Keurig K-Supreme spacer
Keurig K-Supreme spacer to prevent coffee to splash out of your cup
Wydruk około 5,75 €–7,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 55
- Polubienia
- 5
- Ocena
- 0
145 modeli
Keurig K-Supreme spacer to prevent coffee to splash out of your cup
Wydruk około 5,75 €–7,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple Keurig K-Cup Holder - Holds up to 25 k-cups. Printed upright with tree supports.
There are lots of 3D printed Keurig cup holders, and this is mine. Wife requested a slim fit 8-cup holder. Base is 4.25 x 3 inches, and it stands about 8.5 inches tall. Printed at 0.28 w/ 20% infill. Category: Kitchen & Dining
Nice way to organize, layout and display K-cups. Tray holds 10 K-cup pods. Print instructions No supports needed Layout with bottom on bed, and rotated, so it sits on bed horizontally.
This is something I did in Fusion 360 a few years ago during the 2020 shutdown. I originally printed this on my Airwolf Axiom machine and was never really happy with the print quality, but have been using it ever since and the…
Keurig K-Cup Dispenser single, double or triple set
Model Advantages I had a high (eye-level) pull out drawer above our Keurig machine and needed a holder that was angled so we could see the coffees that were contained without my wife having to stand on her toes. But because the drawer…
This is an under counter coffee pod holder. I held it on with 1 inch wide double sided 3 inch tape. Holds 12 pods. Prints with no supports.
I have tried all the coffee extractors on thingiverse. All ultimately broke except the "Yes another coffee extractor but stronger" by buzzerco. The problem was the coffee often gets stuck because of the cross beams. I added some more…
Loading model in Prusa slicer you must reduce to 98 percent, orient bottom to build plate and rotate model 90 degrees. I have included a tested print file for mk2.5S that shows orientation to build plate as well.
If you use Keurig Cups, print this holder/dispenser to avoid fumbling for the immediate flavor that you desire. The dispenser features a last-in first-out storage. Or, cups may be removed from one side and inserted into the other side for…
This is a cup riser for the Keurig K-Supreme Plus single serve coffee maker. Normally cups sit too low and coffee splashes out of the mug as it brews. Moving the cup higher eliminates this mess. This riser sits in the drip tray and the…
NEW : remodeled to have tighter tolerances from feedback. Drawer and shell are now more snug. Includes optional profile to glue on after print to keep the machine from sliding off the shell when moving. K-Cup under the machine storage…
I got so tired of trying to tear the cardboard boxes right at the perforation so that it looked nice in the pantry. It never worked. I also have some coffee that comes in different-shaped boxes and it was killing my OCD So I modeled a bin…
It turns out K-Cups fit extremely well in the GEN2 drawers. Print multiple drawers that stack together to fit the right volume for all your K-Cup needs. _________________________________ This insert fits in the GEN2 Drawer Double -…
This is a remix of my previous modular coffee cups stand. I thickened the arms that hold the coffee cups after breaking a few of them off. Original: https://www.printables.com/model/1103572-modular-keurig-k-cups-coffee-pods-stand…
A Keurig K-Cup holder for 3 k-cups. Drop in K-cups thru the top and pull them from the bottom. Attaches to the side of your Keurig coffee maker. A K575 is used in the photo. There are indents on the mounting side for 3M gray double-sided…
I love fresh ground coffee, but getting the grinds into the K-cup without making a mess is a struggle. I made this Keurig K-Cup Coffee Grind Funnel to prevent that unnecessary mess. Printed on MK4 using Prusament PETG, 0.1mm layer height.
Two separate models that fit pretty well together. Posting them together in case anyone needs to replace both pieces. The drip tray is a low-profile version that allows for bigger cups.
Keurig K-Cup Stand Made for 8x22x7 bearings
This is a 3d model of keurig k-cup for fitting of other 3d models
Keurig K-Cup Rotating Stand for 15 pods Need two 8x22x7 bearings It is a long print, and I will upload it once finished :-)
Bored and hiding from a honey-do list, I decided to make something to organize our k-cups a bit better. So I bring you this, the 6 pod k-cup holder. It holds k-cups, but does absolutely nothing else unless you need a good back scratch.…
Do have one of those "use your own coffee" keurig adapters? This is the perfect scoop! Acts as a measuring scoop and a tapered funnel to get the coffee neatly into the filter. Enjoy!
