Wyniki wyszukiwania: minipc

Sortowanie

53 modeli

P
Printablesltlowe

Parametric Vertical Stand for Router, Switch, MiniPC, etc. (Fusion 360)

After making my original ER7206 vertical stand, I decided I needed some for other devices, so I recreated the model to be fully parametric in Fusion 360. The minimum you need to create a new size is the depth and thickness of the device…

Pobrania
299
Polubienia
42
Ocena
5
P
PrintablesHervea

Support/stand for minipc GEEKOM. Ultra light for optimized cooling - Adjustable

Support/stand for minipc GEEKCOM. Ultra light for better cooling. PETG or PC recommended because of heating. Freecad file included to suit your kneeds. If you download it, please like.

Pobrania
171
Polubienia
15
Ocena
0
P
PrintablesAndy McKay

Tripod Mount and Desk Stand Combo for Mele Quieter MiniPCs

This set contains a vixen dovetail bracket to attach to the MiniPC (Original source of bracket model: https://www.printables.com/model/821544-mele-quieter-3c-vixen-dovetail-mount), a tripod mount to accept the dovetail, and a desk stand…

Pobrania
111
Polubienia
11
Ocena
5
P
PrintablesLP3D

10 inch rackmount - Beelink EQ14 MiniPC

This is a fitted 10" rackmount for the Bee-Link EQ14. It has cutouts for ventilation, and a bottomless design to accomodate the router without going over 1U in height. Required hardware: Screws and cage nuts that came with your cabinet,…

Pobrania
110
Polubienia
11
Ocena
5
P
PrintablesLuca

Support for Mele miniPC and SVBony Power Box SV241

I remixed a Mele miniPC holder to add a support bracket for the new SVBony SV241 mini power box and USB hub. The holder can be mounted on any Vixen/Losmandy/flat bar with 2 M6 holes spaced 20 mm. The Mele miniPC is inserted in the slots…

Pobrania
93
Polubienia
3
Ocena
0
P
PrintablesFrAllard

Topton 120 mm fan holder for "fanless" MiniPC

Print two of these brackets if you have a MiniPC with the same aluminum casing profile used by many vendors, similar to the one popularized by Topton, as shown in the picture. Before downloading the model and printing, please measure your…

Pobrania
91
Polubienia
11
Ocena
0
P
Printablesandabata

Topton / Minipc modular extender

Extend a minipc to house an additional fan / harddisks. I used threaded rods to tie it all together.

Pobrania
88
Polubienia
10
Ocena
0
P
PrintablesCAD Kim

7840HS GenMachine MiniPC Board

I modeled the MiniPC motherboard of GenMachine. It was created by CAD Kim, an admin of the MiniPC Gallery on DC Inside

Pobrania
71
Polubienia
3
Ocena
0
P
PrintablesHigany

MELE Quieter MiniPC telescope mount tripod leg holder

Telescope Tripod leg clamp and holder for MELE Quieter MiniPC. Compatible tripod leg diameter: 40mm (Eg. SkyWatcher steel tripod for EQ-3, EQ-5, HEQ-5) Parts needed: 2pcs. M3*3*5mm brass insert 4pcs. M3*6mm screws. + + + Note: I remixed…

Pobrania
70
Polubienia
8
Ocena
0
P
PrintablesTh3Rom3

AK2 Plus Intel N100 MiniPC Baseplate (Benchtable-style Case Alternative)

The original case of my Firebat AK2Plus MiniPC choked the SoC to death, so I stripped everything I did not need and started working on a case alternative. This is the first stage of this project, a minimalistic baseplate for the AK2Plus…

Pobrania
67
Polubienia
7
Ocena
0
P
PrintablesFlintyk

Holder for miniPC maibenben PCJ4/M1T/GMK Nucbox S

Holder for miniPC maibenben PCJ4/M1T/GMK Nucbox S without holes.

Pobrania
53
Polubienia
6
Ocena
0
P
PrintablesKent McNeill

Better MiniPC shelf for 10" rack. Also Keystone faceplate and blank with logo

Better MiniPC shelf for 10" rack. Also Keystone faceplate and blank with logo

Pobrania
41
Polubienia
5
Ocena
0

soporte minipc

soporte para mini pc

Pobrania
40
Polubienia
2
Ocena
0
P
PrintablesMichael Hessi

Vesa 100 mount for ThinClients, MiniPCs, etc.

E N G L I S H Remix of ChristophB's mount for the HP ProDesk 400 G2. But can be used for ALL Mini-PCs* with Vesa 100 mount. I wanted to hang the computer in such a way that no dust falls on the ventilation openings, even if it is sucked…

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesHigany

MELE Quieter MiniPC desktop stand

This is a desktop stand for the MELE Quieter. I made it for the version 2D, but probably fits the newer ones too as they are the same size. (The v4 was the newest at the time of uploading)

Pobrania
34
Polubienia
4
Ocena
5

Minipc plate for rack 10"

Plate 2U for mini pc GMKtec 129,5x129,5x55,1mm, includes 2 keystone for usb, 1 for HDMI and 2 for LAN/WAN. In one picture you can see i had problems with some overhangs, but was my fault with supports, but if you want performance this…

Pobrania
33
Polubienia
2
Ocena
0
P
Printablesdav12

MiniPC Stand

A friend needed a stand of his HP miniPC which is 37mm wide.

