1028 modeli
This Silica Box is for the AMS Hydra Mod , but it also works perfectly with the standard AMS. It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Print instructions: I printed all the tools in PLA and they're holding up perfectly fine. The ideal thickness of the caliper alignment tool is 0.35mm. So set your first layer to 0.2mm and print with a layer height of 0.15mm. I printed…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Description This is a modular herb dryer/dehydrator with stackable shelves and sliding trays. This dryer uses passive airflow to dry out herbs gradually and doesn't require a heat source or electricity. Instructions Printing This is a…
Wydruk około 2,71 €–3,31 € nettoWstępna wycena jednego wariantu
A Fire Hydrant with a Peeing Dog.
Wydruk około 5,73 €–7,00 € nettoWstępna wycena jednego wariantu
silicagel remain dry when the dehydrator is on and keep dry the filament spool when the timer is off. I never reminder wich temparature and time used for different filament for this reason I include the requirement fromt the manufacturer…
Wydruk około 4,22 €–5,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I previously used a large spoon to aid drying out my Camelbak bladder, but it wasn't that good of a solution. This design isn't anything fancy, but it does a great job of holding the walls of the badder apart to dry it out. I printed it…
Wydruk około 5,24 €–6,40 € nettoWstępna wycena jednego wariantu
This is a collection of magnetic attachments for a hydration pack tube, to easily secure it on your backpack. I have a Osprey hydration reservoir that comes with a hose magnet kit , however, the part you put on the backpack is designed to…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No supports. No fasteners. Just four sections that slide together. Allows me to use my old dehydrator to dry my filaments before or after use and still use it for drying food. This is not a solution for those that want to print from a…
Wydruk około 3,40 €–4,15 € nettoWstępna wycena jednego wariantu
It fits the sawyer squeeze to the hydrapak ultraflask (speed 600ml) threads. printed without supports, adhesion, and no cleanup. hydrapak threads: pitch 3.4 mm
Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu
Printer settings: 0.4mm nozzle 0.3mm layer height 15% gyroid infill PLA+
Wydruk około 4,74 €–5,79 € nettoWstępna wycena jednego wariantu
A holder for the tube of a Hydration Pack (Such as a Camelbak) with tube diameters of ~10mm (0.39 in). Made originally to hold securely to multiple layers of fabric such as two t-shirts.
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a design for modifying a COSORI 11.62" Food Dehydrator CFD-N051-W; 350W--will NOT fit the Cosori CFD165FD 13.8" 450W model! . The shell allows drying two spools of filament at a time. I used Polymaker Transparent PETg. On the…
Wydruk około 6,37 €–7,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modeled like the original to print top side down, with supports only in the window for the sensor.
Wydruk około 12,14 €–14,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
doporučuji tisknout z pevnějších materialů jako je ABS, PETG, PC,…. podpěry nejsou třeba pokud se vetší díl tiskne pod úhlem (na skosenou plochu) ----------------- I recommend printing from stronger materials such as ABS, PETG, PC,….…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Une petite boite pour sécher les appareils auditif. 31.1 de diamètre et 12.7 d’épaisseur. Résolution→0.2 mm remplissage à 40% 3 ou 4 grammes de silice suffise IMPORTANT! Pour créer la grille, les périmètres suivants doivent être définis :…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
This is a remix of the 10.3 inch Dehydrator Filament Ring by bbasiaga on Thingiverse. Resized to 11.4 inches for products like the Elite Gourmet dehydrator sold on Amazon. Prints in 4 pieces which interlock together.
