761 modeli
This is used to keep the liquid cup with the soap dispenser and prevent dripping. Should fit the standard laundry detergent dispenser. I printed mine at a 50deg angle with the sharp point cut flat and use supports to make sure it doesnt…
Wydruk około 5,84 €–7,13 € nettoWstępna wycena jednego wariantu
For fast printing of large objects, thin-walled models or "spiral vase" printing are often used. This method has a drawback - a large surface requires uniform heating and sometimes deforms: it bends in large waves. If the wall is even,…
Wydruk około 6,16 €–7,53 € nettoWstępna wycena jednego wariantu
The bottle can simply be snapped in and the closure can be opened or closed together with the holder.
Wydruk około 1,42 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 2x2 Gridfinity Stand to store Bottles with 21mm diameter, e.g. Vape Liquids with 10ml.
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
Liquid Spillover Sculpture.
Wydruk około 8,75 €–10,69 € nettoWstępna wycena jednego wariantu
5 ml Meßlöffel für Flüssingdünger Hier ein kleiner Meßlöffel für Flüssingdünger. Die Füllhöhe bis zur Markierung ist 5ml. Mittels des Lochs im Griff kann man den Löffel aufhängen. Schichthöhe = 0,1mm Translation DeepL 5 ml/ (0.30512 in³)…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed for my own specific need but sharing anyways. This holder holds 4 bottles of 10ml vape liquid together and is made so they fit nicely upside down aswell so you can get the last bits out of the bottle without having to balance…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
During the summer period, humpback whales do live in the sold polar waters - so it could be assumed, that the water in the cooling system is also cold ;-) I would recommend printing the base in a (dark) blue color, the whale in grey. If…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Contest Entry for MasterLiquid ATMOS Customization. Features a Waffle Maker. This design can be printed all at once (with minimal supports), and features a working hinge. After all these years, you can finally make waffles from the heat…
Wydruk około 4,64 €–5,67 € nettoWstępna wycena jednego wariantu
I draws this holder for a friend who wanted to Organize his liquid bottles
Wydruk około 3,10 €–3,79 € nettoWstępna wycena jednego wariantu
Fabriqué pour un Lave vaiselle Indesit DFG254BSFR. Peut convenir à d'autres modèles
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Pořadač, box pro eliquid, nebo aromata 4x22mm; 2x31mm; 1x42mm
Wydruk około 3,45 €–4,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cover for Catchmaster DEFIANT premium liquid ant bait from amazon: https://www.amazon.com/dp/B0D9MTJK6W?th=1 Fits over the trap with room and tiny doorways for the ants to get to the bait but makes it harder for kids and pets from…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
A practical funnel designed for easy liquid transfer between bottles and containers. Ideal for pouring leftover soaps, cleaning products, detergents, or other household liquids without spills. The stepped diameter design allows…
I created some funnels with different sizes of threads/screws that you will find on fluid cans for antifreeze fluids (car) windshield cleaning fluids (car) engine oil (car, motorbike) gear oil (car, motorbike fork oil (motorbike) … The…
Update: 4/07/2026 Alert! PRO Version 2 Incoming: For anyone looking to build the PRO, please wait, I have Version 2 in coming, its fully complete, and much better than the first version, the case is now unified and supports…
This is a 3D printed version of the jiggle siphon - an easy way to siphon fluids without the need to first prime the tube. Simply shake the submerged jiggle siphon and fluid will start flowing through the tube. It works as long as the…
Didn't feel like spending 5 minutes playing with supports so I spent an evening designing this instead. I printed mine with 3 outer walls, 20% infill, and 0.12mm layer height, which is way overkill. 0.2mm, 15% infill and 2-3 outer walls…
Not gonna lie, some of your drips are likely to break off but it will be hard to notice. Consider this a benchmark. =P Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…
This is a mixer tool for mixing. It prints without supports, the hexagonal handle has a standard 1/4 size and attaches directly to your electric drill. Diameter = 40mm Head height = 40mm Hex handle Length = 160mm
///////////////////////////////////////////////////////////////// Update: 2/10/2026 Uploaded files for the Thermalright 6.86" LCD Display Link to the product: https://link.amazon/B0j0CNDgn Link to the software setup for Bazzite:…
Compatible with Cooler Master's MasterLiquid 240 Atmos & MasterLiquid 360 Atmos . The inspiration comes from Cooler Master's own Visual Identity, showcasing Cyberpunk-style glitches & patterns. Designed by our own ID team, you can make…
Remix from Kyle B Johnsons Gridfinity glue stick, this one holds the new Liquid Glue from Bambu Lab.
