Liczymy pasujące modele…
Based on the metric versions developed by users Boogie and Sneaks, this version is meant to help measure and sort Imperial fasteners, from #2 up to ½" in diameter and up to 6 inches long. It was designed in Onshape. Printing Instructions…
Wydruk około 4,21 €–5,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mini versions of the Imperial and Metric Screw Sizes without the part on the right. Remix of kmccon design.
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
Wydruk około 7,94 €–9,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The bronze dragon was cast in 1842, in front of Duyet Thi Duong gate, Hue Imperial Citadel.
Wydruk około 16,54 €–20,22 € nettoWstępna wycena jednego wariantu
You can use the height gauge to measure and keep track of your settings on any piece of equipment in your shop. Use the ruler in the center of the gauge to lock in a measurement and then setup all your equipment to match the height or…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This deployment dashboard works well in conjunction with the character miniature bases. The dots in each slot tie directly to the identification dot on the bases. There is a deep vertical slot to hold the deployment card and a shallower…
Wydruk około 3,65 €–4,47 € nettoWstępna wycena jednego wariantu
This is a remix of the Player Dashboard by Farlei. It is has a larger card space to allow for sleeved (103mmx128mm) cards and a slot on the side for Condition Damage or Strain tokens. Printed with PLA Layer height: .15 Perimeters: 3…
Wydruk około 4,13 €–5,05 € nettoWstępna wycena jednego wariantu
A simple Imperial Assault player dashboard: Large slot for 1 Hero sheet 3 slots for small cards: hero, item, supply, reward, etc. You can fit at least 9 small cards (more if overlapping cards) I created this dashboard to use with the…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Folding hole gauge with metric and imperial measurements. Metric goes from 20mm to 5mm. Imperial goes from 1-inch to ¼-inch. Use supports (it hardly uses any). I tried to avoid needing them, but I didn't like any of my solutions for…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Screw clamp for clamping screws in a vise. With this clamp you can tighten screws in your vise without damaging the thread. Suitable for shortening or reworking screws with a file or saw. It is for imperial, UNF-srews 1/2"-20; 3/8"-24;…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed a number of the coasters and wanted a holder. This was created by incorporating a coaster into the tube.
Wydruk około 2,68 €–3,28 € nettoWstępna wycena jednego wariantu
The Roman imperial statue in the Abrantes Museu Ibérico de Arqueologia e Arte was found by my friend's grandfather in his field many years ago. We visited the museum a few days ago. I used Scaniverse on my wife's iphone to to scan to a 3D…
Wydruk około 5,90 €–7,21 € nettoWstępna wycena jednego wariantu
Dimensions Length Width Height 1:10,000 scale 160mm 103mm 56mm Version Appearances Ship Stand Imperial I-class A New Hope, Rogue One print_sw_isd_ISD_I.stl print_sw_isd_stand_ISD_I.stl Imperial II-class The Empire Strikes Back, Return Of…
The Imperial Star Destroyer from Star Wars in kit card form. One of the most iconic ships in the Star Wars universe available to print and assemble. Contains 23 pieces that fit together to form this amazing ship.
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
More of my Star Wars kit cards are available at: Millennium Falcon Kit Card Tie Interceptor Kit Card Landspeeder Kit Card Also check out the awesome Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…
This is ruler Measures in both Metric Centimeters and Imperial Inches. As I live in America I found myself needing a ruler in inches (Even though we all know that Metric is the superior unit of measurement) while I could only find ones in…
This imperial drill guide is the perfect helper for accurate drilling with bit sizes ranging from 1/8 – 3/8 . The guide is designed as a sturdy bar with clearly labeled holes , making it quick and easy to select the right size for your…
Works with rotary tools like Dremel, Wen, HyperTough, etc. Attaches using 3/4 threads. Cuts 19 sizes of holes from 2"-6.5" Use 1/8" cutting bits like Rotozip Edits: Added Metric version Added slider insert version that allows the user to…
Modular Corner Jig with option of changing corner Radius Inserts. How it works? Very simple! Just choose insert with needed Radius, put it together with Main Jig Body and secure the insert with a Lock screw. Main Body has a threaded hole…
Printabel Model of an Imperial TIE-Fighter.