Wydruk około 8,44 €–10,31 € nettoWstępna wycena jednego wariantu
This model fixed my sinking office chair for good. Simply remove the clip on the very bottom of the chair holding the piston in place. The shaft/piston is easily removed from the chair legs/base. Slide the printed part on the shaft. Put…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Učební pomůcky obecně - aslespoň ve fyzice - nejsou zrovna levné, ale ceny za model hydraulického lisu považuji za výsměch. Schválně se podívejte sem: https://www.pierron.fr/presse-hydraulique-simple-hydropress.html, nebo sem:…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
100x160mm sign, advertising ACME Dehydrated Boulders, as seen in cartoons. Just add water for an instant calamity. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
The steering cylinder on a Garmin TR1 autopilot needs to be cushioned with little plastic bushings so as to prevent metal on metal and the associated corrosion that comes with that. The original bushings are hard to get. Use the slicer…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Update August 5, 2026 Hydra has been updated to version 1.13. Changes: Improved split design,…
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
This model has been submitted to the Prusa Printers tabletop games contest! Just to show it fits the Criteria its: Printability : Been printed in FDM and resin. Here is a gallery of my patrons who have printed it in both materials:…
Notice! This version is obsolete. An updated version compatible with both stock and all Hydra versions is available here: https://www.printables.com/model/1633611-high-capacity-ams-silica-dry-box About This is only compatible with Hydra…
I made this because hydras and dragons are my favorite mythological and fantasy animals. The hydra and dragon is print-in-place without any supports needed. This design is great to give to children over the age of 4 years old. Brim: No…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the older style of AMS feeding funnel that has a slim press button.…
This Slim Silica Box is for the AMS Hydra Mod, but it also works perfectly with the standard AMS.
About The Hydra - Universal Spool Adapter is developed specifically for Hydra but will also work well for the standard Bambu Lab AMS. If you use very narrow spools with this however, Hydra will work a lot better as the feeders are tilted…
Remix to add a handle to the lid. Had to shorten the box to accommodate the lid so you will lose some volume. Includes versions for the rectangular and round hygrometer. Link for rectangular hygrometer:…
I redesigned them mostly from scratch to make them slimmer and fit in th AMS with the new Hydra Pro mod. They're about half the size and fit in the Hydra Pro AMS like a glove. The convenient knurled tab on the back make it a breeze to…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Hydra PRO I've teamed up with a few different stores around the world offering the printed…
Notice! This is only compatible with original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Notice, this design is for the newer style of AMS feeding funnel that has a thicker press button.…
Update 2023.11.18: I've added a Fusion 360 paramaterized model of the side walls, so everyone can mix and match the design to match their specific food dehydrator. It has been only teste for certian combinations, so the model still may…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
This is a highly detailed sculpt of the Hydralisk from StarCraft 2 HOTS. The base model was ripped from the game and the high res detail was manually resculpted by me, based on the character normal and albedo maps. the post was matched to…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Important! This version is obsolete , please use the new Hydra available on the page below, it has an updated design with removable/reversible spool guides as well as PTFE tubes replaceble from top: Hydra AMS Notice! This is only…
This is an extension piece for SilverCrest food dehydrator (SDA 350 A2) bought from Lidl Finland in 2019. Apparently this also works with a similar looking 2020 dehydrator model from Aldi Süd (Germany) according to a comment . I made this…
Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…
Hydra mount Remodeled to be stronged when 3dprinted and easier to print, made for airsoft Uses m5 nuts and bolts(at least 30mm)
The Lernaean Hydra (or Hydra of Lerna) is one of the most infamous and popular creatures from Greek mythology. Known for its multiple regenerating serpentine heads, this hydra originates from the second labor of Hercules. Though often…
A modular moss pole with built-in drip irrigation for Monstera and other climbing plants. The pole screws together in sections, so you can extend it as your plant grows. A watering funnel on top lets water wick down through the moss — no…
BambuLab AMS 2 row Vase Mode desiccant containers. It addresses all my pain points from the many other AMS dessicant containers that I have printed. You can fit 6 of these confortably in the AMS, 5 if you choose to replace one of them…
A hydraulic piston looking abdomen armor for Dummy 13. This is a hard print, it'll probably not work on 100%-150% builds, and will need supports. The looks are worth it, though.
