2785 modeli
EDIT: updated parametric version It’s also possible to use it without the inner box. The purpose of the inner box is to let coffee pucks dry so mold wouldn’t develop so easy. Buy me a coffee
Wydruk około 3,60 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To be honest I've never really made lures before, I've modified spinners a bit and tied crappy looking flies before but seeing Marling Baits on youtube make the tiniest crankbait, inspired me to make a tiny crankbait of my own. I present…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
Wydruk około 7,94 €–9,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Perfect light for your micro model's workstation. Almost everything is printed. You just need a 2m LED strip - for me this works just fine. It is cool white and it comes with a wall plug and a dimming function as well. The best on this…
Wydruk około 3,29 €–4,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, This print is comptible with the Küpper workbench and can hold up to 6 screw drivers. It is personalized to my need, but should remain fairly standard for normal other set of screw drivers. You can leave a comments, I am always open…
Wydruk około 4,55 €–5,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This versatile fishing lure is designed for customization, featuring internal cavities for adding weights (up to 11 mm in diameter, 2x), as well as a dedicated cavity for steel wires to secure your fishing line and treble hooks. For ease…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Issue I recently purchased a Husky 9-drawer mobile workbench and I loved it immediately except for one thing. The drawers have a soft close mechanism which requires extra opening effort over typical ball bearing drawers. Because of…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed for Coptic stitch bookbinding technique Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on center of each 0.13" (3.3mm) hole. Markings are recessed…
Wydruk około 5,38 €–6,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted a simple featherboard for my workbench router and decided that it was better for me to print rather than buy. Fusion 360 files included (but it can get messy when resizing.) I probably could have made the model 1mm thinner and…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I finally decided to publish some of the lures I designed and rapid prototyped a few years back. This topwater stickbait / pencilbait has a length of 7cm / 3'' and weights approx. 7g / 1/4oz without hooks. I already caught many perch and…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updated: March 05th, 2020 23:01 UTC+2 Changes Added Fusion 360 Files (*.f3d) Referred to a remix made by madebymonkeys Have you already printed one? (Update) If you ran into issues with the cold shoe, then you should have a look into the…
Wydruk około 1,21 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A friend wanted to create this hilarious deckbox , but he couldn't find a food can with the required dimensions. So 3D printing saved the day! This deckbox is specifically designed to the dimensions of the label from the reddit post. It…
Wydruk około 11,46 €–14,01 € nettoWstępna wycena jednego wariantu
Bass fishing lures, Salt water fishing lures, Stick baits, Crank baits, Top water baits, glide baits ...whew. There are a lot of baits. And all of those baits are have a lot of sharp pointy hooks. If you are like most of us fisherpeople,…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Update : *Spool Mount parametric Design added. -Just change the id and od of spool mount in FUSION 360 and design will update. (see photos for more information) This is the Super organizer for your nightstand or desktop. No hardware…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Magnet based on the SR-71 Blackbird. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
This is only the clamping part of my One-Hand Clamp Mod which allows the use of Bessey EZM and Wolfcraft Pro M directly on your perforated grid plate Workbench. This version works without an endstop and therefor doesn't need any Screws.…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pluggable tea light collector. Can be pluged together in the desired size and layout. Ideal for not having to store loosely tealights anymore, they are ideal for quick preparation in the kitchen.
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
Bobble the head of your favorite Decepticon agent of Espionage! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
These are some replacement parts for the Hape Master Workbench (E3000) and Master Builder Set (E3081) . You can see my models alone in one picture, and my models alongside the originals in the other picture. Printing instructions Print…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
This is a simple set of corner pieces for stylish extension arms for a lalmp above any workbench, desk, countertop,… The corner pieces are connected with aluminium 15x15 square tubing and a cable way is included in the diagonal piece.…
Wydruk około 6,14 €–7,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Geschenkbox mit Deckel in Form einer 16. Kann mit eigenen Geschenken gefüllt werden. Gift box with lid in the shape of a 16. Can be filled with your own gifts.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Workbench waste bin, which can be attached to your workbench. It fits for workbenches with a thickness of 24 to 45 mm. Ideal in combination with the hand brush: https://www.printables.com/model/1433245-hand-brush-broom-handfeger -…
Wydruk około 9,10 €–11,13 € nettoWstępna wycena jednego wariantu
Da ich mehrere Fahrräder habe, hab ich mir das Modell erstellt. Ist für eine Klic HP (high pressure) Luftpumpe. Durch den kleinen Schlitz hab ich ein Stück Klettband zur zusätzlichen Arretierung gezogen. Gedruckt mit PLA 15 % Infill…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
Crankbrothers Multitool-Halter für MTB zur fixierung mit Kabelbinder am Rahmen. Hält auch ohne Sicherung!!