USS Dripper – Universal Liquid Transfer Funnel No space for waste. The USS Dripper is a two-part funnel designed to make transferring the last remains of thick fluids (like laundry detergent) from one bottle to another easy, clean, and…
standard dosing cap can be screwed Available in to two different height 15.5cm and 13.8cm
(deutsche Beschreibung weiter unten) English: Description: This practical adapter allows you to connect two detergent bottles to cleanly and completely transfer the remaining detergent from a nearly empty bottle into a (nearly full) one –…
To simplify the printing process, it is recommended to print the tray with the backside facing down, aligning all internal channels for easy printing. With comparable size to the original tray that came with our Samsung machine. The…
you can use M4x35mm screws with nuts to hold it together and M4x12mm to attach the crank.
Hi all, here is my first vase to be produced in quarantine. I'm an absolute fan of this vase. Printed at 0.08mm layer height and I think it has an exceptional soft appearance and looks great in the light. Thank you for printing!
Added a Thread to the Model https://www.thingiverse.com/thing:5980420
A single tool to open every type of bottle. There are 3 GIFs that explain how to use it! For small bottles, use the loop; just slide it over the narrow part, and once you reach the bottom, just pull. For large bottles, use it like a…
A 3D printable model of the liquid piston engine designed by me. Print Settings should be 0.2 or 0.1mm for layer height because of the axial fitment of the bearings. The holes in the printed parts for the bearings are modeled as 37.1mm…
im still too lazy to write a descripton
What? A onehand operated tool that can squeeze a stick of churu or whatever liquid pet treat you wish, into a spoon that can be slotted into the device. Much like the ones you find on amazon: Why? You need the other hand to groom or wash…
@med145 's wonderful bracket adapter ( https://www.thingiverse.com/thing:2238848 - The attribution field was broken at the time of upload), but, includes the standoffs so that the STOCK backplane + screws can be used, without any sort of…
About Elite Liquid Elevate your build with a perfect blend of style, performance, and customization. Featuring an exclusive hexagonal, crystal-clear outlook, Elite Liquid 240/360 offers easy personalization with tool-free, adjustable pump…
Arctic Liquid Freezer III AIO Radiator Tubes Comb 13mm spacing
This model is used to hold various flavors of Liquid IV packets. It holds up to 6 different flavors and each section holds about 8 packets of Liquid IV. I printed this in PLA with no supports or brims and had no issues with printing this…
One of my first self made models. I was in need of a solid stand for my display case and this is the result of it. Print instructions: Layer height: 0.24mm-0.28mm Infill: 12-15% gyroid (rectangular/grid should work fine too)…
Print upright. PETG or PLA. 21.6.2025:I moved the text to the left and right side. It is easier to read for left and right handed people. Other laundry helps Please finde also my scoop for detergent powder:…
I always struggling when I trying to fil our spice bottles or when I need to pour some liquid in a tiny bottles. The smalles funnel we have is either to big for small bottles or has narrow throat for poweder like substances. I decided to…
I recommend printing PETG, 4 perimeters, 4 upper and lower layers, filling 30-40%
Samsung washing machine insert/flap/cover for liquid detergents. Fits better to the tray than the original item that was included with the machine. Compatible with my Series 9 model (WW90J5426FW) and likely Series 5+ / 7 / 8. See…
Die Halter werden einfach aufgesteckt, habe sie auf einer 240 Liquid Freezer II verbaut, sollte aber auch auf die anderen Modelle von Arctic passen. Da die erste Version aus pla war und deutlich instabiler Gestaltet war habe ich sie nun…
this is a relatively quick remix of Fatgeek's Liquid Glue & Scraper Holder (for BambuLabs accessories), attaching a mount point for the honeycomb storage wall. I printed mine standing up with no supports in PLA-CF
This is a student project to design a full liquid rocket engine capable of producing 3600 lbs of thrust. Designed with inbuilt regenerative cooling. Intended to be a functional model when 3d printed in Inconel alloy using an FDM metal 3D…
THIS PROJECT IS WIP. PICTURES AND MODELS WILL BE UPLOADED AS THEY ARE TESTED. This is the first of many push-to-connect fittings designed to carry compressed air or low pressure liquids. These are designed to be print-in-place , but also…
