115 modeli
Tile for 3D printed game, Hextraction. Remixed from Zach Freedman's model, which has the unintended consequence of the center star acting like a ramp instead of allowing the model to trap the balls. In my remix, I changed the star from an…
Tired of your balls rolling everywhere? Here you go! Designed to keep your 3 tiles together, while keeping your balls in place. All that's needed is a Hextraction Set and 10mm balls (which I'd assume you already have), around 25g of…
Build-able marble racing !!!!!! Saw an Upload from A.Fool for his own modded tile which led me to find this, Without A.Fools tile i wouldn't have seen this , for that reason i'm uploading it here for viability. All models here were…
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
Supports!? We don't need no stinking supports!! This remix of Zack Freedman’s basic Hextraction tiles was done to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for…
This remix of Zack Freedman’s Hextraction Pachinko Tile was done to replace the filament pegs with M2 screws. The fillets around the ball channels were edited slightly for a smoother appearance & the built-in sacrificial support was…
This remix of Zack Freedman’s Hextraction Trap Tiles was done to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for supports. Learn more about the free 3D-printed board…
This remix of Zack Freedman’s Fancy Hextraction Game Board was done primarily to eliminate the need for glue or supports. All parts are now held together by screws, heat-set inserts, & small bolts. Part design & orientation has been…
This remix of Zack Freedman’s Hextraction Clone Tile & Card was done primarily to remove the built-in sacrificial support as most printers should be able to bridge this distance without the need for supports. See the changelog below for…
A game tile for Zack Freedman's Hextraction “a purely physics-based newton's cradle-like contraption! if there is a ball trapped in one side, a ball from the other will knock it free! (most of the time. fun variation!) if a ball is…
This remix of Zack Freedman’s Cartoon Bomb Tile & Card was made for both functional & aesthetic reasons. The primary changes were to remove the built-in sacrificial supports as most printers should be able to bridge this distance without…
This remix of Zack Freedman’s Gear Tile & Card was made primarily for aesthetic reasons. The major changes were to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for…
! v1. of the ball-catcher combo is ONLY compatible with the fancy board variant of Hextraction which uses gutters. A future version for the basic board may/may not be made ! Print Settings: No supports should be required Both have been…
This is a tile for the game Hextraction. Tidal Wave: Pick a direction from where this tile is placed. All tiles in that direction are pushed one space away. If a tile falls off, it is destroyed. I printed using overture matt white PLA and…
This remix of Zack Freedman’s Hextraction Flip-Flop Tile was done to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for supports. The cross-bridging of the floating hole…
I always disliked the default secret tiles layout. It was easy to place in “invalid” orientations, cause jams to mechanisms, and unintentionally block paths. These tiles ALL: are playable in any orientation have 6 entrances/exits aren't…
This remix of Zack Freedman’s Hextraction Backrooms Tiles & Cards was done primarily to correct/update the rules text on the Backrooms Entrance Card & to remove the built-in sacrificial supports on both tiles as most printers should be…
Print base and top separately and glue together; if anyone wants the colored 3mf version, comment and let me know.
