Liczymy pasujące modele…
Hello, This is my contribution to a 3D printable leather wet molding system. I took a lot of the design queues from the readily purchasable www.BuckleGuy.com wet molds, but they didn't offer the sizes and variety I wanted. I'm a better 3D…
This is a high-resolution roller for putting a realistic leather/animal hide texture on clay. When printed, it's 14cm tall and produces life-scale leather texture, so it can be scaled down for smaller-scale leather.
This is a Remix of Comfortable Leatherman Wave belt holster by WaveSupportApparatus. Mostly the changes are of a cosmetic nature i.e. I've tarted it up a bit by rounding some of the hard edges. I've also engraved the words " Leatherman…
Wet mold your 2-3oz leather around the lighter and let it dry over night. Then glue/stitch around.
This is 3D printed version of classic adjustable leather strap cutter. The maximum leather thickness is around 5.5mm. You will also need following hardware: 9mm blade 3pcs M3 nuts 3pcs M3x15 screw 1pc M3x20 screw 1pc M6 nut 1pc M6x30 screw
A little toothpick which slots in the pocket clip slot of the leatherman tools such as the wave, charge or surge. Print in layer thickness between 0.1 and 0.2mm for the best results use thinner layers. Use more than 3 walls so it will be…
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…
This is the printable version of a Leatherback Sea Turtle I created for the Digital Life 3D Project . I test printed this model on my Ender 3 and now working on painting it. The main piece prints best with the head pointed upwards and the…
Here is a nice cozy well-loved leather couch. It's like the one we all had growing up that was nice and broken in to the perfect level of comfortable. Recommended print settings Layer Height: 0.2mm or less No supports needed This is a…
This is a tool to help you find the centre line of a leather strap or belt, and then mark holes at an even spacing along that centre line. Ideal for making clean and professional looking belts, straps for harnesses or other tack. The…
Ever find it difficult to punch stitch holes in leather? Or afraid that you make too much noise hammering your fork punch and disturb your neighbours? PRESSLY can help! Using its arbour press style rack-and-pinion mechanism, you can…
A set of two patterns used to cut nice end for belts and other leather pieces. The base width of the models is 20mm but it can be adjusted in any way you want in the slicer. A small organizer is also provided to keep them together. A 3mf…
Stamp for leather patterning
Add a bold and edgy vibe to your workspace with this Biker Leather Jacket Pencil Holder ! Inspired by classic motorcycle fashion, this unique desk organizer combines attitude and functionality. Perfect for pens, pencils, brushes, or small…
Ready to use Hogwarts leather stamp. You need 2 pieces of flat wood and a screw clamp to stamp the image properly. Any other press will work anyway. Leave leather in water for a few minutes before clamp in position. Better to use a soft…
After some testing found that shrinking the original down to 83.8% was a good fit. Also reoriented the part for printing Glued it in with super glue If you'd like to support me please check out my filament wishlist here Print Settings…
This is a remix of my previous design for the Leatherman bit kit and ratchet driver pocket organizer found here . This new design is for the bit driver extender instead of the ratchet driver. It also now has positive retention for the bit…
4 different radius sizes exist. 1/2 inch 3/8 inch 1/4 inch 1/8 inch
This is a fairly simple stitching pony that is fully 3D printer, no hardware required, but you're probably better off buying a wooden one for like $20. This one only allows for clamping of small projects, like wallets. This is the first…
You can print this using whatever you want, I've obtained great results with PLA and TPU. No screw required, increase print to 102% if you use TPU to better and firmly fit into the blade. Buy me a coffee if you want to support me!
1x3 #gridfinity bin that fits a Leatherman Wave multitool. Remix of Zack Freedman's Gridfinity template. I'm adding this line on 1/14/2025 to prove to Makerworld that I am the original creator of this Leatherman Wave Gridfinity remix.
