549 modeli
Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…
Wydruk około 3,03 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple Intel CPU holder for people like me who just want to have a processor standing on their desk. You can put the CPU from both sides inside, so that you can either see the heatspreader or the pins connecting to the socket. I…
Wydruk około 3,02 €–3,69 € nettoWstępna wycena jednego wariantu
I designed a under Desk Mount for my Intel NUC 10 (NUC10i5FNK). It is for the Version without HDD (only PCIe NVMe Drive), the HDD Version is higher... The NUC has 4 Rubberfeets on the Bottom. And there 4 matching Holes in the Holder, that…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…
Wydruk około 3,10 €–3,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Making your own eurorack case? Then you might want a 1U row! Modeled this bracket based on the Intellijel 3U Z-Rail brackets so it's sized to work with M4 screws. Holes are countersunk as well for a nice flush mount. Attach the bracket to…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
A variation or original minimal design.
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
Introducing the 3D-Printable Rackmount Bracket for Intel NUC 7 Computers (2U): Improve the organization of your workspace with our practical 3D-printable rackmount bracket designed for Intel NUC 7 computers. This bracket is tailored for a…
Little Green Army Men : intelligence /chief of staff : Kyrylo Budanov Holding a full deck of cards and a cup of green tea.
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Many forum posts about issues, where the AD3212KB-K71 fans on actively cooled Intel X540 cards are loud and/or unreliable. For my X540 cards, I designed this adapter to swap out the loud little fans with quieter 50mm fans. The bracket is…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I could not find a battery cover, so I created one myself. I don’t want unprotected batteries in my bag! So here it is: the DJI Flip Intelligent Battery cover. Fits nicely into place, locked using the battery-locks. As a bonus you can use…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have an Intel NUC (NUC7i7BNH to be exact) that I use for OctoPrint and F360. I created this so that I could mount my NUC to my enclosure but also be able to remove it easily. It has a pull-down tab at the bottom to allow you to slide…
Intel NUC Cover Plate MMU by Keks95 on Thingiverse: https://www.thingiverse.com/thing:6595145
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
An adapter for NITECORE Intellicharger i4 to fits AAA batteries comfortably and stable during charging. Made in Autodesk Fusion 360.
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We all have this co-worker who just doesn't want to get it.
Wydruk około 4,52 €–5,53 € nettoWstępna wycena jednego wariantu
Modeled in two parts, which slide over top of one another and lock into place to hold the processor securely within. This particular tray (I am making a series of these for the older processors in my collection) is for Intel Socket…
The AT2 10Gbit Network Card gets very hot under load - I messured over 60°C. So I designed a heat shroud which uses a 60mm Fan to direct the air over the cooler.
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intel Nuc VGA Port Blankplate Bracket by Keks95 on Thingiverse: https://www.thingiverse.com/thing:6594029
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
looks good with a color change best black and white in my opinion.
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
You can never have enough synths, so I made this mount for my Korg Monotron Delay which attaches to the handle on my Intellijel case. No supports needed. Go ahead and edit it and attach your own gear!
Wydruk około 4,85 €–5,93 € nettoWstępna wycena jednego wariantu
While printing Ice Cream Man ’s IntelliChlor Wrench , one of the two outer detents was accidentally omitted. After printing a second copy in the original configuration, I discovered that the version with only one outer detent was actually…
Wydruk około 5,20 €–6,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
Update: May 5th 2024 The model has been revised to improve the hinge. This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). Print instructions Rafts: No Supports: No Layer Height: 0.2mm…
Just a CPU protection tray for Intel LGA1151 CPU's Good for storage or shipping! PLEASE NOTE RECOMMENDED LAYER HEIGHT Updated: 6/29/2024 Added version for 7th and 8th Gen Print Settings Layer height: 0.15mm - 0.20mm Support: None
This is a simple print-in-place protective case for Intel 12th-14th Gen CPUs (LGA 1700). Print instructions Rafts: No Supports: No Layer Height: 0.2mm or 0.3mm Infill: 15-20% 3 perimeters 3 tops 3 bottoms Filament: Anything should be fine!
This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). I've remixed the original model so that you can see the CPU model, with a small window at the top.
Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…
I made a video: https://www.youtube.com/watch?v=yB3NdeAyUU8 This piece adapts a standard VESA mount to the 85mm M3 holes on the bottom of an Intel NUC computer. Print instructions I printed with 0.4 nozzle at 0.8 extrusion width and 0.25…
Remixed an older design from Discobanan since the original had a lot of friction for me. Safely store your precious Xeons (and Desktop CPUs)! Best printed as the STLs are already orientated.
