2732 modeli
I recommend printing the Solder Scroll tool and the modified spool from PETG. Press the larger area onto the backing, then snap the two parts together. After winding the soldering wire, clip it with the wire cutters flush with the coil.…
T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…
The PrusaWatch - Individually modifiable band/strap in for watches in TPU As you can see, I decided to create a watch strap. There are many straps, so I wanted to design one that stands out from the rest. The result is the PrusaWatch…
Since I needed a liftarm with holes instead of crosses and in regular as well as half thickness, I constructed a 3x5 and 3x5x0.5 liftarm similar to the Lego - parts 99773, 65193, 2905. Print the liftarms in STL orientation with support on…
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
To use this, you will have to increase the size of all model parts to 135% !!! (the menhir is already resized) After the first print of Obelix (https://www.prusaprinters.org/de/prints/127997-obelix), I had the idea of using the menhir as…
The lid insert has a holder for brass inset adapter ( this one https://de.aliexpress.com/item/1005006503495825.html ) and needs two 6x3 magnets. Step and f3d file included. PART_ files contain the parts only, SLICER_ files include parts…
A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…
Designed for Noctua 140x25mm fans, these spacers can improve acoustics and performance in suction or “pull” type applications. Read more from the original Noctua design:…
This is a modified version of the standard 19.5 mm ground glass spacer that comes with the Lomograflok Instax Wide Film Back. This should allow you to achieve sharp focus at wide apertures with a Speed Graphic that has a Fresnel focusing…
Remix of the original Prusa LCD cover I only replaced the text “ORIGINAL PRUSA” with “modified PRUSA”. The length of the line above “modified” is the same as on the original case.
7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933
Remixed the "Hummingbird Feeder Replacement Parts" Top part by shrinking it down to fit my no-name hummingbird feeder. Scaled down to 71mm in narrowest dimension and it fits perfectly! Printed mine in Yellow ASA with full support enabled…
These clips are used to seal your open potato chip bag. Three sizes are available. Because there is a large printing overhang for the tabs, I included tree supports which removed easily.
Update 24/08/2023 : Add of an easiest way to plug a fan to your Mox with a unique part to print. The Turris Mox is an modular, open source and secure router. Even though this is a great router, it tends to get hot and reboot. To fix it, I…
Das originale Honigwaben-Design fand ich sehr schön und luftdurchlässig, so das ich es für einen 60mm Lüfter aus einer alten Grafikkarte modifiziert habe. Diese Abdeckung der Elektronikbox ( xBuddy Cover ) ist sehr passgenau. Dank an…
I created these 40mm wide Tokens for the Traveller RPG game to help players keep track of their modifier penalty due to damage to their character. The tokens are double sided ; -1 on one side and -3 on the other side. The tokens are made…
the part is split in two parts because its to big for the prusa xl its split with dovetail . i have printed in pla and glue together with hot glue you can use two part glue kit also. there is also a connector voor de hoses
If you use the Coral Accelerator with the LimeLite and you use this (or the original) bracket, see the back-mount Coral bracket here https://www.printables.com/model/908221-coral-accellerator-bracket-for-limelight-bracket
La pièce d'origine ne plaquait pas sur le sélecteur Finda. (voir photo). Peut-être que mes lames sont trop épaisses? La découpe des filaments trop avancés dans le MMU fonctionnait mal. En supprimant les bossages, les pièces joignent…
Found this amazing model of an Ender 3 v2 to make mods for. This will save you lots of time and headaces. This STEP file allowes you to make designs for the Ender 3 v2 without having to mesure everything on the machine. I used Fusion 360…
DUMMY 13 resized to 200% with a few alterations. 200% feels like how this model was meant to be. This model does rely on strong materials, I’ve had good results with high quality PLA. I've added a couple of test STLs so you can test your…
This is a modified chest for the Dummy 13 posable figure by @soozafone for large, scaled up prints for easier assembly. The ball joint of the Dummy 13 figure uses a slightly undersized socket to provide the necessary friction. When…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
I had to slightly modify the filets on CSD_Salzburg's excellent SKADIS Universal Hook system, as on my particular Skadis they were a tad loose. Included are STEP files for a hook with my modified filets, a hook without filets so you you…
MagicShrimp made covers that can be installed on the Elegoo Centauri Carbon to stop debris from getting under the bed.In the second batch of printers the bed mount was changed, so I modified MagicShrimp's design to suit batch 2. You'll…
For more detailed info, watch the YouTube video: The modified nut may not be needed. The modified lever is a drop-in replacement that shouldn't cause any issues but may resolve issues with poor grip on the filament.
remixed by: White JackaL Made the stand more stable. Print on its side so you dont have to use suports. Printer: Ender-3 Filament: PLA Hotend: 205c Hotbed: 50c Resolution: 0.2mm Infill: 15% cubic Subdivision Speed: 30-60 mms Print…
These are a portion of the files from https://blog.prusaprinters.org/mmu2s-printer-enclosure/ that have re-arranged/modified for printing on a Prusa Mini It doesn't include these parts because I assume you are enclosing a mini and don't…
Try one corner clip if it works for you.