An imperial/SAE screw gauge to help sort or measure unknown screws or bolts. Inspired by many others similar designs, this one has raised text to allow a colour change on the top two layers for added contrast. Use the side cutouts to…
Description Parallel Line Scribing Tool A practical tool for drawing perfectly level lines parallel to the surface, eliminating the need for a tape measure. Simply insert a pencil into the desired hole and slide the tool along the…
A thread test block for coarse imperial threads (UNC). You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. I've also made a Metric version for this model:…
Based on Sneaks and Boogies designs. I added an imperial sizer too. Made them the same size so you can clip them together. UPDATE: SEP 2022 - Added a fractional version. UPDATE:MAR 2023 - New Improved Fractional Version…
Here is my personal interpretation of the Star destroyer. I made this model to fit with my previous resurgent class star destroyer. Once finished this model is 53cm long. The model is designed in several parts to avoid to have support…
Warning the text and the body are separate parts within the 3mf to help with coloring.
This is the robot from the icy snowy planet in the Fifth movie and not screen accurate. Model is finished and print verified. This model is best printed at 100% scale on FDM. SLA/SLS - go as small as you'd like. I find on FDM, 120% to…
Straight from the Empire’s ranks, the Mini Stormtrooper is here—small, detailed, and ready for your desk or keychain! Designed for multi-color printing, this model features clean details and simple supports that are easy to remove. Inside…
Link to improved version A replica of an Imperial I-class Star Destroyer as seen in A New Hope and Rogue One. Print instructions Scale is at 1:1,000. Unless you want a 1.6m long print, you should probably scale it down first. I printed…
Interchangeable Corner Rounding Jig Set (R5 - R40) This modular guiding system is designed for woodworkers and makers who demand perfection in every detail. It allows you to create flawless, burr-free curved edges on panels by guiding the…
Hex nut sorter V2 Now including a fully customizable parameterized .scad! Let me know if there is a size you'd like added. No supports needed. Enjoy! What is it? A device for easily sorting all those hex nuts your kids dump all over your…
Here's a small imperial credit I modeled in fusion 360. Scale it by around 200%. Heavy trooper helmet, https://www.thingiverse.com/thing:4915358 Captain Rex helmet, https://www.thingiverse.com/thing:4914130 Be sure to post a make and…
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
Imperial Cutter model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
The Imperial II-class Star Destroyer, also known as the Imperial II-class Destroyer and colloquially the ImpStar Deuce, was a Star Destroyer model that was derived from the Imperial I-class Star Destroyer. The Anakin Solo, also known as…
A bookend with a subtle Star Wars aesthetic. The bookend has a pattern similar to what is seen on Imperial Star Destroyers. I printed a few with Galaxy Black Prusa PLA and added a neoprene base to prevent it from sliding. It works great…
This is a model of the imperial crate, These are items that were seen in the Original trilogy. Made to go with 1:12 scale action figures to enhance a collector's display. Supports may be required for optimal results. Feedback is greatly…
A set of improved tokens for Warhammer: The Horus Heresy: Legions Imperialis from Games Workshop. Included are the four order tokens (Advance, First Fire, Charge and March), a Fallback token, and six objective markers. Use these instead…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
This is a model of the imperial crate, These are items that were seen in the Original trilogy. Made to go with 1:12 scale action figures to enhance a collector's display. No supports required for this specific model. Feedback is greatly…
This upgrade kit replaces parts of my original design for the widely popular miniature vice. With the parts in the publication, you can use a quarter inch screw (¼-20) and nut if you live in a country where an M6x70 screw and M6 nut is…
Some more great Star Wars models, Chees Jace
A detailed Star Wars inspired bookmark, designed to be super thin with some topographical detail. No page damage, no hassle, just a cool design. I may do some more of these ship top-down designs - I really like them :) Test printed using…
This is a pegboard mounted spanner/wrench mount. It's made to fit one of these ( https://www.amazon.co.uk/gp/product/B003BV77T2/ You may need to copy-paste the link) sets or it's equivalents. There's both a pegboard mounted version in the…
Double U-type Pipe Clamp - Morsetto per tubi a doppia U - Metric/Imperial For fast installation of RNC, flexible & rigid conduit Easy to print, optimized filament usage Sizes available: Metric Ø 7mm Ø 16mm Ø 20mm Ø 25mm Ø 32mm Ø 8/20mm…
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
Do you have that pile of mixed up screws that needs to be organized? If so, then this is the tool for you! This print should ideally run at about 30-50mm/s with 0.1mm layer height or less because of the labels on top.