Hey guys i'd like to share my recent bigger project with you, my 10 inch Network Rack. I was always disappointed when i saw all the mess and not really organized cabling and setup of my network devices at home. Inspired by another 10inch…
Update: Added 120mm fan version A revised version which enables 120mm case fans to be mounted as lid has been added. I ran this setup with a fan powered by the AK2 Plus board directly for over a week without any stability problems. Read…
Lost the original VESA mount for the NUC mini PC and didn't want to wait for a new mount to be shipped. Also my monitor (AOC 22B2H) has a curved back which means that I cannot use the supplied screws from Intel and I'd have to use spacers…
Overview: I made this to store my old Intel desktop CPUs after a model I found didn't have quite enough space for the small “nubs” on the back of some of them. This model uses a more open design that allows for some variation in…
Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…
This model utilizes 1 ⅓ rack units (U) and offers support for securing the NUC using screws. Ensure the front side is oriented downwards when printing. Dieses Modell beansprucht 1 ⅓ Höheneinheiten (HE) und ermöglicht die Befestigung des…
This is a custom friction undermount for the Intel NUC (model D54250WYK) for under my desk to reduce clutter and keep cables off my desk as much as possible. The design is completely parametric so can be customized for other makes/models…
I needed to ship a CPU to my friend and he didn't want me to send just wrapped in bubble wrap. It fits nicely and is reusable. The hinge uses a piece of 1.75 mm filament. Print Settings Printer: Voron 2.4 Rafts: Doesn't Matter Supports:…
Rack mount for 3 Intel NUCs into a 10 inch rack. It consumes 3 height units and can hold 3 Intel NUC. Slide ins are availabe for: - NUC 10 tall - NUC 10 small - NUC 13 tall Should be printed in PETG. Additonal parts needed M3 screws and…
Holder for 16 Intel CPU with width of 37.5 mm. Compatible with sockets: 775, 115X, 1200 1700
A Intellect devourer. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Half height, low profile bracket for Intel D33682 dual port gigabit network adapter. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.20 Infill: 10% Filament: 3D Solutech PLA Silver Metal…
This is an Intel NUC 8 or later extender to give "Slim" models an SSD mounting plate. I used M2.5 heat set inserts on the top of the plate to interface with the existing NUC bottom plate, and M3 heat set inserts on the side for the plate…
Showcase your CPU on your desk. Display either the Heatspreader or the Pins/Pads. The AM4 Stand works for CPUs of Sockets AM2 and later as the Dimensions have not really changed. The Intel Stand should work for all LGA Models as the CPU…
Allows Intel RealSense D435 camera to attach to GoPro compatible mounts. Optional zip tie strain relief on USB cable with included shim. My thing https://www.printables.com/model/326547-gopro-compatible-mount-for-v-slot-20x20mm-extrusio…
I remixed the original lid from thing: https://www.thingiverse.com/thing:5232760 So I can storage CPUs sorted by brand at work. FOR AMD BOX I PRINTED AT 105% SCALE, OTHERWISE CPUS WON´T FIT All credit goes to original model. Hope it´s…
Compilation of parts for my Intel ops from my team SG-303, plus some moded parts.
Long story short - I got tired of waiting for a single-slot cooler option for the Intel Arc Pro B50 card to use with my MINISFORUM MS-A2 hosts, so I designed a replacement shell that fits the card in a dual-slot configuration, and added a…
The Dell Wyse 5070 is a thin client with two DDR4 SODIMM slots one M.2 PCIe slot, and one M.2 SATA slot. Typically the PCIe M.2 slot has a wireless card installed, but I wanted a second Ethernet port so I could run opnSense on the machine…
Mounts Intel RealSense D435 camera to OpenBuilds 20x20mm extrusion. Optional zip tie strain relief on USB cable with included shim. My thing https://www.printables.com/model/326548-base-for-v-slot-20x20mm-extrusion can be used as a base…
Just an simple rack mount for an Intel Nuc.
I needed to mount a NUC to the pole that supports my monitor, but could not slide the mount over the top of the pole like the other designs that I see on thingiverse. I wasn't sure if i would want vertical or horizontal mounting so i made…
Grab yourself a couple of 6-10mm M3 Screws that fit into the bottom side of the NUC. Mount the bracket on the wall and just slot in the NUC.
