Liczymy pasujące modele…
A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
Sag Tschüss zu den Eisschichten auf den Scheiben.
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
This custom-designed 3D printed scoring tool is a perfect fit for the Fiskars SureCut paper trimmer, adding extra functionality for crafters, card makers, and scrapbookers. The tool slides smoothly into the trimmer’s cutting track,…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Replacement cover for Fiskars sharpener. For better strength of the locking latches, it is better to print the model on its side. Supports: yes It is definitely better to use PET-G, due to its flexibility.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a blade holder for sharpening rotary cutter blades that have a 10mm shaft size. The cutter I made it for had a 60mm blade. Disclaimer!!!!!! Using this can be Dangerous!! Use at your own risk!!!!
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed this in Prusament PCBlend so that it doesn't deform in my garden shed in summer. PETG should also be working, though.
Holders for axe and Fiskars Xsharp™ knife sharpener. Tested with axe X10 and X17.
Wenn sich nach einiger Zeit der automatische Auslösemechanismus nicht mehr funktioniert, muss die Feder im Inneren nachgespannt werden (Vorsicht). Das hier bereitgestellte Werkzeug kann mit einem großen Schraubenzieher genutzt werden, um…
This hook will allow you to put your shovel or pitch-fork on a wall safely till next time you'll need it. I made it, so I could hang the snow shovel till next winter. The hook wide enough (90mm), so the shovel will stay in it's designated…
Taking inspiration from the iconic Fiskars scissors with orange handles, I did a Fusion360 cad model as I broke the handles by accidentally dropping my scissors on the floor. It is not like the original, but brings the scissors back into…
Wearable sheath for the Fiskars X7 hatchet. Can be mounted to Tek-Lok style belt clips. Mounts facing forward on the left, mirror parts for right. Two mounting styles: fixed or pivot. Pivot can spin around on the belt clip, fixed cannot.…
I was looking for a Fiskars hobby knife holder for #gridfinity but couldn't find one. So I remixed kaspertulstrup's x-acto knife holder to fit the bigger Fiskars version. Gridfinity is the ultimate organizer for your whole workshop! Zack…
Handgriff für eine Astschere L99 Fiskars, Ersatzteil für den Handgriff Handle for a L99 Fiskars loppers, spare part for the handle
This is the central cog for Fiskars hedge scissors HS72. It broke and I remodeled it for printing and thought it would b
I recommend to print it from PETG.
A simple craft knife holder for the Skådis / Skadis peg board. It protects the blade so does not make room for the cap. I printed it with 3 perimeters and 15% Lightning infill and it seems super sturdy. Supports are needed for the pegs.
Height of the holder matches height of the Ivar side plank: 40 mm. Use 25 mm screws, if the shelf is right behind the plank, screw could be longer. 20% infill, 3 perimeters, PETG recommended, print in place, no supports needed.
This prints as oriented. Max bridge length is ~10.5mm, and the tolerances include this bridging. Sheath is just the right kind of snug! the orange one has a bit of holofoil laminate on it 😎
The Fiskars X-series ultra lite axes are great for hiking and their smallest X13 model would make a perfect emergency axe if the empty handle could be used for storage, this cap does just that! It is made in two versions, one hollow with…
I wanted a holder to put my two most used cutting tools in one place. This was designed to fit the “AFA Tooling” deburring tool ( Amazon link ) and Fiskars clone of xacto knife ( Amazon link ). I find the Fiskars version more comfortable…
I tried to find a nice case that would nicely (and safely) hold a hobby knife, because the original cap just seemed a bit flimsy. Couldn't find one, so I made my own! Also as a bonus, the case holds a spare blade box. The knife is about…
to easily have it hang on the wall
I broke my hobby knife cap so, I made a new one. It's not perfect but it's a suitable cap for the fiskars hobby knife. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: No Resolution: .12mm Infill: 50%…
Adjusted inner diameter for QuickFit extensions. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 30% Filament: Does not matter PLA, PET-G Category: Household Supplies
Nothing too fancy, held on with double sided tape on the side of my desk for quick access. The part number on my snips are AA0620.
Handle for Fiskars replaceable tools. I printed from ASA in two parts (A and B) and glued. SW x2 nozzle 0.4 layer 0.2. You can print with Petg, it should also withstand. A slight cut can be needed on the handle. Fastening to the nit.
https://youtube.com/shorts/XhEza27AbTo?feature=share print the model standing up! some of those tools I know it fits: Hedge shear HS52/53/72 Loppers L32/70/77/74/31/78 tell me if you know more models! added a clamp that fits the L5532
Printed with Prusament ASA, 5 perimeters (fully filled walls), adaptive layer height. Wall thickness is 3.5 mm. Bottom plate geometry is shown in a picture. Tested with telescopic handle L.
Holder for fiskars tool attachment
A hook board that is designed to hold a set of Fiskars hand garden tools, the hooks are shaped specifically for the design of hole in the handle that this Fiskars set has. Print Settings Setting Walls 2+ (I used 6) Layer Height 0.2mm…
Mount for holding three small gardening tools where the hole for hanging the tool is greater than 1 cm in diameter.
