17 695 modeli
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…
Wydruk około 6,77 €–8,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
For bigger cabels: https://www.printables.com/model/1203677-gridfinity-cable-organizer-big-cabel-2x3 this is inspired by: https://www.printables.com/model/274250-ikea-alex-cable-organizer but it's completely redrawn with different sizes…
Wydruk około 3,22 €–3,94 € nettoWstępna wycena jednego wariantu
A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…
Wydruk około 12,31 €–15,05 € nettoWstępna wycena jednego wariantu
This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
Simple 9Volt battery container suitable for the Gridfinity system by Voidstar lab. Works as intended. ‘’But hey, what is that gridfinity thing you are talking about?'' This is the masterpiece I am talking about:
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Wydruk około 9,65 €–11,80 € nettoWstępna wycena jednego wariantu
I've created a parametric bottle with a knurled or fluted cap that scales up as large as desired for the Gridfinity system. I've included STLs for some basic sizes, and my Fusion360 Archive file so you can generate your own. I like the…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
Holder for spade bits up to ~1" compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More details…
Wydruk około 3,53 €–4,32 € nettoWstępna wycena jednego wariantu
Holds 16 608 Bearings. Yeah, the same ones you have left over from the fidget-spinner craze 🤪 Because these often have a thin coat of oil, I wanted to add a cover to keep them dust-free, but the lid is completely optional The block is…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Box - Doesn't need supports but I've noticed the screw/magnet holes are not super clean. If this bothers you add some support material there. Lid - Print with the 'Blade" text side down. Should snap closed, might have to clean corners for…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
Wydruk około 3,77 €–4,60 € nettoWstępna wycena jednego wariantu
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
This is a tape dispenser for the Gridfinity modular storage system. It is compact at 1x2 squares, and features cutting teeth that split tape effortlessly. It is not possible to stack other blocks on top. This takes standard 2 inch tape…
Wydruk około 3,53 €–4,31 € nettoWstępna wycena jednego wariantu
Built an “all in one” for my Pinecil soldering iron, CNC Kitchen adaptors, and accessories. I used the Fusion 360 GridfinityGenerator plugin by Lev Mishin for the base model - great resource!…
Wydruk około 8,72 €–10,66 € nettoWstępna wycena jednego wariantu
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Wydruk około 4,76 €–5,81 € nettoWstępna wycena jednego wariantu
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity Tape measure holder
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Socket set for 1/4" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 4,64 €–5,68 € nettoWstępna wycena jednego wariantu
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped A parametric Modell of the standard Gridfinity Box in Solid Edge. If you set a Dimension to 1, the Model gets stuck. So if you want a 1x4 Box, Set 4…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Wydruk około 6,22 €–7,60 € nettoWstępna wycena jednego wariantu
Design description This is a gridfinity holder for 10 LR44 Coin cell batteries. Block area is 1x1, and has a height of ⅓, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
Simple Gridfinity box for index cards and/or 3x5 post-it notes, plus two writing implements. Wells for pens fit regular Sharpie markers, many types of mechanical pencil and our beloved Pilot Acroball-2 black and red pen.
Wydruk około 7,08 €–8,65 € nettoWstępna wycena jednego wariantu
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena jednego wariantu
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
1. Introduction Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use. 2. Revision History Version Description Date A.1 Initial Release 25/06/2024 A.2 Add more variants. Change…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Printed with no support and 25% infill.
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
Wanted a way to find and store my Micron pens better. This is a nice stackable setup that holds them tight while still allowing easy assess. Fully stackable These are pretty customized to the Micron but happy to share the fusion file for…
Wydruk około 5,34 €–6,53 € nettoWstępna wycena jednego wariantu
quick access to scalpel and other tools
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Honestly this remix of this design is way better than mine original. https://www.printables.com/model/659216-gridfinity-tweezer-box-angled-entry Rest your tweezers with style. Gridfinity Yeah, by Zack Freedman - gridfinity.xyz. Box has…
Wydruk około 5,47 €–6,68 € nettoWstępna wycena jednego wariantu
You can use any of represented materials as you would like, free of charge. Вы можете использовать любые представленные материалы как вам хочется, бесплатно. I printed it with these settings / Я печатал модель со следующими настройками:…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…
Wydruk około 4,27 €–5,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Wydruk około 7,58 €–9,26 € nettoWstępna wycena jednego wariantu
If you do not want to ditch your Dewalt drill bit case, then this custom 3x4 Gridfinity holder is for you!
