1805 modeli
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Upgrade your brush-cleaning routine with the Hairbrush Cleaner ! Featuring fewer, wider combs for a more robust and efficient cleaning experience, this…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
1:200 Desk Model of the Airbus 380-800. The .3MF file contains the parts for the print.
Wydruk około 22,44 €–27,42 € nettoWstępna wycena jednego wariantu
Hello! This Glider has been based off the world’s largest passenger plane the Airbus A380-800 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane to…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Most of the airbrush holder on the market can be installed beside you at your desk. This is the case of the Iwata holder and other 3d printable models out there. I designed this one to be installable at either the back end of your desk…
Wydruk około 1,78 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
1:200 Desk Model of the Airbus 350-900. The .3MF file contains the parts for the print. Wingtips were printed with supports
Wydruk około 13,13 €–16,05 € nettoWstępna wycena jednego wariantu
Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
I designed these paint holders to store my paints on the pitched ceiling of my shed, but they'll work on a vertical wall too. They could be stuck to a wall, but they have countersunk screw holes for easy fixing. Covering most sizes of…
Wydruk około 3,91 €–4,78 € nettoWstępna wycena jednego wariantu
If you like my models or would like a specific model made please consider donating. 1:200 Desk Model of the Airbus 320-200 CEO. The .3MF file contains the parts for the print.
Wydruk około 5,32 €–6,50 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Airbus A321 Wall Art silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
Birthday GIRL - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well The print file in…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Schrader tyre valve to airbed mattress valve adaptor, Printed in PLA. No supports. Print wide end down. Requires you to punch out hole with small screwdriver Used variable heights in Prusaslicer, main body printed @ 0.2 and screw thread…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
A vertical wallmount for the LEGO Rescue helicopter Set 42145 I printed mine in ASA 0.2 Layerheight 3 perimeters 0.4 nozzle 20% infill grid. Prusament ASA Orange. Also printed a test in PETG, which most likely would've been enough Wall…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
I embarked on this project to explore the potential of 3D printing in creating everyday objects. To my delight, I discovered that it's entirely feasible to 3D print a functional, aesthetically pleasing hair brush. This brush is designed…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update (8/19/2022): Rev C hairbrush has thicker bristles and fewer bristles to reduce breaking. Also thickened the thin portion of the handle too. Original Info: Print at a 45 deg angle with PETG so the bristles are strong but flexible.…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
My wife is learning 3D Modeling and what better place to start, than with a creature that is built out of spheres! Used Organic supports everywhere for the mouth and arms, and while it needs some cleanup after removal, it came out great.
Wydruk około 1,86 €–2,28 € nettoWstępna wycena jednego wariantu
Airbus Helicopters H130 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Sources: https://www.thingiverse.com/thing:3154469 https://www.thingiverse.com/thing:2128429 Inspired from: https://www.thingiverse.com/thing:3698200 Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Yes…
Wydruk około 7,12 €–8,70 € nettoWstępna wycena jednego wariantu
Birthday BOY - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well The print file in…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Bride - Hairband / Team Bride - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well…
Wydruk około 1,34 €–1,63 € nettoWstępna wycena jednego wariantu
Happy New Year 2022 - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well The print…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
It came to me in my dream and told me to make it. I am sorry. If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to enjoy. If you don't…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena jednego wariantu
Winter is coming and the small birbs outside should enjoy some easy food from a suitable vending machine. It's a nice de-stresser for us humans too, simply looking out at the feathery little tweeters enjoying a nice snack. So here it is!…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A magnetized storage bin for airbrush bottles (primer, cleaner, ...). You have to print this two times and then stack and glue and ideally screw it together. You need: 8x 6 x 2 mm magnets 4x M3 x 6 mm (or longer) screws 4x M3 nuts This is…
Wydruk około 8,61 €–10,52 € nettoWstępna wycena jednego wariantu
A magnetized storage bin for airbrush tools. This bin has a total height of 28 mm and the inner height is 26.8 mm. My Harder & Steenbeck nozzle and air head case fits perfectly inside it. You need 8x 6 x 2 mm magnets This is part of my…
Wydruk około 3,54 €–4,32 € nettoWstępna wycena jednego wariantu
you might need to scale the model differently according to your head size, be sure to measure first before printing just the horn part is also included if you want to glue it directly to a hairband (might fit better) print with low infill…
Wydruk około 6,26 €–7,65 € nettoWstępna wycena jednego wariantu
A magnetized storage bin for random airbrush stuff. This bin has a total height of 21.2 mm and the inner height is 20 mm. You need 8x 6 x 2 mm magnets. This is part of my magnetically stacking “Airbrush Storage” system. Check out more…
Wydruk około 3,02 €–3,70 € nettoWstępna wycena jednego wariantu
Groom - Hairband / Team Groom - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
fits 2 airbrushes compatible with iwata custom micron -C style airbrushes with air pressure adjuster air exhaust with spray guard auxilliary hose or adapter storage port prints flat no supports suitable for small european nutella jars -…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
this is my version of the files that I re made since Matt yuan himself didnt respond to me.
