Wyniki wyszukiwania: infrared

Sortowanie

109 modeli

P
PrintablesBravehartk2

Raspberry Pi Night Vision Camera Mount (incl. Infrared spots)

Camera Mount I build this mount to attach this Raspberry Pi Infrared Night Vision Camera with infrared spots to a flat surface (an existing pi case in my case). The pi camera should have been adjustable (direction / angle). I used some…

Pobrania
998
Polubienia
86
Ocena
4,5
P
Printablesrace85com

HSW IR Pyrometer / Infrared Thermometer holder for Honeycomb Storage Wall

angled mount will fit small and bigger thermometers, with openings from 12mm up use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4…

Pobrania
604
Polubienia
118
Ocena
5
P
Printablespastaoceanfrog

Infrared Thermometer Holder Skadis

Small holder for Infrared Thermometer for the Ikea Skadis board. Fits Thermometers with Ø15mm opening. Print with solid infill. The thermometer applies some force on the holder, so I printed with PETG. It works good. The design is focused…

Pobrania
463
Polubienia
69
Ocena
4,9
P
Printablesmaschmann

TRCT5000 IR Infrared Sensor Case

Case for TRCT5000 infrared sensors with positioning help. Fits easily and needs no screws. If you want to see the status LEDs, just print the top part with transparent or white filament. Print Settings Printer Brand: Creality Printer:…

Pobrania
360
Polubienia
7
Ocena
0
P
Printablesbgnfu7re

Infrared thermometer holder for Skadis

Small holder for Infrared Thermometer for the Ikea Skadis board. Fits Thermometers with Ø15mm opening. Has a bit tilted nose 15° for a more secure hold. Uses universal hook to mount.

Pobrania
317
Polubienia
36
Ocena
4,89
P
PrintablesSebastian

Case for ESP8285 ESP-01M IR Infrared Transmitter Module

Made a case for my ESP8285 ESP-01M IR Infrared Transmitter Module that I use as remote for my TV with Home Assistant I used ESPHome remote transmitter https://esphome.io/components/remote_transmitter.html with the IR remote codes from…

Pobrania
219
Polubienia
13
Ocena
5
P
PrintablesCody Tolene

Flipper Zero - Infrared (IR) Blaster Case

This is a suit of armor befitting the esteemed Flipper Zero IR Blaster, forged by the renowned Rabbit-Labs. Armed with seven luminous hyperintensity LED emitters, this apparatus harnesses the power of infrared transmissions to command the…

Pobrania
210
Polubienia
31
Ocena
0
P
PrintablesWillemde20

InfraRed Thermometer holder 18mm for Honeycomb storage wall

Simple mount to keep the Thermometer secure and in one place

Pobrania
207
Polubienia
31
Ocena
4,8
P
PrintablesAliz

Infrared thermometer holder for Honeycomb Wall

holder for Infrared Thermometer for the Honeycombstoragewall.

Pobrania
192
Polubienia
29
Ocena
5
P
Printablesmarcel293

Etekcity infrared thermometer wall mount

I remixed the wall mount, because I wanted to have two screw holes with a bevel, no text and round corners. Thanks to LICK_THE_BUTTER for the inital work. No supports needed!

Pobrania
163
Polubienia
10
Ocena
5
P
PrintablesSupercoolbuilds

Infrared thermometer holder for Ikea Skadis pegboard and Kuepper (Küpper) EU pegboard

Remix for small holder for Infrared Thermometer for the Ikea Skadis board and Küpper EU board to fit thermometers with Ø17mm opening. Print with 100% infill.

Pobrania
162
Polubienia
22
Ocena
4
P
Printablesippe

Biltema Pegboard Infrared Thermometer Holder

Simple pegboard holder for infrared thermometer. Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world with same diameters.

Pobrania
147
Polubienia
22
Ocena
5
P
PrintablesZef

Infrared Thermometer Gun Pegboard Mount

This is a pegboard mount for my infrared temperature gun. I wanted a pegboard mount that didn't take up too much space and that looked nice, which seemed tricky for the temperature gun design, so I came up with this and am quite pleased…

Pobrania
142
Polubienia
28
Ocena
4,67
P
PrintablesINUX3D

MANTIS RPI Infrared Camera Case (wall mountable)

The Mantis case features an open frame housing for better cooling of the LEDs. Its swivel base will help you position it on a Pi case, wall or other surface where you can either apply doublesided tape or screws. For assembly material…

Pobrania
113
Polubienia
16
Ocena
5
P
Printablesrakoenig

Multiboard Holder for Infrared Thermometer

A simple holder for Multiboard. Uses the big snap, so no additional snaps needed. Print with 0.2 mm layer height and supports.