A drippy smooth dragon bust that looks like a splash that has been paused in time. Supports Required. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Hello Everyone This time I am sharing stands for scraper and Bambu Lab glues in liquid and stick versions. The scraper and glue stands are identical in design to my other Scraper Stand project. It has the same height. It only differs in…
Alternative version of my stand for OXVA Xlim Pro 2 Vape Pen + Cartridge + Small Liquid Bottle ( https://www.printables.com/model/1068557-stand-holder-for-oxva-xlim-pro-2-vape-pen-cartridg ) One isn't necessarily better than the other,…
We’ve teamed up once again with Printables.com for a complex design challenge ! This time, you’ll get to choose from three different modular products to make your own. Cooler Master’s FreeForm 2.0 philosophy is all about giving makers the…
This is a remix of my own BambuLab Scraper & Glue Stick holder that adds a slot for the BambuLab Liquid Glue. The magnet versions are designed for 15mmx3mm round neodymium magnets. I found that with all the weight of the scraper, liquid…
A new design, now you can open easily a several model of bottles. You have to use as a common bottle opener. Insert the tooth into the appropriate recess and then lever it on the bottle. (As you can see in the photos) If you print this,…
Compatible with Cooler Master's MasterLiquid 240 Atmos & MasterLiquid 360 Atmos . The inspiration comes from Cooler Master's own Visual Identity, showcasing Cyberpunk style glitch effects and patterns. Created by our own ID team, you can…
A drill attachment to mix smaller paint cans or liquids. Measurements: 37x35x110mm This model is smaller than my other ones. If your project requires to mix bigger quantities, take a look at my other models:
Hello Everyone This time I am sharing stands for Scraper, Bambu Lab glues in liquid and stick versions and Filament Cutter. The scraper, glue stands and filament cutter are identical in design to my other Scraper Stand project. It has the…
This is a dosing cup for laundry detergent (e.g. for powder or liquid) that I created. Common dosing amounts are marked within the print. It is also helpful for scratching out the last rests from a big powder box. Please consider a small…
Terminator 2 T-1000 Liquid Metal Bust
Siphon liquid detergent tray for washer Two tray dimensions Normal Short/wide See Narrow tray for Blender file for easy modification to fit your washing machine. Printing No supports needed. Print backside down as shown below Example…
Compatible with Cooler Master's MasterLiquid 240 Atmos & MasterLiquid 360 Atmos . Never cease your experimentation and imagination with LEGO. Now, you can even extend your creativity to your water cooling unit. Through 3D printing, we can…
houses 11 liquids in standart longfill/shake and vape 60 ml bottles
I have done something similar in the past on an older model of cooler, now I present it to you as a new model for the competition. Two files uploaded, one for an idea of how it looks assembled and the other a model to assemble. I use M2…
Arctic Liquid Freezer III Mount Bracket with Dual 80mm Fan Shrouds for ASRock BC-250 An upgraded version of my BC-250 AIO mount bracket, now featuring integrated 80mm fan shrouds on both sides. The angled shrouds direct airflow directly…
There are lots of issues with the model, such as the e-rod not aligning perfectly and being too fragile to turn the rotor externally, as well as the rotor being printed in two parts and only being able to rotate smoothly counter…
A drill attachment to mix smaller paint cans, resin or any other liquids. Measurements : 145x55x60mm / 180x55x60mm Remix of:
The model has the pass trough hole which can be used to illuminate the eye using the LED from the pump. The eye could be printed in different material/painted to really shine (as example used original model picture). I was concidering…
This bottle reuses the pump from "CeraVe Foaming Facial Cleanser | 12 Fl. Oz | Daily Face Wash" which can be found on Amazon. Original F3D file can be found at…
Per VOGE Valico 525DSX DSX525 DS525X DSX 525 DSX accessori serbatoio liquido
This sits on top of the printer which can shake quite a bit at times so I wanted a taller holder to better secure the bottle.
Gridfinity 2x2 for 23mm Liquid Bottles e.g. Vape Liquids 10ml
I like AIO coolers :) However, the motherboard & components next to the CPU should stay cool. I've designed a functional MasterLiquid Atmos cap with a fan mount. Here are 92mm or 82mm fan mounts available for your choice. Print as shown…
Hello Makers! Today I decided to publish one of my very useful design ideas for lovers of cooking, but above all kitchen cleaning. A beautiful liquid soap dispenser with a built-in sponge stand! As an external texture, I decided to use…
Cut down version of the original to fit a container in our pantry. Included is a version with 'windows' for better visibility.
