1282 modeli
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
Wydruk około 10,75 €–13,14 € nettoWstępna wycena jednego wariantu
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Wydruk około 5,42 €–6,63 € nettoWstępna wycena jednego wariantu
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
Wydruk około 11,95 €–14,61 € nettoWstępna wycena jednego wariantu
This is a collapsing sword designed to be printed as one part. Its only 140mm high when printed but expands to over 860mm in total length! This version of the Jian prints complete all as one part. The Replaceable Blade Version is…
Wydruk około 13,56 €–16,58 € nettoWstępna wycena jednego wariantu
This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
Wydruk około 4,78 €–5,84 € nettoWstępna wycena jednego wariantu
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
This is a collapsible hand fan where the blades interlock in a way that they can't over extend or pass through their collapsed state. Just take care not to break the tabs, especially with brittle materials. They can break when extending…
Wydruk około 2,41 €–2,95 € nettoWstępna wycena jednego wariantu
!!! REPAIRED FLYING PARTS !!! CZ/SK Jedná se o model trojplošného letadla Fokker Dr.1. Jde o méně náročný model na složení. K dispozici jsou nové klapky (Flaps), při tisku buďte pozorní které soubory používáte (jsou označeny vždy buď OLD…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
Wydruk około 9,43 €–11,53 € nettoWstępna wycena jednego wariantu
A remix of 3D Printing World 's Collapsing Katana except I removed the robot logo on the bottom of the katana.
Wydruk około 7,89 €–9,64 € nettoWstępna wycena jednego wariantu
Collapsing Jian This is a collapsing Jian, which is a type of Chinese sword. It's a "Print in Place" design that is only 200mm tall when printed but extends to over 800mm long The Replaceable Blade Version is available to my Clubs…
Wydruk około 11,19 €–13,68 € nettoWstępna wycena jednego wariantu
Land Ho! Sail the seas with the help of your Print-In-Place Collapsing Pirate Spyglass! This telescoping spyglass expands to almost 400mm! Print Settings No special settings are required. If you would like to make a 2 color version, you…
Wydruk około 11,09 €–13,55 € nettoWstępna wycena jednego wariantu
Collapsible / Rotatable Clothes Hanger (Print in Place) This collapsible / rotatable clothes hanger weighs little, is easy to store and is perfect for on the go. The rotation locks into the open and closed positions with a loose fit. If…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
So I decided to continue (re)mixing CaseStudyno8´s designs (https://www.thingiverse.com/thing:1866782) and 3DPRINTINGWORLD´s ideas (https://www.thingiverse.com/thing:3606120) to create my own Yoda's collapsing lightsaber. So again I…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A lot of child, a lot of doll but only one Pacifier… a receipt for a disaster :-) Now there is no problem as they now have anough Pacifier for everyone… but I know… they'll find something else now :-P Easy to print and kids love them.…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…
Wydruk około 20,05 €–24,51 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have a Collapsible, retractable dagger for you. It works nicely, you can even hit it and it won't break! It's nicely made and the blade comes out really easily. It prints…
Wydruk około 5,00 €–6,11 € nettoWstępna wycena jednego wariantu
Here's my super long lightsaber, like to print it. Supports are not required, for best results use a 4mm nozzle. The katana is about 40 inches/102cm long in total and the handle is about 7.8 inches/20cm long. Have fun printing.
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Collapsible Phone Stand (Print in Place) Collapsible designed phone stand to safe space. Lenght 120 mm Width 60 mm Model printed with: Prusament PETG lipstick red
Wydruk około 1,33 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love having a dice tower to roll my dice, but I have not found one that is easily portable. So, I made one that is not only as small as a soda can (width wise) but is also my first print in place model. The base is able to be snapped…
Wydruk około 5,77 €–7,05 € nettoWstępna wycena jednego wariantu
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wargame Walls Collapsed Pipes Section 17 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Wydruk około 7,63 €–9,32 € nettoWstępna wycena jednego wariantu
49mm lens cap with flaps for easy screw and unscrew.
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Edited dimensions to match traditional hanger.