Pobrania
99
Polubienia
13
Ocena
0
P
PrintablesScale_RC_German

14mm Honeycomb storage wall (HSW) InfraRed Thermometer

I adjusted it to fit a 14mm thermometer. And also made a hole in the middle to save filament

Pobrania
98
Polubienia
11
Ocena
0
P
Printablesyipottery

AMES INSTRUMENTS (Harbor Freight) 12:1 Infrared Laser Thermometer Wall/Pegboard Holder

UPDATE: Added a pegboard version of this mount using Sy's Peglock System design. I picked up an AMES Instruments 12:1 infrared temperature gun from Harbor Freight (the $22 model) and couldn't find a stand or holster for it so I designed…

Pobrania
88
Polubienia
24
Ocena
5
P
PrintablesScio

Housing For KY-022 Infrared IR Receiver Module

Simple housing for a KY-022 Infrared Receiver Module The hole for the actual receiver is 9x9mm This was modeled off a module measuring 15.4 x 24.18 x 15.69mm. (This includes the pins and receiver) Print Settings Printer Brand: Creality…

Pobrania
87
Polubienia
0
Ocena
0
P
Printableslanzima

Ikea Skadis Peg Board holder for Mestek Infrared Thermometer

Slight adjustments for the Mestek Thermometer.

Pobrania
87
Polubienia
7
Ocena
0
P
Printablesschiko

Bosch UniversalTemp Holder for Skadis (Infrared Thermometer)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Support needed! I used 4 walls for stability. PLA worked…

Pobrania
85
Polubienia
9
Ocena
0
P
Printableskitlaan

InfraRed Thermometer Holder 20mm for Honeycomb Storage Wall

Remix to support 20mm IR Thermometer openings.

Pobrania
84
Polubienia
14
Ocena
5
P
PrintablesCody Tolene

Flipper Zero - Infrared (IR) Blaster Case Pin Boot Cover

This pin boot cover is made to fit my Flipper Zero Infrared (IR) Blaster case found at the following locations: https://www.printables.com/model/606855 https://www.thingiverse.com/thing:6106025…

Pobrania
83
Polubienia
10
Ocena
0
P
Printablesjkalf

Gridfinity Wintact Infrared Thermometer bin

A 4x3x7 gridfinity bin which has a carve out for a Wintact Infrared Thermometer from Amazon ( https://amzn.eu/d/fVUWYlg ). The model is multi-color printable. I actually ment the ‘red’ to be red, but due to a lack of red filament I chose…

Pobrania
83
Polubienia
13
Ocena
5
P
PrintablesNewbie Yep

Gikfun Obstacle avoidance IR infrared snesors mount

small mount for sensor Category: 3D Printing

Pobrania
74
Polubienia
3
Ocena
0
P
PrintablesMcClean

Atomstack R30 infrared laser module

Atomstack R30 infrared laser module model

Pobrania
64
Polubienia
1
Ocena
0
P
PrintablesRaVeN

Infiray (Xinfrared) XH09 (X2)

Accuracy of reproduction +-0,2mm except overall dimensions, which are accurate to the specs. Please note that this camera has manual focus lens with screw ring - 1mm adjustment during use (from 23.8mm to 22.8mm overall length). If you…

Pobrania
64
Polubienia
1
Ocena
0
P
PrintablesZach Weber

Gridfinity infrared temp sensor

I wanted to store an etekcity infrared thermometer, but i don't cad so well. I made a rectangular hole and plopped the thermometer in it. (its model is lasergrip 774).

