394 modeli
I am Love to printing with Prusa Mini. And I was want to some accessory for Prusa Mini bundle USB memory. But I can't find it. So I create it. I'de designed Prusa Mini usb memory cover and it is very simple and easy to print. I figured…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[ENG] Money or memory card case (wallet) the size of a credit card suitable for carrying in a wallet among other cards, or as a small wallet suitable for pockets and small handbags. The case is secured against spontaneous opening by a…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
MEMORY BOX, USB, SD, MICRO SD Organizer. Capacity 6 SD, 3 Microsd and 10 USB. Print box lid upsidedown.
Wydruk około 3,87 €–4,73 € nettoWstępna wycena jednego wariantu
[ENG] Case for credit cards, money or memory cards (wallet) suitable as a small wallet suitable for pockets and small handbags. The case is secured against spontaneous opening by a small latch. To open it, the top of the cover needs to be…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
It's a simple Cover for memory to send it via postage or transport it. Layer-Heights: 0,2mm Filament: PETG (maybe PLA is possible, too)
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Scad file for creating a USB stick with Customizable Text Print instructions I have printed this with PLA and PETG, with a 0.40mm nozzle. I recommend 90+ percent infill to make it heavy, it is too light otherwise.
Wydruk około 5,15 €–6,29 € nettoWstępna wycena jednego wariantu
2 x USB 2 x USB-C 5 x Micro SD 5 x SD
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A screw type stackable system for memory cards. It contains CF, CF-A, CF-B, SD, a mix CF-A+SD. I don't own CF type B memory cards so they are not yet tested. Please send a feedback if it needs to be adjusted. I'll probably make a smaller…
Wydruk około 5,62 €–6,87 € nettoWstępna wycena jednego wariantu
A simple storage for memory cards for Playstation 1 and 2 Space for 7 memory cards nothing special, but at least the cards don't fly around anymore ;) The Playstation logo is a trademark of Sony
Wydruk około 1,08 €–1,31 € nettoWstępna wycena jednego wariantu
INTRO: The printed model shown in the photographs is Version 5. It works, but I didn't like the placement of the SD Cards on the side. It made it difficult to remove the XQD Cards when there were SD Cards in the container. Version 6 has…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[ENG] Small travel memory game (2x8 cards) that can be stored in a matchbox. In case of no matchbox, a single matchbox of the corresponding size is included. The printable pexes file is set up as two-colour using filament replacement…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
[EN] A simple credit card shaped case for SD cards and other small items that will keep your cards from flying around your wallet. Two cover options are available - plain without writing - with the inscription "prusaprinters.org". This is…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
3 x USB 3 x Compact 3 x Micro SD 3 x SD
Wydruk około 2,16 €–2,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The text fit in the whit part of the polaroid picture, there is a lot of possibility of text. the only issue is that it need support because it can't be print like the original.
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
My teacher wife wanted to have a memory game for the kids which she can reuse with customizable paper prints. Thats what came out. The paper square must be a maximum of 4.8 x 4.8 cm. Maybe a bit smaller due to tolerances. On my MK4 it…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
I created a custom expansion memory card adapter for the MacBook Pro, designed to integrate additional storage up to 2 TB. This project involves soldering a microSD card to PCB that fits into the MacBook Pro's SDXC expansion slot. Once…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Hello, friends. I created a design organizer for usb/memory cards.
Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu
Card holder for the Milton Bradley "Memory" card game. Thin walls to speed prints and reduce waist. PETG print held up to grandsons well.
Wydruk około 1,71 €–2,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the card as possible, a support on the back to help…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
If you like my designs, please feel free to use the “Donate” button now here on Printables, even a dollar is greatly appreciated! July 3 2023 NEW LARGE version! More room between slots for ease of fingers to grab! Plus 16 slots total…
Print vertically, hole pointing downwards. https://youtube.com/shorts/DYX5YIN_WNI?feature=share
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7eKViH8MW06 Out of necessity based on Mburr cover. be careful to remove the support its a 0.40 seperation above and below. Support integrated. no support…
Remix of the excellent Rugged Box for storing up to 16 PlayStation 1 or 2 memory cards, or whatever else fits. Note that the box with slots is designed to fit the original OEM style card. So it may not fit all 3rd party memory cards, like…
If you are a Senna fan like me, this model is for you. This model consists of many parts. You can print each one in separate colors and combine them easily. You only need to apply a color change on the part with the Senna signature.…
A remix of "USB SD and MicroSD holder for wide USB sticks" by Lalo_Solo ( https://www.thingiverse.com/thing:2637487 ), with added tray for caps and other stuff.