Update --------- ___ easy to print ___ Garden hose water sprayer holder for irrigation. A tripod stand with adjustable angle or alternatively a simple bipod stand. Simply clamp the hose coupling into the hose holder to irrigate your…
I recently bought Fiskars detail knife , but the protector it came with can fell off and wear down with time. I decided to use my leftover magnets from previous project. The magnets hold the case closed and holds the tip in place as well.…
Thanks to TheMADEngineer for his design, which looks like it solves a similar problem. I was not happy with my original design however so used the sprinkler pattern from his model, scaled to fit. The square hole to one side is because the…
Inspired by: https://www.thingiverse.com/thing:5359910
An arcade sequel to Thayer's Quest (which is what a few Dragon's Lair cabinets were converted to back in the 80's), Kingdom II: Shadoan had a few minor items to collect throughout the often confusing and sometimes incoherent journey that…
Printed in PETG/0.2/20% infill. I printed mine laying on back with supports, but should be working with bottom on the plate.
This isn't the prettiest model, but it is functional enough to solve my issue. I didn't like that the Fiskars thread snips I use for sewing lay in an always open state, apparently newer models now have a closure mechanism. I designed this…
This case stores the contents of a Fiskar's sewing kit (up to 12 spools) and features a magnetic closure. The pin cushion is created by folding a paper towel or square of microfiber cloth and tucking it into the rear slot. You will need 5…
For use with Fiskars Pruning Shears (P121) . May fit others, but I have not tested any. I left the back of this model empty & clear to allow you to use your preferred mounting method. I am using this holder with a Gladiator…
I have several of these snips and they work great… except the lock wears out overtime and they keep popping open. A quick run at a replacement part and here it is. I made it a bit snug and it works well. One end is flat so that it can…
The cap that came with my knife allowed the tip to extend past the top of the cap, usually right into your finger. I created this replacement and included a reminder that the #11 hobby knife only allows us to use it with the required…
Replacement clasp for Fiskars bypass pruner. Printed from PET-G, 0.15 mm layer height. If oriented as shown on attached picture, supports are needed only for bottom bridge. PLA should also work, probably with better overhang performance,…
The Fiskars Hardware (21cm) scissors are a bit wider and did not fit well in the original holder. I made the opening 20mm to make the bigger scissor fit well. Print Settings Printer Brand: Creality Printer: Ender-6 **Supports:** Yes…
I have had these for 20 or so years so and the clip broke 4-5 years ago so I finally got around to replacing it. This is a modified from the remix to fit this exact model not sure if it would work on other models. I of course tossed the…
The hand grip is printed with ASA and is smoothed with aceton by spraying. I have used spraying to finish only outer surface of the hand grip, because warping is lower if only partial surfaces are smoothed. The hand grip works also fine…
Simple prints. I cut (with a small chisel) a slight notch on both sides of the original snips to allow the new clip to slide into place. The clip is direction both left-to-right and top-to-bottom.
Fiskars manufactures a line of tree pruning tools with extendable reach and a pull string operated pruner. They are popular and effective pruners and a good value. However, the pull string has to be long enough to function at full…
Just use an M8 x 40mm hex head screw and screw in.
based on Zack Freedman’s awesome Gridfinity system. I made this to hold my Fiskars circle cutter. I am new to designing so used his base model and added to it in ShapR 3D. The step file is included if you have a different model.
This print turns the Ikea Iskarna LED light into a VR headset stand, with a spot for the controllers. It mounts using an existing screw, just remove the screw, set the lamp on the print and screw it back in.
Sheath for Fiskars needlework scissors. Fits the 13cm size. The “fish tail” shape helps pulling the scissors out of the sheath.
A tight friction fit to help keep you and your projects from getting poked by these scissors.
Fiskars Micro-Tip wall bracket to screw on the wall. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PLA black Notes: There is no specific need. You…
FISKARS tool hanger for wall mounting
My Fiskars Ice Scrapper blade broke and since I really like this thing, I decided to fix it. I printed it from PLA so I need to get it out of my car for summer but other than that it works just fine. Some support is needed for this print…
A replacement Clip for Fiskars Scissors.
This is a custom designed wall mount for the Fiskars 23 Inch PowerGear Hedge Shears. There are many models of Fiskars products so please see the photo to ensure you have the right one for use with this wall mount. Included are the source…
Replacement clip (the white clip in the pictures) for an older model Fiskars RazorEdge Micro-Tip Easy Action Shears. It's a customizer so if it doesn't fit yours you can adjust it. V2: Version 2. – Version one lost its grip over time, so…
Handle to replace the thumb side of a pair of orange handled Fiskars scissors I broke. Uses the old screw. Supports are required. Added OpenSCAD version with rounded edges. Re-rendering takes a rather long time due to complex minkowski…
typ 1 perimeter 3 infill 15% typ2 perimeter 2 infill 15% PETG,PLA,ABS
A pegboard holder for Fiskars multipurpose snips
A Fiskars utility knife inlay for Gridfinity 4x2 bins.
