318 modeli
My interpretation of Skippy, the AI assistant of the Iconic variant of the Arasaka HJKE-11 Yukimura in Cyberpunk 2077
Wydruk około 11,15 €–13,63 € nettoWstępna wycena jednego wariantu
For Joysways Dragonfly /HK Skipper. This is glued into the bottom of the hull with the back aligned with the step. The actual foil can be clipped in and out, and is held in with two 4M dome head cap screws. There is a hole in from the…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
Wall Holder for Cordless Screwdriver Set In 4 different Variants. With logo for WORX, KS-Tools and Kiprim as Well, without LOGO. Happy Printing… Set on Picture: KS-Tools 515.3699 Printed on: Original MK3S+ Filament: NOYES PLA Grey
Wydruk około 14,45 €–17,66 € nettoWstępna wycena jednego wariantu
Handles for skipping rope hexagon The ball bearings on the handles of the skipping rope were rusty. Doubbel unders are no longer suitable for fast rope jumping. The 2.5mm thick rope can still be used. So decided to construckt a handle…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Sunglasses broke in the center of the nose bridge. I scanned and created this as a splint to repair them. Printed in ASA. Front up printing orientation recommended. Supports required.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Mudskipper
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Regal has partnered with Markiplier's Iron Lung movie, to provide fans the ability to print their own collectible popcorn container. Working with Iron Lung's creature creator, Molly Brown (@deadlymelodic), Regal's Prop Shop team created…
I took a game model and posed it in blender. Supports are a pain, and the hat is really thin. BE CAREFUL. I think I used 30 or 40 percent infill. Enough to be solid on thin parts but not ridiculous. There are some modeling errors, but…
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…
Here ist my Box für Skipbo Cards based on “Rugged Box” by Whity. I used the inner box from “UNO Card Box” by Markus_p. You need the inner box 2 times. Use 6 M3x30mm cap screws to assemble the box.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I didn't like the existing models, so I designed my own. You…
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- This tool was designed to make the bed leveling easier and safer for Creality K1 and K1 Max 3D printers. It's made…
I present a full size replica of the pistol from cyberpunk 2077 with a lots of details. It has a detchable magazine attached to magnets All parts should fit in a regular 220x220 mm 3d printer Print Settings Printer Brand: Creality…
In honour of Pokemon Go's Mudkip Community day (July 21st) I have knocked up a Mudkip one piece and multi-material model Totally needs supports Print instructions Category: Creatures
Your kids will know this. from a youtube meme type thing.. please share your makes.
This model was designed to solve the age old problem of messy Skip-Bo games. While many card trays are already available to download, none of them seem to have thought about storage or transport of the cards, meaning you'd have to store…
Verhindert das zu und Aufschlagen von Fenstern oder Türen, die in Kipp Position stehen. Am Wochenende war der Wind so ungünstig, dass meine Terrassentüer, die auf Kipp stand immer auf und zu geschlagen hat. Darum habe ich diesen…
This is a remex of the Skip-Bo Card Box from Markus_p (Thank you very much for providing your model data!!). I had the problem that not all cards are inside of the inner box and I wanted to put the instructions in the box. So I made a 5mm…
I remixed the top part of this design, I tinkered some Skip-Bo elements and 2 pairs of recesses on top and on the sides for better handling to it. The locking tabs of the bottom part are modified slightly. The bottom was really a tight…
Hochkippschaufel für die Bruderfrontlader Aufnahme. Prototyp für manuellen Betrieb, keine RC Funktion in dem Modell Verfügbar. würde mich über ein Feedback freuen.
I call this the Skippy Oak boomerang because it has kinked wings like the Janetzki Brothers' Skippy, and because one specimen I have made of wood consists of oak scraps. Should fly a nice midrange circle. Throw rather low and with a bit…
Only thing I forgot to add was little nostrils. Feel free to add them yourselves in bambu studio. I think it looks okay with them.
