2155 modeli
Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Print-in-place and Articulated Surprise Egg #6 - Tiny Jet Fighter 'Making of' video: https://youtu.be/hjCWHOE4sb8 Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. Both the jet fighter and the egg was each…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Jetson Nano Case A minimal snap-fit case for the Nvidia Jetson Nano. The original design ( thing:3603594 ) by ecoiras was very well done, but I prefer cooling over the logo. This is for the 4GB kit with all the ports, but I imagine also…
Wydruk około 5,14 €–6,28 € nettoWstępna wycena jednego wariantu
NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case…
Wydruk około 7,27 €–8,88 € nettoWstępna wycena jednego wariantu
I found this case for the jetson nano and I liked the pattern. The extra height required for the fan was something I did not need. As such, I made a similar model with the same pattern. The jetson nano pcb requires 2.5mm screws. As I only…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
F-14 Tomcat US Navy Fighter Jet (Made Horizontal For Less Support And Smooth Print)
Wydruk około 6,86 €–8,38 € nettoWstępna wycena jednego wariantu
The perfect cookie cutter for jet fighter enthusiasts, I recommend printing with PLA or PETG and the basic print settings should work fine.
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Inlet Nozzle for LAY-Z-SPA connector (post 2019) that diverts the water flow to the side. This is just a re-upload of the original creation of CoquetTech which I found on thangs.com and want to use as a base for Remixes but it is not my…
Wydruk około 3,41 €–4,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you like my work, don't hesitate to support me by paying me a ☕ https://ko-fi.com/fred2u
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
RC Water jet turbine This 3D model represents a compact water jet propulsion system for an RC boat with an axial arrangement of components, where the DC motor is located at the front of the assembly and the boat propeller is positioned at…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
New York Jets Logo 1st Layer White 2nd Green
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
This is the Cutter Gear for HP Designjet Plotters like T120, T125, T130, T520, T525, T530, T730 or T830. This was remixed from original at Thingiverse by ripetomatofetish for better fit on the cutter case. I remixed the stl on Sketchup,…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Did your end caps fly off somewhere along a long country road? Don't want to spend $5 to buy replacement end caps for your Yakima JetStream roof rack? I didn't either! These are designed as a replacement based on the original model that…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed the Lucky 13 Mandalorian costume by CrazyBird199, but the rifle and the jetpack did not print well. Closer inspection showed completely hollow interior and too fine details stretching the printer to its limits. Regarding the…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Jet-Vac (light) Skylanders
Wydruk około 15,66 €–19,14 € nettoWstępna wycena jednego wariantu
Fits top part as normal but this version has a hole in the bottom to allow for the 1TB NVME with heatsink which does not fit in the original case bottom.
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Magnet based on a F-35 Lighting II fighter jet. This model is designed to use small 6mm x 3mm magnets. G-CODE has a layer pause at 3.8mm to add the magnets.
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Jeton in der Grösse eines 1 Fr. Stücks, um Einkaufswagen zu entsperren. Gedruckt in PLA, 100% Füllung.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
8 Verschillende bolders voor de modelbouw 1/87ste om boten aan te meren aan de kade. Ik heb het op ware grote getekend en dan verschaald naar 1.15 voor 1/87 te bekomen. Voor de modelbouw zal het niet te veel moeite kosten om met wat…
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
Box for Jetson Nano Multicolor
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
Jetons for a casual Poker night. I designed these with the logo of my german Gaming Clan Spartans Rising (we do have some Gaming Montages on Youtube) these are printed in PLA and 0.15mm layer hight ( I tried to include a variable layer…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Free up space on your crowded workbench and hang up your work of art. Uses two nail to attach the mount to the wall. Has curved mounting finger to match that of the curved prop slot used in V5 RCPowers park jets, however should fit any…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
This is a custom designed 3d print model for the Jetson Scooter's brake. My son's brake busted and I redesigned it to be stronger than the original using this model, and printed in a fun color. I hope you enjoy. To add stability I used…
Wydruk około 2,67 €–3,27 € nettoWstępna wycena jednego wariantu
Mesdames, Messieurs, Ne cherchez plus un jeton dans vos poches ou au fond de votre sac, chercher plutôt un caddie de libre, le reste vous avez avec vous… ✅ 1.- ✅ 2.- ✅ 1 € ✅ 2 € Modifications: 22.04.2025 profondeur d'extrusion modifiée.…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Boeing B-47 Stratojet Strategic Bomber Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Sistema de tope de puertas con manetas, además se puede dejar sujeta la puerta para que se mantenga cerrada.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Wall Mount for iRobot Braava Jet m6 Mopping Pads
Wydruk około 9,66 €–11,81 € nettoWstępna wycena jednego wariantu
This is used to replace the Jet throat plate for a band saw.