Warning: this mod is experimental and needs engineering and mechanical background to build. No guarantee and very little support provided by me. This is a modification you can add to your MK3s to be able to print 90° overhangs without…
This gcode is based upon the great work of Thrutheframe, though I ended up removing or changing a lot of his alterations due to them already being folded into the current P1S stock gcode. So these files don't change motor voltages (Bambu…
This is a remix of this bag clip: https://www.thingiverse.com/thing:4027950 which goes back to https://www.thingiverse.com/thing:3238736 . Modifications are: 1) The insert has two stops. One prevents it from falling into the bag and the…
I like the original katana for lucky but the guard felt lacking to me so I model up a quick guard and edited the origin i printed this with the normal printing settings as lucky 13 (super glue required when putting the guard on)
This is a modification of the ubiquitous PS5 controller mini wheel add-on by pixel2: https://www.thingiverse.com/thing:4693372 Here is a video of it being printed and operated: https://youtube.com/shorts/xQ8_doe1zzo My modification…
Про то как пользоваться этим приспособлением я рассказываю в этом видео: https://boosty.to/internal_engineer/posts/2f7f2e46-ffed-48f4-83ae-be5985ef6b76 Если у вас закусывает верхнюю втулку оси X, эта 3D модель + наждачная бумага поможет…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
Latest Update All other previous updates will be posted at the bottom. Update (4/18/2023) *Updated file - Light_Bar_Design_Final_4A to 5A and Light_Bar_Endcap_2B to 3B Based on the feedback received from @suit , I added detents that will…
These models are directly from Elegoo, they are replacement parts/upgrades for their FDM printers. Some of these come preloaded on their usb drives. I've pre-ordered a Neptune 4 Pro and will post prints once I have it! Elegoo Neptune 2,…
Flash Forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification Reinforced weak areas in the print. (fail areas) Can be printed in standard PLA. The front section thickness increased. Front-facing plate has room for your…
This is a remix of Agustin Flowalistik's Chainmail: https://www.prusaprinters.org/prints/286-chainmail-3d-printable-fabric It uses 9 of his sample sized models in order to fill the bed of the Prusa Mini. Print instructions This print came…
The foot part is longer, chest a bit bigger and head slightly rounder and narower. Plus I've added helmet and katana which was edited from the staff.
Printed in PLA with 15% infill with supports. PETG would have been a better choice but did not have it. PLA have been coated with epoxy and spray painted in black. Can't find the original files on this website anymore, still had the files…
This medieval castle print was modeled from two European castles that are both majestic and have very interesting construction and incredible views. Schloss Lichtenstein and Neuschwanstein Castle, both located in Germany. I modified the…
Fits into the newer ashtray railsystem (after 96, i think.) modified some parts for better printing in PETg on Prusa MK3S: cupstand arms were strengthened because they broke easily on low res prints the front panel was split into 2 pieces…
So, this is my version of a Linear Rail Prusa Bear. Thank you to Grégoire Saunier for his fantastic work on the Prusa Bear, as this provided me with a fantastic starting off point. This will continue to be added with details, but the…
Kleiner Pokal für zweifarbigen Druck (Sockel und Pokal sind separat). Beide Teile sind modifizierbar um zum Beispiel einen Text auf den Sockel zu drucken. Support bei den Griffen am Pokal empfohlen. Beliebig skalierbar. Befestigung der…
A simple Case for the NVIDIA Shield Remote. There are two versions, with access to the Netflix button and without: “With Netflix” to have the button NOT blocked “No Netflix” to have it blocked The back is flat so the remote can actually…
Please use the updated version: https://www.printables.com/model/359020-bambu-lab-p1p-modified-led-mount-20 Updated version of this model with better cable management and a redesign of how the LED board is fitted in place. Description…
Edit: 09-May-2023: Part #3 added: Before I printed my spooler I dragged every part into TinkerCad, an assembly. Two parts I remodelled marginally: The big base part was reported to be poorly fixed on your workbench, so I extended the base…
Liked? Like for the sake of decency, do you think it’s easy to create modifications? Modification for belt tensioner Creality K1, K1C, K1 MAX Gives greater stability to the tensioner; with its help, possible distortions are eliminated.…
This slightly modified main plate for the Nextruder was motivated by a few filament jams, where flexible filament (Shore 90A) got stuck between the extruder main gear and the stepper motor. This path is now blocked, which should hopefully…
This is a modified steering bar which better fits the dimension of a standard DS3218 servo. Print with supports.
