Źródło oznaczyło ten model jako treść 18+.
Wydruk około 6,48 €–7,92 € nettoWstępna wycena jednego wariantu
- Pobrania
- 778
- Polubienia
- 330
- Ocena
- 0
Liczymy pasujące modele…
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 6,48 €–7,92 € nettoWstępna wycena jednego wariantu
Plastic is not very strong, but when it is attached, there is no leverage to break it, so it is secure enough. For printing use 100% infill and 0.1mm layer height. Numbers in model names are clearances. Cover part is designed to be…
A simple shackle for my Traxxas TRX-4M Defender bumpers. Printed in resin and painted. Paper clip can be used to be pressed in to fasten it to the bumpers. Drop of glue might be needed at the ends to secure the paper clip in (I did not…
Designed to be printed flat without support. Picture is with 6 strands of #275, 3/32" (2.3mm) paracord, but 4 strand of standard #550, 5/32" (4mm) should fit well too.
Modular 3D printable model set, which allows you to create authentic chains and shackles for hands, legs, and neck, perfect for a wide range of cosplay creations. Whether you're embodying a fantasy, sci-fi, or historical character, this…
Inspired by @74TOFU's fursuit shackle prop, I created this model from scratch and added some improvements. Cuff diameter is 72mm. Measurements were made specifically to be worn over my fursuit arm paws. Prints with 0.2mm layers. Supports…
I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.
I designed this nice remix for a project to lock a crate with a padlock or D/CLP-shackle. I added my source files (.ipt) so you can make adjustments if needed. The geared hinge is a print in place part only support needed for the cut-out.…
A set of inserts that can drop into the included tuck boxes, which will also function as holders for the resources etc. The main aim was retaining the original tuck boxes while at the same time increasing their strength, and making them…
This snap shackle is good for light duty rigging and can be scaled up in size. 200% was a useful working size for me. Materials: Printed parts Spring - The size depends on the width of the gate pin, the spring should slide onto the narrow…
A diz is for pulling spinning fibers off wool combs, a hackle, or a drum carder into a spinnable band. The diz is slightly rounded and has holes of 2, 3, 4, and 5 mm in size.
A shackle mount for use with the original shackles that came with the TRX4 2021 Bronco. Simply remove the tube bumper part and mock winch, and bolt these on using M3x5mm button head screws. Interested in our RC crawler bodies and…
I didn't want to buy a whole set of shackles for the hook, so I just designed one to use with a M4 Screw. I printed it with PETG and 100% infill for extra strength, but you could definitely get away with using PLA. I used a M4x20 screw I…
Paracord bracelet shackle with a counter bore that retains the pin.
This is an insert for Shackleton Base. The personal Player insert was designed to fit Clownfeet's design of the 3D domes. His design can be found on Thingiverse or Makerworld (I painted his file and gave him credit). Clownfeet's 3D Domes…
I wanted to add a little pizzazz to my truck but did want to spend the money to add these shackles that might just get stolen! And the best part you can print in any color you like or to match your needs! DO NOT USE FOR ANYTHING BUT…
3/8" SCREW PIN ANCHOR SHACKLE
Update 17.07.2025: New Version added. Better printing gcode. Fits better. Original is broken. New Verion: Stronger and more aerodynamic. At least 4 layers above, below and walls. At least 25% infill. I put felt tape on the inside of the…
A small shackle with 3d printed locking pin and a smaller shackle. Bigger shackle has ID of 25mm and fits around a quarter. Reposition body to lay flat and print without support, loaded properly can hold over 100lbs at 20%infill in PLA.…
This model is compatible with the lego system.
The model can be scaled up easily in your slicer. If you have some you can use gift ribbon to make tow straps.