This is a cover for the Intel X520-DA2 on the M720q. It probably also works for the M920q but I don't have one. Here is the link for the OnShape
Double wood door with wood frame for the Gloomhaven board game. Some of the actual door tiles in the board game are double doors. This is a remix of robagon's wood double door to fit in Xevin's door frames, which I have adapted to some of…
Single wood door with stone frame for the Gloomhaven board game. This is a remix of Xevin's wood door and fits in his door frames, which I have adapted to some of my other posts. I wanted a stone lintel instead of a wood lintel, so I made…
Vzhledem k tomu, že jsem měl PCI Bracket pro verzi Low Profile, tak jsem vytvořil standartní velikost, která sedí do velké PC skříně.
Quick release mount for Intel NUC computer. Fits models with M3 mounting threads with 85mm spacing. Print instructions so far printed in PETG, 0.15mm layer thickness, supports on build plate below clip beams. works like a charm.
Modular Case for an Intel NUC11. Lost track of the various Intel NUC11 models. It's that one with the i5-1135G7. Without the two USB-C/Thunderbolt connectors. The case is modular. Central part is the board-one. I melted in heat sets there…
I needed a case for the Realsense camera to attach it to an robot arm; so i modified an existing one to my needs; the holes are made for M3 screws but could be edited with the step file for your needs.
Enclosure box for intel NUC computer. Compatible with NUC5i3RYB, NUC5i5RYB, NUC5i7RYB. For the assembly you will need 4xM3 heated insert nuts and 4xM3x16 mm screws. Work in progress, so stay tuned. P. S. Do not forget to click on the ❤️ 😊…
I currently do not own any 1U modules but I would like to get the most out of my Intellijel 4U Palette case so I created the 3U to 1U Adapter for Intellijel. This adapter converts regular 3U eurorack modules to Intellijel’s 1U module spec…
An anatomical human heart generated by artificial intelligence.
This piece adapts a standard VESA mount (M4) to the bottom of an Intel NUC computer (M3). STL Files include Honeycomb or Solid extrudes, Depending on user's preference. Category: Computer
Holder for mounting an Intel NUC (thick version with 2,5" drive) under your desk, modeled after NUC8BEH but might work for other NUC versions aswell. There are 2 pieces; Front piece - nuc-holder-front.stl Back piece - nuc-holder-back.stl…
Combined the three models to make this, made the model slightly thicker as well to reinforce the nodes because they kept snapping off easily on the one side where it didn't print as a single layer also made it so its possible to add a…
A rack mount for Intel NUC computers This 3U assembly fits 6 Intel NUCs in standard 19 inch server racks. Printed in 3 separate parts, it is assembled using M3 nuts and flat head screws. Ample room for airflow. I printed it using…
I've created a Honeycomb mount for my Intel NUC6i5SYH. It uses 85mm distance between the holes. Just place the mount to the NUC, mount it with M3 screws and put it into the Honeycomb wall (using the empty inserts). I also added the Fusion…
40mm Fan Adapter for 1U Servers to swap the superloud fans with 40mm (20mm wide) silent fans. If your server fan is 40mm wide and 56mm long, this is the exact replacement. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
Case for smart extension cable with Shelly Mini for Home Automation (e.g. Shelly or Home Assistant). Fitting for both, Shelly 1PM Mini Gen3 (switch and meter) and Shelly PM Mini Gen3 (power meter only). Depending on the screws (head type)…
Had issues with Intel NUC overheating, so made a little stand. Printed in ASA, but you can do it in any filament. This can be used for any device on the table. A longer version with 50mm legs is suitable for a 140mm fan. No need for…
2026-06-22 Edit: Added an offset relief hexagon version with a 21 mm offset to account for a PCI-E riser. Thanks @ichigio for the request! 2026-01-14 Edit: Added a middle ground, with relief hexagons. 2025-09-19 Edit: Added a solid…
I needed an adapterplate to mount an older NUC behind a VESA monitor. The mount is capable of using the 100mm by 100mm and the 75mm by 75mm patern for VESA arms/holders and monitors, and it supports the 85mm NUC mount spec. the NUCs can…
Intel NUC Bean Canyon I5-8259U slim 10" 1U rack mount with four keystones to access the back ports of the machine. 20% gyroid infill seems to be working well. I printed using PLA without issue also, however PETG might be more appropriate.…
Want to save some space? Stand your Mac Mini up vertically! Mini locks into the stand and can't be slide out from the back or front and can only be lifted out. Even has cutouts for the cooling vents! Works with G4 and Early Intel Mac…
Iron door with stone frame for the Gloomhaven board game. This is a remix of Xevin's iron door and fits in his door frames, which I have adapted to some of my other posts. I separated Xevin's iron door into two parts - the door and the…
Educational tool for emotional intelligence. You can move the pointing part to best represent your feeling of the day. You can use more color for the emojis or paint them for more fun ! You can insert magnet (12,2mm) to fix the board on…
I needed a backup power supply and a nice way to connect 3.5" HDD to home server running on Intel NUC (gen8). I came up with this tower to which NUC is mounted to. Mechanics are obvious from photos and a 3D model. There is a lot of space…
I really liked the Intel Space Capsule design they send to numerous youtubers / reviewers for the Haswell-E (5960x) and PCI-E SSD release. I contacted Intel, if it was possible for "normal people" to get one - but they said no (at least…
Suporte para fixação de camera intelbras Mibo *Usar as medidas da foto que ja ira da certo na camera.