Standard key covers with round heads. Made of PLA with organic supports only on the base. Color change with M600 command or pause printing. Fundas para llaves estandar con cabeza redonda. Fabricado en PLA con soportes organicos solo en la…
It's been a while since I made a model for BFG, so here's another battleship. This is a Retribution-class battleship, however this time I designed it from scratch in Fusion 360. It is my own design but is very much influenced by the…
Some Spacers / Gauges / Setup Blocks for woodworking. These are really useful when building cabinetry and other projects. In addition to the different thicknesses, all blocks have outer 1" x 2" dimensions so can be used as gauges for…
Imperial Arquiten Light Cruiser for Star Wars Armada. Designed for resin 3D printers, for best result print the hull at 0.05mm with AA2 or 0.02mm no AA. If you like my work and want to support me you can visit my Etsy shop:…
Printed well with 0.15mm layer height. It uses M5x30 bolts and M5 nylock nuts.
Drill bit storage for the Gridfinity organization system. Allows for multiple bits in each slot except for 1/2 and 3/8. Used sharpie on the raised numbering. All three are 2 x 4 x 0.5 in “grid” units.
This is a replacement 1/4" and 3/16" shelf support pin featuring an L-shaped bracket design. Unlike standard cylindrical pegs, the flat bracket distributes the downward force of the shelf over a larger surface area, reducing stress on…
This is a complete set of radius gauges, in metric and imperial sizes: 1/32" thru 1", by 1/32" increments 1mm thru 25mm, by 0.5mm increments Each gauge has five measuring edges: 90-degree convex 180-degree convex 45-degree concave…
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
They include containers, terminals and doors (open and closed). For the design of the doors, I didn't quite stick to the templates. However, the cardboard doors, available in the game, can be used in the printed version. The terminals…
This is a model of the imperial crate, These are items that were seen in the Original trilogy. Made to go with 1:12 scale action figures to enhance a collector's display. Supports may be required for optimal results. Feedback is greatly…
I found someone that uploaded the Sword-Class frigate from Warhammer, so I once again, put it through Meshmixer, then fixed some parts using Blender. Category: Vehicles
I really wanted to make the robe for the imperial guard but it proved to be too difficult. The robe is pretty much 360° around the neck and everything I made looked like trash so I'm going with it as is. This design is meant to replace…
A simple and compact measuring aid for spaghetti cooking. It gives you roughly the weight of a chosen amount of spaghetti, if you hold them into the opening as seen in the picture. Try to form a relatively straight line on the left…
A crashed Star destroyer. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15% Filament: […
So I only have metal pegboards - some are metric (25 x 25 x 6mm) and some are imperial (25.4 x 25.4 x 6.35mm). The pegs I got from the hardware store were horrible - sometimes they didn't stay in when taking the tools out and wobbled…
Includes dice tower, built-in tray, and a storage tray for unrolled dice. Note that this was built for 19mm dice, and Imperial Assault uses 17mm dice, so it can be safely scaled down to 90% (more specifically, 89.5%) of original size in…
Print Instructions & Recommendations: Support is required for high quality results. 3MF files prepared in PrusaSlicer are also included. Model Information: Dimensions (X-Y-Z) | Standard: 35~36 x 35~41 x 60~87 mm Dimensions (X-Y-Z) | Mini:…
This is a model of the imperial crate, These are items that were seen in the Original trilogy. Made to go with 1:12 scale action figures to enhance a collector's display. Supports may be required for optimal results. Feedback is greatly…
remixed from some files here and some files from Gmod. printed and painted photo by TKmadeCustoms One version has embossed vents/stripes just encase you prefer to paint them instead of decals. Feel free to use/modify/sell prints along as…
Description A small imperial selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. Brim should be used if you have bed…
Quick remix of a metric banana for scale. Print Settings Printer Brand: Creality Printer: Ender 3v2 Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: 10-20 Filament: Inland PLA Gold Notes: Might have to play with orientation and…
Needed an imperial radius gauge and didn't see one that I liked so I designed my own. it features a hole for hanging
Experience the thrill of owning this iconic starship with this stunning 3D printable STL model that brings the galaxy to your desk. This meticulously detailed Imperial Shuttle features authentic triangular wing design, intricate hull…
This is a more compact holder for my metric and imperial sockets using he gridfinity system. 1/4x3/8 adapter Metric sizes 4 4.5 5 6 7 8 9 10 11 12 13 14 Imperial sizes 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16
This model is of an imperial star destroyer seen in star wars.
