Wyniki wyszukiwania: hifiman

Sortowanie

41 modeli

P
PrintablesVOID

Hifiman HE400SE Grills

Hifiman HE400SE hexagonal grills, heavily inspired by the Custom Cans Super Grills . Modeled from scratch with a less dense hex pattern, purely based on personal preference. I would recommend printing them face down, they should easily…

Pobrania
486
Polubienia
24
Ocena
5
P

Hifiman HE Stand for Arya, HE1000, and Jade series headphones with Dekoni pads

Hifiman HE Stand for Arya, HE1000, and Jade series headphones. This model works best when the larger Dekoni pads are installed, as the original pads are slightly thinner.

Pobrania
375
Polubienia
21
Ocena
5
P
PrintablesCammy

Triangle Replacement Grille for HIFIMAN HE400se and HE6se

I reccomend that you print this out of PETG and also salvage and stick the original dust protective mesh onto the back of this one to protect your headphones driver.

Pobrania
238
Polubienia
10
Ocena
0
P
Printablesnaschorr

Hifiman Sleeved Ear Pad Adapter

What? Printable solution for using any flavor of 104mm, 108mm, or 110mm sleeved ear pads on your Hifiman headphones. Unlike other options, this solution is much slimmer, doesn't require supports, and is designed for quick printing. Note…

Pobrania
194
Polubienia
16
Ocena
0
P
PrintablesiElectronCloud

HIFIMAN Ear Pad Mounting Ring

Ear pad mounting ring for Hifiman headphones. The model fits similarly to the original. The design is slightly different to the original due to the differences in material properties. This model is meant to be printed with PLA. Update:…

Pobrania
158
Polubienia
10
Ocena
0

Hifiman Sundara cradle/stand

A headphone cradle for the Hifiman Sundara. Inspired by the Hifiman Shangrila Headphone Stand.

Pobrania
151
Polubienia
8
Ocena
5
P
PrintablesFragezeichen

Hifiman Headband (Sundara/Ananda etc.)

This is a headband model I made for my Hifiman Anandas, it should work for the Sundara as well and all Hifiman headphones with the same type of Head-strap contraption. You do have to do some disassembly to install it but that should be…

Pobrania
100
Polubienia
6
Ocena
0
P
PrintablesPapatutuwawa

Hifiman HE400SE Bass Bosst Earpad adapter.

Based on Tiddley earpads bracket, closed the holes, this bracket is made and recommend to use with Tiddley Fazors but they are optional (use double side tape on the magnets holder not on the magnets). Boost sub bass, bass and reduce a…

Pobrania
91
Polubienia
4
Ocena
0
P
PrintablesJoel Pang

Hifiman HE400SE Grilles used with Original Ring

The height of the base has been reduced by 0.2mm, enough for 2 layers on the bottom. This allows it to be used easily with the original retention ring. However, it could be a user error on my end. On the original model, the nubs could be…

Pobrania
73
Polubienia
3
Ocena
0
P
PrintablesNoplaren

Hifiman Edition XS yokes

Hello, Custom yokes for the Hifiman Edition XS if you want to mod you headband. Might require some extra tuning after print for the screw holes of headband connection. Uploaded are two versions. -Ver 1 is without extra material and might…

Pobrania
62
Polubienia
5
Ocena
4
P
Printableslionpants

Hifiman Sundara Modmic Mount

A small mounting surface to mount your modmic to your pair of Sundaras. Bonuses Allows avoiding mounting directly to the headphone cups. Allows the mic to swivel slightly left and right. Hardware 2 x M3 16mm flathead screws (I used…

Pobrania
53
Polubienia
3
Ocena
0
P
PrintablesArgo

HifiMan Volcano Grill for HE6 HE-500 etc.

Volcano Grill for HiFiMan HE-500, HE6 etc. for more open sound stage. Does fit the original retention ring without issues. Prints without supports.

Pobrania
49
Polubienia
1
Ocena
0
P
PrintablesRyan

HIFIMAN HE400SE Headphone Stand

This is a headphone stand i modeled to fit my HIFIMAN HE400SE headphones. It can print without support. I printed mine on my Creality k2+ in PLA-CF. I included the F3d archive so you can modify the design. I included 2 versions, one that…

Pobrania
49
Polubienia
5
Ocena
0
P
Printablesqwix

HIFIMAN yoke (HE400i)

replacement yoke for Hifiman HE-400i

Pobrania
48
Polubienia
1
Ocena
0
P
PrintablesA S

HiFiMan HE400i 2020 plastic ring

If you have broken the plastic ring (like i did) or you want to customize the HiFiMAN HE400i ver.2020 you can easily print this using PLA or PETG, no brim, infill or supports required, prints very fast and fits perfectly (be aware that…

Pobrania
47
Polubienia
4
Ocena
5
P
PrintablesFlatSoul

Custom Grills for HIFIMAN HE6se / HE400se (3 Types)

Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…

Pobrania
42
Polubienia
2
Ocena
0
P
Printables00Nave198

Hifiman Sundara Modmic Mount (M3 cap head, nylock)

This is a remix of lionpants' original modmic mount, but adjusted for M3 10mm cap head screws Changes to Outer 4mm counterbore for M3 10mm cap head screw Changes to Inner 4mm captured nut (extended from 2.4mm) for M3 nylock nut as opposed…

Pobrania
37
Polubienia
3
Ocena
0
P
Printablesm87

HiFiMAN Dust Caps

Simple dust covers for HE400se headphones. If you have any furry friends (dogs, cats etc.) in your home this is a must have. Material/Temperature TPU @ 235 °C Nozzle 0.4 mm Layer Hight 0.2 mm Top/Bottom Layers 4/4 Speeds…