YJ board CH341A Serial/Memory Programmer Enclosure YJ board CH341A Pro Serial interface / Memory Programmer Case with exposure of ZIF socket and DuPont connectors. The enclosure holds the board snugly. Led Light pipes optional part but…
Another case to turn a DigiSpark Attiny85 into a (fake) USB stick (or just a nice enclosure, that's up to you ;-) ). This one features a consistent hole, which allows attaching it to a key ring or some kind of tie. There are also two 2 mm…
Based on djkrice organizer for SO-DIMMs. Fits 10 DIMMs, can fit more if you edit the .scad (it also has the measurement for SO-DIMMs). Can be stacked. The honeycomb pattern on the bottom is to save filament without being detrimental to…
Storage box for 8 desktop RAM modules (DDR5, DDR4, DDR3) with lid. The lid can be easily lifted or placed on top – there is no locking mechanism. The model comes without any labeling. Labels can be added as needed using Bambu Studio. If…
Simple PS1/PS2 Memory Card Tray/Holder
Design Concept The bust captures the iconic and recognizable appearance of a famous wrestling personality, designed with detailed musculature and clothing accessories like a bandana and chain, reflecting his stature and style. Purpose…
A remix of thing:3857470 - agree with some commenters it would be nice to have a memory card slot somewhere on the unit, so we cobbled something into that bottom-right tray area. We like the slot designs of thing:5291498 so we used those…
This is a holder for 3 or 4 Original 8MB PS2 Memory Cards (Magic Card)
Tidy up your memory stick drawer and put all your SO-DIMM modules in one place. This SO-DIMM case holds 12 memory modules and even comes with a lid! Use with 30MM height (DDR2, DDR3, etc.) modules (or stretch the model a bit in your…
Playstation 1 - PSX memory card shaped keychain Have fun creating different ones in multiple colors If you like my projects follow me and I will do my best to always create new and interesting things
I printed these in 0.3mm height all in one go - which took around 4 hours to complete a full set. Result snaps together perfectly, and holds the MC's in place for easy storage. Enjoy! Update 3/4/2021 I have Added Extension pieces you can…
Simplified, "working", neuralizer from Men in Black. The idea is that you could replicate this project using anything from 1 hour (+ printing time of around 6 hours for a 2mm layer 0.4mm nozzle print) to a couple of days, depending on how…
The exposure memory lock button for the Nikon F3 SLR film camera. These things are known to break and fall off the body.
Place a Sony Memory Stick Pro Duo into the recess label side up, then carefully slide into a Memory Stick device. Remember that it's likely an original Memory Stick device can't take the largest capacity >2GB Pro Duo cards.
This was modeled to the original Gamecube design. It may not be the easiest to print because of that. I printed with the shaft vertical as I wanted this to snap into the original location and revolve freely. Supports were used with a…
Holders for SD, mini SD and micro SD cards (Gridfinity, stackable and labelled) There is also a collection of battery holders with similar design. Credits: These works were based upon: Zach Freedman's initial designs of Gridfinity.…
This is our new 3D-printed lithophane picture box model! You can add your favorite photos and memories by converting them into lithophanes and adding them to the picture box frame. These work great as personalized gifts, or are a unique…
Designed to be a quick print aid for children learning their multiplication tables. Has a slide door so the answer is not given right away. You slide the door down to reveal the answer. Its a good guess/check method very much like a flash…
The Memory Pak stl available didn't seem to fit quite right, and was pretty low poly, so I rebuilt it from scratch in CAD. Step and Fusion source files available.