A set of 6 strange tiles for the hit new game Hextraction! They may not seem compatible, but some tiles (like the pachinko) are cross compatible. The “Base Tile” is generally used to keep the ball from leaving the board between Vertex…
A simple box, I designed for 10mm balls. I found out, that it is very satisfying, when the balls fall into their cutouts. Suitable for Hextraction. Features Space for 19 10mm balls (yes, it hurts because it's not a round number) The cover…
This remix of Zack Freedman’s Void Tile & Card was made primarily for aesthetic reasons. The major changes were to remove the built-in sacrificial supports as most printers should be able to bridge this distance without the need for…
Introducing the "Respawn Tile" by NuIIPointer: A Revolutionary 3D-Printable Hextraction Tile for the Advanced Hextraction Grid, Designed to Recover Lost Balls. In the world of competitive gaming, where every move counts, NuIIPointer, a…
Introducing the Dicey Destroyer Tile! When the trigger gets activated, roll a six-sided die and destroy the tile adjacent to the number that was rolled. If the space that was next to the number is empty, destroy the dicey destroyer tile…
K tile for hextraction board game
This remix of Zack Freedman’s Hextraction Secret Tiles introduces an alternative lid design. Instead of a flat question mark, this design is inspired by the Question Blocks found in the popular Nintendo Super Mario games. Learn more about…
Tile for hextraction gamę board
This is a remix of the teleport tile for Hextraction. The built-in supports are removed, as these should be bridgeable by most printers. Below is the original description by Zack Freedman: Beam your balls with this gravity-defying combo…
tile for hextraction board game
Well, any tile within reason, at least. The bread and butter of buttered bread of this design is actually this Tinkercad link . Even though the native 3D viewer detests me (and the model itself is atrocious), this is a hole punch to…
A bit early for Valentines, but here are some heart-themed tiles, for lovers of the game Hextraction by ZackFreedman Why not print the little 💕 around the top in a different colour? heart tile aka full of heart: a possible trap, usually a…
Zack Freedman's Hextraction game https://www.playhextraction.com/ encourages people to print their own game and even design their own tiles. Quite a few tiles can be used in ways that would cut-off a path for the ball; this tile allows…
These two prints make up the 5-15 board from the native Hextraction source file, but break it into 2 components which are more manageable for printers with <300mm bed sizes. -final assembly will likely require glue to complete.
This is a themed version of hextraction . Zack Freedman created a fun and interesting game, but visually it didn't resonate with us. So, we picked a new theme, modelled a new endzone, painted stls in the slicer and printed it. The chosen…
For some reason, the hole depths of the original mystery tiles were different, so the lid wouldn't fit, leaving a 1.5mm gap. I took the liberty of extending the holes for the broken models, but I left the lil DC tile unchanged, since the…
Inspired by the toddler wish to have tile with a snail I have created the Helix Tile. The sweeping was a nightmare but finally it worked and looks pretty awesome. Play Hint: you need one tile straight before the Helix Tile otherwise it…
Gauss Cannon tile for the game Hextraction by Zach Freedman. To use the tile, prime it by inserting two balls on one side of the magnet in the direction you want to launch. This tile only works once so after it is used you can use it as a…
This tile is designed for the boardgame by Zack Freedman: Hextraction. The moment I saw the 3 way traptile, I was thinking of the radiation sign, and my tile was born. It is called: Reactor meltdown. It is a tile to give the game a bit of…
What originally was designed to be take on a classic pee-wee golf hole ended up looking like some funky emergency raft. PETG printed just fine with minimal organic supports.
The hextraction board legs are currently (beta) in 2 parts, without any way to connect them together. This will probably change in the (non beta) release. Since I cannot wait to test silly things, I merged the top and bottom parts of the…
I love the original idea, and the main design of the lamp, but I improved the look. For the best look two filament changes are recommended. (The photos show the tile printed scaled down to 80%, since my whole Hextraction set is 80% scaled…
I was having trouble cleanly printing the original secret lid for the Hextraction board game, so I took the liberty of indenting the question mark to allow me to print it with no supports at all, Be sure to rotate the model so that the…
Quick refrence to instructions for Zach's ( https://thangs.com/designer/ZackFreedman ) game called Hextraction.
This is a tile for the game Hextraction. The grass is always greener on the other side: Trigger: Take ball out of this tile and place it in any adjacent tile. Printing Instructions I printed using overture Bambulab Green PLA. It prints in…
Who said it had to be a game? i thought it would be funny if i actually made tiles for the “gridfinity 2.0” april fools announcement from zack freedman. it was not funny. im still posting it.
A tile for hextraction game where all paths lead to the same place
53mm wide organizer for Hextraction tiles. 5 standard tiles will fit per column. Printed with 1 wall (0.4mm wide) and 2 bottom layers to save your filament.
The Genies Lamp- If there are 3 balls in the lamp, remove the lamp and search for any tile you want. Then place that tile in genies place and roll the 3 balls in genie one at a time. I had help from squinn on the design in fusion 360,…
Forces ball one way or the other.
