140 modeli
Remixed from the break-out board - I'm using USB B cables for a more positive, robust connection for both my model Ms I'm doing internal soarer's converters using Arduino Pro Micros connected to the original IBM controllers. USB from the…
I designed this set of models to be replacement parts for the 1995 IBM ThinkPad 701C and 701CS laptops. The attached 3MF file is a project file created in OrcaSlicer that has everything laid out. I've also attached the STEP files as well.…
This is a 3D printable version of the 44T2216 hard drive caddy for IBM/Lenovo xSeries servers. It can hold a 2.5-inch SAS/SATA/SSD drive and fit into the server’s hot swap bay. It has four screw holes for securing the drive and a handle…
Compatible for (at least) these IBM servers: X3550 M4 X3630 M4 X3650 M4 X3850 X5 X3950 X5 Fits 2.5" HDDs and SSDs with a maximum height of 15mm. Included is a version that requires (countersunk) screws and a screw-less one that clips into…
I found these designs on Github.com and turned them into STL. The SCAD is also included so you can do what you want with it. I have contacted the designer but never got a reply.
Replacement Shift keycap for cloned Model M ("Sunnytech KB-5191")
Detailed printing and assembly instructions on Instructables Update 1/3/2023. Alignment groove between pieces enlarged Display Front pieces realigned to face downward to bed. This requires a bit of support but keeps the front lip uniform…
YOU PROBABLY SHOULDN'T PRINT THIS! Update, July 7 2023: Dave Hayden took the resin-printed typeball concept and improved on it greatly . I'm extremely grateful that he took on all the hard work of iteratively going through and dialing in…
THIS MODEL IS NOT "PRINT AND USE" , some handwork is needed to make it one piece. The difficulty level is above average due to very small size of some elements. Assembling instructions and demos can be found here:…
Compatible for (at least) these IBM servers: X3550 M4 X3630 M4 X3650 M4 X3850 X5 X3950 X5 Should fit any standard 2.5" HDD or SSD. Screwless model only, compatible drives will slot right into place and grip is very good provided your…
This is IBM PS/2 Model 30 286 (8530-E21) that was presented to the public in 1988. It was my first computer and I used it from the mid 1990's till the beginning of 2000's, when too many programs started to state that they needed a 386 or…
A minimalist keychain with the iconic IBM logo. Un porte-clés minimaliste avec l’emblématique logo IBM. Print Settings Printer Brand: DAGOMA Printer: Discoeasy 200 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: Chromatik…
I really like the font and texture in IBM Model M keyboards, but needed a much smaller keyboard for my home office. I had saved a set of caps from a trashed Model M and decided to print some adapters to use them on my Keychron K6. All…
Printing Notes: PLA, 50% Infill, Normal Support for all pieces. I used Tree Support for buttons. Carefully remove all support after printing. May need to use hobby knife to get it exact. Sand all surface pieces for a smoother look. I used…
A replica of the modelfkeyboards IBM model F 1u keycap, with a kailh stem. Fully parametrically designed. Originally created to work with the Adafruit MacroPad RP2040 , but should also work with any other kailh stems. Recommended print…
I got one of these storage controllers for cheap, but it didn't come with a low profile mounting bracket! This design uses two M3 screws, but clearance may need to be adjusted for different printers/filaments.
3x 8mmx3mm circular magnets 1x M4x40mm screw and a nyloc nut (or two standard nuts) are needed to lock the lever 2x M3x40mm and two nuts are for the microswitches 2x quite “standard” microswitches (cherry, omron, or almost everything…
I needed a 5.5 mm bit to disassemble my IBM model M keyboard. It is not a very common size and usually you do not get in sets. I'm providing the FreeCAD file so that you can customize it for you needs. Open the file, tweak the parameters…
Instantly boost your COBOL skills and save the department of labor by turning your Raspberry Pi 3 into a mainframe!! Show all your fellow cobalt-colleagues what you are made of by hacking directly into the mainframe from home. Do not…
This is the thread for a Libman High Power pushbroom: It goes inside the rod and the original hex sleeve goes outside. I used the original self drilling screw. Be sure to put the sleeve on the rod before installing the thread! I used…
You can find the video on the build here!