Mug riser so it doesn't splash everywhere. Found others that didn't fit so I made one for this model.
Needed to replace a lost drip tray lid on my parent's Keurig coffee maker. Couldn't find a model that would work with their device, so I grabbed the measurements off another drip tray I had access to and modeled one out. I made a drip…
A simple replacement lid for the Keurig 2.0. It isn't an exact fit but very close. Print instructions Best printed solid. I made it around 3mm thick at printing at the thickness of the original didn't seem strong enough. Printed at .30mm…
This is a modular stand for Keurig K-Cups coffee pods. Each module contains 8 slots to fit 8 pods and can be stacked as high as needed! Each module spins individually and requires no additional hardware to assemble. Printing Instructions…
A vertical pod holder/dispenser. Holds 4 pods. I made it for a k-supreme plus model that has a metal side. It has magnet cut outs in the back to attach it. Could be used without the magnets. Be careful not to slide the magnets/holder…
A simple cover for the Keurig K-Mini drip tray. Print as oriented in the stl. Slightly reinforced in the middle so flipping the model will cause headaches. PLA not recommended due to hot water. Good bed adhesion helps.
This is a longer version of @Nottingham82's model, with screw mounting holes.
This is a cleaner for the refillable K cups. The cups I use are listed: https://www.amazon.com/gp/product/B00LHCCR92/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1 Place the cup full of coffee grinds over the three cleaner blades…
The K-Duo Plus has plenty of height to fit a tall travel mug. But regular-sized mugs are just too far down there which results in splashing and spattering. Thus this riser. There is a flat indexing tab on the back to make it easier to set…
Holds up to 6 coffee pods, connect multiple racks along either axis
1.5in or 40mm riser for the K-Elite Keurig machine. Attaches to the original base and tray to keep a factory finish. Reduces coffee splatter for less mess. Prints as oriented with no supports needed. PLA material at 0.2mm layers with 20%…
Keurig K-Mini drip tray (Steelers) 0.4 Nozzle 20% infill Layer height 0.2 Line Count 2 Top/Bottom layers 4 I Printed in PLA+
Print with no supports. Fits Keurig K-Express Essentials Machine
Just a little tamper and filter cup I designed for my Keurig re-useable k-cup
Print in spiral vase mode with perimeter extrusions 1.2mm or wider, as the usual skinny extrusions make flimsy walls. See Also Fast Print Profiles – specifically the “Fast Sturdy Spiral” ones Simple Ribbed Box – a similar box, less prone…
I finally broke my v1 version so I redesigned and made the extractor beefier and redid some of the geometry. Print with no supports. Mine is in PLA. 2 versions widemouth and standard mouth
This is an original design. If you use loose coffee grounds in your Keurig K-cup this cork screw can help remove the loose grounds quickly. I've been using this for years so its been thoroughly tested. The cork screw part is designed to…
Buzz, drip, splash. Ditch the last part with this, a handy screw-adjustable mug lifter that is able to bring most normal height coffee mugs close enough to the outlet of the Keurig Mini that your coffee won't splatter all over the place.…
A replacement drip tray that pairs with the replacement lid I made earlier, which can be found here: https://www.printables.com/model/1059320-keurig-k-express-essentials-k25-drip-tray-lid
Remixed the model from scratch to fit the original nutella lid that you just need to cut out with a craft knife or exacto.