Pobrania
33
Polubienia
3
Ocena
0
P
Printablesbigrjsuto

MiniPC Full Case with SSD, Optional extra NIC

Print with PETG or other material that is more temperature resistant, at least for the Top piece, since it is hit by the fan exhaust. In the slicer (Cura), I set Top/Bottom Layers to 0, Infill Multiplier to 2, and Extra Walls to 2. Should…

Pobrania
33
Polubienia
8
Ocena
0
P
PrintablesIllia Dudnyk

OnStep MiniPCB2 Case

I designed my minipcb2 board case for OnStep. The board project is here Minipcb2 . The case has 2 holes on the back side for various fasteners with a distance of 30 mm ( mounts ). Print settings Material: PETG Layer Height: 0.2 Infill:…

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesAlex. Di.

MiniPC GenMachinepc low cover

The bottom cover is open (without a solid base) with feet for improved ventilation, which reduces the overall case temperature. The feet have notches designed to hook onto the bolts of a VESA mount. I was off by a couple of millimeters on…

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesPaul Hardwick

MiniPC VESA mount for HEQ5

Designed for quick fitting, it is sturdy enough for my 900gm Minix NEO Z100-0dB fanless PC. Hole spacing is 75mm. My mini PC comes with a metal plate which I bolted to the frame, the PC just slides on. Printed in PETG. The thread has…

Pobrania
29
Polubienia
4
Ocena
0
P
PrintablesKent McNeill

10" rack MiniPC shelf - improved

Created airflow, strength and accuracy

Pobrania
27
Polubienia
4
Ocena
0
P
PrintablesHawkeye

MiniPC hanger with Universal Vesa Fit mounting patterns (for Berlebach planet tripod)

This is a MiniPC hanger with UNIVERSAL VESA FIT mounting patterns for the Berlebach planet tripod.

Pobrania
27
Polubienia
7
Ocena
0
P
Printablesd.revan

OnStep MiniPCB Teensy Housing with 4010 Fan

This model is a housing for the OnStep MiniPCB2 Controller board using the Teensy 3.2 or Teensy 4.0 arduino board. More details regarding the electronics can be found on the OnStep wiki at https://onstep.groups.io/g/main/wiki/8768 OnStep…

Pobrania
26
Polubienia
3
Ocena
4
P
PrintablesHigany

Fodenn F30 MiniPC telescope mount tripod leg holder and power button protector

Telescope Tripod leg clamp and holder for Fodenn F30 MiniPC. Compatible tripod leg diameter: 40mm (e.g. SkyWatcher steel tripod for EQ-3, EQ-5, HEQ-5) Parts needed: 2pcs. M3*3*5mm brass insert 4pcs. M3*6mm screws. This MiniPC has a power…

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesCasian

Acer minipc cooler mount

This is a cooler mount for a Mini PC Acer Veriton N4640G. Needs M3 heat-set inserts where the red dots are. Using original bolts from pc. You need an angle grinder to cut the original screw holes in the bottom casing. Cooler ID-Cooling…

Pobrania
23
Polubienia
4
Ocena
0
P
Printablesbigrjsuto

Bottom Cover for Datto MiniPCs

I am using M3x10mm SHCS for this design. You should be able to use longer (maybe 20mm?) since it threads into a thru hole.

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesMarobi1958

MiniPC standard

A simple miniPC standard, best printed in PETG. MiniPC height = 50mm

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesHugo Kim

MiniPC Switchbot mount

For the mini-pc, it is so difficult to keep the switchbot attached. I made this to keep it on. This will allow you to turn on/off using switchbot. Short Version need some additional support. Long version can stay on.

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesStevanastardust

2020 MiniPC/Raspberry Pi Terminal Stand

I made this to as a small standalone terminal for a mini pc I am developing interactive displays with but it can also be used as a small PC for raspberry Pi's or even as a second monitor. I designed all the parts to be printable on most…

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesDeliciousDandy

MiniPC Monitor Holder

A holder for minisforums minipc to be attached behind the monitor. Quick solution to hide cables behind the monitor

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesSenior Tomato

Minipc DIN mount

Compatibility: Standard 35mm DIN rail (TS-35) Mounting: Secures Mini PC using M3 screws (8mm length) Mounting hole pattern: 70mm diamond (rhombus)

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesAaron Mak

MiniPc wall mount

For MINISFORUM UM690 Slim Mini PC 13cm x 13 cm x 5.6cm, perfect ajust. 2 models - Complete closure - Semi closed + clip. Printed in PLA without supports, 0,15 layer height.