Pobrania
61
Polubienia
17
Ocena
0
P
PrintablesJames Gilliland

Ryobi 14mm Infrared Thermometer Holder for Honeycomb Storage Wall

A 14mm infrared thermometer holder for my Ryobi Thermometer. Designed from scratch to match the Honeycomb Designed and be easy to print but heavily inspired by…

Pobrania
61
Polubienia
10
Ocena
0
P
PrintablesTomKnox

Infrared Reflective Sensor Module

Infrared sensor is most commonly used for object detection and avoidance. The effective range of the sensor is 2 - 30 cm, trimmer (potentiometer) is used to calibrate the sensor for desired range. Operating Voltage 3 - 5 V DC. It can…

Pobrania
59
Polubienia
8
Ocena
0
P
PrintablesKris M

Slim Variant - Infrared Thermometer Mount for IKEA SKADIS

Quick remix of https://www.thingiverse.com/thing:3298390 No supports are needed for pegboard hooks with this design. To achieve this I've simply performed Z height cut. By doing so overall z height has been reduced. Pros - no supports,…

Pobrania
58
Polubienia
7
Ocena
0
P
PrintablesSeth Brasile

Wemos D1 Mini + Infrared Sensor Enclosure

This design was created to accompany my video series on using Magiquest magic wands to control smart home automations, but this case could be used in any application where you need to add an infrared sensor to a D1 mini or D1 mini clone.…

Pobrania
57
Polubienia
7
Ocena
0
P
PrintablesSolsken106

Box for ESP8266 HomeKit infrared remote

Case for HomeKit project for IR remote old devices (television that doesn't support HDMI-CEC, a speaker set that is connected to it or just anything that may be controlled via infrared remote even an A/C) describe on gitlab link .…

Pobrania
55
Polubienia
15
Ocena
0
P
Printablessango

Holder for infrared thermometer (GM320)

Print it standing up, supporless. mount with stickytape at an angle. The thermometer should be laid in a bit.

Pobrania
54
Polubienia
8
Ocena
0
P
Printablescpayne3d

xTool 2W Infrared Laser Module Storage Box

I designed this printable storage box specifically to store the xTool Infrared Laser Module from my D1 Pro laser engraver. I used the foam from the xTool original shipping box to line the inner walls of my printed box. This was designed…

Pobrania
54
Polubienia
14
Ocena
5
P
Printablesjuh

fischertechnik TCRT5000 infrared reflective sensor

A compact infrared reflective sensor for fischertechnik, based on the TCRT5000 reflective optical sensor with transistor output . I needed them for a line-following robot. Use an analog input pin to measure the signal (sensor out pin).…

Pobrania
51
Polubienia
4
Ocena
0
P
Printablesrtcam

InfiRay Xinfrared T2 Pro Bracket

This is a bracket to attach an InfiRay Xinfrared T2 Pro thermal camera to a pan-tilt light. The purpose is to create a thermal camera turret that can be used on vehicles for spotting wildlife at night. This is meant to be used with 3mm…

Pobrania
51
Polubienia
5
Ocena
0
P
PrintablesLikkleidiot

Enclosure for Raspberry Pi Zero and Infrared Camera

This document describes the design and functionality of a bespoke enclosure crafted to house a Raspberry Pi Zero and a Waveshare infrared camera. This enclosure is specifically engineered for attachment via zip ties to a dog's crate,…

Pobrania
51
Polubienia
6
Ocena
0

2WD Chassis Infrared Sensor Holder/Mount with M3 holes for Arduino

A mount to fit onto the 'standard' 2WD Chassis Kit seen on Amazon, AliExpress, etc. to be able to mount 2 - 4 Infrared FC 51 sensors. Uses M3 screws to mount to the chassis and the infrared modules Category: Robotics

Pobrania
49
Polubienia
4
Ocena
0
P
Printablesmadeby_aaron

DJI Robomaster S1/EP Infrared Distance Sensor Bracket

DJI Robomaster allows you to add the Infrared Distance Sensor on EP but in a terrible position right under the gripper. I tried to tape it with double-sided tape in the front of the hit detector but for better accuracy, the sensor needs…

Pobrania
47
Polubienia
3
Ocena
0
P
PrintablesMarcello

IKEA Skadis Holder for Infrared Thermometer

This is a custom IKEA Skadis holder I designed for my no-name infrared thermometer, since none of the existing ones on Printables fit properly. The mount holds the thermometer securely while keeping it easy to grab when needed. The design…

Pobrania
47
Polubienia
5
Ocena
5
P
Printablescfresh

Pegboard Infrared Thermometer Holder

Remixed Nicorn's design with standard pegboard spacing (25mm). Pegboard part by my bestest buddy Angus! Category: 3D Printer Accessories

Pobrania
47
Polubienia
1
Ocena
0
P
PrintablesSimonEngel

Smartmeter infrared read/write sensor cas

Smartmeter infrared read/write sensor case for various smart energy meters used in germany. Parts list: Threaded inserts and M3 screws (2pcs) 5mm Neodymium Magnets (6pcs)