UPDATE: 1/6/26 Added a scaled top for a better fit with newer printers. Added complete top with top and letters that can easily be colored in slicer for Multiple Material Prints Skip-Bo Card Box - This box is designed to print without…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Der 3D-gedruckte Abluftadapter für den xTool M1 Ultra ist eine spezialisierte Lösung, um den Abluftschlauch durch den Spalt eines gekippten Fensters zu führen. Der Adapter wandelt den runden Anschluss des Abluftschlauchs in einen flachen,…
This is a remix of dergogo's original box. The bottom part is as dergogo's original design. I modified the top lid with the following additional features: Added finger cutouts so that you can access the locking tabs more easily if they…
So the anycubic kobra s1 bed comes terribly leveled out of the box lot of times. This simple tools helps manually level all there bed point ( front left and right and back middle) where frame is connected to z motion system by the way of…
Based on the original model of JuL. I made a box to hold the SkipBo card deck. Since the orignal design had the wrong logo I replaced it with one from the web. I used a logo from the internet to add the specific touch. The original…
This Skip-Bo Card Rack is an essential center piece to help keep your game night on track! It features a unique Vonoroi pattern in the center that shifts depending on your viewing angle! To create the model that I photographed, I used the…
The Pal with the goofiest face. This is Chikipi from the new video game PalWorld. I recommend 0.08mm layer height and tree supports. Enjoy!
Klimaschlauch Adapter 160 mm für gekippte Fenster Praktischer Adapter für mobile Klimaanlagen mit 160 mm Abluftschlauch
This is a 1:16 model for 45 mm track of a standard German 600 mm, 1 cbm Muldenkipper without brakes according to DIN5963. Axles: standard LGB axles running in MR63ZZ bearings (3.0x6.5x2.5 mm) The bearing holders are fixed to the frame…
My take to the pokemon Mudkip in low poly fashion. The 1 piece version will probably need support for the whiskers. Don't think it will need infill. There is a split version where whiskers print apart and then you can glue them. It's the…
Remixed the Monster8 DIN mount from Clee to accept the wider footprint of the MKS Skipr. Uses 4 heatserts (M3x4x5)
This remix features a SkipBo logo more suited for multi-color 3D printers. I have also included a fixed version of the No-Logo lid. Better for placing custom SVGs on to.
Inserted the letters for multi color printing
I always had a soft spot for boomerangs with extra kinks in their wings, such as the Janetzi brothers' "Skippy" . So here's my take on that idea. As always, if the boomerang flies to low, just add a little dihedral, i.e., bend the…
I used to have a toy called a skip disc but it eventually fell apart, so I designed my own version, the Skipbee. It is kind of like an upside down frisbee. Print flat side down in TPU or some other flexible with only 2 perimeters so that…
This is a 1:16 model for 45 mm track of a standard German 600 mm, 1 cbm Muldenkipper with handbrake according to DIN5963 Axles: standard LGB axles running in MR63ZZ bearings (3.0x6.5x2.5 mm) The bearing holders are fixed to the frame with…
Skips from the Regular Show
A resizing of the Iron lung popcorn bucket for soda cans. All credit goes to original creators.
This multi-color 3D printed box is designed specifically for storing Skip-Bo cards, combining practicality with a touch of nostalgia. It features a retro-style "Skip-Bo" logo, adding vintage charm to your card game collection. The box has…
I've designed a ski pole mount compatible with my Insta360 invisible selfie stick. i used TPU inlays. Let me know if you prefer a version without. Additionally, you can adjust the diameter by modifying the .step file. the stl is for…
This case holds a full Skip-Bo card deck. After the first print I noticed the case was just too small to hold the card deck uncompressed (as you can see in the picture). I added 2 mm to the model, but was too lazy for a reprint of my own.…
Object Description: This SkipBo box is easy to open and close. But the closing mechanism reliably keeps the box closed. The box also offers old, thicker cards enough space. The hinge-pins are designed to have a slight press-fit. This…
Painted with four colors: Black, Blood Red, Bone, Lighter Red.
ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: Classic Detect thin walls: - Brim: No! BuildPlate: - Info‼: Do not scale the Mudskipper any…
Ersatzteile Kippschere für Kellerfenster ähnlich MEA 41 A 290 und 41 A 291 Spare parts for basement windows similar to MEA 41 A 290 und 41 A 291 2026-08-12: Revision 001 mit bespiegelter Führungsnut ergänzt. Nur CAD Modell geändert, nicht…
Requested by someone, you can make all these changes and your own remix by using the original files and changing up the specifications (per instructions) in FREE* onshape account.