Large bin can be stacked multiple times, shorter used on top. I use pair stacked on a cabinet shelf that about 8" tall. Lower bin holds 24 standard pods if neatly stacked, upper can hold 12 or more. I printed in PLA, any rigid material…
This handy gadget to helps tuck square cut filter material (of your choice) into your reusable K-cup pods for easy assembly and maximum filling. It saves a lot of mess cleaning out used coffee grounds. See pictures for the exact pod that…
This is a replacement drip tray platform (I'm sure this isn't the correct term, please forgive me ;D ) for a Keurig K-Supreme Plus coffee maker
Do you use a refillable Keurig pod, OEM or otherwise? Do you get tired of cleaning coffee grounds off the counter and floor because it's hard to funnel those delicious morsels into the small filter assembly? This scoop solves that…
This part is designed to work with a standard 11oz coffee mug, and has features in the bottom that lock it into place on the K-Mini so it doesn't slide around or get knocked over. These features may require some light sanding to get a…
This is a remix and improvement over my original drip tray for the Keurig K-Compact coffee maker. It can contain over 8 oz./235 ml of liquid. This should be printed in at least PETG, but ASA or ABS are strongly recommended. Supports on…
Spill coffee grounds when trying to fill that reusable K cup for your Keurig? Freshly ground beans deliver the perfect taste and aroma, but also litter your counter. Well say goodbye to mess and hello to the 3D printable funnel that's…
A taller (1.7" [43mm]) riser/drip-tray system. Designed for printing with a 0.6mm nozzle. Print Settings Rafts: No Supports: No Category: Kitchen & Dining
Holder for reusable My Kcup from Keurig. Allow easily switch between stock plastic for traditional kcup and Universal M
Simple design for hanging k-cups from some kind of rod, in my case wire shelves
This has storage for 10 pods (plus 2 secret) that fits in the Keurig K-Classic. You do not need support for this model. I printed with 20% lightning infill and 4 perimeters to save filament and it is plenty strong. I also included a non…
I was using the cardboard boxes that the KCups shipped in and wanted a better solution to keeping KCups in my kitchen cabinet. I modeled this size based on those containers. The 100mm version is the same width as those boxes, but has less…
My wife wanted something to hold her K-cups at work. This is a variation on the common theme found here and other sites. None that I saw were perfect, so I designed this, but it is certainly not all original. I've included the Fusion 360…
My Keurig coffee maker doesn't work well with standard size cups. The shelf is too low and when you make coffee it tends to splatter all over. This is because of the great distance between the nozzle and the cup. I designed a cup lifter…
support for short cups in the keurig machine
Just a replacement - nothing special We were missing the drip tray for our Keurig Compact coffee maker after it was stored for a while. I decided to design and make a simple replacement. The only supports that are needed are on the build…
A replacement for the drip tray cover. It fits a little snug, but works out well.
Custom Design K-cup holder Here is the 3D Design video so you can learn to build it yourself:
Just a quick insert I made up. I do one for every season for my wife and mother. Print Settings Printer: Flashforge Creator Pro Rafts: Doesn't Matter Supports: No Resolution: 200 Microns Infill: 100% Notes: Print at 100% for the strength…
The Keurig coffee machine is for some cups to big and it starts splashing around. Sometimes the cup needs to be elevated and thats the reason why I made a kinda riser for the cups. No coffee splash on the machine anymore. Print two or…
Two model files are provided: flat and sloped. The sloped one more closely matches the shape of the K-Mini water tank, but introduces layer lines. Printed in Elegoo Wood PLA Print as oriented in the stl
Carafe key requires a ½ x 1/8 round magnet to work print at 0.15 or 0.12 100% infill
The stand holds “bulk” ground coffee, K-cups, the refillable kind. Printed .2 layer height. Print upside down for no supports and a nice top finish depending on your build plate.
My parents exclusively use travel mugs on their Keurig so they had completely removed it and were using a napkin to soak up the drips. Designed and printed this low profile version for them. Unfortunately forgot to take an installed…
Riser for the Keurig K-Supreme to lift the coffee mug up and reduce splash from the brewing coffee. I printed in PETG to make it at least slightly more food-safe. Fits over existing drip-tray and includes holes in case of spillage. Print…
I was tired of the flimsy Keurig Milk frother lid, so I made a study replacement. This lid never comes into contact with the milk,, but you may want to seal it with food-safe resin, as I have. Step file included for your modding joy.
Three different files: one with Keurig on the face, one with Coffee, and one plain. I hope you like it; please enjoy. Holes in the back if you want to mount on the wall
Another version of a drip tray riser. With smaller mugs the Keurig splashes all over the place, this helps minimize that. Printed with PETG at .2mm layer, 5% infill.
