P
PrintablesFranspai
Netgear GS105 switch rack mount for the microlab
The tolerances are a bit tight so you might need to sand it down a bit.
Wydruk około 2,21 €–2,71 € nettoWstępna wycena jednego wariantu
- Pobrania
- 39
- Polubienia
- 8
- Ocena
- 0
Wyniki wyszukiwania: microlab
42 modeli
P
PrintablesCB4D
Microlab - Mini Modular Home Server Rack
Version 2 is here! Meet the Microlab —a super compact, fully 3D-printable homelab that’s perfect for self-hosted tinkerers who love big ideas but small footprints. At just 5 inches wide and a tiny 160x160mm base, it’s even smaller than a…
- Pobrania
- 2130
- Polubienia
- 945
- Ocena
- 4,94
P
PrintablesCB4D
Microlab 2 - Mini Modular Home Server Rack
Microlab 2 — Modular 3D-Printable Mini Homelab Microlab 2 is a fully modular, open-source mini-rack system designed for makers, homelab enthusiasts, and anyone who wants a compact, customizable workspace for electronics or servers. Unlike…
- Pobrania
- 358
- Polubienia
- 102
- Ocena
- 5
P
PrintablesPete
Microlab - Mini
Trying to get Noctua colors used esun pla+ brown and Paramount 3D PLA (Skin - Fair Complexion)
- Pobrania
- 129
- Polubienia
- 33
- Ocena
- 5
P
Printables42Computer
42Computer's Additional Parts for MicroLab (Original model by CB4D)
This is a collection of extra parts by 42.Computer for the “Microlab - Mini Modular Home Server Rack” by CB4D. The original design is very useful so I thought I'd be a good community member and contribute any parts I design for my own…
- Pobrania
- 110
- Polubienia
- 11
- Ocena
- 5
P
Printables008 LAB
MICROLAB IMPERIAL STYLE SIDE PANEL
Wanted an imperial style side panel for my microlab i built. came out just as i wanted it too and looks great with the soft glow of led lights illuminating from within. Removed material in the blank areas to speedup and save filament. I…
- Pobrania
- 78
- Polubienia
- 8
- Ocena
- 5
P
Printables008 LAB
MICROLAB CABLE CHUTE & CLEARANCE PANEL
Microlab rear 2U panel with extra protrusion to allow for both cable clearance and cable entry/exit at the rear of the unit. Microlab design is great, the customisable modules work great! REQUIRES BRIM (i used 15mm brim with 0.05object…
- Pobrania
- 69
- Polubienia
- 7
- Ocena
- 5
P
Printables008 LAB
MICROLAB - RASPI 3B+ 0.5U PANEL
Couldn't find a raspi 3b+ plate, so modelled it up and put it up here for you all. Print profile has a modifier for 6 walls & hex infill to allow for airflow around the pi.
- Pobrania
- 57
- Polubienia
- 7
- Ocena
- 0
P
PrintablesConargle
Microlab RPi5 1u + Pimoroni NVMe Duo Base Compatible
Now you can fit a Pi5 with the Pimoroni NVMe Duo Base!
- Pobrania
- 45
- Polubienia
- 6
- Ocena
- 0
P
Printables008 LAB
MICROLAB 2x LAN/ETHERNET CABLE GUIDE
I didn't like the cables running through, around or under the microlab, and then realised i hadn't used all the threaded holes around the side. So here it is, a cable organiser to guide (in my case) 2 ethernet cables around the side of…
- Pobrania
- 42
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPeter
Microlab - Modifications and Addons
Addons and modifications for Microlab for my setup Tray for Raspberry Pi 4 - 0.5U with inlet for USB cable to power Cudy network switch Tray for Kamrui AK1Plus Tray for Cudy 5-port network switch Top Cap modification for handles + handles…
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTurtle
Microlab Zimaboard Tray
A merging of bigbluealien's and LvL_Dani's designs to fit a zimaboard on CB4D's Microlab. The tray is 1u and there is a little over 10mm of clearance from the back panel. Design 1 is centered but limits PCIe expansion compatibility,…
- Pobrania
- 32
- Polubienia
- 6
- Ocena
- 5
P
PrintablesConargle
Microlab 2u 4.3" Screen flush mount
I saw Djkleric's make with a screen and wanted one myself. His uses a 5" screen but i didn't like how it's slightly inset and couldn't sit flush, so i went for this smaller Waveshare 4.3" panel instead. All data and power is through the…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLeon Brocard
Microlab thick foot
I love CB4D's Microlab - Mini Modular Home Server Rack . It comes with a "Feet-Edge.stl", but I wanted a slightly thicker foot so it wouldn't sink into my carpet. So I modelled one. It's an easy print without supports. I used OnShape to…
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCheeseburgerock
Microlab FCxxx speaker amplifier undertable mount
This is the speaker amplifier underbench mount that comes with Microlab FC361BT, FC550, FC660, FC360 and may be other.