This is a set of tilting stands for the Surefeed Pet Feeder, model MPF001. It's a modification of Wolf_Jameson's Surefeed Pet Feeder Adjustable Stand , specifically his model 2 version. He used screws to install pins to hold the stands in…
The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs. Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)
Original model for the Heltec V3 by Muziworks: https://www.printables.com/model/741974-h1-case-for-heltec-v3-running-meshtastic This is a modified version of the original H1 case by Muziworks. I wanted to play around with a Heltec V4…
Ok... the original model is a beautiful work of art. There are, however, several issues with it. After no replies from the designer, I took it upon myself to repair the model and modify it for my own needs and to suit my own tastes. NOTE…
Hinges for a Flashforge Adventure5M. These have had the hole placement moved for better door swing. Door will not hit the frame now.
Improved taller enclosure for the FlashForge AD5X. These alternate parts and additional parts increase the overall height by 64mm, this gives proper room and clearance for the PTFE feed tubes, There is also a cowl that installs over the…
Update 30.11.22: English translation added (scroll down) Ich habe vor ein paar Tagen einen Sculpfun S30Pro Lasergravierer bekommen. Die Maschine ist klasse, benötigt aber meiner Meinung nach ein paar Optimierungen: 1. Cablechain Die lose…
During assembling my MK4 I realized that I was not able to perfectly align the y belt and after closer inspection, I saw that the motor is slightly canted when tightening down the screws, since the thermal pad is slightly thicker and not…
Thank you Enigma for the very nice design. It printed well and snapped together with ease. I did find that using the original lower lip dispenser design, if you pull a soda can too quick other cans wanted to follow. So I designed a quick…
Printed using Anycubic red PLA, 15% adaptive cubic infill and 2 parameters.
The original article is well done, I needed to adapt it to a specific case, I ended up modifying the fit of the 2 pieces.
Update (2023/7/13): Added the “WithRegister” variations for the TopBody and BottomBody The RegisterCube can be used to align the top and bottom body when gluing the two parts The RegisterCube is 0.2mm smaller than the register holes,…
This is a remix of Wire Splice Mold by t2pain2 on Thingiverse https://www.thingiverse.com/thing:6316585 Changes from the original: - Split into two models for easier slicer arrangement. - Re-scaled to properly fit 14AWG wire without…
so yah, as title says, this is basically a remix I designed. I took the light bar dimensions and whatnot and then made this model based on my likings. The one that BL suggests printing points the LED's at a strait across angle. basically…
Same enclosure, I just removed the personal logo inlay from the pieces.
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
I've solved some errors in the lower part and modified the top part to have space to use the GPIO pins from outside and have the pin to fit a 30x30 mm fan without screws. The fan is oriented to blow air inside. I've removed the holder,…
This is a remix of the Mechanical Tally Counter 5.0 by FredrikHamrebjorkDesigns. I modified the Left and Right buttons, and the Back Cover. All other parts can be printed downloaded from the original model maker's page: Mechanical Tally…
Modelo modificado a partir del realizado por el usuario tksgeo La idea de mi modificación era hacerla compatible con una luz led de botón , sin necesidad de conectar cables y tener así un diseño más limpio. Para mantener las tapas en su…
Updated Version of the great mounting blocks from the original model for newer MacPacs
Staunton (Modified) Chess Set The Staunton chess set is composed of a style of chess pieces used in competitions. The journalist Nathaniel Cooke is credited with the design, and they are named after the English chess master Howard…
This is a slightly modified version of the MK3s heatbed bottom cover. I added a rear support for the cables with a channel for a zip-tie. This does add an additional 9mm to the length of the part, so tight enclosure/wall spaces should be…
This honeycomb grid add-on fits the Aputure MC video lights . Due to it being friction mounted, there is no need for any modification whatsoever to the final print for it to stay attached. Just snap it onto the light and you're ready to…
These are the parts I constructed to modify the monobloc air conditioner PAC EX100 from DeLonghi from 1 hose to a two hose setup. The parts are relatively big, since the air intake area on the air con is quit big. The parts fit the Prusa…
A pre-made 3MF for Bambu Studio that has a swatch card and a modifier already set up.