The assembly can be used to control something using wifi; as a clock or a weather station; as a photo frame. There are a lot of ways how you can use a ESP32 microcontroller with a TFT screen. There is a lot of information about it in…
This is a model of an IBM Personal Computer XT (model 5160) that I've adapted to hold a Seagate portable hard drive. It's intended for retro PC hobbyists to store their data used with projects such as Retro-eXo, RetroArch, and LaunchBox.…
The IBM logo on a rectangle plate. Embossed to allow for a filament color change part way through the print. A version with a small key ring sized hole is also included. Scales well if you want a larger sign or plate, no need to increase…
This is a simply reinforced version of the original IBM keychain logo. Just added a backplate, and moved the hole to the end. Printed with 0.25 layer, 100% infill. Category: Keychains
2D art display for a patent / line art style drawing of the original IBM Personal Computer . Includes a frame into which the picture can be easily snapped. Use a color swap for the line work to add contrast or simply color the lines with…
In addition to the commonly broken display hinges, I also had this latch break on an IBM P70 / model 8573 computer. As a result, the display would no longer stay latched closed. I measured the original part and created a rough replacement…
Little Model of the iconic IBM 729 Magnetic Tape Unit A hollow version of the model that can be used as storage can be found here . The original model is 200mm tall, but you can scale down in your slicer as you see fit.
TL,DR:* This is purely experimental. Try as I might, I can't get an acceptably fine print from my cheap FDM printer. An SLA (resin) printer should do a lot better but alas, I do not have one. Your own custom font IBM Selectric 'golfball'!…
This time, I came into possession of a T22 without the HDD and the cover. So it is only obligatory for me to come up with something just like the IBM ThinkPad 560Z External SD Card HDD Caddy . With this SD2IDE caddy, you can use an SD…
7mm hex driver socket to remove 5.5mm screws in the base of an IBM Model M mechanical keyboard. 3D printing settings Normal PLA. PETG might be tougher. 100% infill. Stand on the 5.5mm screw side, not the hex-driver side.
Finally I had time to update the model with a 2.8 inch TFT that looks pretty much neat. I will not delete the 2.4 inch version because it is much easier to assemble for those who don't have even basic knowledge in electronics and don't…
This is a single slot cooler shroud for an IBM 9240-8i, commonly known as the m1015 SAS HBA. This card is commonly used in Unraid, Freenas, etc for attaching many drives. It's a pretty straight forward print with minimal supports. Parts…
Small tool designed to open the internal case clips on IBM 14L10/15L10 (Aptiva) and similar Monitors. These clips can only be reached through a small vertical opening (see image1). Just insert the tool through these openings, making sure…
IBM Selectric tab pulley (typewriter)
Wanted the legs on my model M to stay up at all times, but they wanted to fold down when i slid the keyboard away from me. This model stops them from folding in. It is not a perfect fit so it still wiggles a little bit, but good enough…
Remixed Selectric tab pulley with thicker walls, bigger tolerances for M3 screws and an additional lower piece that prevents the pulley axle from tilting. Recommend printing it with a high infill and preferably PETG to make it as sturdy…
Changed the to match the Mainframe z16 - 5 part model The remix contains the following changes: The bottom 1mm has been cut off The scale has been changed to 59.25% to match a y-height of 10mm The scale has been changed to 93.33% to match…
The IBM PS2 Model 25 Stand is the perfect accessory for your Hand386 Handheld computer! Print the buttons in blue, the outer bezel in light grey, the inner bezzle in dark grey, and the lenses in translucent plastic. They should press fit…
I used 0.2mm on the print (shown on the pictures). I recommand laying it flat on the exteriors side for a better print.
I printed this front-side down with support at 0.06mm layer height on my Bambu P1S in PLA. I expect a larger layer height of 0.1mm will be fine too.
IBM keyboard key, it's just the forward arrow, but the most important thing is the attachment, i put a .step .
Yes, it is a real standalone PC! All the required hardware is stuffed inside this tiny 1:4 scale monitor. You only need an external keyboard with a mouse, and it’s ready to make your retro dreams come true :) This model is much easier to…
Tall and square holed clip goes on button side, short and circle holed clips go on the opposite side Button printable separately so no AMS/MMU is required and you can remix to make other fancy designs
Two part strain relief for the Model F Keyboard. PETG is recommended, but PLA should be okay.
