Liczymy pasujące modele…
This 50x50 filler cover fits on the Balconera Series (50 or 80). You get two files: the one with the hole and one without any hole. Please note: despite all Lechuza filler covers look the same on the Lechuza site, they have different…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These were made in Fusion360 and are free to use! The 3M and 5M pulleys have been tested to work on a number of pulley tooth counts however the 8M pulley is currently untested. Please let me know if you use them, if they help, or if…
Two 32 teeth pulleys for 12mm HTD 3M (3mm) timing belt. The pulleys has the hard to find HTD profile and has god grip with the timing belt. One pulley is for the stepper motor 8mm shaft and the other pulley is for the 10mm key indexed…
DaylightDiscoRainbow-Stick-Mounts 2020 Mounts for Daylight/Rainbow/Disco on a stick/XXL/Matchstick that has a nice diffuser and looks prettyish... well, better that PCB's bolted to your extrusions V2 update includes design change to use…
A parametric 5mm pitch HTD timing belt pulley made in Autodesk Inventor. If you have Inventor, you can download the IPT from here and change the "Grooves" parameter to get whatever number of teeth you want. There is also a "Height"…
Simply bolt it on an ordinary 6.5″ hoverboard hub motor and transfer the torque via a htd belt to drive everything you want.
68mm Lufteinlass für GrowBoxen Lässt Luft durch aber kein Störlicht rein/raus 68mm entspricht den standard Lochsägen für z.B. Steckdosen -- 68mm/ aprox 2.67 inch light proof air intake for growbox air passes through but leaves no light…
HTD 3M 20 teeth pulley, toothed portion height - 14mm, inner hole - 8mm, base diameter - 26mm, base height - 10mm
This is an HTD M5 24 Tooth Timing Pulley designed to fit on a goBILDA 8mm REX shaft. STEP files are included so you can modify them as you please.
This is an HTD M3 40 Tooth Timing Pulley designed to fit on a goBILDA 8mm REX shaft. STEP files are included so you can modify them as you please.
First used the 28mm width which was not full width, it shifted to the side. Probably better to use the full width 35mm, and glue with something that will stick well to PETG.
42 Tooth 5 mm HTD 15 mm pulley with 0.5 in hex bore. It has a 1.875 in. bolt circle making it easy to attach to many motion components used in the First Robotics Competition.
Belt driven gear, HTD 5, 120 teeth, 20mm hight
Ahsoka Tano lightsabers holder "Rebels" and "Ahsoka" edition. for the exact measurement of the galaxy's edge old edition. with 2 types of bases, 1st regular and the second with place for the batteries so they won't discharge and get…
HTD 3M 16 teeth pulley, toothed portion height - 14mm, inner hole - 8mm, base diameter - 26mm, base height - 10mm
This is an HTD M3 16 Tooth Timing Pulley designed to fit on a goBILDA 8mm REX shaft. STEP files are included so you can modify them as you please.
The only difference between this one and the one over at Stanton Frames is that this one has the hole filled in. This way, I can drill holes to use it in a 9 hole mounting system. EDIT: I've learned how to edit mesh files in Fusion 360,…
72t HT5M 15mm Pulley with Trampa Hypa hub Adapter, for 8 inches pneumatic wheels. Pulley printed in Alloy Nylon 910 - 50% infill and 6 layers Top/bottom/walls. Adapter printer in Advanced PLA 100% infill. It takes me a lot of time and a…
This is an HTD M5 12 Tooth Timing Pulley designed to fit on a goBILDA 8mm REX shaft. STEP files are included so you can modify them as you please.
Made it for a DIY e-bike inspired by Tom Stanton's first iteration. A 3-piece split version is also provided, made for Ender 3 v2 bed, one at a time. The 1-piece version should fit Neptune 4 Max print volume.
This is an HTD M3 18 Tooth Timing Pulley designed to fit on a goBILDA 8mm REX shaft. STEP files are included so you can modify them as you please.
This is a 40 tooth HTD 8M pulley with a 5/8" shaft mount hole with a 3/16" keyway slot That I created for an external oil pump.