Pobrania
47
Polubienia
3
Ocena
0

Multiboard Mount for Parkside Infrared Thermometer

Multiboard Mount for Parkside Infrared Thermometer A compact and practical wall holder designed for the Parkside non-contact infrared thermometer. It’s made to fit perfectly on Multiboard systems and keeps your tool always ready for use.…

Pobrania
45
Polubienia
1
Ocena
5
P

Infrared Thermometer (aka Laser Temp Gun)

This is a "case" for a battery-powered infrared thermometer with a laser pointer built with a Wemos D1 Mini ESP8266 microcontroller and an MLX90614 sensor. By its data sheet this sensor has high accuracy of 0.5°C over the 0 … +50°C…

Pobrania
45
Polubienia
10
Ocena
0
P
Printableseloekset

Biltema InfraRed Thermometer bracket for Multiboard

Minimal bracket to hold a InfraRed Thermometer from Biltema. Slide it in backside first and rotate it into the position shown in the picture. Mounting 1 M3 Nut 1 M3 Screw 1 Drop-In Nut Weight Bearing Snap M3 (see Drop-In Nut - Weight…

Pobrania
44
Polubienia
7
Ocena
0
P
Printableswinchcable22

Non-Contact Infrared Thermometer Mount

Wall mount for Infrared Temp Gun. Holds 2 AAA batterys so not to corroded in gun. works on: menards 84850 Benetech GM321 XRCLIF 520E harbor freight general IRT207

Pobrania
43
Polubienia
8
Ocena
0
P
PrintablesJonah Russell

Case for Ames Infrared Thermometer from Harbor Freight

I wanted to protect the device from all the other stuff in my toolbox so I made this. It has an optional lid and spots to store two 9 volt replacement batteries from the device. I made mine out of ABS but I'm sure other materials will…

Pobrania
43
Polubienia
11
Ocena
0
P
PrintablesShowPaw

Iotmug Double Barreled Dazzler Infrared Case for Flipper Zero

Use hotglue to stick and stabilized the ir module

Pobrania
43
Polubienia
4
Ocena
0
P
PrintablesRaptor King

iHealth Infrared Thermometer Cradle

Cradle for the iHealth digital thermometer. Probably fits many other brands. They all seem to have a common shape. We have to use ours daily for daycare. Makes it a little cleaner since we keep it on the countertop.

Pobrania
42
Polubienia
4
Ocena
5
P
PrintablesAsus1357

Pegboard Infrared holder

Pegboard Infrared holder for Mastercraft model Maximum 201610. This is for the north American 1" spaced pegboard. Print upside down with supports from table. Nozzle .4 Resolution .2 Hot end 210 Bed 60 Supports yes (from bed)

Pobrania
41
Polubienia
6
Ocena
5
P
PrintablesToFe

MoleBox: Infrared Thermometer MLX90614

oleBox system - 3D printed boxes compatible with BITBEAM construction kit (therefore even with LEGO Technics/Mindstorms). The main purpose of MoleBox is covering a particular sensor or the entire module and simultaneously allowing…

Pobrania
41
Polubienia
6
Ocena
0
P
Printablesbevoholic

Infrared Thermometer Pegboard Mount

Couldn't find a pegboard holder for my infrared thermometer so I made one in Tinkercad. Fits a standard pegboard 25mm. Printed with supports everywhere for the pegs. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…

Pobrania
40
Polubienia
2
Ocena
0
P
PrintablesAlvomane

Chestnut Infrared-/Laserscan | Kastanien-Scan mit Creality Sermoon S1

EN: This is a Creality Sermoon S1 scan of a chestnut. The scan was created with a resolution of 0.2 mm and blue cross, parallel and single lasers. I also did an infrared scan. — I would be very happy if you have as much fun with the…

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesCharly BEGOOD

Infrared Thermometer holder

Wall mounting of my infrared thermometer holder

Pobrania
37
Polubienia
8
Ocena
0
P
PrintablesPetr Dobry

Infrared thermometer holder for LOMVUM

Simple Holder for LOMVUM infrared thermometer. Could be mounted by double side tape or two M3 screws. Print Settings Printer: Haribo Rafts: No Supports: No Infill: 20% Category: Tool Holders & Boxes