Based off of a puzzle I remember solving as a kid. Print the bar first. When printing the shackle, the long side should be on the plate, with the loops pointing upwards. Pause the print when the loops are still open, and place the bar…
Ramshackle Dorm, once abandoned and haunted by ghosts, now inhabited by MC and Grim! Charms for Grim and an UNOFFICIAL design for the Main Character Models are 65mm in height. Scale them smaller for earrings or bracelet charms. Printed…
Do your friends drive Jeeps that haven't so much as seen a dirt road? Swap out their fancy recovery shackles with one of these! They'll never miss it! I suggest splitting the shackle into two pieces to print, and then gluing them back…
Video link Soft shackle rope pulley for up to 6mm rope This pulley was designed for low to medium operational loads, but will hold the rope up to the breaking strength of the soft shackle that was used in the assembly. Use 3mm dyneema…
I needed a quick release shackle to allow my students egg droppers to drop easily from a beam hanging from the ceiling. The latch can print with no supports or brim. The main body needs to be printed with supports everywhere (would block…
Working Shackle Hoist model with removable pin, created to aid in printer part design changes. Step file included
This compact shackle key is designed to help you securely tighten your shackle pin, ensuring it stays firmly in place and won’t loosen over time. Commonly used on sailing yachts to fasten rigging and secure equipment, it provides extra…
Krampus can holder Collection - Shackled Krampus Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, brim,…
A shackle lock holder for Abus Granit XPlus 540 that mounts on the bottle mounts. 63mm between bottle mounts +/- 5mm. Fit is tight and avoids too much wiggling. Had great results printing: vertically supports only on the inside part using…
A custom shackle bumper for Jeep Wranglers or Gladiators, with " 1941 " inlay. The main body should be printed using either Nylon, TPU or Onyx (nylon/carbon fiber) material. This will give you some flexibility to get the bumper around the…
This is a mounting plate for shackles and other accessories with a 10x10 mm bolt pattern. It reuses the original mount points of the Bamboo4x4 rear bumper pieces. Hex nut cutouts are for M2 nuts (4mm socket). I've printed the part with…
To build this hoist, you will need: 2x 14mm straight shackle 6m (or more) of 6mm rope 6 pulleys to be printed in a very strong filament, I used Iglidur C210 2 rope holder (optional, not on the image) 4 rubber band to close the rope…
Tackle to increase your lifting strength This tackle is designed with the idea that if the plastic parts break, you should not drop what is being lifted. And of course you can modifie my design easy by downloading *.3df file. Safety This…
An upgraded, high-durability replacement shackle spline clip designed specifically for the Kryptonite Evolution Mini-5 U-lock. The stock aluminum spline connector is famously prone to loosening, causing the lock to vibrate loudly, rattle,…
No supports needed, just trim the tabs on the hitch plug when complete! This is not meant to be structural, but hey post up if you do some pull test with. Im guessing it wont be good due to layer line issues….
There are 2 types of chains. V1 and V2. The difference is the placement of the chains coming out of the cuff. It should fit most models. Printing: Print with 50+% infill so you don't break them. Print without supports, Brim is ok.
Supplement to adjust the width of the bracelet with the shackle from mobiobi. Download the shackle at mobiobi directly. The extension can be printed without support and border. Preferred material is PETG or PC
If you are using access to 3rd row only from right side of the car you can use step on the left side for this box. Store shackles, straps or other items here. Use velcro tape for attaching box into the place.
Did it from PETG. 02, 20% infill As this item should withstand marine environment I wish I could use Nylon instead.
The long pin… should be on an angle to hook the gate into the closed position like this one https://www.printables.com/model/193865-quick-release-snap-shackle I tried using a spring from a pen, where else can I find a spring easily?…
A rather simple "lock" to keep pets out of my closet. The dumb cat learned how to open the door but doesn't know what he wants inside. Now he does it for fun every night. Highly recommend printing at 0.5mm height and modifying the f3d…
I just added the "Emergency Anchor Release" text deboss, and scaled down to 60%, identical otherwise to the original.
Increased spring shackles for WPL C94 UAZ-469. Also suitable for other WPL models. (SolidWorks 2020)
Fun little Dog Poo Bag Holder Prints easily in separate pieces and glues together Prints with no Supports, Just place logically on the print bed. I used small offcuts of filament to mount the shackles in the holders. It is a snug fit on…
meant to secure a 2.5 - 3 inch diameter pipe or object using a carabiner and paracord to lock it down.
3d printable sailing block/pulley Uses a soft-shackle and 6203 bearing My soft-shackles are 60cm of 2.5mm dyneema. Printed for testing in PLA and tested as shown in photos, I don't have any numbers on how much it can take but it was quite…
Made the shackle holder have a weirdly specific twist in it (which I did backwards at first, hence the two different ones in the photo) so it'd hold the shackle to the leg of my rack (with the top of the lock held by its own mount).…
A series of four trays for the player pieces - plus two identical trays for the money
A fully printable pulley with an extra eyelet to add something else if needed.