Wydruk około 0,54 €–0,65 € nettoWstępna wycena jednego wariantu
The HP LaserJet MFP M140w always feeds the paper at an angle and the printouts become unusable. That's why I designed a paper guide. Simply attach the two brackets. The paper is no longer fed at an angle. The paper guide is needed twice.…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a holder for a JetPens exclusive Kanso Noto notebook. For those who don't know, the Kanso Noto is a notebook filled with delicate paper for writing on with fountain pens. It can be found here ! Since the pages are so delicate, I…
Wydruk około 7,71 €–9,42 € nettoWstępna wycena jednego wariantu
Las medidas de la foto están en mm por lo que realmente son unos 6'5 cm de ancho y 3'7 cm de alto aprox.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
The Maker Faire mascot ditches the reindeer and uses a jet engine. The robot may have forgotten to build controls, but hey, looks like they're having fun. No mmu required! Only a color change by layer height for the hat is required. Print…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
notes d'impression impression sans support (face en bas) mettre l'option “détecter les parois fines”
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
J'ai créer ces jetons car j'aime bien le jeux de la roulette mais ils peuvent très bien servir pour faire un poker etc.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
This cover for the Oral-B OxiJet oral irrigator prevents dust and other particle from collecting in the water tank if the lid is kept open. In general, the toothbrush heads dry faster when placed upside down with the lid open, preventing…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
100x160mm sign, advertising the ACME Jet Bike. The new and improved model features brakes; an important innovation. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu
Token for the “ Token tower ” , you lost one or need more look no further. They are designed to fit perfectly with KANO editions the Token tower . And the lite version you can find on printables. The hole and shape are thought…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena jednego wariantu
spiral step 5015. spiral for prusa mk4 fans coming soon
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
modification pour mettre une bague de roulement en laiton
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
A quick replacement that fits into the hole when one of the original stands break. Printing Since it will be bearing a constant load and might warm up a little I would recommend to print it in PETG or a material with even higher tensile…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Another object joins the Cube Series! This time, a classic house has been transformed into a simple cube-inspired design . The model keeps the recognizable elements of a small house, including the roof, chimney, window and door, while…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with visual cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there's some resemblance there...…
I've put all the pieces together to print an authentic “The Madalorian Cosplay” with quick instructions. Please pay attention to the size of the parts! scale the parts to your size 12.09.2023 - added new model - The Mandalorian Cardridge…
If you like this model, please follow my profile - it will help me a lot 😎 TwinJet Speedboat is a lightweight, balloon-powered water toy designed for quick, repeatable launches. The first two gallery images are visualizations created…
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…
Introduction The 3D Printable Jet Engine is great! However, I wanted a turbojet or low bypass turbofan to complement the original. So, I got to work designing the turbojet, afterburner and variable exhaust nozzle. This conversion uses…
This is a modified version of my Surprise Egg #6 - Tiny Jet Fighter, but bigger, smoother and with a stand https://www.prusaprinters.org/prints/10652-surprise-egg-6-tiny-jet-fighter Commercial license Do you want to sell prints of this…
Modified from WF3Ds to fit the one from the game a bit more and to make painting a tad bit easier. Recommended printing vertically with supports (tree supports work wonders on this). NOTE: some printers can handle the overhang with no…
Update : Revised STL to rotate matching recommended print configuration and repaired non-manifold issue some people experienced. The stock S1 cooler isn't exactly great, and I wanted a bi-directional cooling design with a stronger 5015…