140t htd pulley for 5mm pitch 15mm width belt. Designed to be mounted to bicyle wheel with zipties. Made for Tom Stanton inspired ebike builds. Print settings Infill : 40% support : no speed : 50mm/s walls : 4 lines printer: Creality…
NOT for HV wiring! Check your local laws for the use of materials etc. for cable covers! There are only a few filaments that you should use for high-voltage covers. PLA, PETG, ABS, ASA, etc. are NOT suitable here! Cover and clip are just…
Einfach aus Flex drucken. Viel Spaß damit. ;)
Dieser Deckel ersetzt das Originalteil des Gardena OS 140. Er schließt bündig mit dem Regnergehäuse ab und bietet die exakte rechteckige Aussparung für den ausfahrbaren Schwenkregner. Ideal als Ersatz für verlorene oder durch den…
43th HTD 8m chamfered Gear with a 5/8" center shaft hole with a 3/16" keyway
Sbírka řemenic profilu HTD 5. Používané v rámci soutěže First Robotics Competition, mohou být využité i v rámci výuky.
You need to print 2x of both the top and bottom clamping plates. Bolt a set of blocks to each end of your belt using 10-32 hardware, and then use longer 10-32 bolts to pull the two blocks together. Washers recommended to help distribute…
Another model from the Dungeon of the Mad Mage that I couldn't find elsewhere. I've got him at 28mm in height on a 25mm baseplate. He has a throwing hammer and some unarmed attacks. His statblock looks pretty nasty overall. Definitely…
24 teeth timing pulley for 19mm shaft and 6mm key. Belt: 15mm Has a 2,4mm bore for a m3 grab-screw. Printed with 100% infill.
Designed to be used with 0.5" hex shafts with support for WCP-1121 3d print adapters to add even more support. Tested to be a nice press fit :)
A simple HTD 5M Sprocket. It can be easily fit on to a bycicle Wheel with zip ties. Print on 98,5% scale for belt fit. For use on my Ebike. Print the outter ring to adjust the scaling.
Pulleys with Hex Center designed for HTD 5 Belts. Motor specific files have lip to ride on inner race of bearings to not have wear. Number of teeth inserted on side of the pulley.
Oddly I needed it off-centered. Print instructions Licence: Creative Commons - Attribution Category: Robotics
V řemenici je otvor 4mm k motorům GA25-370. K zajištění řemenice k motoru vložte do vybrání v řemenici matici M4 a přitáhněte červíkem M4.
Pulleys designed to be used in FRC, specifically used with HTD 5 belts. Number of teeth inscribed on side of pulley
Uses 2x ⅝” OD bearings. R4 bearings If using a standard number #10 bolt use ¼” OD 0.194” ID aluminum tube as a spacer https://www.mcmaster.com/catalog/129/190/9390N12 You can use a 1/4:” shoulder, 10-32 bolt which is the preferred option…
Dies ist eine Kalibrierhilfe für eine Schichtdicke von 04mm bei einer 0,6mm Düse mit den Maßen 170x170x0,8mm. Ich habe noch zusätzlich einen Brim drumgelegt um die verschiedenen Dicken ausmessen und nachjustieren zu können Print…
A 36 tooth pulley to fit a HTD-5M timing belt to attach to an AndyMark Hex Hub. Made using FreeCAD's timing pulley maker. Designed by EthanW-27 for the Compass Robotics team.
