Version with m3 grub screws. You can choose between two versions.
Little Gree Army : Princess Bride : The Bad Guys : Humperdinck, The Albino, Six Fingers.
You can add supports on pumpkin base for a better print Use glue to attach all pieces. I printed the pumpkin base with a 0.8mm nozzle 0.2mm layer height Face and Eyes printed with 0.4mm nozzle 0.16mm layer height Scale it as you like :)
Something quick, because of course I had to make an entry for the jointed figures competition! This snap-fit model starts as a one-inch cube and flips inside out to reveal a cute, spiderlike robot. Instructions The 3MF file has all the…
guy gardner green lantern ring from the 2025 superman movie
A version of the Doom Guy collectible from Doom 2016. At the time, the figure that appeared in the game wasn't available in real life, and I wasn't about to settle for a Funko Pop so I made this.
Plant pot perfect for small plants, succulents and cacti. He's just a little smiley guy! Two-piece design with planter and drip dray. Has a drainage hole to ensure healthy plant roots.
Mr. Stumble - Stumble Guys in low poly!
My son wanted to be a Shy Guy for Halloween this year, so I whipped up this mask for him. The lenses can be quite delicate so take care while removing the support material. I had good results using organic supports with the lenses rotated…
Hi Sofedar, I found this awesome model here skuplted by D3v1lman (check out his skills wow : ) https://www.youtube.com/watch?v=jLZbLyr2psA and thought it would be perfect for your project, The whole at the bottom is only 16cms wide so you…
Mask from V for Vendetta movie. Reupload of the https://www.thingiverse.com/thing:23457
A quick remix because my kiddo wanted more legs and more claws!
A simple cord tensioner hook to be used for guylines, ridgelines or lines of any sort when camping or during other cordage-intensive activities. I use (and recommend) it in combination with my BEEFY TRI-LOBE TENT STAKE CAP for a killer…
Welcome to the Fridge guy Dummy13 magnet addon pack. Thought how cool would it be to have these guys hanging of our fridge and printer shelves defying gravity . Each part uses up to 4 magnets but you can add as little as you want. 2 sets…
I had an old print of a similar doorstop. When mine went missing, I searched the internet for the original design file. Not finding it, I recreated the doorstop from memory. Turns out the original was still hidden deep on Thingiverse.…
Built entirely in blender. A funny looking clay figurine. Printed with PLA, 0.2 layer height. Supports needed.
This remix adds a couple details to the original by 'Tralmix'. The included .3mf file should include color changes at 1.2, 2.2, 3.2 and 4.2 millimeters for a multi-colored final product. YMMV on color change height depending on your layer…
Inspired by ButtPals, here my personal Family Guy - Peter Griffin version. Start with white color, then after 3mm insert a pause and change to black EDIT: added color stls Hope you enjoy it! HOW PRINT IN MULTICOLOR WITHOUT MMU: Printer…
Had some trouble with the original model printing the helmet visor weird since the external visor is so thin and the model has an internal visor preventing infill from getting to the front of the helmet. Corrected it in blender by…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Guybrush Ulysses Threepwood is the main character of the Monkey Island series of computer…
You'll need a little glue between the ‘’Connector'' and ‘’Body'' part. You should put glue between the hands and the arms too.
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D This is the Chill guy, in 3D! Print one chill guy and gift it to a chill guy! "Chill Guy" – Too Cool for Drama 😎 Meet the definition of…
Wearable helmet of the golden Daft Punk Guy.