Projectvideo (F14 with breakaway): https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real MiG better, while still being print-in-place and articulated.…
Remix of 3D Printable Jet Engine by Catiav5ftw and calebfwood. Grouped and sliced for Mini+
Found this really cool jet over at the 3D where house made by Tony https://3dwarehouse.sketchup.com/model.html?id=4ed01f44e3e422dff64801ad2940cdd5 Seperated out and cleaned up the files as best possible. Certainly enough pieces here to…
NEW DESIGN: https://www.printables.com/model/496157-jetboat-hull-new-design Boat for wild river runs. There is a hull extension available to extend the boat length. THERE is a new hull design:…
Projectvideo: Stresstest your 3d printer by downloading and printing this tiny print-in-place Surprise Egg for free! Both the toy and the egg was each designed to be print-in-place without any need for support structures. The toy has…
Hi guys, this is my 1st Jet Boat, made in 2021, fully 3D printed. This is an easy project to print and assemble. Youtube video link: youtu.be/52TS3p7NUL0 In the instruction manual are images of the assembly of each part of the boat and…
This is amazing model was made by rndmframes_printing and the licensing allows sharing with attribution so I wanted to make sure the prusaprinters.org visitors didn't miss out on it by re-uploading! Original link here:…
I always was curious about, whats the best compromise of the original gardena variable jet for maximum water flow, to minimize my time efffort for watering my garden. So i tried many different designs by myself and came to this simplified…
Hey all! If you're here, you probably want a cool mounting solution for your JetKVM into a 1U rackmount form factor. You're in luck! Below I've outlined options for both fully 3D-printed solutions, as well as hybrid solutions utilizing…
Printer used: Anycubic Kobra Plus Layer height: 0.2 Brim: yes Raft: no Supports: Yes
I roughly based the aircraft off of the American F15 Strike Eagle.
A high bypass fan inspired by Rolls-Royce's Trent series turbofans. The fan blades print separately from the disk and are designed to slide in, just like a real fan. The blades can stand up on their own, and the whole fan can also balance…
An extuder motor indicator made from a 3D Printable Jet Engine's fan by CATIAV5FTW - scaled down to 25%, with a cone or without. Link to this awesome printable jet engine here: Thingiverse There are three versions: With an integrated cone…
So, I was making a CF-101B voodoo display for my grandfather and decided to make a J-57 turbojet engine (or something that approximates it) to go along with the airplane. The goal was to make a simple turbojet that went together w2ithout…
About the F-16 Fighting Falcon The F-16 is an american single-engine supersonic multirole fighter developed by General Dynamics for the US Air Force. It was designed as an air superoirity day fighter, but evolved into a succesful…
This is a 54mm jet drive that can be used for an RC boat. I used two of them for an electric surfboard. I designed these jet pumps because I couldn't find anything that met my needs. I hope they are of use to someone who is looking for a…
This model was made by jetpad! You should follow him! He works with fidgets, upgrades and a COLOR MIXING PRINT! If jetpad wants to take the printables version down, he can. He just needs to ask. By the way, thanks for like, 1000…
The McDonnell Douglas F-15 Eagle is an American twin-engine, all-weather fighter aircraft designed by McDonnell Douglas (now part of Boeing). Following reviews of proposals, the United States Air Force (USAF) selected McDonnell Douglas's…
This hull works with all the parts of this model: https://www.printables.com/model/51680-3d-printed-rc-jet-boat/comments/897854 https://youtu.be/-7sSGXb9A3U?si=2WvybAz3n-ELLGuw jet housing is included in this model. The deck has to be…
- Toy style two-piece dual color version of Lockheed Martin's Blackbird SR-71 and F-35. - Easy to resize, easy to print (no supports) and to be used as giveaway, toy, or design object - ideal with the small optional stand for a table. -…
Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…
Hi Keo, these particular models are a little out of my depth and what I've discovered is they need to have the wholes on the mesh fixed up first before they can become a solid. Something I have yet to learn about in Sketchup. As this…
An accesory to be used with my rotating machine print . Print on the given orientation, no suports required.
