Liczymy pasujące modele…
This is a project I put together as a gift for my niece. I've only made the one and I was super pleased at how well it came out! I used the existing (Totoro)[ https://www.thingiverse.com/thing:12146 ] model by (Joo)[…
We have had this lamp proudly displayed in our home in our foyer for nearly a year now and we get lots of compliments on it! It is super easy to print. This lamp assembles from 12 sides all printed flat on the printer's bed, which then…
Zámek kaslíku Babetta Náhradní díl na moped Babetta 210/215. Babetta Lock Castle Spare part for moped Babetta 210/215.
chtel jsem neco originalniho na nas stromek. hvezda ma 12cm v prumeru. davam sem verzi cele hvezdy a rozpuleny. plosky na lepidlo pro slepeni.
This is the 3D-printed enclosure of my open-source HomeKit camera . This snap-fit enclosure can be assembled without any screws. Hardware Raspberry Pi Zero W Camera Module Camera Cable compatible with Raspberry Pi Zero 5.1V micro USB…
orientační čas tisku cca 4 hodiny tisk jednoho kelímku při 100% rozměrech (69x69x95mm), výplň 20% a 0,20 mm výšce vrstvy (speed) zabere 4 hodiny 3 minuty.
Case for HomeKit project for IR remote old devices (television that doesn't support HDMI-CEC, a speaker set that is connected to it or just anything that may be controlled via infrared remote even an A/C) describe on gitlab link .…
EN: Print a simple tree for your railway, for example, and so on. No support required. Can be printed in multiple colours with a layer height of e.g. 0.2 mm. CZ: Vytiskněte si jednoduchý stromeček například pro vaší železnici a podobně.…
Jednoduchá ozdoba na vánoční stromek, okno, zeď. Simple Christmas tree decoration, window, wall.
Model má dvě verze. Jedna verze se skládá ze dvou částí (podstavec, stromek s hvězdou) a druhá ze tří částí (podstavec, stromek, hvězda). V druhé verzi se musí hvězda přilepit na špičku stromku. Bohužel, nyní nemohu model vytisknout,…
Dummy 13 / Easy 13 / Hirth joints adapted to the D.Va Meka armor. Printing: Layer height .2 mm and 15% infill. Most parts requires support. For the frame parts, print with ABS/ASA/PETG. Do not print the frame with PLA. Canopy: minimize…
The Timekeeper is the well-mannered and disturbingly calm tyrant who rules over the prison planet of Kairos. Obsessed with order, he uses cybernetic implants to watch over and control his citizens. AVAILABLE NOW! Get your copy of…
Use layer hight 0.2mm (include first layer), or 0.3mm (0.15mm). Dimensions is cca 55mm x 40mm x 3mm. You can use glue for hard plastic (Tamiya, UHU…).
Famous finnish Marimekko Unikko cookie cutters 3 kind cutters. you can scale how you like but increase Z height if you make it smaller than 100mm wide..
For the more skilled soldier of the empire, the mek'leth favors skills of speed and dexterity over strength. Designed in Fusion360 (this was a new type of designing for me and I am proud how it came out). I printed this in PLA with a…
I am looking to grow my new channels! Give me a follow on youtube and mastadon and please feel free to say hello :) https://www.youtube.com/@homegrown3dprint https://mastodon.social/@homegrown3d Changelog: 3/14/22 refined eye cover area a…
a JIG inspired from the already not available JIG SV 45 from Tormek, as they replaced it by the new KJ-45 JIG, proposing a better centering of the knife and as a consequence a symetric angle of sharpening for both sides. However, offering…
A remix of the drip tray for Tormek T8, but customized for using with the FVB attached. Made 2 versions of it, one that is optimized for PETG and one for PLA - difference being the diameter of the holes that clamps ontop of the rods from…
Nothing fancy, simple, and it works great. Holds 4 ounce plastic cups, associated lids, and mounts to your fridge! I've also added a 2 oz version (identified in file name)! No support needed Single print (only need to insert 2 magnets in…
Prusa MK4 like Frame Upgrade kit. All parts were milled from a cast aluminum plate, as this material is great for making warp-free parts. - main frame 14mm aluminum - front, rear, printbed frame 8mm aluminum
Updates: Sept 06, 2023 There was an error in the thumb cluster PCB where the navigation switch was lacking its common/column pin and was tied to ground - resolved on GitHub for the KiCAD and gerber files. If you have an older PCB, you can…
Zámek na terarium (sleněná posuvná dvířka) --- Terrarium (glass slide door) lock
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Tired of boring fasteners on your cardboard space station? Optimized for grip & looking…
Mushroom Fairy-House for Christmas Village // I recently found this cool design Xmas-Tree Fairy-House for Christmas Village by @Allpa and I wanted to make something that will fit this style. It is perfect for an LED tea light so that the…
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! This model was designed by Dany Sánchez . Bab El-Mansour is a grand gate in Triumphal Arch style in the Moroccan city of Meknès ( bab means doorway or gate in Arabic). It is the most important and…
