3642 modeli
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
Wydruk około 2,47 €–3,01 € nettoWstępna wycena jednego wariantu
UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Metric Screw and Nut Measuring Tool This is a remix of the great measuring tool from cmh . Link: https://www.prusaprinters.org/prints/38356 Remix Information I added hexagonal holes on the back to measure the nuts of the corresponding…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
This is a great design by Sneaks at https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up- but also to cmh at https://www.thingiverse.com/thing:4154091 for sanitising this for me (version with no…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a single print that measures inside and outside angles to within +/- 1 degree. It is one print with no support needed. The pointer hole provided me a medium press fit on the pin. This allowed the pointer to turn,, stay in place,…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
Based on the metric versions developed by users Boogie and Sneaks, this version is meant to help measure and sort Imperial fasteners, from #2 up to ½" in diameter and up to 6 inches long. It was designed in Onshape. Printing Instructions…
Wydruk około 4,21 €–5,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Does not require any infill. Original model with Ø 28mm, rescale in your slicer to fit your own tape measure.
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
This is the remix of the Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm) from @fivesixzero. This is a SLIM version - shorter printing time, less weight, slim design… but top quality stays untouched! :) Remixed Things I made few…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was printed with a 0.6mm nozzle, & 0.35mm layer height.
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
Easy tool for measuring TCP and Base on robots. Positioning with magnets. Thanks to strong magnets and lightweight plastic, there is no displacement when touched. Each attachment has a screwdriver hole in it, in case the thread in the…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thought the versions that existed were lacking by either being too big to keep in a tool belt or didn't have common screw sizes over M5. Also made a version with common pneumatic couplings that are commonly used in my industry. Printed…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Make drilling holes easier and faster with this 3D printable Adjustable Hole Marking Tool! This handy tool allows you to measure and transfer the exact distance between two mounting holes onto your workpiece. Simply adjust the sliding…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu
Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed this simple cover for Meanwell LRS-75-12 model but should work for 24V model as well. Fast and easy print. Protects the terminals from the top, but shouldn't interfere with the wires themselves. You can print it at 0.3 (Draft)…
Wydruk około 1,08 €–1,33 € nettoWstępna wycena jednego wariantu
A simple measuring cup that I am using to measure detergent for the washing machine. A full cup is 40 ml and the line inside the cup marks 20 ml. I have printed the cup using PETG but should work with PLA aswell. Rember to use supports…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure screws of length from 5mm to 120mm. Color change for the letters & numbers If you dont want to paint the letters you can add a color…
Wydruk około 3,29 €–4,03 € nettoWstępna wycena jednego wariantu
This small 5 ml measure can be easily stored in the product container. It is easily printed in PLA or PETG. No support required. Please, like my 3D model and/or download it, a small gesture that will perhaps earn me a few Prusameters.…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
This is my original design. It is similar to a circle template. The circles match the outside diameter of galvanized or black pipe made to imperial NPT standard gage. This was a tool of necessity. I was insulating pipes under my house. At…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
WARNING: NEVER LOOK DIRECTLY AT THE SUN THROUGH A TELESCOPE, BINOCULARS OR WITH YOUR UNAIDED EYE. This is a tool for a known problem: If your telescope has a sun filter (and it must have a sun filter for looking at the sun!), you can't…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Gear for meat grinder Zelmer, Gorenje. Diameter - Ø32/Ø62 mm; Number of teeth - 19/74; Height - 24 mm; Landing on a shaft - Ø7 mm.
Wydruk około 1,96 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Vytvořeno a zkoušeno na kávovaru Sage BES875BKS (pro některý trh pod značkou Breville). Pravděpodobně by mohlo fungovat i pro jiné mlýnky do kterých se dává páka s průměrem 54mm a spínáním zatlačením na páku, ale nemam vyzkoušeno. V…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
HSW 5M measure tape holder
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
5 ml Meßlöffel für Flüssingdünger Hier ein kleiner Meßlöffel für Flüssingdünger. Die Füllhöhe bis zur Markierung ist 5ml. Mittels des Lochs im Griff kann man den Löffel aufhängen. Schichthöhe = 0,1mm Translation DeepL 5 ml/ (0.30512 in³)…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this bandsaw jig you can measure if the saw is parallel to the fence. You need a 10x2mm magnet (2mm thickness), which is glued into the hole with super glue. When mounted to the blade you can check whether the fence is parallel to…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Der Messlöffel ist mit Markierungen für die Füllmengen 10 ml, 15 ml und 20 ml versehen. Wir nutzen ihn, um den Reiniger für den Saugroboter abzumessen. Zur Erinnerung sind die Füllmengen eingedruckt. Der Löffel passt bei Nichtgebrauch gut…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein einfach Werkzeug zum Messen von Spiralen in einem Snackautomaten. Das lästige messen mittels eines Zollstocks o.ä. entfällt damit. Folgende Größen können damit gemessen werden: 11, 18,5, 25, 30, 35, 40, 45, 55, 65, 77, 80, 85, 95,…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
Does require supports for front row of letters.