I'm so tired of klipper over heating, so I make this model. you can use "fan generic" in klipper to controll the 5010 turbo fan if it is too noisy.
This is a for the SKIP-BO card game. The lower part of the box is a very simple print. No supports or anything special. The lid is printrd facing up and requires supports to allow for the color changes that form the logo. The included…
Print from PETG or ABS/ASA or other higher temp filament who can survive 80c, but not PLA. Back plate can use studs or just glue. Im include step file to future edit if need.
This a model of a typical German rowing boat . It is intended as a model on a RC boat. You can downsize it to about 4cm. The platforms are from mahonie wood veneer and cut with a laser engraver.
Steam locos need coal. This skip truck is an add-on to your coaling station and is used to replenish the steam locomotive's coal reservoir. You need also 2 H0 gauge axles which fit to the small tracks of the coaling station. I used…
This cute kangaroo card is a perfect gift from the land down under! It's a quick little print and simply slots together after the pieces have been cut loose. Print instructions The card is designed to be printed at a 0.2 mm layer height.…
I wanted to 3D model another thing from the movie Iron Lung by Markiplier. And the SM-13 seemed to be a good second choice. I had alot of fun making the texture of submarine with all the metal plate "patches" and fish-like features of…
MKS SKIPR case for printers built with 3030 extrusion.
If you've even played Skipbo, the card situation can get out of hand. This is an organizer and a storage solution for your cards. Design features include slots to easily remove the piles when they're complete. Grooves for rubber bands to…
Remix of the Rugged Box (Parametric) from Whity
Description Skipper—Barbie’s adventurous younger sister—has always had her own playful, modern sense of style. These heeled sandals are designed specifically for the modern Skipper doll foot, giving her a fashionable accessory that works…
Cookiecutter for 5x “Vanillekipferl” Onshape: https://cad.onshape.com/documents/b4b8dffa1d6271a7f0230799/w/b8f5b23d53fd90cfd7752206/e/191f8b9cbb65d791594cac79 Like the model? Consider saying thank you by buying me a coffee:
3Dsets Skippy Boats ESC switch holder for QuicRun WP 16BL30 req. 3x M2x6 socked head screw 10.11. 2023 - added holder WP 16BL120
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Re-design of the inner box to have the additional chamfer and marking on the narrow side so that the lid can close without catching on it. Everything set up ready to print in the 3mf (import as project), just change the printer and the…
My grandfather used to make something similar using wood. While I would love to do the same, I don't have the expansive wood shop that he did, so I took a more modern route and designed this model to accomplish the same thing. Print 1…
Designed this to help my friend's OCD on constantly adjusting the piles as we play. I decided to create a smaller version that can be printed in a smaller foot print
Ja moin, Hier ist ein Spielbrett für Skip-Bo, das etwas von den originalen Spielregeln abweicht. In der Mitte befindet sich der übliche Kartenstapel und rechts sowie links jeweils zwei Ablagestapel. Im Gegensatz zum Original sind die…
Here's a multicolored Mudkip design I made that's featured to have an 8mm neodymium magnet inserted so you can display it on your fridge. Here's a link to the magnets if you want to ensure you have the right one:…
Simple Skip-Bo storage box with embossed lid. No AMS required. 🖨 Printing: (This is all taken care of in the provided 3MF file) Print the lid and the box separately to avoid a slight layer shift due to the lid finishing earlier than the…
Hi 3D printing friends! This is a ball joint that fits the Skip Hop Baby Backseat Car Mirror. The ball is larger and more sturdy than the one that comes with the mirror, and has the ability to tighten and clamp down on the ball so it…
Salut, Voici une boite de rangement pour les cartes du jeu Skip.Bo. Les cartes font 87mm x 56mm
So I herd u liek mudkipz? I included 3 files: A low-poly mudkip, which has a lower quality to download faster, A 'smooth' mudkip, which has higher quality, but still lacks small features like eyes, and a high-poly mudkip, which is the…