TPU tool holder 100% scale fits with axe 90% scale fits with other tools
Wall bracket for Fiskars pruner P521 and all other with similar blade shape. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Filament: Prusament PLA Black…
Wall holder for Fiskars PX92 Pruning Shears. Printed in PETG, 0.2mm, no supports.
Fiskars Quikfit broken lock - no glue repair / náhrada zlomeného zámku Quikfit bez lepení - print in PETG or any a little bid flexible material / tisknout v PETG (3 perimeters, no infill) - clean the hole from any left broken edges with…
Riser is made to fit Iskarna lamp base to acomodate my Deadpool mask.
This is for the Fiskars 14 ft PowerLever Tree Pruner (1-1/8 in. cut capacity). It likely works with the shorter and longer models as well. It is a great tool, but there is not a built-in way to manage the pull rope for the pruner to keep…
Držák zahradní nůžky fiskars P26 POKUD SE MODEL LÍBÍ DEJTE PROSÍM LIKE A STAHUJTE DĚKUJI
This is a replacement slide lock for use with Fiskars Softouch Micro-Tip Pruning Snips for use when the original gets brittle with age and breaks I used PETG which seems to work just fine, but other stiff materials may also be acceptable
Uses the m3 insert from the original honeycomb wall storage system. https://www.printables.com/model/152592-honeycomb-s
I wanted a place to hold my Fiskars Hobby Knife because I use it so frequently. I can't currently drill anything into the walls where I'm staying and so I haven't set up a Honeycomb Storage Wall or an IKEA Skadis or pegboard or anything.…
Printer: Ender 3v2 Print settings: Filament-PLA Infill-40% Layer height-0.12
4x1 Gridfinity bin for Fiskars 45mm rotary cutter.
Nechtělo se mi vrtat do zdi, tak jsem si držák upravil na rám Prusa tiskárny.
Fiskars knife stand Designed for Fiskars Functional Form 1057558. Print : 2x side 1/2 (brim for better adhesion recommended) 2x spacers 1x logo fiskars Glue it together with super glue. Print Settings Printer Brand: Creality Printer:…
I like my Fiskars lightweight Easy Can Sprinkler. The original sprinkler cap has destroyed by UV-light over years. At first I was searching for already constructed models of the cap. I found only one STL on printables. But this was…
Printed with X1E, filament ASA 3DROSA. The model fits into the scissors by pressing.
OnShape model insert up to two 25mm x 8mm magnets use 4-4.5mm countersunk screws to mount
I've broken my cutting thingy while trying to destroy a big tree root. So here's the replacement part :) Testing: PLA → enough to cut thin “yearly growth” PETG → enough to cut like 10mm-12mm diameter branches ABS → unknown. PA+CF → good…
This is for horizontal storage of the Fiskars extending tree pruner / polesaw. I make it to hang mine saw up near the garage ceiling out of the way, since it gets limited use throughout the year. Mine is printed in PETG with 0.20mm layer…
With my hands shaking, I was finally able to cut a long, straight line.
Repalcement grip for Fiskars precision knife. Better in flexible fillament like TPU.
FiskarsX7 mount jeep Wrangler
i modelled the cutter blade from my fiskars paper trimmer to make one that can only crease. it slots in the same way as the original blades. it seems like all fiskars blade type paper trimmers use the same design, so it should fit on…
A “copy” of a broken original Fiskars part. Could have been made better but it works.
Got this small scissors for my bathroom and wanted to make a place to hold them so they don't end up all over the place and getting lost. The scissors I got from Amazon are "Fiskars 5 Inch Non-stick Titanium Softgrip Detail Scissors" and…
Print on bottom face with a brim to avoid supports. I used orange ABS and a .15mm layer height to match original. Part will need to bend to snap into place on the scissors, it feels like you are going to break it during install but it…
1x4 bin for an Xacto Knife. Remixed from a 2x4 that included a spot for a deburring tool.
This is a snap on piece to wrap the cordage around for your Fiskars pole saw. I’d print it in PETG since it has a little more give when snapping it around the handle. There is some hardware required for assembly: 8x M5x16 bolts 8x M5x5.8…
A knife cover for the blade of the small Fiskars knife. It's a bit narrower than the actual blade to have a tight fit. Printed in PLA: 2 shells 3 bottom and top layers 0,2 mm layer height infill doesn't matter brim plate adhesion was…
Helo, when you buy your knives set you are limited to 5 pieces. Like in my case i bought more knives separately, but had no place to put them. Block is printed 0,15mm in Antracite PLA from Fiberology, I am begginer so did not wanted to…
My wife is heavily into various forms of crafts. As such, she uses many different cutting tools many which are different size scissors. The scissors that this cover was designed for are Fiskars Micro-tip. These scissors are extremely…