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
Wer häufig eine Nasendusche verwendet, macht dies üblicherweise mit 0,9 prozentiger physiologischer Kochsalzlösung. Diese kann man teuer kaufen oder einfach selbst herstellen: 9 gramm Salz (idealerweise naturbelassen ohne Rieselzusätze)…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made a holder for my tools used when I'm mesauring for CAD-work. Slots for all kinds of measurement tools and storage devices. If you're lucky, yours will fit too! Printed in PLA, no supports.
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
The two parts "0-tip" and parallel attachment can be placed on a folding rule and make it easy to measure the required lengths for a lock cylinder.
Wydruk około 1,69 €–2,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a similar tool to measure the radius of bows on existing solids of unknown design. Something like https://www.printables.com/model/137696-radius-gauge-1-20-mm could be helpful, but I needed it for bows with a larger radius. The…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits over the bottom of the Timemore C3 Pro coffee grinder, to measure the amount of bins to grind. Fits tight but not so tight that it's hard to pull out. The vacuum holds it in place for a few seconds when lifting up the grinder, but…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
Detachable Bahtinov mask for Meade SN 10 inches (F 1016mm, BF200). The mask is designed for a focal length of 1016 mm with a Bahtinov factor of 200. It works well with a telescope inner diameter of 297mm, where it adjusts and self-centers…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed the rugged box by @Whity / @Yanev to fit a Bosch Zamo. The box is smaller than the original packaging and of course more rugged. It has a little compartment for things. Printed in PETG. You will need 6 pieces M3 x 30 screws for…
Wydruk około 6,72 €–8,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
j'ai créer ce pommeau de vitesse car celui d'origine de mon Citroën Berlingo du a son Age commencé a partir en miette j'ai repris les côtes avec mon pied a coulisse et j'ai tous reproduit a l'identique afin de le fixer sil suffit de…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Just my design of a PSU Holer for the Prusa Mini. Mounted the PSU on my IKEA Lack Enclosure. Could be used as Holder for many more things. Print instructions I used black Geeetech PLA with the 0.25 DRAFT settings from PrusaSlicer on my…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
If you have or know someone who has a meade lxd55/75 SN10" and needs to center the secondary, I provide you with the 3D files of these parts that allow you to set the concentricity and rotation angle of the secondary mirror with great…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Store all of your tape related things here! There's a spot for a tape measure and two half circles to hold tape or other circular things like an Oreo. Actually, fill up the tape measure bin with milk and dunk your Oreos, you could do that…
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
Po vytištění může jít zavírání a otvírání krabičky špatně. Stačí ji několikrát opatrně otevřít a zavřít. After printing, the closing and opening of the box can go wrong. Just open and close it several times.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
About Mean Well RD-50A terminal cover done from scratch. On the photos there is a version without an additional mount hole to the right because I do not use it, also quick ugly print, but usable. Please give a like and post makes and…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support needed Not exacltly the same as the original (red) but works well.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Kryt terminálu s živým napětím pro zdroje MeanWell řady RD s terminálem se šesti pozicemi.