Intel Inside logo in 3D. 5mm high.
Print 2, drill holes or use VHB tape, mount. will not fit Apple Silicon MacBook pros
Summary Enhance your Intel NUC experience with our custom-designed expansion enclosure. This 3D-printed housing allows seamless integration of an additional SSD SATA drive, expanding the storage capacity of your NUC system. Features:…
The model has 2 versions one with holes for airflow (Use organic tree supports to save material.)
Mounting Bracket For A Intel NUC And Its Power Supply On An Ikea Skadis. Needs Two M3x8mm Screws To Attach The Mounting Plate To The NUC. Tested With An Intel NUC Model: NUC8i7BEH Installing The Mounting Plate: Installing The PSU:…
Simple NUC6 mount plate for under desk or wall mounting.
I created this Gnome using AI (artificial Intelligence) tools I found online - for free. This does require supports and was printed at a .2 profile. I used Gyroid supports with a 5% infill. The 3MF file is for a Silk PLA print profile.…
A taller version of the existing mount to work with the taller SSD-based NUC's. Should work on multiple generations as they don't really change the case.
ASA suggested for stiffness and temperature resistance. May droop a bit but it shouldn‘t be a structural concern. Mine ended up being supported from below by the excess length of SATA and power cables running between the tray and the PSU…
This is used to remove or install the Pentair IntelliChlor chlorine generator. There was nothing available and I had overtightened the previous collar using my oil filter pliers. Perfict fit and allows for proper tork without scuffing up…
This is a PCIe bracket for Intel XF SR based networking cards. These are similar to the Intel X520 but use XFP/QSFP+ List of compatible devices: Intel XF SR 10Gbe IBM 5772 This may work with other Intel 10Gbe XFP based cards but has only…
Introducing the Easel - a printable stand for your Intellijel palette case (62 or 104HP). My first “real” eurorack case was a 104HP Intellijel palette. There were a few stands available, but after just dropping $$$ on the case and some…
Designed for the NB-BlackSilentFan 40mm (XM-1) Designed for PETG Print settings I used: 25% infill 4 wall loops Tree supports Rotate top side on build plate Sits very snug and firm. Free to use, free to edit & STEP files are in the…
Shroud for mounting 4010 cooling fan. Use M3 heat inserts.
An Ikea Skadis mount for the Ryobi One+ IntelliPort Battery Charger (RC18115)
This adapter is used to reuse the fans for the intel cpu supplied with the processor and not used due to replacement with better cooling systems (arctic noctua etc). Two versions available: inlet and outlet. Instructions: a.) check the…
Stand for Intel Nuc the thin model 34.5mm Clears the power button just fine if placed on that side. 2 versions one with hex, and one that is less sexy looking. they use roughly the same amount of filament.
This is a remix of @Seth_215443 's Intel NUC 8 or newer "Slim" SSD extender model. It extends the case of an Intel NUC so that it can fit an extra 2.5in hdd or ssd. This remix has a few small adjustments that help it fit an Intel NUC 10 (…
Intel X710-DA2 high profile slot
At some point I fount a wall mount for the Intel NUC that looked like a good design, but it didn't have any way to lock the NUC to the wall, so a bump or earthquake wouldn't knock it off. This sets out to solve that with a second piece…
A mount to fix the Depth Sensor D435i and Tracking Sensor T265 together.
![Alternative Case for AK2 Plus Intel N100 Mini PC (Firebat, Kamrui, NiPoGi) [Updated 120mm Fan Version]](https://media.printables.com/media/prints/926938/images/7229417_abf8bd94-445d-400a-9f74-0e1abaf2ebbb_0b6333b6-85d1-470d-b564-e040aaa0a8b8/ak2-plus_case_120mm_main.jpg)