Tormek T-4 Rotating Base Tormek sells a rotating base for their sharpening system for $70, which I guess is reasonable if I had any money left over after buying all the damn accessories for this thing. Couldn't figure out how to print…
Printing: Main Gouge Clamping Body - 40% infill or higher, print on flat backside Lower Hinge Post and Assembly - 75% infill, 10mm brim, print vertically Main Clamping Body - 40% infill Horizontal Base - 20% infill Follow JL Designs…
This is a remake from a game rip. Took it all apart so that it was printable and re-meshed most surfaces to make it look good. Uploaded Body 2 that goes to Controller 2. Slightly different controllers. Includes decal set. Enjoy. Print…
Hey everyone - here's my proxy model for Meka Dragon, from King of Tokyo! This guy is the sixth and final core kaiju from the game, so the set is finally complete! As always, the .blend file and any pre-supported .3mf (including the one…
Christmas tree with base Decoration The scale of the tree is made according to the intended used Christmas ball with diameter 60mm. The wall thickness I usually use is 1,5mm which is enough to be stable by using 60mm Christmas ball as…
You can use it as a vase, pen holder or flower pot. Print instructions Use a vase mode. :)
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
A ruler to adjust USB height to Grinding wheel. Instructions for use: Put it between grinding wheel and housing, the small part against the spacer, letters against the wheel, adjust to preferred height. Done! The advantage of having the…
The default skin for D.Va's Meka in Overwatch. v3 Fixed, thickened, symmetrical and ready to print! Some of the detail is lost in the process, but at any scalle less than 30cm you'll probably not notice. Some sanding and pick work will…
Tato velikost náramku je vhodná pro menší/úzkou ruku. Pro větší ruku je potřeba trochu zvětšit průměr. Tištěno v PLA, tryska 0,40 mm, vrstva 0,20 mm (Prusament Galaxy Black).
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Mario inspired, Kamek , Tabletop DnD miniature 25 mm Medium base which can be used for DnD and other Tabletops.
I created a water drip tray for the Tormek T4. The tests showed that it works. Easy to print as it consists of two parts
Vytiskněte z PETG nebo ASA se zapnutými podpěrami (viz přiložený 3mf soubor)
You need a M6 bolt for this knob! Note: If the handle is used for a original Tormek sleeve, an ~M6x9 V2A screw is required If you use it with my own designed Plastik sleeve, an M6x12 V2A screw is required My sleeve:…
My "pointer" was damaged by the grinding wheel. So it wasn´t very accurate any longer. So I printed this spare part and it works as intended :) You need a short 4mm rod as axis. Simply take a wooden rod or brass like i did. Print Settings…
Modified impeller design, airflow velocity maintained while reducing drag to allow easier spinning. Central post also slightly modified to help prevent the impeller from striking the case. No modification to Tomek's turbine blower needed…
Upgrade: v1.3 - verze bez knihovny BOSL2 v1.2- Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html
This is my own design of a leather honing wheel. If you have the Tormek T8/T7 drive wheel it will fit. You can Upgrade your old SA-250 or Supergrind 2000 Versions with the original T8/T7 drive wheel as well! Alternative you can drill out…
Lehká, vzdušná ozdoba na stromeček, kterou si za cca 30 minut vytisknete doma. prusai3mk3s Print instructions Vytisknuto: Original Prusa i3 MK3S +, tryska 0,4 mm, PLA, vrstva 0,1 mm. Já použil vlákno: PLA Galaxy Silver, ALE DOPORUJI…
Small and simple grindstone holders for Tormek stones. There are 3 different versions: 250mm: high: 140x120x30 mm 94g / 20% low: 139.4x110x25 mm 79g / 20% 200mm: low: 120x100x25 mm 59g / 20% The original version is the high profile…
spacer for tormek (all models) tipicaly used for woodturning
This is a simple jig to enable sharpening of router plane blades using the Tormek sharpening system. I also offer some other jigs for hand sharpening of router plane blades . It's designed for cutters that have a square cross section that…
Remix of the Tormek Drip Tray for FVB from @Leapstep_261016, this remix has space for the big round nuts used to level the attachments. The design is based on Drip Tray For T7 / T8 In Connection With Vertical Front Base » Schleifjunkies…
Christmas tree with base Decoration The scale of the tree is made according to the intended used Christmas ball with diameter 60mm. The wall thickness I usually use is 1,5mm which is enough to be stable by using 60mm Christmas ball as…
Note that this is for skewed chisels (as used by woodworkers for cleaning out dovetail sockets etc), not skew chisels (as used by woodturners). Skewed chisels ( like these ones ) have a single bevel at a steep angle and make it much…
Ozdoba na vánoční stromeček ve tvaru stromku.