I created these files for my Wood PLA Youtube video. After you open the file you can replace test wood plank with any STL file you like. Then resize, rotate and move the modifier to get the wood grain look that you want. I will add more…
I made the original DeSteiner M1887 2 years ago, and recently I revisited it, so why not making a variant with stock and a long barrel? I combined barrel-tube part 2 and 3 so that I don't have to assemble them and to reduce connection…
Can be printed without support
This is a recreation of @Rainers original Car phone mount https://www.printables.com/model/97310-car-phone-holder-samsung-cd-mount - this mount printed and worked almost perfectly for my requirements. I've just moved the front up a little…
I modified this for use with Tetrix pieces. This design has become my most popular and I want to credit it's original designer. See the remixed design Print Settings Printer: Qidi tech Rafts: Doesn't Matter Supports: Yes Resolution:…
A modified manual Turntable for 3D Scanning that doesn't need ball bearings or thruster. Just add any grease to the circle under the middle round platform. For it to stop moving on surface i bought non slip sticky pads on amazon and it…
Remix of the grain scoop by tray_withdraw at https://www.thingiverse.com/thing:3544205. Closed the hole in the handle, greatly increasing its strength and keeping stuff out of it.
I didn't want to spend the time needed to print certain parts of the https://www.printables.com/model/560402-stargate-with-iris-80cm-in-diameter Chevrons with supports that were difficult to clean later. I also needed the central light to…
Sanding Block - No Screws MODIFIED VERSION PETG, PLA, etc Layer height 0.3mm 3mf (and gcode) file pre-scaled 60% infill (doesn't really matter) No skirt or brim 25mm wide, about 33mm high and roughly 82.5mm long. Cut the sandpaper to…
All plate, modified LEGO Brick from the application LEGO Studio. 27 real Bricks LEGO (with the logo on it)
*** UPDATE *** Apparently the front arms (that I didn't modify) were an issue, so another user has done their own remix to fix those up too, which you can find here:…
I've uploaded these here as there appeared to be interest on a Reddit thread but note that this is a work in progress. The main guides and parts were all printed in Yellow Elegoo PETG Rapid and the rise blocks in JAYO PLA+ Grey as I ran…
UPDATE March 2025 All please NOTE …. this is valid for all of my Sculpfun related designs: The Sculpfun modells AND accessories incl 3rd party DO COME WITH VARYING SIZE PARAMETERS. My Laser Frame size is: X-Direction 510mm and Laser…
UPDATED 2023-07-07 - version 1.1. Added new features and presets (for HueForge and a single-panel swatch aimed to use with colorimeter Nix Mini 2), plus a new set of STL (Nix Mini 2). The STLs for HueForge calibration can be found here at…
BOM is the Same as the original, aside from the 8 magnets I used to hold the basket in place when rotating. (Fits my 18g ridgeless VST basket nicely) I used blind holes on my design to give the upper part a cleaner look. The use of a…
An Ender 3 (Pro) X-axis motor cover with a modified endstop mount to make full use of the bed in the X-direction. It always bugged me, that the leftmost 3 mm of the bed were out of reach for the nozzle on my Ender 3 Pro, because the…
I couldn't find this on Printables. This is not my work; I am only uploading with credit to the original from Thingiverse under CC. Original description from creator: This is a remix of Ed 209 from Robocop by GHathaway. Thanks for such a…
For English please roll down. CZ: Přepracovaná verze odklápěcího víka pro Original Prusa Enclosure Vlastnosti: nový systém zámků víka není potřeba otáčet víko = hladší víko bez závitových výstupků, ideální pokud používáte pro odkládání…
Adding a quick description for now. Elegoo published an adapter to allow for use of flexible filament with their CANVAS system for the Centauri Carbon 1 (and also CC2). However, it has a main problem: it does not work with the fittings…
Allgemeines Remix des bekannten “Top Mount spoolholder” für den Kingroon KP3s. Meine Version beinhaltet 3 wesentliche Änderungen: der Halter wird fest am Drucker verschraubt (benötigt 2stk M5x20 Innensechskantschrauben) der Haltearm wird…
This is a modification of Meister Edel design “strong flying propeller / pullcopter (No Suppoerts)” which sets off already quite fast and the flying propeller goes really high. Thank you for your nice design! But … I asked myself what to…
Im using an Ender V3 SE, print standing up, no supports necessary. .20mm speed