The shackle holes are symmetrical 2.4mm and not threaded. I printed in PLA with 0.20mm layers and the screws threaded securely with no other preparation (I oriented them opposing directions for each side).
Small improvement over the first version. Note: not compatible with original.
For the Warn Epic Sidewinder shackler, you can purchase an Isolator to protect the pin from being damaged from rocks or other road debris. I was about to make one to 3d print and figured it would be nice to keep the OEM pin with my winch…
Longer shackles for FMS Mashigan with leaf-springs kit. The way the leaf-springs are designed, you either end-up with a lowering kit if you go axle above or a high-heels kit with axle under ... Easiest way to correct the lowering kit is…
Ernest Shackleton Bust STL is a historical soldier and explorer figurine model for collectors and 3d printing fans, featuring the Ernest Shackleton Bust design as a display-ready sculpture. Ideal for desktop decor, history-themed…
Print two pieces, join with M2 bolt (and nut, if needed)
Repair kit earphone shackle for Philips SBC HP200
This hanging shackle bracket snaps onto Barrina T5 grow lights bars and adapts them to hook mounting. Uses M3x30 screw and locknut. PETG & stainless hardware recommended. Print with supports. Clip is fairly stiff and requires some force…
The Shackle Box is designed to hold 2 shackles tightly to prevent road noise. Its designed to work with a Molle system. hand the box on the back of your Molle seat cover or a hard Molle panel. Keep your recovery gear organized with the…
thole is my project in which I will focus on parcord bracelets. Or rather accessories for making them
This is the end of a carrying strap to accommodate a 3/16 in anchor shackle and a 2 inch wide Velcro strap. I made this to carry skis with a shoulder strap I had from another bag. The shackles are from Home Depot (Everbilt 3/16 Anchor…
Created some specific tuck box inserts for the robotics, selenium and evergreen companies
Shackle spacers to fit a stock length T-100 pickup shackle for use on a Mazda B2200 pickup using the Belltech lowering springs. These springs are longer than the stock Mazda springs and thus cause the spring shackle to contact the frame.…
This is a 3D model for a basic leaf spring shackle. It can be used for many vehicle models, including Toyota Pickup/Hilux, 4Runner, T-100, Tacoma as well as Mazda B2200 and B2600 pickups. Spring shackles can be used for suspension lifts…
OVRLand Shackle Isolator Stop the Rattle. Protect Your Gear. Enjoy the Drive. Have recovery shackles on your vehicle that constantly rattle, bang, and clang while driving? Every bump, pothole, and rough trail sends metal knocking against…
Shackle Connector Set – a modular system designed to securely link 5mm shackles in multiple configurations. This set includes two types of connectors: 1. Pole Connectors (for the shackle rod/pin side) Available with precision holes Or…
Believe it or not I've had my Tx fall off the strap. This should add a new level of safety. To unhook from tx, just rotate part so that shackle pin can be slid up: Category: R/C Vehicles
I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.
This is the end of a carrying strap to accommodate a 3/16 in anchor shackle and a 2 inch wide Velcro strap. I made this to carry skis with a shoulder strap I had from another bag. The shackles are from Home Depot (Everbilt 3/16 Anchor…
Shackle Connector Set – a modular system designed to securely link 5mm shackles in multiple configurations. This set includes two types of connectors: 1. Pole Connectors (for the shackle rod/pin side) Available with precision holes Or…
This is a 3D model for a basic leaf spring shackle. It can be used for many vehicle models, including Toyota Pickup/Hilux, 4Runner, T-100, Tacoma as well as Mazda B2200 and B2600 pickups. Spring shackles can be used for suspension lifts…
Paracord bracelet shackle with a counter bore that retains the pin.
I have a spare ABUS d-lock clamp for a bike and a spare Kryptonite d-lock. I wanted to be able to use the Kryptonite d-lock with the ABUS d-lock clamp but the bar size is slightly thicker for the kryptonite lock (13mm) compared to the…
Old West Art - Wagons - Ramshackle Covered Wagon 3D printable model.
Shackle, screw, nutShackle, screw, nut and pin / Grillete, tornillo, tuerca y pasador. Heavy-duty element / Elemento de alta resistencia
Shackle, screw, nutShackle, screw, nut and pin / Grillete, tornillo, tuerca y pasador. Heavy-duty element / Elemento de alta resistencia