Jednoduchý strážní domek / závorářské stanoviště / vechtr Měřítko Z 1:220 Krytinu střechy tiskněte s šířkou 52 mm (bude i tak k zastřižení, ale měřítko bude cca sedět.
Video of this project working: This enclosure is intended to hold a PN532 NFC reader along with a Raspberry Pi Zero 2 W for the purpose of reading an Apple HomeKey to unlock or open a door. I'm running the software found here and…
This is an extension of the water container so that you don't have to spill so much water when grinding. When all parts are printed glue them together.
Extension for Hamilton Beach Dehydrator Model 32100A or the Westside GameKeeper model mentioned in the Makes. 258x330mm tray fits most 1kg filament spool as well as larger food items, mushrooms, and flowers. No supports needed! Print…
The original SVA-170 from Tormek is great for hatchets and small axes, but doesn't allow for bigger axes and splitting mauls. That's what this is for The photo shows a comparison between the SVA-170 and the first iteration of the model
Držák kuchyňských papírových utěrek s vnitřním průměrem cca 65mm, doplněné o design Marimekko. Doplněn díl pro pojištění proti otáčení nosičů role. Tisknout v originální pozici s podpěrami. Big kitchen towels roll holder with Marimekko…
This is a set of mounting brackets so you can hangs the DBS-22 Drill Bit Sharpening jig from the wall There are 3 parts One for the base plate One for the drill holder One for the magnifier
Horizontal Base for different wet grinders like Tormek. After print you need: -4x V2A countersink screw ~M5x20 -4x V2A washer M5 -4x V2A nuts M5 -2x V2A nuts M6 -2x knob screw with V2A M6x12 -Superglue -maybe you need a 12,5mm drill to…
Zámek a klíč. Tři druhy. Vhodné pro activity board. Lock and key. Three types. Suitable for activity board.
I created a drip tray for my Tormek T-4. This collects water that drops off the blade onto the top of the machine and drops it back into the stone wheel water tray below. I made the model to be printed with no supports. I made this with…
You can grab a code and get more info about the project here https://github.com/Andryushik/shades_homekit Print it with a minimum 4 walls and supports. I used ABS+.
Zámek pro systém French cleat. Delší zámek má délku 65 mm, kratší 45 mm. Hloubka zámku je 11 mm (používám desky tloušťky 12 mm). Díra je připravená na vrut průměru 4 mm. Vrut nedotahovat (nešlo by hýbat zámkem). Blíže na:
Drážky na matky M8 hloubky 6,5mm.
Potřeboval jsem cedulku k parkovacímu místu a tak jsem vytvořil tuto. Je vytvořena tak, aby bylo možné po vrstvách měnit barvy filamentu, přikládám hotový GCODE v PLA. Barvy jsem měnil v pořadí bílá, černá, modrá, červená.
se uso una boquilla de 0.4 altura de capa 0.20 mm relleno 15% activar soportes (huecos)
Es el cetro de Kamek, del universo de MarioKart8. Su longitud son unos 35 cm. Se a dividido en 4 partes con piezas de union, tienen una tolerancia de 0,2 y encajan a la perfección. Se deben imprimir 3 copias de las piezas de union. La…
Storage fixtures for Tormek jigs on IKEA Skadis peg wall system KJ-45 Centering Knife Jig KJ-140 Wide Centering Knife Jig SVM-00 Small Knife Holder SVX-150 Scissors Jig SVA-170 Axe Jig SVS-38 Short Tool Jig SP-650 Stone Grader WM-200…
Tormek T8 Knife Sharpening Jig - 15° Angle with Magnetic Holder Description Upgrade your Tormek T8 setup with our precision-engineered Knife Sharpening Jig. Designed for a consistent 15-degree angle, this jig ensures razor-sharp edges for…
A replacement knob for the Tormek sharpener knife holders. This is a bit thicker than the original with a little bit larger support base. The threads for the lock screw are printed but needed a bit cleaning up with a tap for the screw to…
This jig can be used to measure projection length when working with the calculator method on a Tormek or similar grinding machine. Example calculator: https://connect.calcapp.net/?app=3fp8xu#/ The jig is designed to work with the Tormek…
Vánoční ozdoba připravena jak pro 3D tisk tak i vyřezání laserem.
