39 modeli
Creality Sonic Pad G-Sensor for CR Touch or BLTouch Mount for Ender 3S1 or Upgraded SpriteExtuder upgraded Ender3v2. Y-axis zero offset. Prove offset: x_offset: 40 y_offset: 0 Links: JST 1.25mm both female 5pin cable:…
Feb 10, 2024 : STEP file added. -- Print details: Material: PLA, PETG, ABS, or any filament you like. I use Overture PETG Black. layer height: 0.20mm Supports: You only need support for the big hole. I recommend to use Paint-on supports.…
mac mini 2024 vesa mounter(75 and 100)
Material: PLA Layer Hight: 0.2 mm Nozzle: 0.6 mm or smaller Build Plate Adhesion: Skirt 3
I'm remixing the existing SnakeOilXY's DIN rail mounter design for BTT Octopus/Pro board to fit Mellow Super 8 board there's already DIN rail mounter for particular board included in the printer design package but as two pieces parts and…
Mounter of laser pointers with outer diameter of φ14.6 mm for optical post When twisted, the switch is pressed and the laser pointer is turned on. The optical post fits a 1/2 inch diameter or 12 mm diameter. The slit version will fit even…
Cable chain and Remix 5015/4010FAN mounter for Kingroon KP3S. The sensor arrangement described in robin_nano_cfg.txt of the 3D-touch compatible firmware is the same as the reference model. refarence model :…
You can mount your Arduino NANO on a wooden board with this holder and 4 screws. It is good for direct soldered wirings. You can push the reset button easily. Easy access to the USB and ICSP connectors. Prepare 4 pilot holes in 17 mm x 55…
We've designed the lightweight mounter for the 4010 Hotend Fan, 5015 Section Fan, and 3D touch to the Titan Extruder model and share it. The sensor layout we have to describe in robin_nano_cfg.txt of the 3D-touch compatible firmware…
We've designed the FAN mounter to promote air circulation in the SUNLU 3D Filament Dryer Box S1 and share it. SUNLU 3D Filament Dryer Box S1: Amazon .com https://www.amazon.com/dp/B08C9RZPMN SUNLU 3D フィラメントドライヤボックス…
FreeCAD source codes are parametric.
When I bought the ParkTool JH-2 holder I soon realized that the original plastic is kinda brittle. Additionally I am also using 1/2'' drive fittings and I want to store hex bits, not only 3/8'' I think I will add 1/4'' soon :) I also…
We've designed the slim and lightweight mounter for fix the 3010 Hotend Fan, 5015 Section Fan, and 3D touch to the Titan Extruder model and share it. This part relies on ribs to secure the 5015. Please be sure to check the preview of the…
You can mont btt sfs on the motor panel. You can print this part with VORON 0.2. Just replace original motor panel.
Holder is 48mm wide and 42mm high
MagnetSize: φ6mm height: 2.5mm (for japanese: セリアの超強力マグネットミニ8P が適合) Pause printing before top-cover, put in magnet.
These boxes are excellent and my new favourite thing! I've created this to allow me to mount them underneath a side table in our lounge. This will help keep the cables tidy and hold the remotes. Printed in PLA with a 0.6mm nozzle and…
In the laundry room we needed a paper roll holder. The current one we had was kind of a bad shape and badly missplaced. The design is fairly simple. One base mounting plate, two threaded rods and an end screw. Assemble them that suits you…
Remixed for using m5 srews for mounting
I made a 3 mm diameter pin to mount the 4010 fan on the duct. https://www.thingiverse.com/thing:3796022 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: SainSmart TPU…
Rebocap用のトラッカーベルトのマウンタです。 Mounter for tracker belt for rebocap
I designed the parts to fix the Raspberry Pi on the PSU and hare it. We can attach to PSU with M4 screw holes 49 mm apart, such as Kingroon KP3S / Ender3 Pro. I checked the installation with 3 model A + and 3 model B of Raspberry Pi.…
Hello there, If you're looking to mount a Raspberry Pi with a touch screen on your printer, here's my approach. I aimed to avoid increasing the width of the printer due to space constraints, so I positioned it at the front. The mounts are…
Just a simple adapter to mount the ADXL345 sensor on the HevORT carrier. How to use the sensor with Klipper : https://www.klipper3d.org/Measuring\_Resonances.html Category: 3D Printer Accessories
Mount a 3-pin IEC320 C14 Inlet and fused switch module under a DAISO Joint rack wire-meshed shelf! ダイソーのジョイントラックの転び止め棚の下に3ビンIEC320規格C14インレットユニットを固定するための箱 Requirements: * 1 powermounter.stl * 2 daiso.stl * 1 power connector with fused…
Easy to attach and detach on the MET. ABS, PLA, both are available. It's not sophisticated design but it's functional anyway. I need to improve my paint skill... Go pro adapter works as well. Print instructions 100% infill
This is a mounter for SESAME Touch to ease its battery changing. SESAMEタッチ の電池交換を楽にするための取付用フレームです。
This is a wall mounter for Linksys Velop WiFi router.
These small wedges can hold your Logitech Keys keyboard in some height and rest your wrists.
Wire mesh hook/mounter for Bose M2/M3 (Computer Music Monitor) active speaker.
I designed the parts to fix the camera of Raspberry Pi on the PSU and hare it. We can attach to PSU with M4 screw holes 49 mm apart, such as Kingroon KP3S / Ender3 Pro.I checked the installation with 3 model A + and 3 model B of Raspberry…
A simple desk mounted awg cable spool holder. Warning the Photo don't show the default values. You might need too adjust the values in Freecad. If you want to use M10 screws for desk-mounting, instead of press-fit, you can 3d Print them.…
an MG995R mounter. Use an M3 screw. Print on an incline or vertical plane if you dont want a weird support through the hole. heat the screw up if it doesnt go in the first try
This is a holder for 3 bulbs, you slide the base into the hole and then put a socket in it. It is an alternative and improved version of a previously published model. For an E27 base the diameter of the bulb holder must be 20 cm. The…
Default distance of centers of two 2020 aluminum extrusion profiles: 320 mm It can be changed in parametric FreeCAD source code. Requirements: Mounter plate Stepper motors M3 screws M3 washers M4 screws M4 washers M4 T-nuts
Multi-plug power cables unnecessarily take up floor space in homes and offices. Many lack the necessary holes for wall mounting. I used to try opening them up and drilling holes in the back covers to mount them on the wall, but the back…
kickstarterで届いたDNSYS Z1 AEROをDNSYS X1と合体させるのに便利な膝前ベースを設計しました。 必要な部品は 「X1-Z1 KNEE FRONT MOUNTER-L V1」×１個 「X1-Z1 KNEE FRONT MOUNTER-R V1」×１個 「X1-Z1 KNEE FRONT BASE-R V1」×２個 M3六角ナット×１２個（片足なら6個） M3－6以上の皿螺子×１２本（片足なら6本） 両面テープ付マジックテープ（オス トゲトゲ）適量…
an MG995R mounter. Use an M3 screw. Print on an incline or vertical plane if you dont want a weird support through the hole. heat the screw up if it doesnt go in the first try