I didn't find a print for the K-Iced coffee machine, so I modeled this part. This riser lifts your mug to prevent splashing. 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01
Wall-mountable holder for small 10 or 12 count Keurig K-cup boxes. A rear column and registration hole allows for easy spacing and alignment. Boxes are retained by a small lip on the front, but can be easily removed for replacement or…
Used on a Keurig K-Slim. Both the riser and the lid holder work with a yeti 10oz coffee mug (4 inch vertical). The lid holder and grate holder are just double sticky taped to the coffee maker walls. I made the Lid holder removable so it…
This is an original design. If you use loose coffee grounds in your Keurig K-cup machine this may be useful to you. I have been using this design for several years going through several iterations, and decided to publish this one. After…
We had some material from an old acrylic visor lying around, so I upcycled it into a splash guard for our Keurig K-Slim coffee maker. You can use pretty much any clear acrylic film for the splash guard. The groove for the acrylic is…
This Keurig pod tray was originally designed for use in the draw of an Ikea FÖRHÖJA
Simple splash-preventing accessory for the Keurig Supreme Plus that I designed two years ago and never uploaded here. Locks into place on top of the existing drip tray. Prints without supports or brim. Height can be adjusted by editing…
Holder for coffee stirrers that fits the Keurig K-Supreme. Could also be used for other utensils/objects. Should fit snugly over the body of the machine, but double-sided tape could be used to fully secure it. Printed in PETG for…
I was always frustrated with all the splashing and coffee drips everywhere that would happen on my Keurig b/c of the distance from the mug to the spout, since many are designed to accommodate tall thermoses. I made this simple riser to…
Keurig Coffee cup pod holder for your daily coffee.
I printed it with multiline 3 triangular infill and 0 top/bottom layers w 5 walls; the solid version. I uploaded a version with holes in case you don't feel like doing the work of modeling holes yourself. You can also use the original…
I wanted to make something to recycle our K cups and needed an original, unopened pod to start with. I looked around and didn't find any editable models, so I made one. Simple, straight forward, but you can edit it as you see fit. I was…
I created this model for the Keurig K-Duo, but will also work on other coffee makers. This eliminates coffee splashes during the brew cycle. Print the body, top and bottom then snap together. I designed two different bottoms to work with…
My wife loves her Keurig and she loves retro games so I made this 8 bit heart drip tray for her. Category: Kitchen & Dining
Keurig K-Express Essentials Mug Riser. You can use glue if needed. Snug fit, but easily taken apart for washing or cleaning.
I made this clip/bracket to hold the float valve so my Keurig can refill itself. Obviously this print won't refill your Keurig for you - but it WILL hold the float valve in place, at an angle so that the rising water can close the valve.…
Was sick of the large handle that comes with the Keurig as it always hit my cabinet top. Had to keep sliding it out to use it. Designed nicer levers to do the same thing! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Keurig Replacement Drip Tray – Honeycomb Edition Upgrade your Keurig coffee maker with this custom-designed, 3D-printable replacement drip tray. Whether your original tray is lost or damaged, or you just want a more modern aesthetic, this…
The wife and I frequently lose our grip on the shallow handle on our Keurig K-Duo Coffee Maker's water reservoir, sometimes dropping the lid right into the tank. I designed and printed a gripping tab to remove the problem. It's just large…
I like using a HyperChiller to make my iced coffee in my Keurig Supreme Plus. The chiller is too big to fit under the brewer with the standard cup platform installed. If you pull the platform out, the chiller will fit but the platform…
I used sugru to attach the bracket to the side of our Keurig machine. Holds 5 Kcups. Enjoy!
I prefer grinding my own coffee beans, so I keep a couple of the reusable My K-Cup filters with my coffee maker. I didn't have a good place to store my filters between brews or while they dry. I eventually decided to design a small stand…
For those that like the convenience of the Keurig, but prefer their own coffee, the reusable filters can be a hassle to empty. I've seen some versions that auger or bore out the grounds, but that puts a lot of strain on the filter mesh.…
This is a direct scan of a Keurig K155 water reservoir lid. I printed it in PETG with PLA supports. The scan isn't perfect but it fits nearly as well as the original. I have included the original SolidWorks file.
95mm diameter x 40mm high cup riser made in Tinkercad using its snowflake pattern as an inset to catch drips. I used four small stick on feet to keep it from sliding around. PLA, 0.2 layer height, 10% infill. Wasn't thinking, I used white…
Lengtheneded the handle from the original model
Our Keurig coffee maker splatters when filling a coffee mug. This model is used to raise the cup up closer to the pod output, which reduces the amount of coffee droplets splashing out on the counter. The coasters are printed with a hole…
This is a simple storage insert to keep the k cups right with the coffee maker. Recommended Print Settings: Spiral Vase mode and all other default settings. If you aren't going to print vase mode, the best approach is: Top Layers = 0…