Pobrania
33
Polubienia
1
Ocena
0
P
Printableslysithea81

ExJ Infrared Camera

This is the Open Source version of the E-by-J Infrared Camera. This is a complex DIY project that requires exact electronic components, wiring, and setup commands. Note that throughout much of 2020, the increased demand for thermal…

Pobrania
33
Polubienia
11
Ocena
1
P
Printablesahmet

Smart Infrared Thermometer - DRAFT/WORK-IN-PROGRESS

It is a non-contact thermometer that works with Arduino Nano and GY906 sensor and can measure and record temperatures. The model is completely in draft condition, with serious shortcomings. I have archived it for future reference. This…

Pobrania
33
Polubienia
2
Ocena
0
P
Printablesjimerb

Infrared Thermometer Magnetic Holder

INFRARED THERMOMETER - MAGNETIC HOLDER Keep your thermometer in the most handy place! Features Place on Refrigerator and use it for cooking. Stick it to your tool chest! Stick it to your auto (careful) Easy to assemble Easy to print - No…

Pobrania
33
Polubienia
5
Ocena
0

8020 mount HC-SR501 Infrared Distance Sensor w-cable tie start v2

A mount for an HC-SR501 sensor with cable ties. The mount may be used stand alone or mounted to an 8020 series 10 extrusion. Print instructions Unassociated tags: infrared sensor mount Category: Electronics

Pobrania
33
Polubienia
3
Ocena
0
P
PrintablesJose Miranda

Gamepad case for Radio Shack's Make: it Robotics Infrared Controller

This is a gamepad case for my Radio Shack Make: it Robotics infrared remote controller (Amazon) (Radio Shack #2770168) The buttons are labeled to be used for an Arduino rover with an ultrasonic sensor and three servos. So it moves the…

Pobrania
32
Polubienia
0
Ocena
0
P
Printableskmedia

InfraRed Thermometer holder 16mm to 18mm for Honeycomb storage wall

Remix to support 16mm to 18mm IR Thermometer openings. I make it in two parts. The first is printed in PLA and the second in TPU I glue them together…

Pobrania
32
Polubienia
8
Ocena
0
P
PrintablesPetr
Pobrania
32
Polubienia
22
Ocena
0
P
Printablesthemomonga

Skadis Infrared Thermometer Holder

My take on a Skadis infrared thermometer holder

Pobrania
31
Polubienia
3
Ocena
0
P
Printablesdohnni

Dust Cover for Parkside Infrared Thermometer

Self retaining dust cover for Parkside PTI 380 C2 Infrared Themometer. Your printer should be well calibrated in order for the dimensions to fit correctly.

Pobrania
29
Polubienia
7
Ocena
0
P
Printableswedgeworks

Box for ESP8285 ESP-01M IR Infrared Transceiver Sensor WiFi Remote and Micro USB

I needed a project box for my combo IR Transceiver and Micro USB board. A few hours and a lot of test prints later and here it is! Hope you like it. Nice and compact. Printed in Polymaker PolyLite Clear PETG so I wouldn't need any…

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesDenis Vasilescu

Infrared Pi camera face plate for enclosed Ender 5 S1

I have a completely enclosed Ender 5 S1 (Creality official enclosure parts) running Klipper off a Pi 3. It is dark in there for a camera, and there are few useful mounting points to see the first layer without interfering with moving bits…

Pobrania
26
Polubienia
2
Ocena
0
P
Printableschixxi

USB IR / Infrared Toy v2 - Case

I didn't like any of the cases available for the IR Toy v2 which I was able to find on Thingyverse, so I went ahead and created my own case. The advantages of this compared to others is that it is not oversized, allows good IR reception,…

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesNick vd Molen

Skadis Infrared Thermometer Holder

Skadis board Mestek Infrared Thermometer holder, the original file had a smaller shaft, which caused my thermometer to fall down from the board. if you do want to support me feel free to donate a cup of coffee

Pobrania
24
Polubienia
1
Ocena
0
P
Printablesaespz

ESP8266 infrared module case

A minimalist case for this esp8266 infrared module you can find floating about on Aliexpress. No screws/glue required, it's just snap fit. I recommend transparent PETG for the greatest aesthetic (but PLA works too). I use it with…

Pobrania
24
Polubienia
5
Ocena
0
P
Printablest0b1

Infrared LED connector for Voltcraft multimeter

This thing holds a 5 mm LED to the optical transmitter of our Voltcraft VC850 digital multimeter. It should be compatible with VC820, VC830, VC840, VC850, VC870, VC920, VC940, VC960. It might even work for the corresponding UNI-T DMMs. I…