Wydruk około 2,84 €–3,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
See the picture with the distance of the screw holes, my be you don't have to drill. Print the model twice, no support. Drucken Sie das Modell zweimal aus, für oben und unten. Sie benötigen vier Spax Schrauben. Sehen Sie sich das Bild mit…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
I am a Big Yugioh Fan and i wanted a special Deckbox for my Cards. So i printed myself one. The Box closes not bad but you have to clean a little bit around to make sure it closes and opens properly. The first Time when i closed the Box,…
Wydruk około 17,39 €–21,25 € nettoWstępna wycena jednego wariantu
Easel With board/Chalkboard for wishes or greetings Perfect decoration for Christmas table or any other decoration I printed Easel using White PLA and blackboard in Black to use white chalk ( which I don't have at the moment of taking…
Wydruk około 2,05 €–2,50 € nettoWstępna wycena jednego wariantu
Intro This is an updated and modified version of my previous Workbee dust shoe . The previous version had a wing nut sticking out of the side (which I found a bit annoying although it wasn't hitting the Workbee frame) and the attachment…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zumindest teilweise verzichtet Braun auf den Farbring der Oral-B-Aufsteckbürste und hat die Konstruktion so geändert, dass keine vorhandenen Farbringe genutzt werden können. Stattdessen ist ein kleines Symbol zur Unterscheidung der…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remixed the "Base_Card_Deck.stl" from 3D Printy my magic the Gathering deck. The box easily fits 100 sleeved cards plus sidedeck. I would use the “Support on build plate only” function of your slicer for printing these modells. Update:…
Wydruk około 10,39 €–12,70 € nettoWstępna wycena jednego wariantu
Print this knockbox in any material you want, I chose PETG. No Supports needed! I added a colour accent by layer-based colour change. I used a 20mm wooden dowel. I measured it with calipers, came out at 19.7mm, which I designed for. You…
Wydruk około 7,95 €–9,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For the perfect card storage I recommend the size "Base_Card_Deck.stl " for the box, you can fit a deck with 100 cards plus a sidedeck and sleeves loose in it, also I recommend the "Long Latch.stl " as latches, because it can be with the…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
A universal mount (wall thickness for boards up to max. 25mm) to fix dowel rods with a thickness of max. 30mm over two boards. Even the screws are printable. Therefore the dowel rod can be fixed within the mount and is secured against…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
I designed this model to work with @ubs_889675 wheel wall mounts to fit my Crankbrothers pedal as his pedal does not fit mine.
Wydruk około 11,92 €–14,57 € nettoWstępna wycena jednego wariantu
Die Kappe war verloren gegangen. Eine Unterlegscheibe und M6er Schraube hätten's auch getan, wär aber nicht so nice. Gedruckt mit PLA 15 % Infill
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Commercial use: Even if the license forbids this I agree if you show this model to your audience in a video etc. or use it if you run a business. Only selling the files or the physical model is prohibited. Please remember to name me as…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made a ACME replacement nut for a Hästens adjustable bed. It should also fits a Maxwell Kbed. Print the model solid otherwise it might not be strong enough.
Wydruk około 3,03 €–3,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Drawer shelf filling the gaps next to the handle tunnel at SKB Studio Flyer case 1SKB-iSF4U (it is too deep for iSF2U). The shelf narrows a bit correctly, otherwise it would not be possible to insert it into full depth (SKB apparently…
Wydruk około 5,84 €–7,14 € nettoWstępna wycena jednego wariantu
Garmin Varia mounting bracket for Kickbike disc brake scooter frames. This is a highly modified remix of Tim Angus' files for Garmin interface. Changed main interface body to adapt to Kickbike rear fork, modified inner tolerancies to snug…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Welcome, and thank you for choosing my model. I will provide some context for this model. I designed it because sometimes you forget your pencil case, but you still want to be able to count on having a few pens/ pencils in your binder.…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Having bought a workbench to place my printers it needed stabilizing. With this assembly the designated legs can be attached to the wall making it very sturdy. For my specific case a workbench leg has the following dimensions: 60.5 x 40.5…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Źródło oznaczyło ten model jako treść 18+.