About the F/A-18 Super Hornet The Boeing F/A-18E and F/A-18F Super Hornet are a series of American supersonic twin-engine, carrier-capable, multirole fighter aircraft derived from the the McDonnell Douglas F/A-18 Hornet . The Super Hornet…
Projectvideo: https://youtu.be/zUH6NLYGv7Q This is a modified version of my Surprise Egg #13 - Tiny MiG Jet Fighter, but bigger, smoother and with a stand https://www.prusaprinters.org/prints/66335-surprise-egg-13-tiny-mig-jet-fighter…
Quick and easy to print bookmarks with a fighter jet theme. Includes F-14, F-35, A-10, Tornado and Typhoon (yeh I know the A-10 isn't a fighter!) I've included several variants of each bookmark including facing up or down and with or…
Parts (what I used) Bronze Bushings - https://www.amazon.com/gp/product/B07JLPC8TS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Shaft Couplers - https://www.amazon.com/gp/product/B0867P8H6D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1…
This is Jett's Blade from Valorant. Have fun. ;) Notes: You can print it in one piece, standing upright. Only use supports in the middle for the ring. Otherwise it prints perfectly. :)
Update 08.05.2020: we used the motor: https://hobbyking.com/de_de/propdrive-v2-series-4248-650kv-brushless-outrunner-motor.html?queryID=821f8e5965ad229ef4e011a419d1228a&objectID=59142&indexName=hbk_live_magento_de_de_products ESC: 70 amp…
https://www.instagram.com/p/C0ZsZbDrwg0/ What if Blue Angels used F14?! Tiny 3d printable print-in-place and articulated f14 in colors inspired by the Blue Angles! The built in wingtip support breaks of with a satisfying snap and leaves a…
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
Jetson Orin Nano case I made for myself. Bottom part has 2 versions for one with PCI slot screw holes and the other is without them. Feel free to delete the mark "gears.com.tr" if you wish. For extra tidiness I punch 2 small holes with…
About the F-35 Lightning II The Lockheed Martin F-35 Lightning II is an American family of single-seat, single-engine, supersonic stealth strike fighters. A multirole combat aircraft designed for both air superiority and strike missions,…
A remix of Figter Jet v2 from Edie S. I redesigned the wings a bit more close to the F-18 design. Can be printed from two separate parts without supports and then glued together. Print was tested with PLA. Edit 17.09.2022: Added non-split…
This is the modern version of my other Jet Turbine Fan Fidget Spinner. I designed this to resemble todays' "Fan" section of a jet turbine engine. Simply blowing on it will spin it. The fan is directional. Due to the curve of the blades,…
This is an improved version of my previous paint holder, having two advantages: a) can be printed without any support b) vallejo-paint bottles can be stored head down at all positions - this is especially helpful if the bottle gets close…
About the Su-27 Flanker The Sukhoi Su-27 is a Soviet-origin twin-engine supersonic and supermaneuverable fighter. It was intended as a direct competitor for the large US fourth-generation jet fighters such as the Grumman F-14 Tomcat and…
Its a rough design of Rafael fighter jet, note: it won't fly. If you like my 3D models. Please consider buying me a coffee : https://www.buymeacoffee.com/Shikko15
Water jet for a tubular pool to be fixed onto a bar (maximum bar diameter 60mm) and connected with a hose to the pump outlet. The hose used is the one provided with a classic hydraulic robot. The water inlet diameter is compatible with…
Update 05/15/2022 Now includes two different orientations for each bookmark as my kids wanted it to look like the jets were flying out of the book ;) Details Three quick and easy to print bookmarks with a fighter jet theme. Includes F-16,…
Horten Ho-229 WW2 Era German Flying Wing Fighter Jet
This was made because I couldn't find any free keycap designs on Thingiverse so here you go. Please let me know if you want me to make keycap sets for any other Valorant character's abilities. I will try to get back to you as soon as…
It is difficult to print this accurately since there is no good orientation. The originals (in colour) are most probably injection moulded. I printed it horizontally , the top side came out amazing with ironing but the bottom side…
Description This stand is heavily inspired by peteyen86 . Adding some details and making the jet sit lower to the ground. It works great! Easy to print with tree supports. Check out the Afterburner & Variable Nozzle for the turbojet this…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
made using 3 views from the internet I didn't have accurate fuselage and wing sections so everything is just an approximation, maybe someone that has foaming filament can use it to make an edf rc plane out of it
Late-WW2 Era German Fighter Jet Messerschmitt Me-262
Needz MOAR boat? U can haz 4/3 moar here: https://www.printables.com/model/413647-rc-boat-pump-jet-boat-large-yao-kong-chuan-pen-she Note I am seeing copies of my design being posted by other users in violation of site TOS - I am the…
The V3 release features a new custom PCB by Cyberfox361, revitalized electrical design, many bug fixes and upgrades to software, improvements to the overall shaft-alignment, new components, bill of materials, and the introduction of…