Leather stamps for pattern
Please note that these patterns are for the final size of the strap. You need to make sure you cut a bit longer leather in order for you to be able to glue and fold for the springbars. Use the pattern to get the correct final size and…
These craft carts hold six by nine of the base frames. Visit Zack Freedman's Gridfinity library to access the original Gridifinity meshes and the frames or weighted baseplates baseplates. Leather Tools Featured Buckle Punch Burnishers…
This is inspired by Adam Savage's aluminum Leatherman holster, but I have a 3D printer, not a metal shop.
This model organizes the Leatherman bit kit and ratchet driver so that you can carry it in your pocket easily. It is a single file. I printed mine in Prusament PC blend with carbon fiber filament on a Prusa i3 mk3s+. Both bit kit cards…
I remixed the popular Free P4 bit holder to hold the new Leatherman Arc and include a positive retention bit holder as well. The print is a bit bulky, but I've used it for a few months now and it was indispensable while remodeling my…
Uses the dovetail system to attach to the skadis system. Recommend printing at 0.2mm layer height otherwise the dovetails will be too tight.
I wanted to be able to open the file and saw on my Leatherman Arc with my thumb so printed a simple insert. It would probably be more comfortable to print out of TPU (scale up 1-2% if you do for a snug fit) but I printed it normal scale…
A simple hand tool that helps you pull stitch chisels out of the leather without damaging anything. 60mm x 35mm x 40mm Very lightweight. Works perfectly with cheap beginner stitch punches/chisels. Leave a comment if you try it with more…
A friend of mine owned this style of wallet ( 1 , 2 ). There's no stitching or gluing required to make the wallet, so it was simple enough to attempt as my first leatherwork project. Years later, I still use it and would recommend others…
I wanted to make a more compact bit kit holder for the leatherman bits since the original ones that it comes with are bulky and take up a lot of thickness in a sheath. I modified a model I found and added an extra spot for the micro…
Another timeless piece a classic leather armchair Legs are printed separately and glued
Parts to wet mold leather and make a large multitool case/sheath. Finished inside dimensions are 4.5 x 1.5 x .75” (114 x 38 x 19mm) . BaseForm, Form, Mold, FormTrim, and Jig for a large Leatherman. Only the Form and Jig are needed but the…
A set of printed parts to form your own airpods pro case. All you need are these parts, a patch of leather and some tiny clamps. You have to wet the leather by placing it in a bowl of water for a couple of minutes. After that, you place 2…
Handy thumb stud for the Leatherman Surge knife to easily gain acces to both of your knifes. The tolerances are made for press fit It is possible to secure it with some super glue, but not needed :) Printing settings layer height is not…
This is a jig for the 3x2in (76x51mm) rectangle and the 2.5" (63mm) round leatherette patches. It also has a handle for easy removal. I would really like to see your makes and hear from you about how it worked out.
Remixed the original design to have a better axle and handle attachment system. Also, include Fusion360 file.
This takes 2 M3x20mm screw and nut to keep the Bit Kit together.
Leather stamp - Duck Easy to use. 1. Moisten the leather with a wet cloth 2. Attach the leather stamp 3. Tighten the clamp and wait a few seconds 4. Done
Edge polisher for leather. Suitable for all leather thicknesses.
Print times: Latch- 6m35s 3.96grams Body- 56m34s 33.33grams Print Instructions: Print in default orientation. No Supports needed. 2x walls. 10-20% infill. I printed in Bambu Matte PLA, but this should work with most materials.
print the "corp 1" with support, print the "corp 2 " twice. saok your 2 piece of leather, and press a sandwich: corp 2 leather piece first corp 1 leather piece second corp 2 let dry the sandwich with pressure at least 24 hours. you have…
Leatherman Wave holder for Honeycomb storage wall
Want to try to create 3d models for some leather stamps. should be 100% infill and 3 side layers (if fits :D) to handle the hits.
This is only 1mm thick so it's pretty flimsy. If I find a better balance between speed to print and strength I'll upload that version. This one does work just flexes when you pick it up while full.