Paths curved around the center.
print in 100% infill and use a brim if it is coming off the bed mid print
We've been building and playing Hextraction by Zack Freedman lately. My kids requested a new tile design that I couldn't find readily available, so I used the template provided by Andy Piper and created a simple version myself. Basic…
You need 16 magnets 5mm dia, 3mm height for both legs. You might get away with half of that, but stability might suffer. There is one downside: magnetic balls get stuck, not really an issue IMHO. Replace the old Gutter segments with…
Most of the credit for these designs should go to ZackFreedman and Inaudable from Thangs. Thank you to you both for this fancy Hextraction board! This remix was started with just making a custom goal with (in my opinion) clearer symbols.…
I've designed this caddy / insert to easily store my Hextraction tiles. It's extremely basic but it does the job well and doesn't require much filament :)
Mattress Asterisk — because it’s fun to say! This is a purely aesthetic remix of Zack Freedman’s basic Asterisk Tile — now with an ultra-plush pillow top! Learn more about the free 3D printed board game Hextraction here . Print Settings…
Battling the bothersome base of the Hextraction board, I faced fussy forcefulness that turned threads to tears. Curious about the original creator's chosen clearances, I concocted my own clever counterpart: an M7 x 1mm threaded treat,…
A DC tile with keys removed so it can only be placed laterally.
I love the original design by Luke Tillotson , but wanted to create a new version with concealed magnets. Simply pause the print after 4,2mm (so before layer 22 if you're printing at 0.2 mm layer height), insert six 3x2mm magnets, and…
Hextraction card with embossed logo on the front, and a QR code linking to How to Play Instructions on the back. Printed on Bambu Lab X1C with AMS, Prusament Galaxy Black and Lime Green filament, PLA 0.2mm layer height with ironing.
This is my take of the Yu-Gi-Oh card Swords of Revealing Light as a tile for the free 3d printed board game Hextraction! This tile, just like it’s card game inspiration, can block balls for 3 turns (or just 3 balls depending on the…
This is the laziest model I could upload
This is a screwdriver-style 15mm nut driver I designed for use with Inaudible's excellent Modular Hextraction Board . I wanted a design strong enough to handle some torque, but small enough that it would be easy to permanently store with…
My kids wanted the option to pick their own tiles instead of having to close their eyes when drawing at the end of the turn. I'm not sure it's super balanced as is, I thought about removing some of the notches to restrict the placement or…
For Christmas this year, I printed out the basic set of Hextraction ( http://playhextraction.com ). I printed what I thought was the “basic” set up (although that is not very clear) which included some truss-looking support legs to tilt…
This is a small collection of physical rules cards for the game Hextraction. These cards are intentionally a different size/shape than the special tiles rule cards, so that they can easily be distinguished from them. They do maintain most…
Flip your game on its head with this wild mechanical tile for Hextraction, the hackable, 3D printable board game. Like the traditional Japanese water feature, the Sozu Tile has a unique threshold mechanic - the first ball to enter gets…
What is Hextraction? Disclaimer: Any similarities to tiles created by others are purely coincidental. There are so many track tiles available that it's very difficult to create something truly original. Thanks Tile description: Here are…
For the pivot point stick a piece of filament through the paddle and sharpen both ends. sandwich between the top and base.
After printing a new version of the mystery tiles that used the “?” from Mario Bros, I had the idea of designing this shell that is sure to bring some chaos to your games! Like in Mario Kart, the blue shell is meant to create some chaos…
Have fun with this sub surface magnet Trap Tile for hextraction!
It's a Trap tile for Hextraction
i dont liek heat insertz A simpler solution for constructing reliable legs for the marble run boardgame – Hextraction. Wanted to do M4, but hardware store only had M5 bolts. Oh well. This design uses 2 M4/M5 nuts and 2 M4/M5 bolts with…
What is Hextraction? Tile d escription and rules: Cut the game in halves with the Saw Tile. If a ball rolls through this tile, itself and all tiles in the same vertical row are destroyed, like a circular saw that cuts through the game…
Hextraction is an open-source game - you can download the files to print yourself, or find a pre-printed set to buy. Rules: https://www.playhextraction.com/how-to-play
Introducing the Dicey Destroyer Tile! When the trigger gets activated, roll a six-sided die and destroy the tile adjacent to the number that was rolled. If the space that was next to the number is empty, destroy the dicey destroyer tile…
These files are for creating your own Hextraction tiles and cards using FreeCAD. They were created with FreeCAD 1.1 and the Dynamic Data add-on. v2: Corrected a few measurements, and added some basic tile examples. v3: Added more example…
This is Bowty's King Tile Remix of Zack Freedman's King Tile but with the addition of my original Rules Card.