Once upon a time, there was a LEGO figure named Steve. Steve was an adventurous soul, always seeking new and exciting experiences. One day he overheard a group of friends sharing an intriguing legend. The legend spoke of Max, a courageous…
Capture the essence of The Chill Guy in 3D—a laid-back legend radiating pure unbothered energy. This character is the embodiment of effortless coolness, standing confidently with hands in pockets and a posture that screams, 'life’s too…
made with tinkercad thats a original model, but it would be more convenient if people found it in these models ( SpringBonnie 13 and Dummy 13) remixes for anyone wondering " why 2 diferent files? ", well, it turned out that the ball joint…
This is my first model and also my own model plus some others which I give credit to when putting together you will have to use a bit of force and will have to and a couple of joints which you can find from the original creater of the…
Subscribe Now! Remix to support free. (Original https://www.thingiverse.com/thing:1131440 ) Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! Addiction to 3D Printing? Watch these time-lapse!…
Use this simple part to tighten lines for tents, tarps, or ridgelines. Scalable to any diameter line you need. No support needed.
It doesn't have supports. More characters are coming. it also can be used for mario kart monopoly because there are some characters that you have to buy. This is one of my first creations so it can have mistakes. anyone can do remixes and…
Need guy rings for your portable antenna mast ? Look no further. But why 5 holes? 5 hole guy rings offer easy attachment for 3, 4, or 5 guy lines, making them more universal and easier to use in a variety of setups. Rings are sized by the…
Tornado Foosball Guy A foosball replacement guy based on Tornado brand foosball tables. If you plan to use this on a foosball table, print with a large percentage infill with a strong material. These guys take a lot of abuse. Tornado…
These three hole rope tensioners are great! I couldn't believe this model wasn't already on thingiverse. Use them for any rope. Tents etc. Category: Sport & Outdoors
ARTICULATED SHARPIE GUY As requested, here is my articulated version of the Sharpie Guy. I designed this based off the 3.5" G.I. Joe's from my childhood. I printed mine at a speed of 50, with a resolution of 0.2 mm. Assembly instructions…
I'm P1lotz and I am a Danish 3d artist. video: Today I made a Ryan Reynolds' Guy from Free Guy into a Funko pop. The model is supposed to look like Guy in the posters, where he opens his blue (look at the picture below). shirt, just to…
Introducing the Guy Fawkes Half Mask. For optimal print quality, it's recommended to use support structuring during the printing process. After thorough experimentation, tree support has been proven to be the most effective and…
Lucky 13 Guyver head If you like it --> press like it :-) Guyver head as a remix for the funny lucky 13 figure. The original is from iczfirz . Take a look at my models, there you can find some more equipment for lucky 13. Would be happy…
Guy Insulator for antenna towers, guy lines, sailboat back stay antennas, and anywhere you may need such an item. Designed with 10mm hole for your line or wire. Easy to scale to whatever size desired. I like 100% and 80% for my needs. If…
I DO NOT technically own the rights to the original character (ming and disappering guy in this case), but this time I created the design of the mesh myself. I ENCOURAGE buying the official stuff from the website here:…
Give your Sharpie a bit of personality with this mod. Requires supports to be turned on. I printed at 0.2mm layer height with a speed of 100. If you have any questions, don't hesitate to ask. UPDATE: I made an articulated version of this…
The file may be really small. Resize to your desired size. Print is quite scaleable I wouldn't recommend printing more than a .2 resolution Paint how you want! /!\ Be cautious of the leg stands when removing supports. They are a bit fragile
Stewie from The Family Guy Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
I looked around a lot (and I mean a lot) to find a proper chain link to use together with my version of speedbump . No way!! Don't get me wrong. Many of them worked, but I'm a perfectionist and I wanted one to put the chain perfectly in…
Scan of the screen used original head
Designed with the Amateur Radio community in mind. Designed to wind up Antenna Dipole legs to keep them tidy and kink free. Other great uses are for 550 or paracord, kite string, fishing line, etc. it requires any type of elastic cord to…
Subscribe Now! Remix to support free and printed. Time-lapse print video : Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! Addiction to 3D Printing? Watch these time-lapse! https://youtu.be/-ZsXFX6hjXk…
A miniature to celebrate the fact that doom eternal is coming this month! If anyone wants to help with a tip so I can buy a copy, that would be swell! But if not, Why not post a picture of your make? Thanks for printing! Have a free…
I make Banana head for Generic Figure (6:1 LEGO) by @bigbricks. PRINT SETTING 0.2mm layer height 3 walls 5 bottom shell layers (optional) Rectilinear infill parttern (optional) Auto Tree support I officially move to Thangs…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Basic ShyGuy mask. Optional anchor points for attaching a string or elastic. May need a dab of glue to hold them in place. Also added a split version for less supports and smaller print beds.