Custom version of the Digispark attiny85 BadUsb fake usb memory case. https://www.thingiverse.com/thing:2347216/remixes Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12mm Infill: 20…
DIMM blanks are used to fill unused memory DIMM slots in a rack-mount server. Filling these slots helps to ensure that airflow through the server from the fans is directed as designed, optimizing cooling. Included are DIMM blanks…
EDIT 26Sept2026: A similar one color model requires no supports: https://www.printables.com/model/1847880-cosplay-in-loving-memory-urn-with-screw-on-lid-v2 This urn was designed with cosplay in mind, not the ashes of a loved one. The wall…
I remixed this from a different design that I found on Thingiverse (https://www.thingiverse.com/thing:46335), and made some mods which I consider improvements for my use, and thought others might agree. To see actual prints of my remix,…
The PS2 is region locked so it is not normally possible to play discs from outside your region, or burned discs (often referred to as backups). It is possible to counteract the region lock by disc swapping using a utility such as Swap…
Tidy up your memory stick drawer and put all your DIMM modules in one place. This DIMM case holds 12 memory modules and even comes with a lid! Note: Some DIMM's with large heatsinks may not fit properly. The lid is optional to accommodate…
2023.07.20: added components list. 2023.06.28: adjusted eject/reset/open buttons to more easily fit in their spots and play better with their surroundings. Corrected fit for entire shell with controller ports, modified bottom shell to…
Arduino DS3231 ZS042 AT24C32 IIC Module Precision RTC Real time Clock Memory mount. V4 has 2.75mm holes and V5 has 2mm holes Category: 3D Printing
Printed with a .2mm resolution with 20% infill. No supports needed.
Build a prop replica of the Memory Gun from the Gravity Falls TV show. Powered by the Feather PropMaker RP2040 and CircuitPython, this 3D printed prop lights up and plays blaster sound effects! Learn Guide: Code and assembly tutorial…
Печатал из ABS слой 0,2 как на фото с поддержкой, т.к. по другому ломается по слоям
Purpose. I'm quite satisfied with the C001 Micro SD card holder and case at home but I found that it is too big and heavy for bike touring trips where small size and weight are really important. So I designed an extremely slim and compact…
Prusa Mini usb memory cover Original Model by Alex Kang I turned it so that it is readable when plugged in
The memory modules fit in two slots. A sliding lid secures the modules in place. The modules can be wrapped in a think cellophane bag to ensure there is no movement if shipping. The box is 79mm x 76mm x 9mm. Print the bottom with supports.
Jelikož při fotografování používám různé fotoaparáty, které potřebují různá paměťová média, vytvořil jsem box na náhradní paměťové karty mnou používaných typů - SD, CF, QXD. Celý box je tištěn najednou včetně pantů. Vše bez podpěr.
I was using a piece of a 2x4 for holding up my radio at the right height. I decided to make a 3D printed stand with different height's so others could adjust them to their view. I sometimes record the audio and the radio settings, so with…
Replacement part for a broken or lost Wii memory card slot cover/door.
Playstation 1 and 2 memory card CD case storage With or without text Please check the internal size of your cd case Model size 138.5mm x 118,5mm x 7mm
Features Compact closed dimensions: approximately 61.4 × 51.2 × 6.4 mm, including the hinge and opening tabs. Print-in-place hinge: the lid and base print together in the open position. Integrated snap closure and side guides to limit…
A peaceful and heartfelt memorial statue designed to honor a beloved dog. This model features angel wings, a seated dog, a small urn with a separate removable lid , and a recessed holder for a tealight. Perfect for creating a warm…
This is a recreation of a silver tetradrachma coin , representing the owl of Athena with the Greek inscription ΑΘΕ, meaning ‘The Athenians'. It is believed to have been issued around 479 BC following the Greek victory over the Persians.…
Remix of PS1/2 holder, 4 card version. Slimmed down the model to fit GameCube memory cards better.
it took me some time to get the error out of this file but here it’s. I made this as a 100mm wide patch. that is best printed with a 0.2mm nozzle. but if you like to print it bigger then use the scale option in cura and leave the Z at…
A peaceful and heartfelt memorial statue designed to honor a beloved cat. This design features angel wings, a seated cat, a small urn with a separate removable lid, and a recessed holder for a tealight, bringing remembrance and light…
thin cover for the bundled Prusa Mini USB Memorystick (with keyring). Gives a 'chunkier' feel to the memorystick, brands it, and also stops the keyring rattling against whatever the surface is placed on (should you decide to refit the…
Gridfinity-compatible memory organizer designed for efficient and secure storage of SD cards, MicroSD cards, and USB memory sticks. This versatile design includes dedicated slots for USB Type-A and Type-C devices, as well as provisions…
A set of 38 unique pieces (each to print twice) to create a game of memory for children. Mix the tiles, place them face down and look them two by two until you find a pair. If you find a pair, play again! The player with most pairs wins.…
Organize your memory cards. Made it low profile to fit through my top drawer
Memory card box. Suitable especially for practicing vocabulary. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 mm Infill: 20 Filament: Prusament PETG, PLA Black Category: Learning
This is a solution to organize and protect laptop ram memory. Print instructions Print it with any settings. File type 1 has 10 slots File type 2 has 15 slots File type 3 has 20 slots
Yet another memory card holder, I have modified an original design I found by a thingiverse user (Gioca72) thanks to him for the original. I have made it longer and have add some slots for the older XD memory cards. Also changed the USB…
Introducing the "Memory Lantern" – Illuminate Your Cherished Memories Illuminate the cherished memories of a loved one with the Memory Lantern, a beautifully designed keepsake that not only enhances your decor but also keeps your precious…
This is fully functional adaptation of the remarkable Memory Orb for 3D printing. The original build thread can be found on therpf.com. www.therpf.com/showthread.php?t=289943. Please find details there. video:…
Pexeso / memory game značky aut/ car logos link: https://cad.onshape.com/documents/f0b4f2b6a03911771128d79f/w/ed5f697b9
I tried every SD card holder I could find and I didn't like any of them, so here's another one. The cards rest in a little tray and a sleeve slides over them.