Update - The Dowels have now been fixed! Added a 25% scaled up version! Looks elegant and details are more prominent! - Scaling up the model by 20-30% will look amazing! Lockheed Martin's Blackbird SR71 is one of my all time favourite…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by Me3D | Printables.com 🧡 Rate, 🟠like & comment — it helps keep the series growing. 🔧 Recommended Print Settings: • 🪶 Layer height: 0.16–0.2 mm • 📏 Line width: 0.35–0.45 mm • 🧠 Detect thin…
If you would like to download this, please do so from MakerWorld - https://makerworld.com/en/models/96340
Many parts of the Mini benchdrill are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. This design has an automatic start-stop feature…
This is my first go at designing a full size printed Crankbait. I think the finished model and results (fish caught) where well worth the effort. The bait is printed in two halves and then glued together. (I used super glue) Three small…
This model will require some supports between the legs, under the hands, zipper and the head as well. Add plenty of infill to keep it sturdy! I recommend getting the bottom plate for stability, but I have not been able to test this print…
CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…
:IMPORTANT THREAD / BOLT INFO: I had to scale the clamp bolts up in size about 1-2% and the bolts for the base about 3-5%. That's what worked for me and FOR MY LIKING - everybody's setup is different, your mileage will vary, everything…
StackBox is a clean, pocket-sized storage box with a sliding drawer and rail-based stackability. The bottom feet fit securely into the top grooves of another unit — no magnets, no fuss. The front faceplate is blank so you can personalize…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by Me3D | Printables.com Rate,🟠like, and comment, or the Bat-armor goes straight to eBay. 🔧 Recommended Print Settings: 🪶 Layer height: 0.16–0.2 mm 📏 Line width: 0.35–0.45 mm 🧠 Detect thin…
The legendary SR-71 Blackbird, now brought to you in Kit card form! The SR-71 Blackbird was a high altitude, stealth reconnaissance jet, capable of traveling at speeds of over mach 3. Operated by the United States Air Force between 1966…
I made this model, because i couldnt find any deckbox that fits all my needs, and thought id share it with you all. It holds 100+ sealable doublesleeved cards, with a seperate room for tokens, i believe itll hold about 20 sleeved tokens.…
This is version 2 of my Ultralight Crankbait. In this version I changed the shape a bit, added some gill details and it now uses preformed figure 8 hook hangers for tie on's. I used #0 stainless steel sinker eyes. You can get a 100 of…
Thank you for checking out my page! If you’d like to support my work, consider subscribing . As a member, you'll gain access to **all my designs** along with **commercial rights** to sell physical prints of them for as long as your…
Finally it's ready - my card box for Disney's new trading card game Lorcana! Thanks again to all who gave me feedback for the design and so the box now has the following features: - protects 60+ cards in sleeves and over 100 without…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by Me3D | Printables.com 🟠 Rate, like & comment ! if this creepy-cute gremlin is lurking on your desk pretending to be innocent. 🔧 Recommended Print Settings: • 🪶 Layer height: 0.16–0.2 mm…
(Summary consolidated/updated 01/15/23) This is a mini belt sander design intended primarily for sharpening knives though it may also be OK for some light duty grinding/jewelry making/polishing, etc.). It uses commonly available 3/4" x…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
Don't forget to like and comment. I want a joystick grip that looks cool and feels like it's the real deal. Voilà This joystick grip has been inspired by the original sidestick, which is installed in Airbus airliners. Based on this…
- Toy style two-piece dual color version of Lockheed Martin's Blackbird SR-71 and F-35. - Easy to resize, easy to print (no supports) and to be used as giveaway, toy, or design object - ideal with the small optional stand for a table. -…
This is just another Crankbait I made.. this one a redesign of a lure I carved out of balsa wood 25 years ago. I'm still working out the best infill settings so this is a* "Work in Progress" * for now. I did a short write up on my website…
Update 20240718: added HD version. Tips: It stands pretty well when printed with 20% or higher infill density! This is the fan art of Sharkboo from Zenless Zone Zero. The item is .stl files for the figure, designed for 3d printing. I…
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 This is a remix off of ChappIO 's really nice MTG Counters design. The following changes were made: Made the box 1mm overall thinner…
FERRIS WHEEL ORGANIZER. OFFICE ORGANIZER. FUN FOR ALL AGES!! SUPPORT YES! USES 385 GRAMS OF FILAMENT.
I like my homemade MFT, but I am tired of the parf dogbench clips. I liked Tamar's design for the 3d printed tracksaw hinge (linked below), but it is expensive (plus one needs to add international shipping). I decided to give it a try. My…
A 100% 3D-printed 7.23L custom one-off Mini ITX case sporting dual 4mm tempered glass side panels, a custom watercooling loop with a 45mm thick 3x80mm radiator, and a hand-built custom pico-psu. Project log on SFF Network:…
This is a new extension for Gravitrax, well I haven't seen it so far although its quite simple. Needed: - Neodym Supermagnet ⌀ 10 x 5 mm - ⌀ 3 mm Pin ( a toothpick will work as well ) Just put the parts together like in the Video (I have…
Use the drop-in T-nuts to mount different accessories to the Festool workbench MFT. The accessory will be firmly attached to the workbench. I made two different versions of the T-nuts, one threaded for M3 to M6 and the other for a nut or…
JERRARI3D.com The BlockBar Series is part of the GEN2 Decor series. The handles and knobs can mixed and matched with different faceplates to create a unique personalized storage solution that is completely 3D printable. Video…
Geschenkebox in Herzform mit "Happy Mothers Day" Beschriftung einmal in 20mm Höhe und einmal in 30mm Höhe If you like it ----> press like it :-)
This lure is my go at a 3d printed jerkbait which sadly are very rare to find on printables or thingiverse. I designed this off of the Westin Swim and gave it the same details. I would be very happy about some makes or even fish you…
A variation on my general commander deckbox design with but with a slot for a clear toploader. it will hold 100 double sleeved cards. Note: These parts have a nominal interlocking clearance of .10mm. This fit is intentionally a little…
The model is designed in 5 parts and no need support. There is a 0.2mm gap between the parts for them to fit together easily. Can be printed with a prusa mini+. ps : can be a card holder with a 50% size.