A belt tensioner with two idlers that clamps over the belt. Great for when you can't mount an Ider pully. Is adjustable from about 2" all the way to the belts touching. uses 1.125" OD hex bearings mounted to Churro Hex Shaft. The thick…
Here is the XXL-version of the diffuser for the Klarus XT21X flashligt. :-) Handy when you need to turn all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage, in the garage or on that…
Herbst Zauber – Leuchtdeko im Häuschen‑Design (3D‑Druck) Bringe gemütliche Herbststimmung in dein Zuhause mit diesen stilvollen Herbst‑Zauber‑Häuschen. Die beiden Deko‑Laternen sind so gestaltet, dass warmes Licht durch die Lamellen…
Layer Height 0,15 wall line count 4 top layer 1 bottom layer 1 indfil 0% print speed 70 mm/s (reduce speed if necessary) use brim use fuzzy skin (for diffuse effect) PLA Filament – 1,75mm – Neutral/transparent
to improve torque off-road for ace MT 200 tire
This is a 17 tooth timing belt pulley. It fits HTD-5 timing belts and will slide on a 1/2" hex shaft often used in FRC Robots. The extension on the pulley can fit into a polycarbonate tube from AndyMark. This was made using FreeCAD.…
This is a 24 Tooth timing belt pulley for HTD-5 timing belts. It fits onto 1/2" hex shaft that is common in FRC robots. The extension on the pulley fits inside a Polycarbonate tube from AndyMark (their silicone roller kit) Designed by…
Riemenspanner für HTD-3M Zahnriemen. Speziell für die Shapeoko2 DIY-CNC-Fräse Die benötigten Schrauben sind 4x M3x20mm Print Settings Printer: Dremel 3D20 Rafts: Doesn't Matter Supports: No Category: DIY
Here is the diffuser for the Klarus XT21X flashligt. Handy when you need to turna all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage together with the Klarus Fottstand that you can…
HTD-5 24 teeth timingpulley for 15mm shaft with 4mm key. Belt: 15mm Has a 2,4mm bore for a m3 grab-screw. Printed with 100% infill.
Here is the link to the Onshape file where you can configure the pulley or make a copy of the 3D Geometry to meet your specific needs. This file was originally designed for use in the FIRST Robotics Competition (FRC) using ½" hex shafts.…
An HTD 3M timing pulley pair, 40 and 60 teeth, printed and run on an HTD 315-3M belt. Both 5 mm bores carry a D-flat under one M4 set screw in a captured nut, the 60-tooth pulley runs on six spokes, and both print their flanges in place.…
Verleihen Sie Ihrem Zuhause eine stilvolle Atmosphäre mit meinem modernen schwarzen Teelichthalter! Entdecken Sie die Eleganz des Minimalismus mit meinem modernen, runden Teelichthalter. Dieses stilvolle Accessoire ist nicht nur ein…
NOT TESTED YET/ loaded in use - belt fits Pulley with HTD profile for 5M 20mm belt, separated in two parts for easy printing. Model was printed from black ABS, little bit sanded, glued and bolted together by M4 x 35 BHC screws, 4.3 x 20 x…
Hub Meepo Cyclone, truck Meepo 3-Link (2025) Řemen Htd 5m 20mm Řemenice 25mm šířka Ložiska kola original Meepo pro 10 osu 6900 10-22-6 Ložisko Řemenice 16100 10-28-8 mm Šrouby 5ks 4x40mm Spacery original Meepo přiložené k truckům 10mm,…
Am besten drucken sich die Arme im Pulk über 9 in der Kabine (Enclousure). Prusa PETG (mit Glykol) ist sehr viel Kälte- kerbschlag-fester als herkömmliche alte PET. Alte PET kann man gut aufbrauchen für kürzere z.B. 10mm Arme! Monochrom…
Timming pulley HTD 5M 15mm for timming belt.
i made this to repair the tiny plastic arm that broke inside the pinky axis on the flight stick. you may have to do some light filing on it.
the pogo connections ended up digging into the contacts over time. i made this plate to make it thinner and thinner till i get a solid connection again.
NOT for HV wiring! Check your local laws for the use of materials etc. for cable covers! There are only a few filaments that you should use for high-voltage covers. PLA, PETG, ABS, ASA, etc. are NOT suitable here! Cover and clip are just…
Hub Meepo Cyclone, truck Meepo 3-Link (2025) Řemen Htd 5m 20mm Řemenice 25mm šířka Ložiska kola original Meepo pro 10 osu 6900 10-22-6 Ložisko Řemenice 16100 10-28-8 mm Šrouby 5ks 4x40mm Spacery original Meepo přiložené k truckům 10mm,…
Here is the link to the Onshape file where you can configure the pulley or make a copy of the 3D Geometry to meet your specific needs. This file was originally designed for use in the FIRST Robotics Competition (FRC) using ½" hex shafts.…
The Weeknd LEG 5 AHTD 2025 Mask