Remix from Berti2k 4 diffrent with .308 cartridge in the front and 11 standing around. Fox Moose Deer Wild Boar Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Hobby
This is a 3D model of the board used for the Corsi Block-Tapping Test, a widely recognized psychological test for assessing spatial memory and short-term memory capacity. The board features a grid layout with raised blocks, designed for…
I am thrilled to present the "PS1 Memory Card Hard Case," a 3D printable STL model that I have created to protect your precious PlayStation 1 memory cards. This model is available completely free of charge, allowing you to conveniently…
Print with supports for skadis peg hooks I noticed minor lift on one corner when I printed without a brim. should not be an issue if you have a clean plate and appropriate temp controls.
My grandfather was always meticulous about his lawn. My grandfather was known for being strong, dependable, honest and loyal. He was well known for arriving at least 30 minutes--more often an hour--early for any planned event. He was…
A detailed model of a normal SD memory card for designing purposes. Category: Model Furniture
"Memories" SD, Micro-SD Card and Thumb Drive Caddy Print Settings Printer: Ender 3 Rafts: No Supports: No Resolution: Normal Infill: 20 Filament: 3d Solutech PLA Orange Post-Printing ============= Category: 3D Printing
I designed this to hold my camera and flash batteries with SD cards in one case.
✅ Description This is a 3D-printed organizer tray designed to hold up to 18 DIMM RAM modules . Ideal for technicians, PC builders, hardware testers, and collectors, this tray keeps your RAM sticks neatly arranged, protected, and easy to…
If you are looking for a safe storage solution for your NeoSaveMasta memory card for your Neo Geo, look no further! The NeoSaveKeepa was specifically designed to securely hold the NSM in place. The NeoSaveKeepa is ONLY compatible with…
If you are tired of having your Neo Geo memory cards or Amiga PCMCIA cards just laying around in random spots, then this is the print for you. Has 3 slots in the top to accommodate cards from either platform. I have uploaded 2 version:…
Dual purpose! Cap to keep stuff out of the memory card slot on your SuperTrickler. Tool to remove the card from the slot by using either short side to push down on the card to pop it in/out.
I designed a CFast Holder for my workplace. I found only CF-Card Holder in the inet. This is my design in three colours to different between new cards and programmed cards
Enough space for 9 USB-A device, 7 SD cards, 6 Micro SD, and 7 USB keys with cover of different sizes. Width: 100 mm Length: 155 mm Height: 24 mm
A detailed model of a normal SD memory card for designing purposes. Category: Model Furniture
Replacement case design for the Interact/Datel V-MEM Virtual Memory Card System for the Playstation. The V-MEM was memory card system that plugged into the expansion port on the rear of the Playstation console and featured 60 memory cards…
Adaptateur de rangement UMD memory stick et micro sd uniquement pour psp 1004
1:1 replacement for the Gamecube Memory Card 1019 Shell. Please note that all memory cards (59 / 251 blocks) have a different internal composition so this one only fits the original white 1019 block Memory card. But could be adapted, let…
Print in whatever material you like and I suggest at least 2 walls and 10% infill. Holds 8 SD Cards, 5 USB Drives, and 12 Micro SD Cards.
This memory game is perfect for two to six players, kids and adults alike. It comes with a board, dice, and 24 peg pieces in six colours. Not only is it fun, but it also helps players learn about colours, counting, teamwork, and hand-eye…
Super compact container for laptop DDR memory modules - 27 pieces. Perfectly fitted for standard memory modules, a very simple print. Very tight tolerance of 0.1 mm. The lid should be a press fit with a properly calibrated printer. If you…