I kept running into the stone of my Tormek T-7 every time I needed a hone something on the leather wheel (knives, long blades etc.). This spacer lets me take off the sharpening stone and and just use the leather honing side uninhibited.…
HomeKey was recently reverse engineered, you can find a link to that here: https://github.com/kormax/apple-home-key-reader I needed a case to mount outside my home and I couldn't find one that looked clean enough so here's my take on it.…
The nut on the Tormek grinding stones is fairly special: M12 2 flutes / splines 4mm pitch (!) This is a perfectly fitting spare/replacement part, should you need one.
Print & acrylic draw!
Sur une affuteuse Tormek, il faut bloquer l'axe pour utiliser le disque de démorfilage sans la meule (par exemple si elle gène). Pour cela, Tormek fournit un bout de tube facile à perdre… Cette entretoise est sur mesure pour les Tormek T7…
heres the original Ripster body that i cut down to make it a little more aesthetic
Comment transporter un système d'affutage Tormek T-8 dans un Systainer de Festool ? L'affuteuse n'est pas vraiment faite pour être transportée (15 Kg), et n'est pas un outil Festool. Et pourtant, ça rentre. C'est très juste, mais ça…
Dělený na 6 dílů 55x95x118, váha 68g , tisk 5 h. Dělený na 4 díly 55x95x118, váha 55g, tisk 4 h. Dělený na 3 díly 55x95x118, váha 50g, tisk 3,5 h. Dělený na 2 díly 55x95x118, váha 40g, tisk 3 h.
Distances made for use with TormekCalc, (by Jan, JVH on Tormek Forum) I made 4 of them, 30, 50, 75, 100 mm in length. If you want to print them with numbers, use split to parts and assign colors, or use as is if you print them solid one…
These Gu dessert pots are delicious, and the glass ramekins they come in are too good to throw away. If you're like me, you've got a unrespectable amount of them in a cupboard somewhere. Have you ever tried stacking them? Nightmare. Time…
Leather Honing Wheel for Tormek T4. You need: Natural Leather ~500mm x 25mm x 3mm Glue: Superglue, Epoxy or Siliconglue etc… Sandpaper ~#100 to roughen the surface of leather and disc Sharp knife to cut the leather Triangle ruler
Jednoducha krytka na FABku Simple door plate for FAB (or commonly used in Europe) lock
I bought an Eve Door & Window HomeKit contact sensor. It comes with a few spacers to align the smaller with the larger part of the sensor, but unfortunately they didn't add up to enough distance for our particular door. This part provides…
This model uses 1/4-20 Bolt and nuts. ~2" of bolt or so works well. I usually print on the side with organic supports. 15% Gyroid Infill.
Drukuj: warstwa 0,2mm grubość ściany min 2mm wypełnienie kratka 30% Grubość dół 2mm, góra 2mm. Ściski służą do klejenia ramek o dowolnych wymiarach. Ogranicza nas tylko długość śruby gwintowanej:-) Potrzebujemy 4 szt śruba gwintowana M8 i…
Vánoční dekorace vzniklá v rámci hodin 3d modelování, autorem je náš student Rosťa. Do stromku se dá vložit LED čajová svíčka. Christmas decoration created by our student Rosťa. Uses a LED tea light.
Kamek. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
UPDATE: now segmented in parts so that it can be coloured in your favourite slicer easily Bring a quiet corner of a Christmas village to your shelf with The Starlit House, the cottage at the heart of Winter Tales by Flavora Studio. A…
*SI ESTE MODELO OS GUSTA UN IMPULSO PAR APOYAR MIS MODELOS SERIA AGREDECIDO :) *AQUI TENEIS MI MODELO DE DRAGON BALL DIORAMA PLANETA NAMEK ! LO PODEIS ESCALAR A LA MEDIDA QUE QUEREIS. QUE LO DISFRUTEN ! 1 color 0,2 mm de capa 2 paredes 5%…
vykrajovátko těsta ve tvaru stromečků
Mekaneck is a fictional character from the popular Masters of the Universe franchise. He is a member of the Heroic Warriors, with the ability to stretch his bionic neck to great heights and see over great distances with his special…
Impeller for a Kolmeks AP-32/2 pump, 130 mm in diameter. I made it in two versions: Solid impeller. Two-part impeller I’ve attached both STL and STEP files.
Its a new better version of my other XB-100 alternative modell. Now you can use the original Tormek holes. The original 4.8mm holes must be drilled to 5mm. You also need: 2x V2A M6 nuts (Muttern) 2x V2A ~M6x15 screws with handle 4x V2A…
![[Tormek T4] Water chute (side) // Wasserablauf Rinne für Seite (V2)](https://media.printables.com/media/prints/1f7bfad3-843a-4a91-b3c9-5246e7433d2c/images/9927319_fb942a56-a775-4c31-9230-e56c82e9fc65_9925a01a-f402-4f82-9404-6926f8efc15b/img_8524.jpg)