Summary This is a easy-to-print 1:24 scale model of a hydraulic car jack. Print Print with 0.1 layer hight. No supports are needed. Use 3 perimeters and 20% infill. Dimensions at 100% scale (1:24) Height: 42.3mm Width: 16.5mm Length: 39mm…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I remixed Thomas' model by removing the chamfer on the rear. Doing so stops the silica boxes from rocking or falling backwards, hitting the spools. They still fit fine on my stock AMS as well as the Hydra, and slide right in, but they'll…
Update: There are two versions of inserts now. The original size fits the 32oz thermos. There is a shorter version for the 18oz Hydrapeak food jar. I designed a custom insert capable of securely holding 20 vials, with the option to hold…
Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…
Simple ring extension for a food dehydrator which makes it usable as a filament dryer. Suitable for a 32 cm diameter dehydrator. A 90 mm wide spool fits inside the dryer with one ring extension. The rings can be stacked up to get a higher…
This model is a remix of previous fantastic works, it fits the corners of the AMS to be able to hold a bit more dessicant inside the machine, it also has a matching lid with handles and a matching funnel. All has been adjusted in size…
A M5 bleeding funnel for Shimano hydraulic brakes. Allows you to remove the air from the braking system. I tested it with SHIMANO BR-MT420 brakes. Another tool for bleeding breaks you can find in my models. If you like the model please…
Scale fire hydrant for dioramas or RC garages. https://youtu.be/VVHZKwp_cmw
About This is a remix of the Hydra - Universal Spool Adapter but instead it has a solid core instead of openings for silica desiccant. It's a user requested remix for adding weights in the spool core instead of silica. The pictures below…
This brake tool is easy to use. This brake tool is an essential tool for any bike owner or mechanic. A brake tool suitable for bike hydraulic disc brake calipers, which can compress your piston within seconds when replaced. It is designed…
This model has been submitted to the Prusa Printers tabletop games contest! Just to show it fits the Criteria its: Printability : Been printed in FDM and resin. Here is a gallery of my patrons who have printed it in both materials:…
Hydra Fan Duct & Tool Change System for Ender 3 Ender 5 & CR10 See Below for Updates, V6 Edition Here: https://www.thingiverse.com/thing:4253359 Firstly many thanks to AlfaBarion for suggesting such an incredibly clever name for this…
an hydraulic pump designed to empty cans of HV46. tested with water and mineral oil use it with a drilling machine updates will come P/S in BSP 3/8
psst....*whispers" hail hydra ;-) Print each piece as flat as possible with supports and a raft. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Update August 5, 2026 Hydra has been updated to version 1.13. Changes: Support for (upcoming)…
https://youtube.com/shorts/Jw6yVkRwt7k https://youtube.com/shorts/EY8BV4jkzCg This is a working, fully 3D printed ram pump! I used PLA for the main components and 95 shore TPU for the seals and valves. It has garden hose threads on the…
There are 150mm and 200mm height options. Optional drip tray.
A fire hydrant container with a simple screw on lid. Printing Designed for 0.2mm layer heights and 0.4mm line widths. All parts can be printed without supports. Assembly Secure side and front outlets with glue or M3 bolts (up to 8- 15mm…
I have a roof rack with a thru-axle mount, so the bike rides at the top of my car with the front wheel removed. I've added a simple loop to the end of this brake caliper spacer, so that I can thread a rubber band through and wrap it…
This Can Holder is designed to resemble a fire hydrant. All parts are print in place, no supports are needed! It holds a standard 12oz soda can. The lid snaps on and has a hole for a straw. An extender is available to fit a 16oz can.…
Belgian water hydrant for steam locomotives. scale 1:87 for H0 This is what I believe to be the Majolini version, likely often modified to have the valve at the base of the hydrant. Dimensions come from an old book “Manuel du piqueur des…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill pattern: Archimedean Chords Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the…
While the filament form GST3D is super cheap and works pretty well I had a lot of trouble together with the Bambu Lab AMS. I have the Hydra Mod, But I assume the same problems are true for the vanilla version. There is a ring adapter, but…
I needed a simple way to hang my water bladders out to dry. So far this fits two different CamelBak and one Osprey. Printed in Hatchbox Yellow PLA at .2mm and 50% infill