Required for assembly: 5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 5 mm eyes Super Glue…
Organize screws, bolts, nuts, electronic components, and small hardware with these 3D‑printable modular drawers , designed to be stackable and connectable using a dovetail sliding system on all sides. The design is compact, sturdy, and…
A knock box for discarding your used espresso pucks. I have been using for a over a year and it seems indestructible. Print the two parts and use some super glue to hold them together. Depending on your printer they might fit tight or…
Added a hole to hang it from a pegboard and negative text for identification.
A simple YuGiOh Deck Box that holds 55 cards(40 standard deck, 15 extra deck) sleeved in Japanese-sized sleeves.
This is a Magic: The Gathering commander deck box I designed for my girlfriend. It comfortably holds 100 single sleeved cards with some additional room for tokens. The top insert in the photos has the singer from Ghost on it but I've also…
Zur Befestigung von Steckdosenleisten an der Wand, Werkbank oder am Tisch habe ich diesen Halter erstellt. Der Halter kann für Mehrfachsteckerleisten mit Schalter verwendet werden. Benötigt werden zwei Halter für eine Leiste. Die Halter…
Jerkbait Fishing Lure Description: Discover the innovative Jerkbait fishing lure, specially designed for discerning anglers like you. This lure allows you to adjust the casting weight and balance individually – easily through the Bambu…
The Recreator3D.com –MK6 : FUN SIZE - a KB-3D.com Build Kit Experience - Turning PET1 Bottles into Filament! BUY A KIT HERE!!! 🚀 KB-3D's Impact on the MK6 Kits Since 3DPrintopia 2024 , KB-3D has helped take the Recreator3D MK6 from a DIY…
If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store . ____________________________________________________ ***FITS TUCKBOX (Walmart)…
I came across this model on Facebook and grabbed it off of Makerworld. Original author had a different set of cutouts. I filled back in the basic shape of the organizer and made specific cutouts for the tools that I had on hand.…
This is the Triton Sword, heavily inspired by the Pirates of the Carribean series. It is the weapon commonly favored by Blackbeard and is said to have magical properties. The sword is printed in several parts before being assembled with…
This set includes 7 different bench dog designs specifically created for 20 mm workbench systems (e.g. Wolfcraft-style tables). Originally designed for a specific bench, the collection evolved into a versatile set of shapes to cover a…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Usage The Backbone(r) enables Handy 2 owners to use the STANLEY® MAXSTEEL® Multi-Angle Vice without having to directly clamp to the hardware. 1/4 20 (12mm long) screws are used to connect the Handy 2 to the Backbone(r). Two models have…
This is a clear lip version of my Crankbait Fishing Lure . I used the included lip template to trace and cut a lip out of .093 clear lexan polycarbonate sheet. * I used #4 Treble Hooks and #3 Split Rings on these. * See Crankbait Fishing…
This deckbox is made of three main parts, which assemble by using 16 neodym magnets (6*3mm). UPDATE : Added some additional parts (window, top and front text panels), which can be glued (otherwise, you can try to paint the white parts of…
Just a fun mashup I slung together. Supports are needed for this model. Remixed from these two files: https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson https://www.thingiverse.com/thing:4575259 **This design…
If you have a 3D printer and decide you want to give bookbinding a go, here are a set of tools to get you started! Included are spacing guides for cutting your book cloth to size around our book boards (Also function as a straight edge,…
I made this double-stack slim deckbox because I found standard single-stack deckboxes to be too bulky and wouldn't fit in my bag (this also happens to fit in larger pockets). I've also seen very little love for the art cards that…
Don't forget to like and comment. Right-handed joystick grip that looks cool and feels like it's the real deal. Voilà! 12 buttons: 1 trigger, 1 pinkie switch 2x 5-way hat switches This joystick grip is inspired by the Knüppelgriff (stick…