Bring a piece of computing history to your desk with this 3D printable STL model of an IBM Keyboard. This retro tech replica is perfect for enthusiasts looking to add a classic piece of computing nostalgia to their displays or workspace.…
I bought a box of these chunky switches a while back and have finally found a use for them as the main power switch for my rebuilt Ender-3. Produces a very satisfying sound when flipped. It comes in two parts - the housing, and the lid.…
Printed using 0.6 nozzle with a 0.35mm layer height. Print time ca 1h.45min
A repair part for the IBM PS/2 portable computer for a broken latch/lever/lock of the keyboard. Before you begin, be aware that you have to remove the top of the keyboard case. That is not an easy job. Be sure there are no children…
Snugly mount a Mini-B breakout PCB with room to solder 90 degree header pins. Specs for the breakout PCB: Hole to hole: 16 mm PCB size: 20 mm x 18 mm approx Use 6 mm M3 bolts and nuts to fasten PCB to the print. Print Settings Printer…
WARNING! Only for real IBM enthusiasts! :D Based on the simple IBM keychain logo, added backplate for strenght, and a nice heart. The chainhole is reinforced. Print as you like, but i recommend 100% infill for pocket surviving strenght.…
Model M multimedia keycaps I missed my previous “modern” keyboards multimedia controlls which lead me to remap some keys on my model m to do things like volume up/down. Thats however not an optimal solution as I forgot my mappings quite…
Replacement foot for SK-8820 Lenovo/IBM keyboard. Fits perfectly on my keyboard, even has that nice click Prusa mk3s 0.4mm nozzle 0.2mm layer height 100% infill Print with supports for the locating pins Shown printed in PETG but should…
A copy of the keyboard-foot of the IBM kb-8923. Maybe also suitable for other IBM-keyboards. Measurements without the pins at the side are 34 x 27.3 x 10 mm (WxDxH). Pins 4.25 long and 4.7 diameter. Most pictures are from the print at 0.2…
This is a reproduction of the top bezel of the IBM ThinkPad 730T Tablet computer. You can find more information in my restoration video below:
A model of an IBM 729 Magnetic Tape Unit for storing coins, pens, etc... Top lid is to be glued on. Two top lid styles available; piggy bank and solid lid.
The enclosure is designed to accommodate an IBM Model 35P1976 or 35P1972 LTO-6 tape drive "full height". It will also be compatible with LTO-5 drives of the same form factor, and probably older and newer generations. These LTO drives are…
5.5 mm socket for opening IBM keyboards. Tested in a SSK keyboard. Only usable with a 1/4 socket wrench. My recommenation is to print two parts at the same time, to improve the cooling on them. Tested in PLA with no infill and 5-6…
Removed horizontal piece, not required for strength. This allows you to arrange the caddies on the bed to print 3-4 at a time.
A collection of retro computing and gaming logo clog charms to customize your shoes with classic tech history. This pack includes 4 iconic logos: - Atari: The classic "Fuji" logo. - Commodore: The famous "C=" emblem. - IBM: The legendary…
These two parts replace elements of the keyed locking latches used to retain the side panel of old IBM server racks. I bought the rack second hand without the keys and needed a solution to retain the side panels after drilling out the…
NLX AGP bracket to suit IBM 300PL - possibly others An NLX motherboard is a motherboard form factor, short for "New Low Profile Extended," that was created by Intel in the 1990s to replace the older LPX design. Key features include a…
This is the printable box for Pragotron/Elektročas/IBM pulse generator. use PETG, 0.2mm, 350g, full filling The main power supply is done by 24V external source (either use a 24/2A rectified transformer or the original Pragotron ZZ24…
This is a 3D printable remix of “Tenkeyless keyboard palmrest” by me. I've added an extension to place in the middle, so it will be wide enough to fit an IBM Model M (49 cm). Print the 2 halves and the extension, then put the extension in…
Replacement motor fan for IBM Selectrics. You can download the .blend file and use the CAD Sketcher addon to modify the diameter of the hole if it doesn't fit. If you lost the metal clip for it you can use 2 M3 screws to fix the fan on…
Here is my attempt at replicating the pushbutton insert for the IBM SYSTEM/360 and System/370 mainframe computers that were popular during the mid-1960s to late 1970s. These machines had operator consoles with numerous switches, lights…
The IBM Model M is great, but the little clips on their SDL cables tend to break. Once this happens, the cable doesn't like to stay in the keyboard. Replacement cables are really expensive! Instead, this clip slides over your connector…
This hook is to hang a mop above a bucket, suspended from the side of a tall cabinet in your kitchen, closet, or anywhere else you have access to the top edge of a vertical panel. It features a 7/32" hole to accept a round head screw…
Box for iBMS and Smart Shunt connection. All components are in one box, easy to install on the wall using double-sided a
This is a reproduction model of a battery enclosure for the IBM ThinkPad 730T tablet computer. The inside is designed to accommodate 6 AAA-size NiMH cells and 3 terminals. If you'd like to see how I made the terminals, please watch the…
This is a reproduction of the PCMCIA door cover for the IBM ThinkPad 730T tablet computer. For video of the full restoration, please see below:
Place string lights in the slot, put in hook, pull down. Fits on the libman extension pole. Likely fits on other push broom handles. Print on it's side
Drive tray for IBM EXP3000 jbod based on P/N:42R4129 Printed on PLA and tested on EXP3200
Enclosure for common SD2IDE and CF2IDE adapters for IBM ThinkPad 560Z. You can achieve a secure installation and stock look with this enclosure. Might work on other 560 machines or even other ThinkPad laptops. Feel free to test them out.…
I have on old IBM Thinkpad laptop with missing battery. So, I decided to design my own DIY battery for it. I didn't have an original battery so all the information I gather from the Internet and measuring the place for the battery in the…
Retaining parts for IBM Model M keyboard to install a Pro-Micro controller and make the keyboard USB compatible. What is shown is in a 122 key ‘battleship’ keyboard. Top and bottom parts can be printed with supports and cleans well.