Wydruk około 0,16 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Mean Well RD-85A is a fanless AC-DC dual output power supply - 5Vdc 10A and 12Vdc 5A. I'm using the Mean Well RD-85A power supply to power 130 LED lights (SK6812 RGBW - 5v at a max of 5A) and a Raspberry Pi 4 (5v at a max 3A) as part…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a scoop for salt when we was canning that was in between sizes. So here is a 3/4 tsp measuring spoon.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
I like to freeze CostCo chicken breast, and I was looking for a way to stop the packets from sliding around when i rummage in the freezer. Stacking the breast packets between these plates before freezing creates indentations that allows…
Wydruk około 1,47 €–1,79 € nettoWstępna wycena jednego wariantu
Requires: 2x din rail clip: https://www.printables.com/model/161740-din-rail-clip 8x DIN 912 M3x10 8x DIN 934 M3
Wydruk około 2,09 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The vTech Sandy Snacks-a-Lot Axolotl is a fun toy that has 8 plastic “meals” my daughter feeds it, by putting them on its mechanically articulated tongue. There is built-in storage for these in the toy itself, but my little one had…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Handy scoop for measuring cayenne pepper to put in my quart jars for canning beans. Pretty sturdy and functional. Holds almost exactly 0.9ml of water . Nozzle temp is high in g code. I tuned it to 235 after things got moving. Currently…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I'd become bored with measuring the weight of espresso coffee beans on each shot. So I adjusted the size of a cylindrical measure to hold the number of beans that matched the 17g shot I'm used to making. The shape of the measure is to…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was a quick graduated cylinder for use at bath time for making “potions”
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Storage case for Accu-Measure personal body fat tester. Easy print. Use PLA or PETG though PLA should suffice. I added mouse ears in cad program to avoid lifting in corners, snaps easily off when print is finished. Step files added for…
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
👇 See sizing instructions below 👇 Original Tingivese Description This is a remix on ohmg's tape measure holder . Thank you for providing the STEP file! My wife's tape measure had a rivet holding on the metal end, so I had to make a notch…
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
You never quite know how much filament is left on a spool. To quickly and easily estimate this, I created this tool. With it, you can find out in seconds if you have enough filament for your next print. Complete new design here available:…
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
Summary Soft Tape Measure Spool for a 5/8" wide, 5ft long soft tape measure. Super glue end of pin into core. Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.4 Infill: 20% Filament brand: Any…
You never quite know how much filament is left on a spool. To quickly and easily estimate this, I created this tool. With it, you can find out in seconds if you have enough filament for your next print. New design: better readability…
The green mat is 1 meter for scale. You can count frames to determine the speed it you like! The video is at 30 fps like all standard youtube videos. It covered the distance in about 1.2 frames, so it is going around 25 m/s, or 90 km/h. I…
Features: No extra screws or glue needed Supports multiple tape widths and lengths - parametric Fusion 360 file available Pre-rendered versions for 14 mm, 18mm and 22mm tapes (max length ~150 cm) A universal wide slot to fit all metal…
Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting…
This is a remix of Uncle Jessy's Caliper Tool. I add the measurements directly onto the tool to make it even easier to use. This caliper tool makes it very easy to measure to get the perfect size for helmets and other 3D printed armor.…
Note: For a larger version that covers M3-M10 sizes up to 100mm, see my Bike Scruler . For a version of that with metal inserts for the M3-M6 sizes and magnets, see my Etsy store . Quickly sort and measure metric screws and bolts in sizes…
A mount for a tape measure or anything that has a belt clip. This works with multiboard . It uses the peg holes. Print in the following orientation with outside brims on. No need for supports.
This Tool can be used to measure the outerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF
Updates 03/2022: Changed two screw holes on the switch side part to slotted holes (v2.1). This allows you to tune the fit and tension during assembly. 04/2021: Added a "MIRRORED" version, which allows you to flip the PSU around and have…
This handy angled bed scraper is multifunctional with a screw measure tool integrated in the handle. The screw length can be measured in mm and even inches. There are 3 options for the text available: Embossed Text Raised Text No Text…
***** Its a tricky print as the clearences are low, DONT GET DISCOURAGED if it fails ****** A multi-tool. The tool has a pair of pliers, a ruler marked in centimeters and inches, and a protractor. The tool is a useful item to have for a…
I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…