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 3/8" drive designed special socket for removing VW, Audi, SEAT, Skoda airbox studs, as a standard bi-hexagon socket does not accommodate the stud head. Printing Information. 0.20mm (QUALITY) layer height. 25% infill. 2mm shell thickness…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
I bought some small magnets (ø 10 mm, 2 mm height) to secure my airbrush stencils but found that these are so small that my fat fingers can't lift them up with ease. So I made these holders for them and now they are very usable. The…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A storage box for this Gocheer Airbrush Kit , specifically the 40 PSI version, but as long as the compressor is the same size, it should work for the 48 PSI option as well. Test print uses a low infill % (5%) and low top surface layers to…
Wydruk około 5,46 €–6,67 € nettoWstępna wycena jednego wariantu
Aang in a kite-car : The Last Airbender :
Wydruk około 6,83 €–8,34 € nettoWstępna wycena jednego wariantu
Model description The Airbus A380 is the world's largest passenger airliner and only full-length double-deck jet airliner. It typically has seating for 525 passengers, with a maximum certified capacity for 853 passengers. Airbus studies…
A really classic aircraft. After modeling the 737-800, I decided to model its rival, the A320 NEO. Both are to scale, same as my MD-11 and 747-100. Scale is 1:400
Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually within 24hrs. You can contact me thru private…
.1mm Layer Height 10-30% infill supports:NO Rafts:NO
Model description The Airbus A220 (also known as the Bombardier C Series) represents the fusion of performance and technology. The A220’s advanced aerodynamics combined with the Pratt & Whitney PurePower PW1500G geared turbofan engines…
Update: 26/04/2024: Added a STEP file as much requested. Kirby sucks So do fume extractors Its kinda a no brainer Almost entierly printed aside from the filter and fan Update 1: I forgot to mention, some models of fan will requite around…
I 3D desingned this model to be print with commun paramethers, it doesnt require horizontal expansion. It just need supports in certain parts. The mechanism require 4 bearings of 32mm (there are 3D bearings models that you can print, so…
The Hairbrush Cleaner Mini is a compact tool designed to remove tangled hair from your brushes effortlessly . This smaller version of the original Hairbrush Cleaner uses less material , making it lightweight and travel-friendly – perfect…
Print this lid to create a convenient airbrush cleaning station from your empty Nutella jar! Description: Use this cleaning station with your airbrush, you can empty the leftover paint or cleaning solution into the jar. The outlet cover…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed
The 2 models give you the option of either having a free-standing one or one that has two holes to be screwed into a surface
HairSnaps! HairSnaps is a modular hairband with different attachments, allowing you to customize your band to your own style! There are a couple of different ways to customize your hairband: Ready-made snaps: I've made a couple of…
This is a detailed model of the airbus a320-200. I have made this model in blender so it may lose some detail when you are actually printing it. I hope you find this model useful as there seem to be no other free realistic aircraft models…
Printing: There are no special printing requirements, NO supports . For example I print with 0,25 nozzle, 0,05- 0,07 mm layerheight, 2 perimeters, 20% infill. print max 3-4 layers. … I fix Mandala 01 Happy printing :-)
You just need to glue the Ballbearing outer Ring into the Turntable Part and the Bottom Part into the inner Ring of the Bearing. The Turntable has multiple 3mm Holes to put some sticks with parts you want to dry after painting. Also it…
I painted this model in Bambu Slicer to make it multicolored. But you can print it single colored just fine. I recommend using supports just for in between the legs.
2025-11-25 Before you print this please take a look at my new model. It as been redone from scratch to reduce the number of part and make the assembly much simpler…
Improved V2 - better hairband connector see: https://www.printables.com/model/1446163-horns-on-hairband-v2 The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA…
Fit any airbrush but this one specifically designed for the Mr Hobby Procon Boy FWA Airbrush
Models of Airbus A320 Knobs for Home Cockpit build. Files with knobs for: Ecam Efis Knob 1 - with 3mm and 6mm hole Efis Knob 2 - with 3mm and 6mm hole Engine Master 1 Engine Master 2 FCU Knob 1 FCU Knob 2 FCU Knob 3 FCU Knob 4 Flaps Lower…
If you have any questions, complains, requests, or other comments, please let me know!