Compatible with Cooler Master's MasterLiquid 240 Atmos & MasterLiquid 360 Atmos . The pump badge is based on the popular character from the Anime series One Piece. Mix different colors or paint after printing to complete the design. Then…
Crystals placed in a rock base. For multicolor print use translucent material for the Crystal Insert. Use a suitable color for the Rock Base. For printing use support on buildplate only (Rock Base). For better light you can try to print…
It’s the Bubble Slime from the hit JRPG Series Dragon Quest! Or, y’know, it could be a Liquid Metal Slime if you’re savvy enough to print it in silver instead. The Green Bubble Slime is the Single Extruder assembled version, and the…
I have an old Optima DELUXE PROFESSIONAL essential oil nebulizer / diffuser that is 30+ years old and the pump still works great. The old pump is rated at 5000 cc/min at 4.0 PSI The glass nebulizer however has seen better days and is very…
A drill attachment to mix smaller paint cans or liquids. Measurements : 144x40x40mm
made some changes @ewr2san's original model (https://www.printables.com/model/5696-dripping-ooze) to get tw
I designed this electric pump adater for using with Aqua Marina Liquid Air V1 pump hose, to save time with inflating paddleboard. With electric pupm I can easily inflate the paddleboard to basic shape. After then I switch the hose to Aqua…
[8/6/20 V2 hinge pin uploaded - now contoured and sized to sit flush against the main body for a much nicer look. I did design a variant that had a much less bulky body, but it ended up using practically the same amount of filament due to…
Arctic Liquid Freezer Einfache Aio Lösung für ein Schlauch-Management. Die Halter werden einfach aufgesteckt, habe sie auf einer 240 Liquid Freezer II verbaut, sollte aber auch auf die anderen Modelle von Arctic passen.
Works well at mixing without introducing air bubbles. you may need to glue the impellers in place if tolerances aren't working for you.
This is my little desktop/wall mountable vape eJuice stand. Designed specifically for 30ml vape juice bottles. The fit from my print is perfect and needed a once over in each hole with sandpaper for smooth slide in/out. If it's too tight…
Msr liquid fuel pump for dragonfly pump…it should work too for the standard pump (grey). Printed in Amz3d Pla. 10% infill.
for vaping Liquids, in 3 different size bottle's 10ml, 10ml glass, 30ml Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 15 Filament: prusament PLA silver Category: Organization
In addition to the cup holder, the riser has a 4 degree incline to help the detergent flow out of the bottle. Printed on a Bambu X1C with PETG. 0.28mm Extra Draft 3 Walls 10% Adaptive Cubic Infill
Die Kugel kann ohne Stützen gedruckt werden. Die Drucktemperatur sollte hoch gewählt werden, damit der Druck so dicht wie möglich ist. Meine finale Kugel habe ich mit 100% Füllung gedruckt, um das eindringen des Waschwassers zu…
2x5 box for the Bambu liquid glue bottle
In love with the Capcom video game saga, I couldn't help but create the right cover for this new competition. I included all the classic references to the resident evil umbrella corporation logo
A holder for 2 sponges and a dishwashing liquid. In 2 parts to make printing easy without support. PETG is more resistant to water than PLA! Slicer setting for the holder : Wall loops: adjust so you don't see any gap between external and…
This is a container for the liquid ant bait for placing outdoors in the ground vertically. Search online for "ant bait stakes" to see the use case. You can use the ant bait made by the same brand or your own to (re)fill to make it more…
Hello Everyone This time I am sharing Bambu Lab glue stands for Stick and Liquid versions. The glue stands are identical in design to my other Scraper Stand project. It has the same height. It only differs in width and length. Each stand…
Printing: Badge: print with the text side up. You can use the slicer to set a layer change for the raised text. Print with supports. Lever: print with the text side down. No supports required. Layer change is optional, but could be…
311Props' Liquidtex ink Tray/Holder adapted to fit gridfinity.
Diese kompakte Ameisenfalle mit Deckel ist für Pulver- oder Flüssigköder geeignet. Die Öffnungen sind so dimensioniert, dass Haustiere und Kleinkinder nicht an den Köder gelangen können – die Ameisen aber problemlos hineinfinden. Durch…
Welcome apprentices! Let me show you how to master this sorcery before the wizard completely liquefies!! Set your first Layer height to 0.24mm and the normal Layer height to 0.2mm….. Hit that magic Print button and safe the Wizard!
Semi-spherical bottle stand to hold bottles upside down. Useful for shampoo, conditioner, liquid soap, dishwasher liquid. The diameter of the hole is 31.5 mm. Let me know if you need other sizes. Download STEP and Fusion 360 files from…
There wasn't an M-Series mount or case for the Pixel 8, so I spent a few hours designing this from scratch. All I had was a small ruler, so it was a lot of trial and error. Note: From my testing, sunlight shines through or reflects off…