I really liked InverseSandwich's design, but I changed it to suit me more moved the belt loop higher, so that the top of the Wingman wont dig into me when I sit down made the bottom slot go higher to make popping the Wingman out easier…
While this is my original print design, it is modeled after a similar production model for sale on another site. I am not affiliated with that product or producer, and I'm sure that product is of exceptional quality. This is just my…
Leather mold for pen holder.
Loosely inspired by Adam Savages Youtube video about making a belt holster from aluminium, I created this holster for my Leatherman Charge TTi. Belt size: up to 40mm wide and 3mm thick, but feel free to contact me if you would like a…
A character I play in a regular tabletop game. The base is designed for standard one-inch squares. The rest of the model is larger than a typical miniature due to being of human proportion and shrinking that down to 28mm size makes legs…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Easy open tab for the leatherman wingman utility knife. I got tired of trying to open it one handed and decided it needed an upgrade. Slight interference fit, meant to be lightly hammered or pressed into place to hold it in. I used a vice…
The tool rocks a little in the bin, but works good enough for me. Feel free to improve on the design, step file is provided.
Stamp for leather patterning
Angepasste Holster Version von 3D-Designer_AT für das Leatherman Surge mit beiden Bitkit haltern und für Gürtel bis 55mm Category: Tools
8" x 6" x 3" Rounded Edge Wet Mold for Leather Crafting
These stitch markers works same as your wing dividers for marking a stitching line onto the leather surface. The advantage is that these are set to the same distance all the time. You can change wing dividers between projects and you…
I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid…
Simple Toothpick with (or without) lanyard ring. Tool that fits in the pocket clip slot of the leatherman tools such as the wave, charge or surge. Version with ring and without. Longer toothpick and short. Do not care about material, you…
I liked the changes that @titleunknown_285431 made to the Pressly by @Wallnutts_278875 , but I didn't have a heat-set insert for the ¼" bolt and I didn't feel that a single slot for the punch tines would work well for my purposes. I also…
Leatherman FREE P2 / P4 multi-tool adapter that uses the Philips head screw driver to allow any hex 1/4" (6.35mm) screw driver bit to mounted. The adapter can be stored on the clip. The assembly still fits inside the nylon carrying case.…
This is a remix of schutz's Pocket Screwdriver Kit. This kit holds ten of the flat Leatherman driver bits. They fit well in the elastic loops on the side of my nylon Leatherman sheath. I added extrusions for six 5mm x 1mm disc magnets to…
Leather Punch set organizer for standard Leather Punch Sets. This is simply made to keep the Punches from rolling around my Leather tool kit.
A leatherworking burnishing tool that attaches to a drill. *You will need an M.3 or M.4 brass inserts (whichever works, I used M.4), a corresponding headless bolt, and a lock nut of the same size. * To assemble: 1. Use heat to press a…
Geometry completely redesigned to accommodate the latest Leatherman Surge utilizing effortless retention. The tool slips in under its own weight and is held in place securely. Can be pulled out quickly and easily by pulling it up through…
I added a hole on the underside of this model so that it doesn't get pushed out when opening it.
I work in the Wind industry, and I have found that my Surge + full bit kit are endlessly useful as an EDC. Years ago I made a holster out of Polymorph, and it worked great. I always planned to design a holster for 3d printing, but I…
If you need a stitching pony for leatherwork but already have a bench vice, this is a simpler alternative that takes advantage of your vice! Just place your workpiece inside the plastic clamp, then place the clamp inside your bench vice…
Pattern for a Leather wallet that can hold 2-4 cards
A Leatherman bit holder for the Arc. Picks up the fasteners for the pocket clip. Shown printed at .1mm layer height out of Polycarbonate with a .6mm nozzle.