Simple guying line spooler. I made it for my amateur radio station. You may also use it for kite or as a general paracord spooler. Print instructions Thin version is 5mm, thick is 7mm. I printed this from PET-G.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
stumble guys - logo + head keychain PLA
All of us have been camping, tripped over a rope and dropped something. well I certainly have which is why I designed this simple guyline highlighter. Now you can freely walk around at night without fear of tripping over. Quick Print :)…
My friend loves shy guy from Mario Bros, so I made him a bobble head! It's a pretty good size and will take around 8+/- hours to print everything. It printed with little flaws and works pretty well. I made some adjustments to the…
Brian from the Family Guy Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
fnaf world purple guy keychain.
stumble guys - change color logo keychain
Support : part 1, part 3, part 4 : no support needed part 2a , part 2b : support at base plate only Adhesion : i use brim for poor adhesion What to print : part 2a has no phone stand slot , part 2b has phone stand slot . They can be…
Hello. Today I prepared Benny the space guy form The LEGO movie. Benny is approx. 45cm tall. Scale 10:1. For print you do not need MMU unit and the glue is not needed also. Because it is quite big guy I recommend use 3 perimeters, 15%…
This versatile antenna winder is ideal for a variety of uses, such as guy lines, counterpoise wires, antenna wires, or even the whole antenna by adding a BNC connector to one of the accessory holes. The winder is a staple in my amateur…
This is a set of pieces that can be used to recreate the Hazmat Guy figure at 500% scale. This figure was included in the Series 4 Collectible Mini-Figures released in 2011. All of the stl files needed to create this have been included in…
It's a guying rope collar to support the guying ropes on the 10m fiberglass mast from the Spiderbeam company. The outer diameter of the collar is 110mm, the inner diameter - 53.4mm (this includes some 0.4mm overlap for the bead of…
Hello, Banana Bonanza from Stumble Guys. Thanks for your download, enjoy the print!
This is the little “Pegwin” from the Fall Guys game, which you can have as a keychain. The fett spin round like they do in the Fall Guys game. You will need to glue much of it together, and the body parts will need support, but i have…
1 in 102 tap cap lacy and click collab slime guy
Guy holding up middle fingers wall art. Category: Art
Simple spool for rope or tent guyline. It has V-shaped notches to fix the beginning and end of the rope.
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
I made some Fall Guys cookie cutters for a friend. 3 different poses. Print instructions Print with a food safe PLA or PETG I sliced these with the experimental Prusaslicer 2.3 so I could use ironing to seal any gaps I also added a…
If you like what I do and are interested in supporting my efforts to create free board game models, then check out my patreon: https://www.patreon.com/warehouseworkshop Patrons have all my models available in one place. You will also have…
A dude.. With a... Hmmm.. Airsoft gun? Category: 2D Art
Doom The Dark Ages - Doomguy
This is a remix of the antenna winder by K6ARK. I've added some holes for wire and guy lines. It will work as a sliding tensioner for guy lines. This is part of my every-day-carry setup. It replaces the buddipole winder that I use for my…
This is a fully functional, 3D printed Slime Guy–inspired Tap Cap designed to work with standard mechanical key switches
Goofy little ghost guys I made on accident! I was messing around and ended up making a cute little character I wanted to share with you all. Fusion files are included down below for ease of remixing, I can't wait to see what you guys…
Tested and printed without issues using Cura slicer.
The iconic baby Stewie from Family Guy, measuring only 13cm in stature.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Mario inspired, Shy Guy, Tabletop DnD miniature 25 mm Medium base which can be used for DnD and other Tabletops.
Mask inspired from Mime and Dash
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