Pipe clamps DIN 3015 (fastening - welding) [6-102 mm] Based on Stauff's models
A Adult False Hydra. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://mz4250.com/ Patrons have access to all my files in one place, a request…
Introducing The Bladder Buddy, the innovative 3D printed solution for drying your Camelbak or other hydration bladders quickly and hygienically. This unique hanger features an internal expanding mechanism that securely holds the bladder…
Notice! This is only compatible with the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Hydra PRO I've teamed up with a few different stores around the world offerering the…
These are used to seal hydraulic flange fittings while performing a repair. They help to keep oil in and contaminates out. There is -12, -16, -20, -24 and -32 sizes available, These should all be able to be used with code 61, 62, and Cat…
1/43 scale model of a hydraulic ramp. easy print, simply print it 2 times and press the lifting fork into the pillar in the desired hight. Print Settings Printer: Geeetech A10 Rafts: No Supports: No Filament: Enotepad PLA blue Category:…
brake bleed cup for hydraulic bike brakes
A hydra-like tree. Should print without supports. Printing at the largest size possible and at the highest resolution will give you the best chance of having a good print. Please "like" this file if you collect or download it. Category:…
Solve the initial puzzle, assemble the robot following the instructions in the .PDF file, understand the basics of mechanics and its problems, once assembled, solve the kinematics problems that engineers have to face to make a manipulator…
UPDATE Nov 01, 2021 I've had issues trying to print these with PETG. I've changed the cylinder and piston to be oval so there is less overhang in the clearance area between them UPDATE - Feb 24, 2021 Uploaded a V2 version with more…
This is used to install a new insert & olive if you shorten your hydraulic hose lines. It lets you grab the hose while you tap in a new insert without crushing the hose. How I Designed This Based on a pair that came with my rear hydraulic…
I believe this works for Tiagra, 105, Ultegra & Dura Ace - Shimano calipers that use K series brake pads It also works for Altus BR-UR300 calipers - or calipers using B series brake pads.
I scanned this in the neighborhood. It's shared here rescalled to fit a prusa mini (scaled down to 1/5th scale). The original is about 29.5" high
A little project of mine to convert a food dehydrator into an Active Dryer Spool Holder. All parts should be printed in PETG, 3 perimeters, 30% infill, 4 top and 4 bottom layers. everything prints without supports. Printing the top and…
This is an interlocking sidewall extension for Cosori digital food dehydrator bought from Amazon (Model # CFD-N051-W). Measures 293mm diameter. Inspired by other dehyrator extensions, this allows use of the trays without modifying the…
Since I met 3D technology in 2010 dreamed of my own 3D printer, and my first project was ... hydraulic turbines. I have a good reason: a farm with 16000m2 with a small flow of water, my goal is an open source micro-hydro installation. My…
A simple MOLLE attachment to clip an hydration bladder tube onto your backpack shoulder strap. Parametric design included so you can tweak it to your requirements if needed. The default supported tube diameter is ~10mm.
This is a homebrew monster which was submitted and voted on by patrons over on my Patreon Page . Deathcap Hydra Submitted by: TimeSpiralNemesis A Mushroom Hydra named after the extremely potent Death Cap mushroom. A smaller variant of…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Hydrapple 5 heads, Tabletop DnD miniature with or without 25mm medium base which can be used for…
Stable adapter for usual hydraulic lifting jack which fits for BMW i3.
About This is a funnel for easily filling the Hydra - Universal Spool Adapter with silica gel. It was designed so it can be easily be placed on top of the spool adapter and it sits in place unsupported, meaning you don't have to hold it…
Print two of these for a Hydrapeak 32oz container. Each one will hold 20 3ml vials. At the end of the day, this was designed to solve a number of issues: Printing without supports Better vial clearances with or without vial labels Deeper…
Bring a piece of the city into your workspace. This compact fire hydrant model is quick to print, fun to paint, and instantly recognizable — great as a desk decoration, diorama prop, or photography accent. It’s modeled for clean lines and…
Containers for Bambu Lab AMS Hydra desiccant, with digital thermometer slot, lid with magnets and handle to insert and extract the container. perfect for replacing AMS desiccant packs when converted to Hydra…