Put some storage on the board with the Hextraction2Gridfinity Tile! This design is a mashup of Zack Freedman's Gridfinity (the modular storage system) and Hextraction (A hexagon shaped, marble rolling board-game) tiles. Prints in two…
A creative trap tile with an 8-bit Mario theme. After trapping the first ball, a path opens with a cool flip down ramp - giving players a 1up! This tile is a remix of @andrewtho5942's original model from Thangs.com. Printing: The…
Tile can be put in 2 positions with “main” passage going diagonally and activation passage vertically or main passage being vertical and activator to the side. Printed with layer height 0.2mm. Used 25% infill in spinner for better…
print the gutter end cap and this plus what the legs need to be made. also you need all of the basic board stuff.
I love this tile in my games, though I'm a bit of a stickler when it comes to consistency. I've included a version with the original rules from Psychotrop, and another with an extra “On Destroy” condition, to dump all the stored balls…
Converted Lid to accept 5x2mm magnets to keep closed
Hextraction is an open-source game - you can download the files to print yourself, or find a pre-printed set to buy. How this tile works: This tile can be placed in two ways: vertically, then if the ball is moving fast, it will go like a…
The Loss of traction Tile for Zack Freedman's Hextraction. This tile is my original creation to throw some more chaos into the already chaotic game.
What came first?: Trigger Chicken - Place a chicken on one of the shooting ramps blocking its access. If a chicken has already been created, you may change the posistion. Trigger Egg - Roll an additional egg ball for your turn. Printing :…
Original Model Description by Zach Freedman When nothing remains, everything is equally possible. Dump your hand with this simple utility tile for Hextraction, the hackable, 3D printable board game. I developed this as an example of a…
This tile sends your board into a Mirror Universe! TRIGGER: Starting with you, each player draws a tile which gains "Overwrite anything" and plays it. Ignore On Play effects. Then destroy this tile. For multicolor printing, swap filaments…
TL;DR This is a variant of a Flip-Flop tile for the 3D-printed board game Hextraction . The main feature is that it can be rotated, so it can be used on the whole board Print recommendation: Nozzle : 0.4mm Layer height : 0.2mm Perimeters…
Use the same settings u use for your tiles.
no supports needed for any thing if you wnat to print a spacer then you sould print multipul so that it comes out better. you may need to shrink or enlarge the tile so it fits on your game board.
A new flip flop design for Hextraction that fixes a lot of issues with the original concept. It takes in balls from any top edge and alternates between sending balls left or right. Pros to this design (over the original flip flop): - More…
Trigger: if 3 balls are inside, destroy this and 2 tiles each in direction of arrows (5 total, including itself) note: if it is destroyed any other way, nothing happens. it is a bit of a tight fit in the board, planning to make a rules…
Happy Easter! It's time to go egg hunting in Hextraction, with the Egg Basket tile. This tile, while being a temporary roadblock, allows you to search up any tile to replace it with when it's destroyed, or immediately if you manage to…
Put your tiles on the same wavelength with the Echo Tile! Set up and execute clever two-for-one plays or crazy chain reactions! I designed this specifically for a custom gamemode I'm working on but it also works fine in the base game. And…
Introducing the new "Sprout Tile" for the game Hextraction by Zack Freedman. This tile allows you to place another tile alongside this one. When placing this tile, you may choose any adjacent slot to place a new tile, even if that means…
I was inspired by dapperrogue's skybridge tile https://thangs.com/designer/dapperrogue/3d-model/Hextraction%20Skybridge%20Tile-1362865 . So I decided to make a smaller-scale version of it that's easier to assemble. This baby version has…