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesVic
Microlab NinoTNC+Pi Zero tray
This design can hold Nino TNC and Raspberry Pi Zero in a single tray. This tray fits https://www.printables.com/model/1173286-microlab-mini-modular-home-server-rack Mounting: NinoTNC - M3 Screw Raspberry Pi Zero - M2.5 Screw
- Pobrania
- 21
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJakeInEurope
MicroLab Speakers B72 RCA adapter plate fix
Replacement backing plate where the RCA jacks connect to the speakers. The wood broke so I created this. See pics.
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLeon Brocard
Microlab 1U Hive Hub tray
I love CB4D's Microlab - Mini Modular Home Server Rack . This is a tray for the Hive Hub , although mine has a grey logo so the new one might be slightly different. It's an easy print without supports. I used OnShape to sketch it out.
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
Printablesbigbluealien
Microlab RPi1B 0.5u tray
It might not be much use anymore but I couldn't bear to leave it out. Note this is for the Rpi1B NOT the B+, the B+ has standard position holes for mounting so doesn't need the snug fit of this tray
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesClaasWorks
Microlab - 3.5" LCD - 1.5u Tray + Col
The size of the STL files has been adjusted to match the LCD format.
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesVic
0.5U panel for Microlab 6 inch rack with 2 x 9 pin D-Sub + Powerpole connector
Half-U panel for Microlab 6 inch rack with 2 x 9 pin D-Sub and Powerpole connector. Can be used with: https://www.printables.com/model/1173286-microlab-mini-modular-home-server-rack/files
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTim
Home Assistant Green Insert for Microlab 2
This is a simple insert/tray for the Microlab 2 modular mini-rack system (designed by CB4D), made to securely hold a Home Assistant Green. It can be mounted on any side of the rack. I have printed mine in Prusament PC Blend Carbon Fiber.
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesVic
Microlab Panel Holding Peg
Peg to hold blanking panels on Microlab 6 inch rack. Screws or bolts are not needed to just hold the blanking panels, hence this model. Three sizes are published to suite different tolerances. Printing: I would recommend no brim if your…
- Pobrania
- 13
- Polubienia
- 4
- Ocena
- 0
P
Printables008 LAB
2U - 8 x 2.5in SSH/HDD TRAY HOLDER - MICROLAB COMPATIBLE
2U - 8 x 2.5in SSH/HDD TRAY HOLDER - MICROLAB COMPATIBLE I had 5 drives (1 SSD + 5 HDD) in my nas. Temperatures were running higher on the drives than i was comfortable with. The drives in the upper position had the heat radiating from…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesIsaac
GL-RM1PE Microlab 1U Rack Mount. POE Only
Requirements M3 screw of at least 6mm. You must power the KVM using POE, since the USB C is blocked. It might be possible to just put a hole on the slicer, but I dont think the clearances with the Microlab will work. How to use Slide the…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
Printables008 LAB
MICROLAB - LOGITECH K380 KEYBOARD HOLDER
MICROLAB - LOGITECH K380 KEYBOARD HOLDER Mount to hold a Logitech K380 bluetooth keyboard up & out of the way. Attaches to the base cap using 2 x M3x20 screws. If you like the print, you please drop a like!