Hey Tac this is all I could scrape up ; ) Do check the sizing suits your needs ; ) Cheers Jace PS the neck area may need to be dremeled to fit : )
Link to improved version A replica of the imperial arquitens-class cruiser as seen in Star Wars Rebels. The model is at 1:10,000 scale. The photos show a larger print at 1:2,000 and a smaller one at 1:10,000. Print instructions I would…
This set includes two storage trays specifically designed for Wera Hex Plus L-keys, accommodating both Metric and Imperial sizes. These trays help keep your tools organized and easily accessible. Features: Custom Fit : Each slot is…
This is based on https://www.thingiverse.com/thing:1686322 with some changes like: - Add imperial and UNC functions for nuts and bolts - Delete all unused function, not needed for nuts and bolts - Add size as text (M:mm, i:inch, U:UNC) -…
Finally, one of my biggest projects is done! With great pride I bring you the Spiritbreaker, a Leman Russ proxy! Fitted with the same weaponry, and similar details, it's an adequate stand in for the Imperium's mighty battle tank, or it…
Una scultura elegante e originale che raffigura un gatto in stile imperiale, con corona di foglie, drappeggio classico e piedistallo decorativo. Un modello che unisce la regalità delle statue classiche al fascino felino, perfetto per…
This model can be found on my instagram @jbneto3d without the JBNeto emboss.
Imperial Clipper model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
Description This is a Gridfinity Bin used to organize all of your loose hex Allen key wrenches. Each slot can hold several keys of each size. It also has a built in gauge so you can easily identify the size of the wrench before you put it…
Update Dec. 24, 2022 : I added a new set of templates with recessed text labels. These new templates allow for a flush top so that a router can be used on top of the templates. The new templates fit the old holder. The new templates have…
This is an Imperial Insignia Coaster that is stackable. I also have a Rebel one https://www.prusaprinters.org/prints/8804-rebel-insignia-star-wars-coaster-stackable Print instructions If you print the GCode F1 is Black and F2 is White.
A wall-mountable SAE/imperial drill bit holder/organizer designed for 45-degree french cleat systems. Made for french cleats that are at least ½" deep Print standing upright with supports for the cleat overhang, or on its side with no…
Remix of the "Screw measuring tool, imperial" by cdlong. It's the Imperial Screw Measure Tool, but Shorter. We didn't need all of the diameters, so I knocked those off, made it shorter so it looks nicer, then added some magnet slots for…
These are some star wars themed coasters I designed. I printed them with a 0.2 mm layer height with ironing enabled in black PLA and finished with acrylic paint and a matte clear coat. These fit a 4" stick on cork backing that I found…
A set of 10 coasters with a support rack, with the imperial crest from starwars. You might need supports for the rack (for the lettering on the front and the imperial crests on both sides). For the coasters I used 30% infill with…
2026-04-25 UPDATE: I redesigned these so that they fit together in a nested arrangement on a pegboard hook. This makes the sets more compact and orderly, and fit on a shorter hook, or allow both sets to fit on the same short hook. See…
Imperial Courier model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
⚫ Imperial Dalek 1988 ⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a model of the Imperial Credit, a…
Gridfinity storage for Irwin Imperial Forstner bits. 1 3/8", 1", 7/8", ¾", 5/8", ½", 3/8", ¼" holders Included 3mf file for your editing pleasure Printed using PLA Tolerances are fairly tight - if you are using filament that shrinks take…
This is a set of blocks that can be used to recreate the Pirates themed Imperial Soldier and Imperial Soldier - Officer figures at 500% scale. These were included in the Sabre Island set originally published in 1989. We've included stl…
This is a set of models for an adjustable depth gauge intended as a woodshop aide for setting a Table Saw's blade height, a Router's bit height or a Drill Press's plunge depth. That's what I use it for but I'm sure there are other…
Custom Mortar for your Star Wars Black 6" Stormtrooper
These are my offering for upgrading the classic Revell 1:2700 scale Star Destroyer. I've used some artistic license in places - adding in detail where there wasn't too much on offer. These were done for a Resin printer - mine is Anycubic…
![The Engineer's Spaghetti Caliper / Measure [metric/imperial]](https://media.printables.com/media/prints/922062/images/7035435_c92965e9-64c7-47b9-af03-f00687efb7a1_c1236932-4496-494f-b0b6-4d2e5e8a3df3/caliper.jpg)
![Doctor Who - Imperial Dalek [1988]](https://media.printables.com/media/prints/91571/images/7871487_3222b998-93ee-4a4f-a810-50b3e5d2f2cd_18dda337-2035-4968-b9b4-9c14df6878b8/gg2.png)