Wydruk około 7,05 €–8,61 € nettoWstępna wycena jednego wariantu
This is a redesign of the dovetail connectors from ‘Gridfinity Master Collection.’ Based on the file name, and the owner of the collection, I believe credit is due to GlitchPrinter for the original idea here. These are slightly smaller…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Dovetail Gridfinity Base - Multiple Dovetail Options
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here's a small 1x1 Gridfinity block that can hold up to 4x Oral B IO brushes. I also made a 2x version as 4 brushes can be a bit tight. On the 4x model the stands are placed so that there's a smaller gap against the wall, where the 'back…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…
Wydruk około 6,35 €–7,76 € nettoWstępna wycena jednego wariantu
This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity Charging Stand for Samsung Galaxy Fit 3. 2 models available: full base shelled base Use organic support on build plate only. Example shown in the picture.
Wydruk około 1,59 €–1,95 € nettoWstępna wycena jednego wariantu
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…
Wydruk około 13,19 €–16,13 € nettoWstępna wycena jednego wariantu
A Gridfinity tool holder for an iFixit Kit.
Wydruk około 3,66 €–4,47 € nettoWstępna wycena jednego wariantu
Get your pliers in order with this Gridfinity 2x2 for your pliers. It holds 4 pliers and is simple to print. This is just one of my contributions to the Gridfinity ecosystem. Now with two types. Hex and Circle patterns. As always a great…
Wydruk około 7,10 €–8,67 € nettoWstępna wycena jednego wariantu
This is a 1x2 Gridfinity bin that holds the Wiha 40010 Magnetizer Demagnetizer. It is standing to keep on the desk and ready to use. It only takes up 2 grid units. If you are not using the Wiha 40010, this model will fit another…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
I needed a solution to solve the issue of my Zyn cans sliding around on the base of my Gridfinity as I open and close my drawer. I designed the holder to be 2x2 as far as the base and it holds 2 cans of Zyn. Print Settings Layer Height:…
Wydruk około 6,49 €–7,93 € nettoWstępna wycena jednego wariantu
I purchased a new USGeneral (Harbor Freight) Series 3 42" toolbox (top and bottom). The top toolbox has wide drawers on the left, and narrow drawers on the right. This model is for a Gridfinity base that fits perfectly inside the narrow…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…
Wydruk około 4,57 €–5,59 € nettoWstępna wycena jednego wariantu
Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
Socket set for 3/8" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
Will continue to add to this collection as I work on it
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
I've been meaning to design a tape holder as part of my quest to Gridfinitize my makerspace. So I came up with this simple and compact yet effective design. Its only 1 part, includes a tool for cutting tape, and you can easily hot swap…
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity bin socket allen key holder Supports allen keys size HW4, HW5, HW6, HW7, HW8 and HW10. Used with 1/4" drive ratchet. The socket holder uses a gridfinity 2x4 bin. Print standing with 10% grid/gyroid infill and no support. You…
Wydruk około 5,37 €–6,56 € nettoWstępna wycena jednego wariantu
Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
A single Hex bin with 2 x 4 Gridfinity and 4.5mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena jednego wariantu
Holder for aluminum setup blocks / spacers and 1-2-3 block compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
Wydruk około 10,22 €–12,49 € nettoWstępna wycena jednego wariantu
This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.
Wydruk około 9,86 €–12,05 € nettoWstępna wycena jednego wariantu
It takes up 3 gridfinity squares so it Is not a suitable size for a real fingerboard, Or skateboard. so there is a small fingerboard that will be printed alongside the ramp I printed it in PLA
Wydruk około 4,30 €–5,25 € nettoWstępna wycena jednego wariantu
Socket set for 3/8" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
This is a simple tool holder, compatible to the gridfinity system. It's easy to print, nothing special here.