- Pobrania
- 10
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJonathan McComb
Microlab 6-inch Pi tray with SD Card access to front
In some applications, it is preferable for a Raspberry Pi (or similar SBC) to be mounted with the USB/Network cables contained within the full rack, and MicroSD card access via the front panel. This remix has mounting points and a cut-out…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTim
Hue Bridge Pro Insert for Microlab 2
This is a simple insert/tray for the Microlab 2 modular mini-rack system (designed by CB4D), made to securely hold a Philips Hue Bridge Pro. It can be mounted on any side of the rack. I have printed mine in Prusament PC Blend Carbon Fiber.
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSidole
Microlab X2 satellite hinge lock
In the Microlab X2 and Microlab X3 acoustic systems, the satellites consist of two parts rotating in a horizontal plane. Over time, the hinge lock fails. This part was developed to restore the hinge of the Microlab X2 acoustic system…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
Printablesdaniellarsonwork
Microlab 2 Udoo Bolt
This should work for both the v3 and v8 version. Noticed no models were made for this and it fits perfectly. Ignore the incomplete portion, that was a mess up on my own filament getting tangled, not the actual slicing process. Can…
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTim
1U Vented Faceplate for Microlab 2
This is a vented faceplate for the Microlab 2 modular mini-rack system (designed by CB4D), designed to improve ventilation for components inside the rack. It can be mounted on any side of the rack. I have printed mine in Prusament PC…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTim
Hue Play Insert for Microlab 2
This is a simple insert/tray for the Microlab 2 modular mini-rack system (designed by CB4D), made to securely hold a Philips Hue Play. It can be mounted on any side of the rack. Since the Hue Play is almost as wide as the Microlab 2…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Petermann
Keystone Panel (Short) for Microlab
A keystone panel for [Microlab]( https://www.printables.com/model/1173286-microlab-mini-modular-home-server-rack )
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSimbo128
WSPR Kit 1u Rack Mount for Microlab mini modular home server
Introducing the 1u Rack for mouting the Worked All OARC 2025 WSPR Kit build. 1u Rack Mount tray designed to fit into the Microlab Mini Modular Home Server Rack. Has mounting holes for the RaspberryPi Zero2W / WSPR Hat and also for a small…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printablesdaniellarsonwork
Beaglebone Black 2U for Microlab V1
I didn't bother posting the first iteration because it wasn't fitting any cape on. Also mini usb port was blocked so really remodeled it before uploading. Should fit most capes just be weary of cables sticking out. Make sure to push in…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSimbo128
NinoTNC BLE board 1u Rack Mount for Microlab mini modular home server
Introducing the 1u Rack for mounting the BLE adapter board and NinoTNC. 1u Rack tray is designed to fit the Microlab Mini Modular Home Server Rack. Has holes on the base to accept threaded inserts and holes behind the front bezel to…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printablesbroemere
Microlab2 TP-Link TLSG105 Switch Tray Fixed
Fixed the large gap in the original model
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Petermann
ReSpeaker XVF 3800 Microlab Top cap mount
a quick and dirty remix, so a Respeaker XVF3800 can be mounted on tob of a microlab rack
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Petermann
Microlab bottom panel mount for Speaker Visaton FRS 8M
I modified the originally solid panel to have holes to mount the visaton speaker, this worked but did slightly hang due to the weight, so i had my AI add some reinforcement ribs to increase stiffness. this goes to the bottom of the…
- Pobrania
- 0
- Polubienia
- 1
- Ocena
- 0
P
Printables
Microlab Panel Holding Peg
Peg to hold blanking panels on Microlab 6 inch rack. Screws or bolts are not needed to just hold the blanking panels, hence this model. Three sizes are published to suite different tolerances. Printing: I would recommend no brim if your…
P
Printables
Microlab - 3.5" LCD - 1.5u Tray + Col
The size of the STL files has been adjusted to match the LCD format.
P
Printables
Netgear GS105 switch rack mount for the microlab
The tolerances are a bit tight so you might need to sand it down a bit.
Wydruk około 2,21 €–2,71 € nettoWstępna wycena jednego wariantu