This is a rework of my own model from thingiverse (from 2012). “cyclone to catch the spray while purging/cleaning an airbrush.” There may be some sputtering especially with airbrush nozzles bigger than 0.2mm. Prints without supports, a…
Simple pistol-grip handle for use with iwata airbrushes (only tested on my HP-CR). This is based on https://www.thingiverse.com/thing:5220149 , but with some modified dimensions to allow for unscrewing the back cover without removing the…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and all addons 5 perimeters to screw and head of screw…
Dimensionally accurate three-part design that can be printed and used without painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any colour…
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
Nouvelle Pose :) Speed Sculpt : https://youtu.be/-tqttQNBSig My Youtube Channel : https://www.youtube.com/c/BODY3D My Facebook : https://www.facebook.com/B0DY3D/ TEAM BODY3D : https://www.facebook.com/groups/492474174608397/ My PortFolio…
This is a remix of patprints verion of his desk clamp + the airbrush stand from BlackDemonStudio. The main reason why I made this model (2 variations) is because the BlackDemonStudio airbrush holder would slip a lot if you don't put some…
Dimensionally accurate three-part design that can be printed and used without any painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any…
For printing with 2 color on a single extruder : I've learned this method of printing from “ Davin” from “makeanything” channel, which he talks about printing with multicolor on a single extruder in 2 videos , you can found the videos…
Could not find a pot that was heavy enough and stable enough for my workspace. So Fusion to the rescue. Made it as easy to print as possible with no supports. Print Settings 4 bottom layers 3 top layers 3 perimeters Printed with both a…
Speed Sculpt : https://youtu.be/-tqttQNBSig My Youtube Channel : https://www.youtube.com/c/BODY3D My Facebook : https://www.facebook.com/B0DY3D/ TEAM BODY3D : https://www.facebook.com/groups/492474174608397/ My PortFolio :…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles Kirby inspired, Kirby, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
A stencil/Template for airbrushing Print instructions Category: Art Tools Summary A stencil/Template for airbrushing Print Settings Printer: Da Vinci 1.0A e3d v6 repetier Rafts: No Supports: No Resolution: 0.2 Infill: 30%
Dimensionally accurate MCDU with models for all buttons and lenses. Designed in 3 layers, with top layer 3D printed and middle and bottom layers either 3D printed, or CNC machined from 3mm acrylic. Designed to be screwed or glued together…
Update 2023/09/18 Version without a visible logo/name added About this project I designed this airbrush stand to fit into my workspace, following my design style and passion for hexagonal shapes. As I have a Harder & Steenbeck Evolution…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
New spray BOX for airbrush (250x250x400mm). The printing took almost four days and it consumed about 1.5Kg of PETG filament 🙀. Two 120x120x38mm fans are used, 3100 rpm and 138 CFM air flow. 3x40cm LED strip (the middle one is switched on…
Remix to fit my local brand airbrush. It's JAS 118x series like airbrush. I made it slightly bigger. Also made it snap-on. It's 11.5mm hole. To tight fit i heat it a bit with gas lighter. Supports needed. Orca slicer tree auto support…
New version of labels V2 https://www.printables.com/model/1364062-labels-for-korry-switch-a320-v2 Designed for A320 Korry switch https://www.printables.com/cs/model/103018-airbus-a320-korry-switch
Sometimes sharpies write a little too sharp. This airbrush mod fixes that by makes sharpies able to draw nice noisy airbrushed lines. Simply attach a straw that you can get with a drink at any fast food place and blow through it. The…
Paint mixing container suitable for airbrush. You can find another model here: https://www.printables.com/cs/model/364157-airbrush-paint-mixing-container-version-2
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Camouflage Stencil Template for Spray / Airbrush / Painting Size 150x170x1 mm. You can resize it in the Slicer
This is remixed from Stefan's holder for the ProFlight 2 to fit over the headset clip in the Airbus A320 series (possibly other Airbus models that share this clip?). This version also adds a headset hanger. Print upright (with the cable…
A quick design I made in an evening after seeing pictures from the latest smash direct. Printed the parts in their respective colours separately then snapped them together! I didn't require any glue but you might depending on the…
No support required, recommend 0.15mm layers or less. Maybe slide the horizontal stab all the way through the holes one sides at a time to make sure it fits. Put heavy things in the inside hidden square holes, nuts&bolts, metal, etc to…
The 3D-printed dragon clip (alligator clips) is a useful tool for securing small components. It includes a head, rod, and base, with an optional cylinder for added grip. The head holds small items securely. The assembly is simple, and it…
An EFIS knob designed for 6mm shaft rotary switch. Marker line can be backlit if lightguide is printed in transparent or opaque material. Retained on shaft with 3mm grub screw Switch body printed in matte grey PLA. Lightguide printed in…
Design to recreate the stepped and gated functionality of the Airbus A320 Flaps lever. Design objective was to create a realistic feel, with a smooth, solid and weighty action. The design therefore includes steel and brass shafts plus an…
Just a silly little Kirby :) Please remember to post your make!!! I'd appreciate it greatly!
Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…
Appa whistle, generates a high pitch noise.
The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA (matt PLA was used for the pictures) both 0.1 or 0.2 mm layer height should work. 15% infill is sufficient…
AIRBUS A320 Airplane Pop Flat Card
Hey it's the waddle dees from Kirby. Just got gifted the new 3D Kirby game. Really good game! Thought it'd be cool to model some of the little monkey guys. I'm very new to “organic” modeling lol so this one is a little rough BUT with the…
Here is Kirby without his shoes on. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Category: Sculptures
3D model oh a human lumbar vetebrae
