53 modeli
Angled clip for IKEA Ledberg LED light (the rigid version, not the flexible) to replace the included straight clips. Suitable for the lighting in a printer enclosure.
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
SKADIS (Lochraster) Halterung für die LEDBERG Lichtleiste von IKEA Habe die Schrauben verwendet die mitgeliefert waren. Link zur Lichtleiste: LEDBERG Lichtleiste, LED, bunt - IKEA Deutschland Druckzeit : ca. 2 Stunden // 10g Viel Spaß…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
I was building a LACK enclosure and when in Ikea found a roll of 24V LED lighting. (ikea part: 003.597.15 - you wont find it online). LED has an adhesive back, but I needed clips to hold the ends down. Mixed these up in Tinkercad and they…
Ledbar for Ender 3s1 designed to fit Ikea Ledberg ledstrips. Optional endcaps for that clean look.
this is a perfect low profile light design modified for easier wiring, and screw mounts with square nuts. This is to be used with the Light box mount. The MK4 will have to install the modified Z mounts I made here: Here Lights: Here…
Connectors for IKEA Ledberg LED lamp, with flexible (using regular PET filament) connectors. I made these because all the other connector models had their male connector contacts too rigid, so one pole would often press the board away…
Eine abgeänderte Version von der Unterseite der Greek Meander Lamp von Hultis, ich habe die Unterseite so konstruiert das man die Ledberg von Ikea versenken und einkleben kann. Von der Unterseite gibt es 2 Versionen, eine 100% und eine…
I made this hooks/Holders for the Ikea LedBergs Leds so I can iluminate my skadis pegboard. He hecho esto sujetadores de tira led de ikea para la skadis de ikea y iluminar el panel y en mi caso, tambien ilumina el escritorio que está…
Inspired by https://www.thingiverse.com/thing:4303285 A holder that points with 30 and 45 degrees. Print instructions Category: Other Summary Inspired by https://www.thingiverse.com/thing:4303285 A holder that points with 30 and 45 degrees.
This is my entry to the "Let there be light!" Prusa contest. It was made in collaboration with my brother. This lamp uses an IKEA LEDBERG lamp or any other battery powered LED lamp with a diameter smaller than 12,4 cm.…
V1 required a lot of sanding and filing, so i made v2 with larger hole for the light strip and a thinner back plane
Little mount for theLEDBERB lights. Sits at 45° on the Ikea Lack legs, or any other square edge. Print instructions Cicular face down, chuck a support enforcer in there, too.
I did this remix because the design for the Ledberg sockets has changed a little bit. The fit is just right with this scale, however the male side leads might require some tinning or bending to make a proper contact with the leads on the…
Ledbar for Ender 3s1 designed to fit Ikea Ledberg ledstrips. Optional endcaps for that clean look.
This is just a very quick mod of the Ender 5 Light Bar Clip to allow the Ikea LEDBERG Led light to be clip attached to the front crossbar of the Creality Ender 5/Pro. There's a version with the LED attached up and facing down to the bed…
This an holder to mount the switch of a LEDBEG led kit on a 3D printer using 2020 extrusion profiles. The switch by itself is pretty common, so this mount may be used for many other devices. Fusion 360 source and STEP files included.…
Here's a simple lamp I designed to accept an Ikea Ledberg LED light. I printed the base and top in Hatchbox wood PLA and the lens in generic white PLA. To allow space for the cable underneath I used some small rubber self-adhesive dots…
The Cube Lamp was designed by me to fit an IKEA Ledberg LED Lamp. Printing Settings No supports needed. Should be printed with 2 shells (1 inner and 1 outer) and 0% infill. To make sure that the 2 shells are melting together I recommend…
i use the ikea lights in my ender 3 lack setup, but the button would just hang there. so this is a mount. Print 2 pieces
These are the Ikea ledberg adapters, modified to fit my newly (as of Mar. 2023) bought ledberg. Sources are tracked under https://github.com/nils-a/ledberg-cad As I have not checked other remixes before I started remixing this, this is…
This is a Remix of the already great clip by Basteltitan because i needed on that can be fastened using a screw. Category: Replacement Parts
This is a perfect low profile light designed for easier wiring, and screw mounts with square nuts. This is a modified stock Z-top Prusa mini part. No other changes were made. Lights: https://www.ikea.com/us/en/catalog/products/40430828/…
This is a mount that allows for a Ikea LEDBERG LED lighting strip to be mounted on the top bar of teh printer. This will work with any Prusa MK3. This is designed to work with the Ikea LEDBERG LED lighting strip:…
This stand is for mounting one Ledberg LED element (25 cm length). I use it to illuminate my printer at night. No supports needed.
I wanted a way to give general light to my Ender 3 while printing and, since I haven't got around to putting together an enclosure, decided I needed to mount some lights on the top of it. This model is about as large as I could make it.…
Hallo , ich hatte schon für meinen Prusa Mk3s+ eine Halterung für die Ledberg von Ikea , nun soll der Mk4 eine erhalten, leider fehlte die Aussparung, bzw. das Sechseck wie vom Vorgänger und nun kam mir in den Sinn es selber zu machen.…
Print a plate of 4 and assemble with one Ledberg kit. This version fits 55mm wooden beams.