Wydruk około 3,27 €–4,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ratchet holder for both 1/4" and 3/8" craftsman ratchets and a spot for a 1/4" bit to ratchet adapter. Fits on the standard gridfinity system. 5x3 cubes.
Wydruk około 5,37 €–6,57 € nettoWstępna wycena jednego wariantu
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Stackable Gridfinity bins and a template filament sample card. Sample Bins The Gridfinity sample bins are stackable for easy storage in drawers. 1x2x6 bin that fits 10 filament sample cards. 2x2x6 bin that fits 21 filament sample cards.…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
I included a 1 and 3 stick stand. I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion. I printed mine at .28 with 1…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Remix of Gridfinity Swann Morton scalpel holder . This model holds up to two scalpels and has space for extra blade storage like the original. Each compartment has a detent, so you can push down on the back end of the scalpel, raising the…
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
Prints very well in PETG with 10% gyroid infill and 3 outer layers.
Wydruk około 1,86 €–2,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Store a Vaporesso using Gridfinity 1x1 Grid. Modified model to store two 10ml bottles of liquid on a Gridfinit here .
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…
Wydruk około 3,96 €–4,84 € nettoWstępna wycena jednego wariantu
Gridfinity storage for a Dymo LetraTag 200B Bluetooth Label printer. Size: 3x3x2.
Wydruk około 4,82 €–5,89 € nettoWstępna wycena jednego wariantu
A gridfinity charger for your Sonicare Toothbrush.
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 1X4X2U bin made to hold 2 Olfa Craft Knives with thumb slot for easy removal of the craft knife
Wydruk około 3,10 €–3,79 € nettoWstępna wycena jednego wariantu
The Nextruder Nozzle Wrench and Nextruder Heater Block Clamp are the most important combination of tools IMHO if you intend to regularly swap nozzles on your Mk4. So, I made this 1x2x4 gridfinity bin to keep them close by your printer.…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…
Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu
1x1 Gridfinity holder bin for threaded insert soldering tips Soldering tips for threaded inserts M2 2-56", M2.5 4-40", M3 M3S, M4 8-32", M5 10-24", M6 1/4", M9 5/16" You'll find it as a kit anywhere amazon aliexpress banggood ebay temu .…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Gridfinity 1x1x5 box with slots for a deburing tool and 3 additional tool tips. I made this model for my teng tools deburing tool (diamerter of 19mm) but could be easily adjusted to fit your own deburing tool size. The tool tip holes are…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are a couple of these out there, but I wanted one that had all the tool heads and the handle in this orientation. Its got magnet holes on the bottom and a chamfer on the top holes to aid insertion . The bin was made using the Fusion…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Gridfinity - Gorilla Glue Organizer 1x2x4 Gridfinity glue organizer. Holds super glue and normal gorilla glue bottles. Prints without supports. Color change at layer 28.2 for coloring in photo.
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Swatch sized to a Gridfinity bin to keep track of various types of infill. Same size as my Filament Colour Swatches . Brother DK-11204 Multi Purpose Label template included in the files. Print Settings in the swatches shown: Vertical…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
This is a helper to make mounting the snap connectors for the Gridfinity base with snap connectors by @Neel_18926 easier. In order to use it (see images) But the snap connectors onto the rail Push them to the center Put the helper onto…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
A Gridfinity bin for the Porter Cable Router Template Guide Set. The set is the 42000, and each of the guides have the cooresponding ID etched into the hole. The gridfinity bin is 4x2. It is for the PORTER CABLE Router Template Guide Set…
Wydruk około 11,01 €–13,45 € nettoWstępna wycena jednego wariantu
Las cajas organizadoras están basadas en una estructura de 55mm, las cuales conforman una cuadrícula 2x2 (110mm) o 3x3 (165mm). Por lo cual los cajones ideales para este tipo de sistemas son los que de interior tengan múltiplos y…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
This has slots for 2x6 magnets in each of the four corners. Just add a “Pause Print" at the appropriate spot, and place them in!
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a nozzle tray for a Prusa MK4 or XL style hotend with silicone sock. I needed a nozzle holder for the complete hotend with thermistor and heater, that also used the sock. I followed the color conventions of the Revo nozzle with…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