Those designs are a set of rings to measure the size of your finger and see what ring size you are most comfortable with. The files are designed and named after the US chart but you can refer to the ring size chart in the illustrations to…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
There are two versions: one that goes from 4 to 36mm in 2mm steps and one that does that only to 20mm and from there on in 5mm steps - because most metric screws are available in 5mm steps above 20mm. It has a M5 printed thread where you…
A PSU Fan cover/silencer for the Creality Ender 3 Pro / Meanwell LRS-350-24 PSU This model was designed to print the models separately in different colors and fit the embossed letters into the debossed fan cover. If the embossed “GHOST”…
Update 01/13/2025 I have added a teepoon-sized cup (5ml). The Tablespoon is around 15ml so you just need to print the 1/16th cup for this.…
I like this caliper a lot so I added it from thingiverse. Here is a link to the original. https://www.thingiverse.com/thing:1661962 Original Description: Summary this is a wip. i will be tweaking and adding files and information as i go.…
this is a measuring cup cup for when you do not want to do multiplication of division you can just add it
This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…
Here is a set of radius gauges. When I printed the case I moved the slider latch over to the side to allow easier removal of the support material, It worked pretty well. I forgot to mention you will have to move the smaller (2-9, 2-3,…
Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project
Do you need measuring spoons? Here's a set of the most common measuring spoons for you, no support is needed! :) Print instructions Recommended settings: Layer height: 0.12mm or 0.16mm Perimeters: 3 Infill: 15%
Simple attachment to hold a tape measure
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
I have been asked to create a measuring tool similar to my “Inch Measuring Tool” https://www.printables.com/de/model/345844-inch-measuring-tool-for-screws-nuts-bolt-heads-wre So here it is! The dimensions are based on ISO DIN 13. (I will…
Tool for Wood Screws Measure & Sort metric (Mesure de vis aglo/bois) for lengths to 10 to 80 mm and diameters 2 to 8 mm (half-unit 2.5/3.5/…) I've needed a tool to sort my wood screws. Optimized print profiles for Bambu Lab printers…
Updates 2023/08: Updated the handles and the base on the 25 and 50 ml variant (v1.4). The new handles are scaled according to the cup size, are sturdier and look more appropriate. The base has been widened slightly, making them stand more…
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
🌀 Peristaltic Pump (NEMA 17) This is a compact, fully 3D-printable peristaltic pump designed to be driven by a NEMA 17 stepper motor . The pump uses standard 608 bearings and soft tubing, making it easy to build with commonly available…
YouTube Video ( https://youtube.com/shorts/rRwxUmyBnUs ) Overview This model has a top portion that holds one end of the sewing tape measure and a bottom portion that can rotate relative to the top portion. The top portion has a ring that…
Reliably measures saddle height based on the point where the saddle is 80mm wide. I don't know much about bike fitting, and I've never been particularly good at measuring saddle height, so today when I saw Ronan McLaughlin share his home…
I wasn't happy with the standard Mean Well RS-25-5 PSU mount in my VORON, so I made this simple remix of RikersBeard's 😎 RS-50-5 PSU Bracket double-spring clip for this smaller PSU. BOM M3 x 8mm BHC (2 pcs.) Print Settings Use your…
Modified version of the original Measuring tire groove from Lopata_225 . I had a problem with printing the inner part that needs supports. Therefore, I modified the model so this part does not need supports and could be printed with the…
I originally made this for measuring out dog food, although I have included a blank version that could be used for other things. I am also including the Fusion 360 file so that it can be customized, including the ability to easily change…
I designed this PSU cover for the Mean Well LRS200-24 PSU. The model files contain one “normal” cover and one with the VORON Design logo (i originally designed this cover for my VORON v2.4). EDIT: Dualcolor version available
There are 3 models with different attachment types for the Multiboard. It can be used for tape measures and safety glasses. The snap need to be printed with supports. There is also now a thicker version for heavier tape measures Credit to…
I really liked the idea from Boogie for screw measuring/sorting helper but decided to design my own with some of his approach in mind. FEATURES size of a credit card so you can put it in your pocket or a wallet screw sizes M2 - M12 screw…
Print it at 0.2 mm layer height. two colors 10 % infill Grid. Check the model here: https://a360.co/3F0p4nY
If you want to buy new ring and you are not sure with the size this is perfect tools for you to find it. I wanted to avoid different chart conversion so I just made ring with inner ring diameter in millimeters. So for example ring with…
![[REMIX] Rugged box for Bosch Zamo Laser Measue](https://media.printables.com/media/prints/663548/images/5225882_39d18197-5171-412f-9129-d04d28ebab76_f8887cff-ee0e-431b-958d-4d0c448cf769/pxl_20231129_113306422.jpg)
![Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]](https://media.printables.com/media/prints/644202/images/5085947_ae90008e-8660-4752-9160-1b9f4a3444cc_1ea70f13-8190-4920-bd57-67c307f5b7f8/dscf8816.jpg)