Taking inspiration (but building from scratch) from Stoubian's zipper foot - this foot allows much closer alignment of a guide - meaning straight stitch lines as close as 2.5mm from an edge. Version 13 is updated with reduced stress…
Gridfinity bin for Leatherman ARC. Tool is easy to pick up and under the tool there is a handle to pick up the bin. Pictures show a print with color change at the top 5 layers. Also ironing is turned on for smoother top surface.
the leatherman wave is an amazing tool but not the greatest screwdriver but i love the leatherman screwdriver bit set with the extensions so i design this screwdriver handle that accepts the leatherman bit/extensions and now its my…
An easy way to organise tools using the IKEA Skadis boards. Custom designed around leather craft tools. In three variations: Regular wooden handle Front-loaded in the tool holder, for the usual wooden-handled Ivan leather craft tools.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Remixed the Skeletool hammer to hold 2 extra bits in the carabiner/bottle opener. The bottom part snaps in place. v2 already available extra plastic around the pin-hole & less… uhhh “glitches”? The model is smoother, fits better & more…
Description This is a stitching pony for leatherwork / leathercraft or other stitching activities. It folds into itself for easy storage. It is designed to be a long-lasting item that can withstand some abuse while not breaking the bank…
Thumbstud for Leatherman Free T series multitools
Whilst great for emergencies, using the bit holder on the Leatherman® Tool can be a bit awkward so designed this compatible accessory to complement my Leatherman® Tool & Bit Set. I found most success printing handle first in PLA with…
Storage for the Leatherman Signal compatible with the Gridfinity system by ZackFreedman . Grid size: 1x3x6 Note that fitment was designed with the pocket clip installed. Depending on which side you display, the Leatherman will orient…
Little known fact: I bought my first 3D printer so that I can print leather embossing stamps. This actually works pretty well if you are interested in it yourself. So to go back to my roots for a bit – and fitting with the Catch-All Trays…
Leather stamp - Deer with a doe 2 Easy to use. 1. Moisten the leather with a wet cloth 2. Attach the leather stamp 3. Tighten the clamp and wait a few seconds 4. Done
Recommended printing in 100% infill, Variable layer heights. The teeth being finer layer heights, PETG or PLA has worked nicely for me, Ender 3, Prusa Mini & Mk3 can print without supports, but its better with. I work for the ambulance…
This is my own design of a leather honing wheel. If you have the Tormek T8/T7 drive wheel it will fit. You can Upgrade your old SA-250 or Supergrind 2000 Versions with the original T8/T7 drive wheel as well! Alternative you can drill out…
This Leather shoe model was made by Revopoint POP. If you want to get more models like it, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Print Settings Printer Brand: FlashForge Printer: Adventurer 3 **Rafts:** No Supports: No…
I wanted to find a leatherman arc holster for my leatherman. I couldn't find one online, but I found a couple of models I could combine and create the thing I am searching for. Took me sec but I got it working. Main model I got from the…
I recently purchased a Leatherman Skeletool multitool. I absolutely love the tool, but it has one minor problem-- the driver bit (screwdriver) is exposed and digs into my hand when I'm using the pliers. This is a small slip-on cover to…
This is a fusion360 model for creating custom leather stamps that can be hammered into damp leather to leave a surprisingly good impression. I've included a few example stamps you can use, and the handle to use for hammering it. Making…
Its perfect for fully printability! Difference from original: 1/ base for fixing with clamp to the table 2/ angled surface for color saving 3/ additional bodies on pin for better adhesive while printing 4/ color height fix with additional…
Just wanted a spot for a weatherman wave laying on its side. I made another version which is deeper but haven't printed it out to test it yet.
Ikea Skadis Leatherman Multitool Holder. Designed to fit the Wave+, but also fits others.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This print is designed to carry an extra bit for your Leatherman Wave or any other Leatherman that supports that bit system. Very practical and very nice to put on your keys so its always in your pocket!
This plate / jig holds both leather patches, 2 x 3 (rectangle) and 3 inch (round) for the XTool F1 laser... Note: > You can print this plate in any filament you want. (However, a “tough” filament is recommended) > 15% infill , 3 walls,…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
There weren't any free 3d printable holsters for the Leatherman Free P4 that I could find, so I decided to design my own. It's still a work in progress, and will hopefully get better if I have time to work on it more. I want to try this…