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
* No screws, glue, or any hardware required * revision note 09-07-2024: “the master printer update” The current version can be fastened by a flange locking screw in the bottom of the pawn. The base stayed the same. Stay tuned for the pip…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
I created this collapsible Base so that i can first get out of my simrig and second that the Virpil Sticks are not in my eyesight when i play racing games. Apart from the print you will need 4x M6x20mm Screws 4x M6 Brass Inserts 4x…
Wydruk około 8,39 €–10,25 € nettoWstępna wycena jednego wariantu
This earring stand prints with a telescoping tower that is extends to 72.5 mm (overall height is 85mm extended) and collapses to 22 mm. Attach the interchangeable earring top (or something of your own design) to the 3.0 mm x 3.0 mm square…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
44mm diameter and 44 height
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The two vases have a 1 mm clearance. I vase-mode printed hexagons to fit together and bounce up and down using magnets. They offer an interesting fidget / conversation piece. Making them in different colors adds a bit. The 1.25" magnets…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
made for my son, PLA, with two 3x16 screws and M3 nuts and superglue, use dense infill if you expect some abuse i have to reprint right joint soon after first use so added its separate file too, its mirrored in slicer Let me know if you…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
I designed these based on Rumen Chakarov's FokkeRC Bf 109G-6 wood kit. I intend to use a glued carbon fiber pulltrusion rod for a hinge. WARNING!!!! I HAVE NOT FLOWN THESE YET. THESE ARE PLA PROTOTYPES! Now that that's out of the way, I'm…
Wydruk około 24,39 €–29,81 € nettoWstępna wycena jednego wariantu
Collapsible Colander Organizer allows you to set a collapsible Colander upright to save room in a pull out drawer.
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
With this piece you can use any headset with a button and use it as a photo trigger for timelapse. Adapted for Ender3 V2
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically. There is a new “clearance” test print, you can find here…
This version of the Master Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Collapsible Basket Optimized for 3D printing This basket prints in place as one part and doesn’t require any supports. It prints flat but folds it into a basket! This is a remix of the first collapsing basket I designed, that version uses…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. Prints without supports, but you will…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Want the same results? Click here to find the filament I use for results like these. This super satisfying fidget can be customized to be any shape or size with the simple adjustment of a number! I have added 9 sizes that are ready for…
katana s desingem Naruto
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
Original Model by Mr_Andre https://**********.com/en/models/1033319-stainless-katana-sword-print-in-place#profileId-1016589 Design Concept This red column features a unique stackable design that can serve as an intriguing display piece or…
je potřeba prolomit první vrstvu u čepele
Bonjour, Voici une épée dépliable, un projet qui m'a beaucoup amusé ! ATTENTION : Vous ne pouvez pas vendre ni le modèle imprimé ni les fichiers numériques ! Pour une licence commerciale merci de me contacter par mail à…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This collapsing Spear is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This is an evolution of my original Collapsible Katana design with a some improvements: The kissaki is now included as part of the innermost sword section, which means no assembly is required to print it. This results in a much cleaner…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This tower was created by aclugston519 from thingiverse. The thin walled version did not work for me so this is the thick walled version. It printed perfectly as is with the exception of painted supports for the top piece. See…
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Das Katana ist insgesamt ca. 910mm Lang und der Griff ist ca. 210cm hoch. Wenn ihnen das Modell gefällt bitte nominieren. Veröffentlichen, verteilen,…
This is a collapsible sword that is similar to other models that can be found on this site. Choose between two different designs, a sword or lightsaber. Everything can be printed without support. The size is more aimed at children, but…
This collapsing Archangel Blade is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This is a 10:1 scale of a Lego lightsaber with a collapsing blade. This version prints complete all as one piece. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm…
This version of the single edge curved blade collapsing katana prints in place all as one part. The Replaceable Blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
Fish with collapsing sword inside. You can use 8x2mm magnets for head attachment. I recommend printing it from petg for better durability. Happy printing!
This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
inspired by the popular ones, i made this myself because i want to sell them. make sure your settings are perfect.
katana s desingem the witcher na hraní či na dekoraci
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
🎄⭐ Print as is, no supports and layer-height .15mm (the lower, the better, as it results in more stable overhangs. More than .3mm and model will not slice correctly), 100% infill. Also you might need to slow down your speed as this model…
The model can still be print in place and print the cap separately. For those having difficulty printing the blades in place these can be printed separately too, just printing the broken section.
A smaller Collapsible Light Saber with twist lock blade retainer. Easier to print, 180mm extends to 900mm New blade design extends to a consistent length and blades can be fitted if they're not perfect. !! Important: !! Blade models are…
This is my silliest design yet, but fun to play with anyways :-) It is a collapsible sword (or lightsaber, or magic wand), that is small enough to fit in a pocket. After printing, inset the 5 parts of the blade into the hilt and close it…
Collapsible Christmas Tree Fidget Toy Looking for a fun, interactive, and festive addition to your holiday season? This 3D printable Collapsible Christmas Tree Fidget Toy combines the joy of Christmas with the satisfaction of a fidget toy.