Pobrania
17
Polubienia
2
Ocena
0
P
Printablestyler

MiniPC Frame Clips for Anycubic i3 Mega and Monoprice Maker Select (Octoprint Server)

These are frame clips to attach a W5 Pro Mini PC to the side of a 3D printer. I've included clips for the Anycubic i3 Mega and the Monoprice Maker Select. The clip is designed in a way that the Mini PC can be removed from it easily enough…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesIllia Dudnyk

OnStep MiniPCB2 Case Mounts

I designed mounts for my minipcb2 board case . The board project is here Minipcb2 . mount for tc40 tripod mount for horizontal tube mount for vertical tube Print settings Material: PETG Layer Height: 0.2 Infill: 40% Assembly 1pc rc…

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesKamil Kaleta

HP T630 MINIPC FAN MODULE

Fan module designed for a HP T630 terminal. What you need is: 1. Two 40mm FANs. Im using 40/28mm 12V. 2. W1209 Cheap thermostat 3. M2/6 screws 4. 12V DC power supply Print with no supports. You can find the propper model orientation on a…

Pobrania
14
Polubienia
1
Ocena
0
P
Printablesjtessnear222

MiniPC Stand

This Mini PC stand was created specifically for the Optiplex 7000 but may fit other models. The heart is no longer on the model, that was the prototype.

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesRudiZ

Wohnmobilgehäuse Geekom MiniPC A5 -Einsteckmaße 117 x 112 x 49 mm

Dies ist ein Gehäuse für den Geekom MiniPC A5 mit dem einsteckmaßen 117x112x39 mm, habe es für mein Wohnmobil entworfen, es kann aber überall montiert werden. In der dargestellten Form ist es ohne Probleme Druckbar. Hoffe ihr habt auch…

Pobrania
13
Polubienia
2
Ocena
0
P
Printablesmthqwork

MiniPCI Wi-Fi card holder

I have attached the SCAD file as well, so You can fine tune it to your needs. It should hold any MiniPCI card, like modems, not just WiFi.

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesLuca

Holder for the Mele 2 Quieter miniPC

I have just added chamfers and a recessed slot for the M3 bolts which go onto the backside of the Mele Quieter 2 (cylinder hex head). All the rest per original.

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesAlex Halemba

10" Adapter Geekom Mini Air12 MiniPC

1U 10" adapter to integrate a Geekom Mini Air12 into the server rack. I printed it using the 0.20mm, SUNLU - PETG profile without any supports.

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesBrent

HSW MiniPC Shelf (Stackable)

This is a shelf to allow you to hang a Lenovo M93P on a Honeycomb Storage Wall.

Pobrania
11
Polubienia
4
Ocena
0
P
Printablesjonasfj

VESA backet for mounting minipc

A bracket for mounting a mini PC under the table. This assume the mini PC has VESA compatible holes.

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesGasemans

Zotax Minipc Wallmount bracket

Zotax Minipc Wallmount bracket I use a zotax mini pc for my home assistant and wanted to have i mounted to the back

Pobrania
9
Polubienia
1
Ocena
0
P
Printablesalgobub

Beelink MiniPC Bracket

This mounting bracket provides a convenient way to mount the Beelink MINIS 12 PRO mini PC—or similar 104L x 116W x 40H systems—to an equatorial mount, wall, desk, equipment rack, or other suitable surface. The bracket features a mounting…

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesMiguel Garcia

Mele miniPC + SVBony power hub Bracket for 30mm tripod center column

Mele Mini PC + SVBony Power Hub Bracket For 30 mm tripod center column with removable end cap (required for installation) Compatible with photographic tripods that have a 30 mm diameter center column . Secures a Mele Mini PC and SVBony…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesCyanoger

I/O shield/backplate for Fujitsu ESPRIMO G558 USFF MiniPC/Nettop

Some units gotten from the recycling without these, so I had to resort to making these myself. Designed specifically for G558, however it's known for other generations of the same family of computer to exist with similar or the same IO.…

Pobrania
6
Polubienia
0
Ocena
0
P
Printables

Vesa 100 mount for ThinClients, MiniPCs, etc.

E N G L I S H Remix of ChristophB's mount for the HP ProDesk 400 G2. But can be used for ALL Mini-PCs* with Vesa 100 mount. I wanted to hang the computer in such a way that no dust falls on the ventilation openings, even if it is sucked…

P
Printables

MiniPC Monitor Holder

A holder for minisforums minipc to be attached behind the monitor. Quick solution to hide cables behind the monitor

P
Printables

Dell Optiplex 7050 Micro MFF Front Bezel / faceplate (face avant minipc)

I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…

P
Printables

MiniPC Stand

This Mini PC stand was created specifically for the Optiplex 7000 but may fit other models. The heart is no longer on the model, that was the prototype.

P
Printables

Topton / Minipc modular extender

Extend a minipc to house an additional fan / harddisks. I used threaded rods to tie it all together.

P
Printables

10 inch rackmount - Beelink EQ14 MiniPC

This is a fitted 10" rackmount for the Bee-Link EQ14. It has cutouts for ventilation, and a bottomless design to accomodate the router without going over 1U in height. Required hardware: Screws and cage nuts that came with your cabinet,…