Wikipedia 3D Logo, 10 cm diameter (STL file) Printing Using supports Any filament (PLA, PETG…) Colours should respect the Wikipedia guidelines
Pixel Art Magnet of the Mudkip Pokemon. Sprite adapted from the PMDCollab project (Chunsoft) to keep 3 colors : https://sprites.pmdcollab.org/#/ Dimensions : Standard : 45x50x7mm Large : 90x100x7mm Printing Tips : Model is 7 mm high. When…
A more powerfull 3 bladed Prop for 3D Sets Skippy
Kryt na desku MKS Skipr pro Ender 3 max. Jsou dvě verze boxu. Jedna pripravená na vlození mosazných matek (M3) a jedna na vruty. Na vkryt lze nainstalovat 3 kusy ventilátory 4010 Vzhledem k hloubce boxu je potřeba zvýsit tiskárnu…
As said in the summary this is a remix of the provided CAD model, I will be using this with parts from “Pico Neo 3 Link Grips for Gunstock” by MadwOrschtX on Thingiverse (https://www.thingiverse.com/thing:5449666) and “Reverb G2…
Needed a good universal motherboard tray to suit the Makerbase MKS-SKIPR board along with their new UTC CANBUS board. Print from anything you like, but I would avoid PLA unless the environment is cool, otherwise, ABS at a minimum, You can…
You can replace the stock QIDI mainboard with a Makerbase SKIPR using this mounting plate. There is also a bracket to install three 40x40 cooling fan. The MKS-SKIPR can be installed horizontally or vertically as you prefer. Tested on my…
This is version 2 of my custom electrical wire fastener/clip. I've added a countersink to support an additional type of screw while leaving a large flat area for the ¾" #8 lath screws I'm using. The large flat head screws are ideal for…
Yet another key holder, only with a bit of a Fallout twist :) Print out a few of each of the thin spacers to go between the keys. The ones with flanges are designed to fit keys with larger holes than 3-4 mm. Use them to reduce the ability…
This is a slightly modified version of this design . I changed around the angles of the wingtips and distorted the elbow slightly. The intention was to make the boomerang fly a little bit higher, which seems to have worked.
All the parts are new, so no recycling of other prints. This die and inserts can be printed without a multi material unit. I tried to make a die that was easy to print with multiple colors without a multi material unit. Size of the die is…
for MK4 users , keep the speed down and without input shaper increase Temp. a bit for better layer adhesion printed wit Prusament PLA
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Skiploom, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
Chikipi from Palworld, I recommend using 0.08mm layer height and tree supports. Enjoy!
Hallo zusammen, Das ist das jetzt ein Exklusivmodell: https://makerworld.com/de/models/2088558-hsw-honey-comb-stoage-wall-infinity-kippbox-v2#profileId-2257498 die letzten Tage habe ich intensiv an dieser Box gearbeitet und zahlreiche…
How to print (in accordance with #3DBenchy license): - Open your Prusa Slicer - Import the Benchy and the Rabbit (with custom support for one ear) - enable supports «For support enforcers only» - Merge them - Delete the helper_disk…
Es handelt sich um einen Nachbau einer Kippschere mit der Kennung "48 A 59". Sie wurde abweichend vom Orginal um die letzte Einrastung eingekürzt. Die Kippschere verhindert allgemein, dass das Fenster beim Öffnen aus dem Rahmen fällt und…
This is a box used to store playing cards. The lid/hing part is a print-in-place part. The hing is then glued to the box (I just used crazy glue). The SkipBo part is a multi part file, just in case you have a multi filament printer.
Custom popcorn bucket *ALL CREDIT TO REGAL MOVIES*
Skipper for a rc-boat scale 1:20 ( Like Amsterdammer , made by Rene76) You can scale it for the model you use.
Starting my journey into 3D printing coming from a VFX background. I decided to work on something with a relatively simple shape, complex textures and some usefulness. After a rewatch of Star Wars Ep4 - The Lars homestead stood out.…
SkipBo - Box + Lid with specific hole to see the name of the game
Couldn't find a spool roller that fits this specific container so I made one myself. Uses the following hardware: 2 x F688 ZZ bearings 1 x PC4-M6 pneumatic connector (for the bowden tube) I just used some hot glue to attach the bowden…