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesBITaMinD R+D

Customizable Infrared Beam Sensor angled support

Angled support for a garage door infrared barrier ( ABO-20L ) Category: Other

Pobrania
24
Polubienia
1
Ocena
0
P
Printables740 Dave

Adjustable Infrared Temp Sensor Holder for Skadis

The original design was superior to most other models as it takes up less space on the Skadis board and has the handle out for easy grabbing. However, it was for one specific brand/model of thermometer gun and didn't work with mine, a…

Pobrania
23
Polubienia
8
Ocena
0
P
PrintablesGustavo

Remote Control holder for infrared heater

The remote control box for the infrared heater, made in such a way that it can be stuck on the wall under the heater and can be operated by pressing the buttons directly on the wall. Fits exactly on the remote control for the Cattara…

Pobrania
21
Polubienia
0
Ocena
0
P
Printablesa123qwertz567

Simple compacted hinged infrared camera holder

I required a small compact holder for my cheap infrared camera. to mount it between my print head and enclosure back wall. This gives a decent view for the required space. NOTE: Check the provided drawing if your camera has the right hole…

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesAwei

NEJE 30W laser Infrared alignment frame

Other materials such as pictures

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesCederb

Holder for infrared remote on IKEA Hol table.

Pic 3 is of the remote in question, mine is for an Infrared Patio Heater, but there are probably loads of other products that use the same infrared remote. It fits either of the IKEA Hol tables. You need a little bit of support to print…

Pobrania
18
Polubienia
1
Ocena
0

Infrared Radiant Panel Foot Bracket (Large Model)

Heavy-Duty Foot Bracket for Vertical Radiant Panels (Large Model) Tired of flimsy, unstable feet for your infrared panel heater? This is a completely re-engineered, heavy-duty foot bracket designed for maximum stability, transforming your…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesLocus Prints

3D Printed Hungry Hound that Can be fitted with DC Motor and Infrared sensor.

This is a 3D printable toy, the front wheels actuates the head and the back shaft can be configured to actuate the tail. it is possible to attach 4 N20 geared DC motors to the unit or two plane shafts can be used for the wheels. In my…

Pobrania
17
Polubienia
9
Ocena
0
P
PrintablesMatej

USB optical Infrared IR head adapter for energy meters OR-WE-516, OR-WE-517

Adapter for mounting USB optical head for energy meters OR-WE-516, OR-WE-517 -Operates in IEC 62056-21 (IEC1107). Compatible with CP2102 Micro USB to Near Infrared IR Optical Magnetic Adapter Converter Cable for Electricity Meter Gas…

Pobrania
16
Polubienia
1
Ocena
0
P
Printablesschiko

HSW Bosch UniversalTemp Holder (Infrared Thermometer)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Best printed as oriented in the STL file. Support needed!

Pobrania
15
Polubienia
3
Ocena
0
P
Printableslromandine

Infrared IR Illuminator Shelf Clamp

A shelf clamp for IR illuminators so you can mount to the end of a shelf and not a wall or ceiling. It is purely friction fit, no screws or anything necessary. IR illuminators will enable you to play VR with inside out tracking (Pimax…

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesSamuel

Infrared/Thermal Camera AMG8833

Case for a Thermal camera module. I designed it to be battery operated with an integrated type-c charger. Front and back panel (Sensorside.svg and Displayside.svg) are laser cut out of 3 mm acrylic. The red part of the svg image is…

Pobrania
15
Polubienia
5
Ocena
0
P
PrintablesFlueRian

Simple Efficient Infrared Thermomenter Pegboard Mount

Works well and does not use up a lot of space due to the angle.

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesOfficer_Baitlyn

Braun ThermoScan 3 ear infrared thermometer holder

A holder for the braun thermoscan 3 ear thermometer. two versions: the first one uses a standard 5mm hole found in most kitchen cabinets plus a single screw. the alternative “no peg” version just uses a single screw to screw into whatever…

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesDBert

Arduino infrared motion detector holder

This case‘s purposes are: Protect the sensor decrease the range “cone” of the infrared light easily mount it with a cable tie there are two different diameters (9mm and 12mm) so that you can decrease the radius as you need. My Infrared…