This collapsing sword is designed to be printed as one part. The multi-part and the replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
collapsing sword inspired by "3d printing world". you can print the blade separately and slide it in the back.
After some friendly suggestions, I am leaving a ko-fi link here for anyone who wishes to support me, no expectations: https://ko-fi.com/feetoffthetable ***Edit*** - added a flattened point version for anyone who doesn't want a sharp…
Core One Exhaust Vent Flaps (Gravity-Closing) This is a remix of an existing Core One exhaust vent flap design (found here) , using a dryer-style gravity flap mechanism to help retain chamber heat when the exhaust fans are off. The flaps…
This print is used to gauge your success when printings a print-in-place collapsing sword or lightsaber. Each ring has a different amount of clearance. How many rings are free after printing will tell you what clearance your printer is…
In the leaf model, you need to change the color at about 6mm height to look cool. 잎사귀 모델 출력시 6mm 높이에서 초록색으로 바꿔주면 더 좋습니다
katana bez loga
This sword is designed to be printed all as one part. This is my take on a collapsing William Wallace’s Scottish Claymore. Not only is it ridiculously large but I also added another blade segment so it extends even farther. Its prints at…
I've reworked this design, which I think is brilliant, so that it fits on the mini's bed. I've kept the same specifications as the original model (mechanical spacing and thicknesses) . I added a few fillets and lightened the final piece a…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing 2023-06-09 - Fixed the 1x3x6u, 7u, and 8u bins. The stabilizer “X” were done wrong. 2023-02-04 - Original post using the Gridfinity v5 spec Also…
This is the second version of my previous collapsible Christmas tree design. The first version can be found here: https://www.thingiverse.com/thing:4675040. There are two versions of this Christmas tree: one using the 5-point star as the…
Travel phone stand, lightweight, foldable. Low filament need(cca 11-13m). Radius (A,B,C,D,E,F) and Edge (G,H,I,J,K,L) versions. Size 130(high)x65(width)x90 (A,B,C,G,H,I) 130X70X90 (D,E,F,J,K,L) Hole for cable 4.9mm. Edge versions…
This version of the Rey’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. External supports are not required but there are some built in supports for the on/off…
Printed this on a Sovol SV06 without too many issues. I had stringing between the blade segments so watch out for that. This would be pretty easy to modify for print-in-place, but I wanted to print the blade in a different color. The…
Keep your beverage well above the sand and dirt with this collapsible cup holder spike. The pointy end presses easily into sand or soft earth. Each section has a screw thread at the end so that as you extend each inner section, it can be…
Someone requested a customizable collapsible sword - and here is my take on that topic. I decided to print a wand, but you can choose a more sword-like shape. Collapsed length, number and thickness of segments - your choice also affects…
Straight out Hazbin Hotel, m eet Alastor, the enigmatic “Radio Demon”, known for his powerful sorcery and status as one of Hell’s most feared overlords. Once a notorious radio host and serial killer, Alastor’s transition to the afterlife…
Model Crates are great! They're even better if they're miniature, collapsible and stackable! This is a simple print that goes together without any hardware and can hold all of your little bits and pieces on your desk or workbench. Build…
Print in Place Folding Hanger Designed to fit on smaller machines while being sturdy enough for most clothing items. Changelog : 11/12/21 Release 11/14/21 Update: Curved files have been added. 3/8/25 Update: Removed confusing files,…
This collapsing sword is designed to be printed as one part. The replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Deadpool Collapsing Katana (Print in Place)
This is STILL A WORK IN PROGRESS. This is a remix of the amazing model created by Polymath314 on Thingiverse. I've also linked the 2 collapsing darksaber models that inspired me. Altho This is NOT technically a remix of either of those…
This version of Yoda’s lightsaber prints in one piece except for the front guard which is printed separately and glued The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm…
This Frozen themed Wand i desinged as a Birthdayparty giveaway, comes in three pices to ensure all funktionality and the ability to be more colorfull. I did a little hack when slicing the Stick-Model. I set a Hight Range Modifier from the…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This version of the Obi-Wan’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. External supports are not required but there are some built in supports for the buttons,…
This is my Collapsible Dice Tower. It collapses to half a page size (200mm x 150mm), 12mm thick. For gaming no assembly, no magnets no clips are needed to make it ready to go. Some materials are needed additionally to the files provided…
Mosquitos…. They always bite in the wrong places. Here is my answer on how to scratch the back of your body when those tiny bloodsuckers find a way to get to you. Replaceable Heads This was printed with Fusion the threaded hole has the…