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesStar Foundries

Headphone Stand compatible with Hifiman Deva Pro Wireless and other audiophile headphones

I wanted to print a headphone stand for my Hifiman Deva Pro Wireless, but there doesn't seem to be any models made particularly for it. So I turned to generic headphone stand designs, with my two requirements being (1) the headphones must…

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesMayAudio

Hifiman yoke for Capra Headband v3

Simple yoke made for my Hifiman Ananda Stealth to use with the Capra Headband v3. To use with the stock screws from how the stock headband is secured, but you can use your own. Print with PETG. Link to the Capra Headband v3 made by Brian:

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesBMsquared

Hifiman Egg-shaped Headphone Stand (HE1000/Arya/Edition XS)

I wanted to create a printable version of the included foam stand that Hifiman provides with their egg-shaped headphones. I traced the original foam and created a 3D model, added a little hanger for the headphone cable. Print settings:…

Pobrania
28
Polubienia
4
Ocena
0
P
PrintablesJussi Aro

Bushing for Hifiman HE400i headphones

I printed with MK4 and vase mode. Prusament PLA. Designed with Autodesk Fusion 360

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesArkku

Hifiman HE pentagram/star grille mod for headphones

Pentagram Grille Mod for Hifiman HE6SEv2 Headphones Introduction Hifiman HE6SE v2 headphones, as well as other Hifiman HE-series headphones that share the earcup design (at least HE400), benefit from the “grill mod”, i.e., either removing…

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesRecords じん

Protective case for HiFiMan Edition XV housing

Printer: Ender 3 V1 with direct drive mod Slicer: Orca Slicer 2.3.0 Print settings: 0.2 mm layer height, 100% infill, no brim, skirt Material: eSUN PLA+

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesSumDoot

Hifiman HE400S headband

My original leather headband broke and i didn't really want to look for a replacement online, so i printed one instead, seems quite comfortable on my head. I made it quite wide to try and minimize the "headphone dent" problem, seems to…

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesMaciey

Hifiman Headphone Dust Cover

Hifiman Headphone Dust Cover

Pobrania
21
Polubienia
5
Ocena
0
P
Printablesilluminati

Hifiman Arya Stealth wall holder

Headphone holder for Hifiman Arya Stealth. Will also work with many other headphones as well. I used eSUN PLA+ with 40% infill. No supports. No raft.

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesGarpDesigns

HiFiMan HE400i EarCup Holder

Not as nice looking as the originals that shattered (on there own!) but they work great. Supports: Yes Resolution: 0.2 Infill: 100% Notes: I used supports just for the connecting end but depending on your printer / experience you might…

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesMarosh

Hifiman HE4xx earpad conversion kit for regular earpads (parametric model)

Simple printable adapter ring for Hifiman HE4xx (HE400se, HE400i, HE400S) that allows mounting standard round earpads (e.g. 100–110 mm aftermarket pads like Dekoni, Brainwavz, Yaxi, etc.). Replaces stock mounting system → easier pad…

Pobrania
14
Polubienia
1
Ocena
5
P
PrintablesTom Urlings

Hifiman HE560 earpad spacer

After recently purchasing a set of used Hifiman HE560 headphones, I found that after a while the inside of the drivers was pushing on the outside of my ears. A simple solution is to add a little space between the driver and pad, which is…

Pobrania
12
Polubienia
0
Ocena
0
P
Printablesmhwlng

Headphone Stand for Hifiman EF500 DAC/Headphone amp

Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesArmored Soul

Hifiman Arya Cable Holder

Helps hold the 3.5mm cable for any Hifiman Arya's with loose connectionsHelps hold the 3.5mm cable for any Hifiman Arya's with loose connections

Pobrania
11
Polubienia
1
Ocena
0
P
Printablessponge

Hifiman headband replacement

Printed with 95a tpu, its a bit wider and softer than the original headband.

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesSlayCC

Hifiman Egg-Shape Custom Waves Grill

A mod I made for my old Hifiman Anandas, should work for Most Hifiman Egg Shape Headphones (XS, Ananda, Arya, etc.). Print flat side facing down. There might be some cuts needed if the fit is quite tight, there's some variating on the…

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesTom Urlings

Bushing for Hifiman HE560 (v1) headphones

Do not use vase or spiraling contour mode. Print at slow speed. As mentioned in the title, these bushings are for the Hifiman HE560 v1 model.

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesRichie Ryulie

Hifiman HE6SE V2 To Susvara Unveiled Mod

I think it's made for the right side? Either way, just mirror it to get the left side. Does it improve the sound? Maybe, I think so. I don't have any measurement tools to comment if it sounds like a Susvara Unveiled or not; my problem…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesBalika4222

Hifiman-Headband

recommended printing with 95A TPU, any layer height should be fine, vary infill and top/bottom layer count for customization

Pobrania
1
Polubienia
1
Ocena
0
P
PrintablesAgentOfFoss

TPU HifiMan Sundara Headband

Replacement strap made from TPU. Modeled by hand using my original (damaged) leather strap as a template. This project includes the main body STL for the strap and a modifier component. You can use the modifier component to adjust the…

Pobrania
0
Polubienia
1
Ocena
0
P
Printables

Headphone Stand for Hifiman EF500 DAC/Headphone amp

Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file

P
Printables

Hifiman HE4xx earpad conversion kit for regular earpads (parametric model)

Simple printable adapter ring for Hifiman HE4xx (HE400se, HE400i, HE400S) that allows mounting standard round earpads (e.g. 100–110 mm aftermarket pads like Dekoni, Brainwavz, Yaxi, etc.). Replaces stock mounting system → easier pad…

P
Printables

Custom Grills for HIFIMAN HE6se / HE400se (3 Types)

Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…