Pobrania
12
Polubienia
3
Ocena
0
P
PrintablesStoo

Infrared LED Mount for Prusa I3 MK2S

This is a mount for the little IR Illuminator modules you can buy from amazon /ebay/china etc. It's designed to clamp onto the frame of the Prusa I3 Mk2S, It may or may not fit other printers - feel free to remix it so it does! I've cut a…

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesJovial Jaguar

Infrared Transmitter Case (Exile Branded)

Model was printed with a 0.4mm nozzle using PLA. The file contains both top and bottom case parts. Notable print settings: 0.2mm layer height 2 wall loops 4 top and bottom layers Filament Consumption This model uses ~ 5g of filament,…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesInaki Iturriaga

Infrared Launch Controller

In this project tutorial, we will guide you through the process of building an infrared launch controller, allowing you to remotely launch rockets, drones, or other devices using infrared technology. This project is perfect for hobbyists…

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesJesse

Infrared repeater case

A case for an infrared receiver. The devices re-transmits any IR remote signal over the internet using Wifi, TCP/IP, and HTTP. Modules used: ESP8266 and IR Receiver/Transmitter pair Micro-controller:…

Pobrania
8
Polubienia
0
Ocena
0
P
Printablesgnatcage

Dock Stand Cradle for Klein Tools IR1 Infrared Thermometer

A dock/stand/cradle for the Klein Tools IR1 infrared thermometer. I printed mine with a brim, no supports, 15% gyroid infill, 3 perimeters, 4 vertical shells (top and bottom).

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesAdam Weiss

Infrared pi camera arm

I think it was originally from Pi cam Top mount by Bpercival - Thingiverse but it's been a while and I just wanted to get it uploaded for my own reprinting.

Pobrania
8
Polubienia
0
Ocena
0
P
Printableshoeni

Corner mount for ELP infrared web cam V2 (eg. on Lack enclosure)

A corner mount for the ELP infrared USB web cam . Perfectly suited for getting mounted inside of an Ikea Lack enclosure to monitor print success with an Octopi. No screws or glue required (aside for fixing the mount to the Lack leg). The…

Pobrania
8
Polubienia
0
Ocena
0

Pegboard Holder for Homedics Infrared Thermometer -6g

This is a holder for a regular 1 in pegboard, made to fit my thermometer. I printed it in PLA and added a design on the front, but the design didn't turn out well so I removed it from the STL. I did use supports for the top pegs, but I…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesSnowHead

Protective Cap for Infrared-Thermometer FLASH PEN 31.1125

This cap protects the sensor of the Dostmann "Infrared-Thermometer FLASH PEN 31.1125" from dust, fuzz and dirt especially if carrying it in the pants pocket. Print Settings Printer: FIashForge Dreamer Rafts: No Supports: No Resolution:…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesJanK

Beurer infrared lamp support

We use a Beurer infrared lamp. However, the original stand is defective in that if only allows the lamp to tilt up, not down. So I designed a replacement stand that allows tilting up and down. Print Settings Printer Brand: Prusa Printer:…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesMartyMcFly

Mouting Angle for Reer-Infrared-Lamp

I was afraid, that my baby gets too cold, since the maximum angle of our reer lamp is to high, so i added additional 15 ° of angle so my baby doesnt get cold feed during a diaper change :)

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesDoodetz

IR (infrared) retransmitter / tranciever hub for homeassistant

A usb powered infrared hub for receiving and transmitting IR codes from homeassistant to make your dumb IR devices controllable from your smart home or to use an IR remote for controlling your smart home devices. Top of the case has space…

Pobrania
6
Polubienia
2
Ocena
0
P
Printablesdeath4u

Infrared Thermometer ikea screwless stacker

Combined a Infrared Thermometer holder with a screwless stacker for ikea lack tables Print Settings Supports: No Infill: 10% Notes: The part can be mirrored to fit on the opposite side. Category: 3D Printer Accessories

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesLordValium

Simple Remote Holder for Infrared heating panels (Heidenfeld HP500)

Its just a simple holder for the Remote of (Heidenfeld HP500) and a few other heating panels that use the same remote.

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesRayken Wong

NutriChef Infrared Convection Cooker (PKAIRFR48) Replacement Handle

Replacement handle for NutriChef Infrared Convection Cooker (PKAIRFR48). This fit perfectly when printed with Polymaker ASA Polylite. As such, if you print with other filaments, please take into account that ASA shrinks a bit. Honestly,…

Pobrania
5
Polubienia
0
Ocena
0