Replacement of original mounting ring for LEDBERG round light from IKEA Printed lying on mounting eyelets, with standard supports for upper ring. Light just snaps in like in original. My print is printed as draft 0,28mm layers with the…
I had a package of IKEA Ledberg at home and was looking for an easy way to use the in my printer enclosure. I didn't wan't to use the included double sided tape and also didn't want to drill any holes into the plexiglas I created this…
I suggest printing with 3 perimeters vertical shells so that the clip that grabs the frame is all solid and sturdy
Intro I was sprucing up my Ender and really wanted to add a light bar to it for remote monitoring, but I didn't want to pay for the official Creality one. I hunted through drawers and found an old IKEA LEDBERG light bar. It was the…
I needed a a way to connect a single led string and a way to attach it in my 3d printer cabinet. wire I used was 3 mm gauge
This an holder to mount the hub of a x4 LEDBEG led kit on a 3D printer using 2040 extrusion profiles. Used on a Alfawise U20 (CR-10 clone), I was able to mount the LED on the top of the printer (using Kay82's holders ), and the hub on the…
I finally wanted something other then tape holding up my light for my printer. So I made this. It is able to slide around, but doesn't easily fall out. Made with Fusion 360 Category: 3D Printer Accessories
Remix of a Ledberg mount and a prusa mini lamp holder
A simple hood for the Ikea Ledberg led spot. I had a nasty reflection in the hood of my record player with three of these Ikea Ledberg spots above it. This hood fixes that reflection and keeps light for shining towards you. It simply…
M10 Tube Holder for ikea ledberg Print Settings Rafts: Yes Supports: No Resolution: 05 Infill: 100 Category: 3D Printer Accessories
Made for these: https://www.ikea.com/de/de/catalog/products/30400916/ I rebuild it, because it does not fit for me. So I do some changes: -the body between the arms and the hexagon is a little bit higher, this solved my problem -the…
Support IKEA Ledberg Need screw M4 Installed in IKEA Lack enclosure
I remixed this to fit in a server rack. It has a slot and slide design, doesn't need scews. Glue is needed. This is a remix of this: IKEA BESTA-LEDBERG Ball-joint Holder Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
This models are remixes to adapt ledbergs to them and make the complete set together.
Mounting clip for IKEA Ledberg led strip on a 3030 extrusion. Used this to mount the strips inside of my RatRig V-Core 3.1 enclosure but it will fit any other printer using this extrusion. I used 2 clips per led strip and printed mine in…
Remixed the lamp to mount Dioder L1327 multi-colour led lamps. New mount for lamp, to mount, remove the metal mounting plate, then snap the lamp in the mount. (The pivot point should point toward where the metal plate was, photo will…
Mount LEDBERG way above where the printhead of the Ender 3 gets ... As I converted my Ender 3 Pro to Direct Drive with a simple 3D printed bracket mounting the motor sideways in such a way that you don't lose any build-volume, I also…
Extended version of mount by Blinkii removed the "stop" to allow the mount to sit "in the middle" of the led strips extended the mount, 4 lengths; +16, +37, +58 and +100mm This is actually a remake of a mount I created (by remixing the…
This is a low-profile clamp/bracket used to mount an Ikea LEDBERG 12-volt power suppply to the underside of a cabinet with one screw. A regular #8 or drywall screw can be used. For best results, I chose to print this thing with the…
Converted to double sided and added angle to the lights. Print on side. Category: 3D Printer Accessories
A simple cover to hold the cable junction/puck and the extra lengths of cable from the 4 lamps. There are loops to attach zip-ties inside of the cover for bundling the cables. There is a version where the cable slots are centered on each…
As I found out the Ikea Dioder series was discontinued and I still wanted to put LED-strips in my 2nd Vertex K8400 I bought the replacement series "Ledberg" LED-strips. These need a slightly bigger clips than the Dioder series did so I…
Brackets for Wanhao i3 Plus (& possibly the other Wanhao i3 versions if the dimensions haven't changed?) to hold IKEA's Ledberg strip lights, Provides wraparound lighting of the bed when used in conjunction with Ledberg Connectors (…
I was looking for a mount for LEDBERG, just like dmasyukov designed, but i wanted to improve the strength and visual appearance.
This is a u-coupler to electrically connect the 3 strips of Ledberg to a single light source. This is designed specifically to be used with https://www.thingiverse.com/thing:4729201 Originally created in OpenSCAD (before I discovered…
Inspired by https://www.thingiverse.com/thing:4303285 A holder that points with 30 and 45 degrees. Print instructions Category: Other Summary Inspired by https://www.thingiverse.com/thing:4303285 A holder that points with 30 and 45 degrees.