This is a reproduction of the original pen holder for the IBM ThinkPad 730T Tablet computer as well as a custom version. 730T_door_pen - this is the original model that has a lever to help eject the pen. This can be difficult to print so…
Copy of IBM FDD handle, because my handle just broke.
Replacement screw cover for IBM 5151 display. Not a very good fit. :(
The IBM 210 “bicycle” correctable ribbon cassette for the IBM Selectric III is no longer being manufactured. Ribbons for the Selectric II (and some earlier versions of the Selectric III) are, however, still in production by some…
This is the model I created from the original IBM ThinkPad 560Z door piece while creating the External SD Card HDD Caddie for the machine. Maybe someone would need this one as well. I think an SLA print might turn out better than FDM.…
After designing the internal HDD caddie for the 560Z , I felt being unable to swap out the SD card is a pain that I cannot get over with. Therefore I designed this one instead! Now I can happily pop one card out and put another in to…
IBM Thinkpad 600 Series HDD Cover
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
Gridfinity holder for IBM Selectric typeballs. Print in your usual settings and materials; I used PLA, you can sub PETG if your typewriter is in a really hot place for some reason. The typeball holders were modeled after the original…
Just a HDD sled to use a cheap mSATA to IDE/PATA board in an IBM x40 Thinkpad. I couldn't find the exact board anymore, but can be adapted to other boards. I included the .scad files, but they are a mess. Good luck.
IBM Logo for office or workshop
I wanted a way to mount a ZuluSCSI into one of the secondary drive bays in my IBM Model 95. The platform in the front allows you to optionally mount a sd card extension where it is easier to access. The mount is designed to use 3mm screws…
ibm thinkpad 390 series hinge support you will need two m2.5x10mm and m2.5x16mm to attach the screen to the housing
IBM Thinkpad 600 Series Floppy Port Cover All ports have a tape underneath that secures the cover to the notebook case and allows the cover to open and close without getting lost. It is necessary to add this tape so that the cover stays…
IBM Thinkpad 600 Series Back Ports Covers All ports have a tape underneath that secures the cover to the notebook case and allows the cover to open and close without getting lost. It is necessary to add this tape so that the cover stays…
I removed the bottom tab as it was too thick for some cases I used the screws that came with the card, I don't know what size they are. The holes are 2,5mm Also check out my Fan Bracket…
Quick repair for Wife's libman mop.
IBM Thinkpad 600 Series USB Port Cover All ports have a tape underneath that secures the cover to the notebook case and allows the cover to open and close without getting lost. It is necessary to add this tape so that the cover stays…
Replacement door bracket for the IBM PS/1 front fascia. The original plastic bracket that supports the front flip-down door is prone to cracking or snapping after 30+ years. This replacement restores proper alignment and function while…
Keytop for an IBM model m keyboard with the IBM logo onto it, ideal for a super (or windows if you prefer) key The model is made to be printed with a resin printed considering the size of the key, the legend is etched 0.5 mm into the key…
Allows you to get just the right height while protecting the fragile orginal feet of the keyboard. The design is made to be held by the original feel but all of the forces would be passed into the case to avoid damdge. Instructions Start…
